home *** CD-ROM | disk | FTP | other *** search
- PPoint
- Professional Point System
- Copyright (c) 1994 Harvey Parisien
- Kingston, Ontario, CANADA K7M 6R2
- FidoNet 1:249/114
-
- Setup Questions
-
- 1) Is this a POINT setup or QWK setup. Choose POINT unless you
- are connecting to a QWK specific host or network. If you do
- not know, choose POINT.
-
- 2) Do you want a FAST setup?... Answer YES to this. A more
- detailed setup is not necessary, and can always be modified
- later using the SETUP menu on your pulldown menus.
-
- 3) Your First and Last name? This will be your name as
- presented in all your outgoing mail, and the name you expect to
- receive mail to.
-
- 4) Your point address (Zone:Network/Node{.Point}) ie: 1:20/30.1
-
- Enter this address: _________________________
-
- 5) Your BOSS ROUTE address (Zone:Network/Node). Press ENTER to
- accept the suggested address, or enter a route address if this
- was requested by your host.
-
- 6) Your Origin line? This is your own personal system title
- line which shows in each message. Press ENTER to accept the
- default, or be creative and enter something else.
-
- 7) Your Serial Com Port? This is the communications port your
- modem is connected to.
-
- 8) Your Modems Baud Rate? This should be the fastest speed
- which your modem can support (only enter valid speeds suggested
- at the prompt in this section).
-
- 9) Your Phone line type Tone or Pulse? Default is T.
-
- 10) Your Host phone number? This should be exactly the way you
- would have to dial it if it were a manual call.
-
- Enter this number: __________________________
-
- 11) Your Host session password: __________________
-
-
- Further setup parameters can be modified from your pulldown
- menus under the section called SETUP. You might want to change
- your text editor, or identify the type of printer you are
- connected to.
-
- NOTE: Information on blank lines is provided by your HOST.