Compu-Fix

home *** CD-ROM | disk | FTP | other *** search

/ Compu-Fix / Compu-Fix.iso / misc / program1 / read_me.doc < prev next >

Wrap

Text File | 1993-03-01 | 58.0 KB | 1,205 lines

FILE: READ-ME.DOC Page 1 of 21 ================================================================ M E T R I C - X (TM) Version 2.02 ================================================================ The Metric - customary Inch/Pounds - Metric Conversion Utility Designated as an "ACCEPTED METRIC CONVERSION TOOL" by the ICMP/MOC Shareware from ORION DEVELOPMENT CORPORATION P.O. Box 2323 Merrifield, VA 22116-2323 Member Institute of Electrical & Electronics Engineers, Inc. (IEEE) American National Metric Council (ANMC) U. S. Metric Association (USMA) Association of Shareware Professionals (ASP) Copyright(c) 1991, 1922 by Orion Development Corporation. All rights reserved FILE: READ-ME.DOC Page 2 of 21 M E T R I C - X (tm) Version 2.02 ======================================================================== TABLE OF CONTENTS ------------------------------------------------------------------ 1. Introduction to METRIC-X, Version 2.02 ................... 3 2. Limited 30-Day Trial Period License Agreement ............ 3 3. Product Warranty and Limit to Liability .................. 4 4. System Requirements ...................................... 5 5. Starting and running METRIC-X (from a Floppy Disk) ....... 5 6. Installing METRIC-X onto a Hard Disk ..................... 6 7. Starting and running METRIC-X (from a Hard Disk) ......... 8 8. Entering a Number (for conversion) ....................... 9 9. Abbreviations (unit clarifiers) .......................... 9 10. Notational Form - Short-Cut Key ......................... 10 11. U.S. Survey vs International Units ...................... 10 12. Support Policy .......................................... 11 13. Definition of Shareware (from the ASP) .................. 11 14. Ombudsman Statement (required by the ASP) ............... 12 15. ICMP-MOC Designation Statement .......................... 12 16. Distribution Information (General) ...................... 12 17. Vendor/Distributor Limited License ...................... 14 18. BBS/Sysop Limited License ............................... 16 19. Distribution by User Groups & Government Agency ......... 17 20. Author/Publisher Information ............................ 18 21. Product Development/Upgrade History ..................... 19 22. User Feedback - Survey Form ............................. 21 ************************************************************************ * See the "REGISTER.DOC" file for PRICING and ORDERING INFORMATION * ************************************************************************ FILE: READ-ME.DOC Page 3 of 21 M E T R I C - X (tm) Version 2.02 ======================================================================== 1. INTRODUCTION TO METRIC-X ------------------------------------------------------------------------ METRIC-X is designed to be an extremely "easy to use", very accurate METRIC units -to- customary INCH/POUND units -to- METRIC units, DOS- based conversion program. This utility program has been engineered using ANSI/IEEE Std 268-1982 and FED Std 376B as a conversion factor base (for mathematical equations) and also conforms to ASTM E-390's specification, except for differences in spelling, ie: "ter vs tre", as in: meter vs metre, liter vs litre, etc. This program uses drop-down menus to display/select any of: 12 UNIT Categories, which include: Length, Area, Volume (Dry/Liquid), Force, Mass, Pressure, Temperature, Energy, Power, Velocity, Acceleration & Wavelength/Frequency. The total number of "Units of Measure" which are supported (including all prefixed base-units) is 179. There are several "unique features" which sets METRIC-X apart from the other metric conversion programs. All conversions are processed using the powerful technique of "double-precision calculation", which accounts for the program's high degree of accuracy. METRIC-X has been DESIGNATED as an "ACCEPTED METRIC CONVERSION TOOL" by the U.S. Interagency Council on Metric Policy's Metric Operating Committee (ICMP/MOC), and has been submitted for review by the: * Institute of Electrical and Electronic Engineers, Inc. (IEEE) * American National Metric Council (ANMC) * United States Metric Association (USMA) * National Institute of Building Sciences (NIBS) 2. LIMITED 30-DAY TRIAL PERIOD LICENSE AGREEMENT ------------------------------------------------------------------------ The METRIC-X shareware program may be evaluated FREE for a period of 30 DAYS only. Shareware is a "try before you buy" marketing concept and METRIC-X is NOT Freeware, NOR is it Public Domain software. If after using METRIC-X for 30 days, and you wish to continue to use this software product, you MUST REGISTER IT. By registering this software, you provide this program's author with a fair compensation for his effort and in return, YOU WILL RECEIVE: the latest version of the software on dual-media (both 5-1/4 and 3-1/2 inch disks), an illustrated 28 page User's Manual (soft cover), one (1) year of free technical support and discounts on future products and upgrades. If after the 30 day evaluation period you elect to NOT register your copy of METRIC-X, this Limited License has EXPIRED and (under the U. S. Copyright Laws) you MUST DISCONTINUE ITS USE. NOTE: If you were reviewing this software from a free, complementary, floppy disk, you are asked to please pass it along to someone who might be interested in this product. USING AN UN-REGISTERED COPY OF THIS SOFTWARE, CONSTITUTES ACCEPTANCE AND AGREEMENT TO THE TERMS OF THIS LIMITED LICENSE. FILE: READ-ME.DOC Page 4 of 21 M E T R I C - X (tm) Version 2.02 ======================================================================== 3. PRODUCT WARRANTY and LIMIT to LIABILITY ------------------------------------------------------------------------ ***************** IMPORTANT WARRANTY INFORMATION **************** *** PLEASE READ THIS INFORMATION CAREFULLY *** ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ TRIAL USE (SHAREWARE EVALUATION VERSION) WARRANTY: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The Shareware evaluation (trial use) version is provided AS IS. ORION DEVELOPMENT CORPORATION, MAKES NO WARRANTY OF ANY KIND, EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR PURPOSE. REGISTERED VERSION ONLY WARRANTY: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Orion Development Corporation warranties the physical diskette(s) and physical documentation provided with registered versions to be free of defects in materials and workmanship for a period of ninety days from the date of registration. If Orion Development Corporation receives notification within the warranty period of defects in materials or workmanship, and such notification is determined by Orion Development Corporation to be correct, Orion Development Corporation will replace the defective diskette(s) or documentation. The entire and exclusive liability and remedy for breach of this Limited Warranty shall be limited to replacement of defective diskette(s) or documentation and shall not include or extend to any claim for or right to recover any other damages, including but not limited to, loss of profit, data, or use of the software, or special, incidental, or consequential damages or other similar claims, even if Orion Development Corporation has been specifically advised of the possibility of such damages. In no event will Orion Development Corporation liability for any damages to you or any other person ever exceed the lower of suggested list price or actual price paid for the license to use the software, regardless of any form of the claim. ORION DEVELOPMENT CORPORATION SPECIFICALLY DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR PURPOSE. ***************** IMPORTANT WARRANTY INFORMATION **************** FILE: READ-ME.DOC Page 5 of 21 M E T R I C - X (tm) Version 2.02 ======================================================================== 4. SYSTEM REQUIREMENTS INFORMATION ------------------------------------------------------------------------ Computer Platforms Supported: IBM PC, XT, AT, PS/2 true compatible micro-computers DOS compatible networks Monitors/Displays: Monochrome (B & W) or Color CRT, LCD or Plasma Video/Graphics Adapter: MDA/HGC/LCD/CGA/EGA/VGA (or higher standard) Operating System: MS-DOS/IBM-DOS 2.1 (or higher) Memory Requirements: 128 kb 5. STARTING and RUNNING METRIC-X (from a Floppy Disk) ------------------------------------------------------------------------ METRIC-X is normally supplied on: double-sided/double-density 5-1/4 or 3-1/2 inch diskettes. The procedure for starting and running the METRIC-X software is the same for either media. Step 1. Place the METRIC-X Program Floppy Disk in DRIVE A: or other appropriate Drive designation, as your hardware dictates. Step 2A. If you have a COLOR Monitor, type: MX and then press the <Enter> key. Step 2B. If you have a MONOCHROME Monitor, type: MX /M and then press the <Enter> key. Step 2C. If you have a LIQUID-CRYSTAL DISPLAY (LCD), type: MX /M and then press the <Enter> key. NOTE: If you start METRIC-X in the wrong "color mode", don't worry. You may swap between color and monochrome modes, from within the program (while your running METRIC-X). Step 3. METRIC-X will load itself (into your computer's memory) and will first display the LOGO Screen. "Press Any Key", when instructed to do so (on the screen). Step 4. A SHAREWARE - PLEASE REGISTER screen will appear next. You may again "Press Any Key" when instructed to do so. This screen ONLY APPEARS on UNREGISTERED copies of METRIC-X. Step 5. Select any of the 12 Categories (or HELP), by pressing your <Space Bar> or the 1st Letter of the Category or <Enter> on a high-lighted selection. Pressing the <Esc> or <Q> will quit METRIC-X and exit out to your DOS prompt. FILE: READ-ME.DOC Page 6 of 21 M E T R I C - X (tm) Version 2.02 ======================================================================== 6. INSTALLING METRIC-X ONTO A HARD DISK (From a Floppy Disk) ------------------------------------------------------------------------ METRIC-X is normally supplied on a double-sided/double-density 5-1/4 or 3-1/2 inch diskette. The procedure for installing the METRIC-X software is the same for either size media. Step 1. Place the METRIC-X Program Floppy Disk in DRIVE A: or other appropriate Drive designation, as your hardware dictates. Step 2. METRIC-X may reside within any "sub-directory" on your hard disk. You may choose to put it in one of your existing sub directories (such as \UTILS or \TEMP, etc.) or you may wish to create a separate sub-directory, just for METRIC-X. If the later, type: MD C:\METRIC-X and the press <Enter>. Step 3A. If you wish to copy ONLY THE METRIC-X EXECUTABLE FILE, that is MX.EXE, type: COPY A:MX.EXE C:\ and then press your <Enter> key. where: "A:" (or other designation) is your floppy drive which holds the METRIC-X disk. "C:\" is the hard disk designation. If you wish to put METRIC-X into a specific sub-directory on your hard disk, you may type something like; "C:\METRIC-X" Step 3B. If you wish to copy ALL OF THE METRIC-X FILES, that is both the executable file (MX.EXE) and the documentation files, type: COPY A:*.* C:\ and then press your <Enter> key. where: "A:" (or other designation) is your floppy drive which holds the METRIC-X disk. "C:\" is the hard disk designation. If you wish to put METRIC-X into a specific sub-directory on your hard disk, you may type something like; "C:\METRIC-X" NOTE: There is a file (PACKING.LST), which lists all of the files contained on the METRIC-X disk, and gives a brief description of each file. You may directly print-out all of these files except two: 1. MX.EXE (the METRIC-X Executable File) 2. PL94-168.WP5 (a copy of Public Law- 94-168 in WordPerfect 5.1's format). Step 4. The METRIC-X Executable File (MX.EXE), should reside within a sub-directory which is listed in your AUTOEXEC.BAT's path statement (so that it may be run from any prompt). Please consult your computer's documentation or the Disk Operating System (DOS) documentation for instructions on altering the "path statement". FILE: READ-ME.DOC Page 7 of 21 M E T R I C - X (tm) Version 2.02 ======================================================================== 6. INSTALLING METRIC-X ONTO A HARD DISK (From an "ARCHIVED" File) ------------------------------------------------------------------------ METRIC-X may also be supplied in an "Archived" or compressed format. This may take the form of a MX-202.ZIP file (which requires an UNZIP program - from PK-Ware, to uncompress the file) or a self-extracting ZIP-file (MX-202.EXE), where the file will uncompress itself when it is first executed (run). The MX-202.ZIP form is normally found on a Electronic Bulletin Board System (BBS), while the MX-202.EXE form is usually supplied by a Shareware Disk Distributor/Vendor. UNPACKING the MX-202.ZIP FILE (BBS FORMAT) ------------------------------------------ Step 1. Place the MX-202.ZIP file in the desired sub-directory, (on your hard drive) - Example: C:\METRIC-X Step 2. Change to your sub-directory in which a copy of PKUNZIP.EXE resides. Type: PKUNZIP C:\METRIC-X\MX-202.ZIP and then press your <Enter> key. NOTE: If you wish to copy ONLY THE METRIC-X EXECUTABLE FILE, that is MX.EXE, type: PKUNZIP C:\METRIC-X\MX-202.ZIP MX.EXE and then press your <Enter> key. where: "C:\METRIC-X" (or other designation) is the Disk Drive & sub-directory which holds the MX-202.ZIP file. UNPACKING the MX-202.EXE FILE (DISK VENDOR FORMAT) -------------------------------------------------- Step 1. Place the MX-202.EXE file in the desired sub-directory, (on your hard drive) - Example: C:\METRIC-X Step 2. Change to that sub-directory (which has the MX-202.EXE file located in it. Step 3. Type: MX-202 and then press your <Enter> key. NOTE: All of the files will automatically be uncompressed (into a form which is the same as they were before being compressed by the PKZIP program). FILE: READ-ME.DOC Page 8 of 21 M E T R I C - X (tm) Version 2.02 ======================================================================== 7. STARTING AND RUNNING METRIC-X (from a Hard Disk) ------------------------------------------------------------------------ METRIC-X has been installed on your hard drive (or Computer NETWORK) by a previous procedure. The procedure for starting and running the METRIC-X software is the same regardless of the original source. Step 1. If you do not have the sub-directory which holds the METRIC -X software (the MX.EXE file) listed in your AUTOEXEC.BAT's "path statement", you must first change to the appropriate drive\directory by typing; CD \METRIC-X and then press the <Enter> key. Where "CD" is the DOS command; "Change Directory" and "\METRIC-X" equals the appropriate sub-directory. Step 2A. If you have a COLOR Monitor, type: MX and then press the <Enter> key. Step 2B. If you have a MONOCHROME Monitor, type: MX /M and then press the <Enter> key. Step 2C. If you have a LIQUID-CRYSTAL DISPLAY (LCD), type: MX /M and then press the <Enter> key. NOTE: If you start METRIC-X in the wrong "color mode", don't worry. You may swap between color and monochrome modes, from within the program (while your running METRIC-X). Step 3. METRIC-X will load itself (into your computer's memory) and will first display the LOGO Screen. "Press Any Key", when instructed to do so (on the screen). Step 4. A "SHAREWARE-PLEASE REGISTER" screen will appear next. You may again "Press Any Key" when instructed to do so. This screen ONLY APPEARS on UNREGISTERED copies of METRIC-X. ******* At this point, your are viewing the MAIN MENU level. ******* You may select any of the 12 Categories (or HELP), by pressing your <Space Bar> or the "1st Letter" of the Category or <Enter> on a high -lighted selection. Pressing the <Esc> key or <Q> while at this level, will quit METRIC-X and exit out to your DOS prompt. Once you have selected a Category, your "FROM" Units of Measure MENU will be displayed, from which you will make a selection. Once you have selected the "FROM" Unit of Measure, the "TO" Units of Measure MENU is displayed, from which you will make a 2nd selection. Note that the <Esc> key will allow you to back-up through each step. FILE: READ-ME.DOC Page 9 of 21 M E T R I C - X (tm) Version 2.02 ======================================================================== 8. ENTERING A NUMBER (for conversion) ------------------------------------------------------------------------ METRIC-X will accept a numeric input as a whole number, as a decimal number, as a fraction or in scientific notation. Examples of valid entries are: 7 17.254 3/16 1.7375E-5 4.33E11 Instructions for entering a number (and manipulating the answer) are always displayed on the screen for you (just above the numeric input area where you enter your number and receive the resulting answer of the conversion). NOTE: With the exception of the TEMPERATURE Category, you may not enter negative numbers. 9. ABBREVIATIONS (unit clarifiers) ------------------------------------------------------------------------ Several of the "Units of Measure" have a "unit clarifier" (shown after the UM in parenthesis), such as; Gallons (US), where (US) advises you that this refers to "U.S. Gallons", rather than Canadian or Imperial. The following list applies: ABBREV CATEGORY UNIT of MEASURE MEANINGS --------- ------------ --------------- ---------------------------- 3 VOLUME Multiple "to the 3rd power, Cubed" (@ pf=80) POWER KVA "at a Power Factor of 80" (Apth) MASS Drams "Apothecaries Weight" (Avdp) MASS Drams & Ounces "Avoirdupois Weight" (Dry) VOLUME-Dry Pints & Quarts "Dry Measure" (E) POWER Horsepower "Electric" (EEC) ENERGY Therm "European Economic Comm." (I) POWER Btu/s & Btu/h "International" (Intl) ENERGY Btu "International" (Liq) VOLUME-Liq Pints "Liquid" (Long) MASS Tons "Long Ton = 2240 lb" (Mean) ENERGY Btu "Mean" (Metric) MASS Tons "Metric Ton = 1000 kg" (Naut) LENGTH Miles "U.S. & Intl Nautical Miles" (Refrig) POWER Tons "Refrigeration" (Short) MASS Tons "Short ton = 2000 lb" (Stat) LENGTH Miles "U.S. Statute Mile = 5280 ft" (Tc) ENERGY/POWER Calorie & Cal "Thermochemical" (Troy) MASS Ounce "Troy Weight" (UK) VOLUME-Liq Quarts & Gallons "United Kingdom/Imperial" FILE: READ-ME.DOC Page 10 of 21 M E T R I C - X (tm) Version 2.02 ======================================================================== 10. NOTATIONAL FORM - SHORT-CUT KEY ------------------------------------------------------------------------ When the "conversion answer" is being displayed on the screen, the last instruction line on the menu will read either; "Press <E> to display answer in Exponential form" (if the answer is being displayed as a decimal number) or "Press <D> to display answer in Decimal form" (if the answer is being displayed in Exponential Form or in Scientific Notation). ************************** SHORT-CUT NOTE ************************** You may also "Press <N> to toggle between Notational forms" (Decimal to Exponent to Decimal to Exponent, etc.), as a short-cut/alternate to using the <D> and <E> keys. 11. U.S. SURVEY vs INTERNATIONAL UNITS ------------------------------------------------------------------------- When CONVERTING BETWEEN "INCH-POUND UNITS" and "INCH-POUND UNITS", this program uses U.S. Survey (statute) data, such that 12 inches = 1 foot, 3 feet = 1 yard and 5280 feet = 1 statute mile, etc. Again, when in "inch-pound units" to "inch-pound units" mode, the inch, foot, yard, etc., are all in U.S. Survey Statute units. When CONVERTING BETWEEN "METRIC UNITS" and "INCH-POUND UNITS", the inch, foot and yard are based upon their international values, such that: 1 inch = 0.0254 meters exactly, 1 foot = 0.3048 meters exactly and 1 yard = 0.9144 meters exactly. The fathom, rod, acre and mile however, are still based upon the U.S. Survey mile (statute mile), per the metric law of 1959. The "U.S. Survey mile" to "metric" (or metric to U.S. Survey mile) conversion factor is based upon the old standard (the Metric Law of 1866) and is: (1 ft = 1200/3937 m). Based upon this relationship, the following metric conversions/ equivalents result (and are used by METRIC-X); 1 U.S. Survey Fathom = 1.828803657607315 meters 1 U.S. Survey Rod = 5.029210058420117 meters 1 U.S. Survey Mile = 1609.347218694436 meters 1 U.S. Survey Acre = 4046.873000000013 meters^2 NOTE: 1 International Mile = 1609.344 meters exactly, but is not used by METRIC-X as America uses the "U.S. Survey Mile". While the law itself is cause for confusion, METRIC-X has tried to use the appropriate unit/standard/value for the working environment. If additional data is required, refer to ANSI/IEEE Std 268-1982. FILE: READ-ME.DOC Page 11 of 21 M E T R I C - X (tm) Version 2.02 ======================================================================== 12. SUPPORT POLICY ------------------------------------------------------------------------- Orion Development Corporation will provide free technical support for registered users for a period of one year. Support, user's feed-back or additional information may be obtained by contacting the author by our Toll-Free Number: (800) 992-8170 our Office Number: (703) 698-8126 our Fax Number: (703) 698-0857 CompuServe Mail message: (71140,2416) or by writing to: Orion Development Corp. P.O. Box 2323 Merrifield, VA 22116-2323 Registered users will be notified of new releases as they are made available and may be eligible for free or reduced-rate upgrades, dependent upon their original "date of registration". 13. DEFINITION OF SHAREWARE (from the ASP) ------------------------------------------------------------------------- Shareware distribution gives users a chance to try software before buying it. If you try a Shareware program and continue using it, you are expected to register. Individual programs differ on details, some request registration while others require it, some specify a maximum trial period. With registration, you get anything from the simple right to continue using the software to an updated program with printed manual. Copyright laws apply to both Shareware and commercial soft- ware and the copyright holder retains all rights, with a few specific exceptions as stated below. Shareware authors are accomplished programmers, just like commercial authors, and the programs are of comparable quality. (In both cases, there are good programs and bad ones!) The main difference is in the method of distribution. The author specifically grants the right to copy and distribute the soft- ware, either to all and sundry or to a specific group. For example, some authors require written permission before a commercial disk vendor may copy their Shareware. Shareware is a distribution method, not a type of software. You should find software that suits your needs and pocketbook, whether it's commercial or Shareware. The Shareware system makes fitting your needs easier, because you can try before you buy. And because the overhead is low, prices are low also. Shareware has the ultimate money-back guarantee -- if you don't use the product, you don't pay for it. FILE: READ-ME.DOC Page 12 of 21 M E T R I C - X (tm) Version 2.02 ======================================================================== 14. OMBUDSMAN STATEMENT (required by the ASP) ------------------------------------------------------------------------ This program is produced by a member of the Association of Shareware Professionals (ASP). ASP wants to make sure that the shareware principle works for you. If you are unable to resolve a shareware- related problem with an ASP member by contacting the member directly, ASP may be able to help. The ASP Ombudsman can help to resolve a dispute or problem with an ASP member, but does not provide technical support for members' products. Please write to the ASP Ombudsman at 545 Grover Road, Muskegon, MI 49442 or send a CompuServe message via CompuServe Mail to ASP Ombudsman 70007,3536. 15. ICMP-MOC DESIGNATION STATEMENT ------------------------------------------------------------------------ "This Conversion Tool has been reviewed by the Metric Operating Committee's Standards and Metric Practices Subcommittee for consistency with accepted metric practice only, and is designated an ACCEPTED METRIC CONVERSION TOOL. Use of this software in areas requiring conversion or translation of measures complies with the provisions of Executive Order 12770 and P.L. 100-418 requiring Federal agencies, with certain limitations and exceptions, to use the International System of Units (metric system) in procurements, grants and other business-related activities." (91-12-11) -------------------- Disclaimer of Warranty ------------------------ "The Metric Operating Committee disclaims all warranties, expressed or implied and assumes no liability for damages, direct or consequential, which may result from the use of this product." 16. DISTRIBUTION INFORMATION (General) ------------------------------------------------------------------------ This section provides information for Shareware Distributors, Disk Vendors, Computer Clubs and BBS System Operators (SYSOPS), who wish to distribute the METRIC-X(tm), Version 2.02 package. As the exclusive copyright holder for METRIC-X, Orion Development Corporation authorizes distribution ONLY in accordance with the following restrictions: The METRIC-X package is defined as containing all the material listed in the PACKING.LST text file. If any files listed in the PACKING.LST text file, or the PACKING.LST file itself, are missing, then the package is not complete and distribution is forbidden. This is to guard against unauthorized tampering and to protect the interests of both ORION Development Corporation and the End User. Please contact us to obtain a complete package suitable for distribution. All rights not expressly granted here are reserved to Orion Development Corporation. FILE: READ-ME.DOC Page 13 of 21 M E T R I C - X (tm) Version 2.02 ======================================================================== 16. DISTRIBUTION INFORMATION (General) - continued ------------------------------------------------------------------------- The METRIC-X package - including all related program documentation files - CANNOT be modified in any way and must be distributed as a complete package, without exception. The PACKING.LST text file contains a list of all files that are part of the METRIC-X package. Small additions to the package, such as the introductory or installation batch files used by many shareware disk vendors, are acceptable. The PRINTED User's guide may not be reproduced in whole or in part, using any means, without the written permission of Orion Development Corporation. In other words, any disk-based documentation may not be distributed in PRINTED (hardcopy) form. The METRIC-X package cannot be "rented" or "leased" to others. You may not list any of our products in advertisements, catalogs, or other literature which describes our products as "FREE SOFTWARE". Shareware is "Try-Before-You-Buy" software, it is not free. Orion Development Corporation prohibits the distribution of outdated versions of the METRIC-X package, without written permission from Orion Development Corporation. If the version you have is over twelve (12) months old, please contact us to ensure that you have the most current version. This version was released in April, 1992. We would appreciate copies of anything you print regarding METRIC-X. Please send us a copy of any reviews, articles, catalog descriptions, or other information you print or distribute regarding the METRIC-X package. Thank you for your time and assistance and for supporting the shareware marketing concept. Please refer to REGISTER.DOC for our mailing address and phone number. Category/Keywords: ------------------ BUSINESS, UTILITY, EDUCATION, METRIC, CONVERSION Short Description: ------------------ METRIC-X - A Metric-English-Metric conversion utility which uses drop-down menus to display/select any of 12 Categories & 179 Units of Measure and is a professional-grade product. It is user-friendly, very accurate, and has been DESIGNATED an "ACCEPTED METRIC CONVERSION TOOL" by the ICMP-MOC, the U.S. Government's metric authority. FILE: READ-ME.DOC Page 14 of 21 M E T R I C - X (tm) Version 2.02 ======================================================================== 16. DISTRIBUTION INFORMATION (General) - continued ------------------------------------------------------------------------- Long Description: ----------------- METRIC-X - A Metric-English-Metric conversion utility which uses drop-down menus to display/select any of 12 Categories & 179 Units of Measure and is a professional-grade product. The program's accuracy is due to its fast, double-precision algorithms which are based upon the ANSI/IEEE Std 268-1982, on "METRIC PRACTICES". The program was developed in a real working environment and has been engineered to be accurate, user-friendly (very easy to use) and efficient. METRIC-X has many unique features which make is easy to use and adds power to the conversion process. The user may now swap the "FROM & TO Modes" simply by pressing the Space Bar or can scroll the FROM Value UP or DOWN using only a single key (as the TO's Value tracks the new value automatically). For those who have trouble with forms of notation, METRIC-X will accept decimal numbers, exponential forms or fractions as an input and can switch forms between Decimal Numbers or Exponential (Scientific Notation) with a single key stroke. The conversion answers may be displayed with 0 to 6 decimal places or accuracy, with automatic rounding. Once you have your conversion results (your answer), you may simply enter another number or you might manipulate to displayed results or, with a single keystroke, you can Quit/Exit, jump to the Main Menu, or go to either the FROM or TO selection menus. METRIC-X was found to be so easy to use, esthetically clean and so accurate, that its use has been encouraged for all government agencies and has been DESIGNATED as an "ACCEPTED METRIC CONVERSION TOOL" by: the U.S. Interagency Council on Metric Policy-Metric Operating Committee. METRIC-X is the only such conversion program, to currently hold this honor. The author of the METRIC-X program is a member of ASP, the Association of Shareware Professionals. 17. VENDOR/DISTRIBUTOR LIMITED LICENSE - Distribution Requirements ------------------------------------------------------------------------- ASP Approved Vendors in good standing are hereby given permission to distribute METRIC-X package. All Non-ASP member vendors must request written permission prior to distributing this package. No price or other compensation may be charged for the METRIC-X package. A distribution fee may be charged for the cost of the diskette, shipping and handling, as long as the total (per disk) does not exceed US $ 8.00 in the U.S. and Canada, or US $ 12.00 internationally. FILE: READ-ME.DOC Page 15 of 21 M E T R I C - X (tm) Version 2.02 ======================================================================== 17. VENDOR/DISTRIBUTOR LIMITED LICENSE - Distribution Requirements ------------------------------------------------------------------------- continued Disk Sets & CD-ROMs: ~~~~~~~~~~~~~~~~~~~~ The METRIC-X package CANNOT be sold as part of some other inclusive package. Nor can it be included in any commercial software packaging offer, without a written agreement from Orion Development Corp. ASP Approved Vendors who wish to distribute the METRIC-X package as part of a collection (such as PsL's MegaDisk set, or a CD-ROM package) may do so provided that all the other restrictions are met. Vendors (non-ASP Vendor Members) who wish to distribute the METRIC-X package as part of a collection (such as PsL's MegaDisk set, or a CD-ROM package) must obtain written permission from Orion Development Corporation prior to beginning such a distribution. If you wish to add any of our programs to a CD-ROM or other collection, please check the release date of the version you have. If the version is over twelve (12) months old then please contact us to ensure that you have the most current version. This version was released in April, 1992. Disk-of-the-Month (or Subscription) Distribution: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ If you would like to distribute the METRIC-X package as a Disk-of- the-Month, or as part of a subscription or monthly service, then the following restrictions apply: ASP Associate (Disk Vendor) Members in good standing are hereby given permission to distribute the METRIC-X package under the Disk-of-the-Month style of distribution. Others (non-ASP Members) must contact us in advance to ensure that you have the most current version of the software. You cannot use a Disk-of-the-Month distribution to use up your inventory of old (out of date) disks. Only current versions may be shipped as Disk-of-the-Month disks. The Licensee shall not use, copy, rent, lease, sell, modify, decompile, disassemble, otherwise reverse engineer, or transfer the licensed program except as provided in this agreement. Any such unauthorized use shall result in immediate and automatic termination of this license. FILE: READ-ME.DOC Page 16 of 21 M E T R I C - X (tm) Version 2.02 ======================================================================== 18. BBS/SYSOP LIMITED LICENSE - Distribution Requirements ------------------------------------------------------------------------- This section contains information regarding the posting of the METRIC-X package, version 2.02, on Bulletin Board Systems. Limited Distribution License: ----------------------------- The METRIC-X package is defined as containing all the material listed in the PACKING.LST text file. If any files listed in the PACKING.LST text file, or the PACKING.LST file itself, are missing, then the package is not complete and distribution is forbidden. Please contact us to obtain a complete package suitable for distribution. The METRIC-X package - including all related documentation files and program files - CANNOT be modified in any way (other than that mentioned in the following paragraph) and must be distributed as a complete package, without exception. The PACKING.LST text file contains a list of all files that are part of the METRIC-X package. Many BBSs customarily add a small text file (advertisement) to each archived file. This text file describes the BBS and tells people that the file was downloaded from that particular BBS. Other BBSs add a small one-line message with their BBS name and phone number into the compressed file, which will display when the file is uncompressed. Either of these methods of mentioning your BBS are acceptable and may be used, provided the program and documentation is otherwise unmodified and complete. Orion Development Corp. prohibits the distribution of outdated versions of the METRIC-X package, without written permission from Orion Development Corp.. If the version you have obtained is over twelve (12) months old, please contact us to ensure that you have the most current version. Licensee shall not use, copy, rent, lease, sell, modify, decompile, disassemble, otherwise reverse engineer, or transfer the licensed program except as provided in this agreement. Any such unauthorized use shall result in immediate and automatic termination of this license. File Name(s) for BBSs: ---------------------- The program and documentation must be contained within a single archive file. For consistency and to help users locate the files, please use the following file names: MX-202.ZIP for (METRIC-X - Version 2.02) FILE: READ-ME.DOC Page 17 of 21 M E T R I C - X (tm) Version 2.02 ======================================================================== 18. BBS/SYSOP LIMITED LICENSE - Distribution Requirements - continued ------------------------------------------------------------------------- NOTE: Version 1.00 has been posted on some BBSs under the file name of METRIC-X.ZIP and/or METRIC-X.ARC. This original issuance is no longer current. It should be replaced by METRIC-X, Version 2.02, using MX-202.ZIP. Accordingly, METRIC-X, MX-110.ZIP, MX-120.ZIP, etc.... should also be replaced with MX-202.ZIP. If the program is compressed using some other file compression method, then please use the name "MX-202" with the appropriate extension (PAK, ARC, LZH, ZOO, etc.). Filename & 35/45 Character Description: --------------------------------------- MX-202.ZIP METRIC-X, Metric-English Conversion ----+----1----+----2----+----3----+ MX-202.ZIP METRIC-X, Metric-English-Metric Conversion ----+----1----+----2----+----3----+----4----+ 19. DISTRIBUTION by USER GROUPs & GOVERNMENT AGENCIES ------------------------------------------------------------------------- ****** Distribution Requirements for Computer Clubs & User Groups ****** Computer Clubs and User Groups wishing to add the METRIC-X package to their disk library may do so in accordance with the Distribution Restrictions listed above. If you would like your Computer Club or User Group to be placed on our mailing list for future upgrades to any of our products, please contact us for complete details. Our address, phone number, Fax number and CompuServe ID number are listed in the REGISTER.DOC file. ********* Distribution Requirements for the U.S. Government ********* U.S. Government Information: Use, duplication, or disclosure by the U.S. Government of the computer software and documentation in this package shall be subject to the restricted rights applicable to commercial computer software as set forth in subdivision (b)(3)(ii) of the Rights in Technical Data and Computer Software clause at 252.227-7013 (DFARS 52.227-7013). The Contractor/manufacturer is Orion Development Corporation, P.O. Box 2323, Merrifield, VA 22116-2323. FILE: READ-ME.DOC Page 18 of 21 M E T R I C - X (tm) Version 2.02 ======================================================================== 20. AUTHOR/PUBLISHER INFORMATION ------------------------------------------------------------------------- Orion Development Corporation is a small software company, founded in 1986 by its CEO, Richard A. Long, who is a member of the Association of Shareware Professionals. This (metric) product is further supported by the author's memberships in; the Institute of Electrical & Electronics Engineers (IEEE) plus, both the American National Metric Council (ANMC) and the U.S. Metric Association (USMA). At Orion Development, we believe that HIGH PRODUCT QUALITY and CUSTOMER SATISFACTION are the keys to good business. This concept is fundamental in our approach to product development, production and marketing. We saw a basic need for an easy to use, metric-conversion utility to help America's businesses and Government Agencies during the transition to the Metric System. METRIC-X meets that need head-on. Orion Development Corporation has been producing DOS-based software since 1988, and from that time, our product designs have evolved into the clean, user-friendly, highly accurate and reasonably priced software of 1992. METRIC-X(tm) is the first software program which Orion Development has marketed as Shareware. Please feel free to contact the author (Richard Long) at any time if you have any questions, comments or suggestions. Direct correspondence to the following mailing address: Richard A. Long - President Orion Development Corporation P. O. Box 2323 Merrifield, VA 22116-2323 U.S.A. We may also be reached by voice or electronically as follows: Telephone: (800) 992-8170 (lower 48 states only) (703) 698-8126 (AK, HI and INT'L) Fax: (703) 698-8126 CompuServe ID: 71140,2416 Internet: 71140.2416@COMPUSERVE.COM FILE: READ-ME.DOC Page 19 of 21 M E T R I C - X (tm) Version 2.02 ======================================================================== 21. PRODUCT DEVELOPMENT/UPGRADE HISTORY ------------------------------------------------------------------------- WHAT WAS NEW IN VERSION 1.10 ------------------------------------------------------------------------- * Orion Development Corporation has added "dual media" as a standard distribution method. Registered users will receive both 3-1/2 and 5-1/4 inch disks with their 24 page Illustrated User's Manual. * We are pleased to include the statement from the U. S. Interagency Council on Metric Policy's - Metric Operating Committee, which has designated the METRIC-X software as an "ACCEPTED METRIC CONVERSION TOOL" (see 6 below). * Statements required by ASP were incorporated, (see: 1 and 2 above). * Minor corrections have been made to: U. S. Survey-based conversion factors (rod, fathom, acre and statute mile). The Troy ounce was in error and the conversion factor was corrected. * We have added an automatic "Scratch-Pad Memory" (which holds the last FROM and TO Values), if either of these Units is used during the next conversion. * If you had entered an number which resulted in an answer which was "too large to be displayed as a decimal", METRIC-X would set the display mode to Exponential Notation (and leave you in that mode). METRIC-X now automatically switches you back to; Decimal Notation, if that is the mode you were previously working in (and if the new answer is not too large to be displayed as a decimal). * Our low introductory price of $15 per copy has failed to cover our production and support costs, forcing us to make an adjustment in the price schedules for METRIC-X (see the REGISTER.DOC file). WHAT WAS NEW IN VERSION 1.20: ------------------------------------------------------------------------- * The "watthour" and "kilowatthour" (on the POWER Menu) were replaced by "KVA (@ pf=75)" and "KVA (@ pf=85)". * The ASCII Text Files, which accompany METRIC-X, were streamlined to make the user access easier and their content clearer. * The "NATIONAL NETWORK" and "GLOBAL NETWORK" Licenses were added to the standard purchase scenarios available. FILE: READ-ME.DOC Page 20 of 21 M E T R I C - X (tm) Version 2.02 ======================================================================== 21. PRODUCT DEVELOPMENT/UPGRADE HISTORY - continued ------------------------------------------------------------------------- WHAT WAS NEW IN VERSION 2.00: ------------------------------------------------------------------------- * The Categories FORCE, PRESSURE and ACCELERATION were ADDED, bringing the total "units of measure" count to 179. * The old Category Name of: "WEIGHT" was changed to "MASS". "SPEED" was changed to "VELOCITY". "FREQ" was changed to "WAVELENGTH". * The old Category Name of: "POWER", which was a sub-category of "ENERGY", is now a separate category. * The Unit of Measure Name: "sq Nanometer" was changed to "Nanometer²" "sq Micrometer" was changed to "Micrometer²" "sq Millimeter" was changed to "Millimeter²" "sq Centimeter" was changed to "Centimeter²" "sq Decimeter" was changed to "Decimeter²" "sq Meter" was changed to "Meter²" "sq Kilometer" was changed to "Kilometer²" "cu Nanometer" was changed to "Nanometer3" "cu Micrometer" was changed to "Micrometer3" "cu Millimeter" was changed to "Millimeter3" "cu Centimeter" was changed to "Centimeter3" "cu Meter" was changed to "Meter3" "cu Hectometer" was changed to "Hectometer3" "cu Kilometer" was changed to "Kilometer3" * The old Unit of Measure: "Miles/sec" (SPEED), was replaced by "Mach (0°C @ SL)" (VELOCITY). WHAT WAS NEW IN VERSION 2.01 ------------------------------------------------------------------------- * The conversion value for Std Atmosphere (Pressure) was in error by a factor of 1.0E05. * The pricing schedules were adjusted to be more equitable. * We added VISA and MASTERCARD service (processed through one of our distributors). * We added a 24 hour FAX line (703) 698-0857 to assist with placing orders and providing technical support. WHAT'S NEW IN VERSION 2.02 ------------------------------------------------------------------------- * The support files associated with the METRIC-X product were rewritten and consolidated to reduce their size and confusion factor. * The Points of Contact File (POC-LIST.DOC) was updated. FILE: READ-ME.DOC Page 21 of 21 METRIC-X (tm) USER FEEDBACK SURVEY FORM Version 2.02 ======================================================================== The intention of this survey is to help Orion Development Corporation design the very best products, ones which help you do your job better and faster, with everything that you need in one, convenient package. Please complete this survey and return it to: Orion Development Corp. P.O. Box 2323, Merrifield, VA 22116 or FAX it to: (703) 698-0857. ======================================================================== Name: ____________________________________________________________________ Title: _____________________________________________________________________ Organization: _____________________________________________________________________ Address: _____________________________________________________________________ _____________________________________________________________________ City: State: Zip: _____________________________________________________________________ Telephone: ( ) - Work ( ) or Home ( ) _____________________________________________________________________ Fax No.: ( ) - _____________________________________________________________________ 1. Do you like the METRIC-X program ? Yes ( ) No ( ) Why ? _____________________________________________________________________ _____________________________________________________________________ 2. Does it do the job that you need ? Yes ( ) No ( ) If not, what's lacking ? _____________________________________________________________________ _____________________________________________________________________ 3. What would you like to see added ? _____________________________________________________________________ _____________________________________________________________________ 4. What would you like to see deleted ? _____________________________________________________________________ 5. What other programs ideas do you have. What do you need, want or would like to see? _____________________________________________________________________ _____________________________________________________________________ 6. How many PCs at above address ? _____ Network ? Yes( ) No( )