Beijing Paradise BBS Backup

home *** CD-ROM | disk | FTP | other *** search

/ Beijing Paradise BBS Backup / PARADISE.ISO / software / BBSDOORW / PBU_113.ZIP / PBBSUUCP.DOC < prev next >

Wrap

Text File | 1995-02-04 | 19.2 KB | 398 lines

┌─────╖ ┌──────╖ ┌───╖ ┌─╖ ┌──────╖ ┌──────╖(TM) │ ╓─┐ ║ │ ╓──┐ ║ │ ╙╖ │ ║ └┐ ╓─┐ ║ │ ╓──┐ ║ │ ╙─┘ ║ │ ╙──┘ ║ │ ╟┐ ╙╖│ ║ │ ║ │ ║ │ ╙──┘ ║ │ ╓───╜ │ ╓──┐ ║ │ ║└┐ ╙┤ ║ │ ║ │ ║ │ ╓──┐ ║ │ ║ │ ║ │ ║ │ ║ └┐ ║ ┌┘ ╙─┘ ║ │ ║ │ ║ └─╜ └─╜ └─╜ └─╜ └───╜ └──────╜ └─╜ └─╜ ╥────┐ ╥───┐ ╥───┐ ╓────┐ Easy Internet ║ │ ║ │ ║ │ ║ Electronic Mail Handler ╟────┘ ╟───┴┐ ╟───┴┐ ╙────┐ ╥ ┬ ╥ ┬ ╓──┐ ╥──┐TM ║ ║ │ ║ │ │ ║ │ ║ │ ║ ╟──┘ ╨ ╨────┘ ╨────┘ ╙────┘ ╙──┘ ╙──┘ ╙──┘ ╨V1.13 PBBSuucp.exe Compiled with BC++ V3.1 & MsgApi by Scott J. Dudley PUExport.exe Compiled with TP 6.0 and Mark May's MSG ToolKit Other Utils compiled with Turbo C 2.00 Feb 4, 1995 (C) 1994, 95 by Bing Wu & International Meridian Co. ┌──────────────────────────────────────────────────────────────────┐ │▓▓ Table Of Contents ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ Page II ▓▓│ └──────────────────────────────────────────────────────────────────┘ Chapter 1 - Introduction............................................ Features......................................................01 OverView & System Requirements................................01 Credits.......................................................02 Files In Distribution Pack....................................02 Licensing Information.........................................03 Installation..................................................04 Chapter 2 - Configuration...─[ PUSETUP.EXE ]─....................... THE FILE MENU................................................... Info......................................................05 Credits...................................................05 Exit......................................................05 THE SYSTEM MENU............................................... Paths.....................................................05 Site Info.................................................06 Examples........................................................ Command Line Paramters....................................07 Batch Examples............................................07 ErrorLevels...............................................07 Chapter 3 - Additional Information.................................. Contact Author............................................08 ┌──────────────────────────────────────────────────────────────────┐ │▓▓ Features ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ Page 1 ▓▓ │ └──────────────────────────────────────────────────────────────────┘ - Auto Scan the Fido(*.MSG) base for out going mails matches the the Internet style address - UUCP Site address override - Convert the message(s) to correct UUCP message format - Replaces "UUCP" in the FROM field to the Internet address where the message was sent from - Supports the 36 characters limit of both TO and FROM fields - 4D Net address format supported - Most functions handled internally - Full screen Setup ┌──────────────────────────────────────────────────────────────────┐ │▓▓ OverView & System Requirements ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓│ └──────────────────────────────────────────────────────────────────┘ This program is designed to help those sysops offering UUCP access to their users, such as Internet E-MAIL. To write a message to an Internet address is a pain, that's where this program comes to play, *ease the pain*! What this program does is allow your users to enter an Internet message just like a FidoNet message, with the person's address at where it suppose to be, rather a line at beginning of the body of the message, where most users are likely to make mistakes. And this way reply to an Internet message is easier than ever, no need to strip the Internet address, change the destination name etc. All they need to do when reply is hit the reply key, type in reply, and let PBBSuucp handle the address stripping etc... Once your user entered such a message, and logged off your BBS, you call up the mail tosser/scanner to scan your message for any output messages, and moves the entered netmail to the Fidonet Netmail directory for delivery. After run the scanner, you call up *THIS PROGRAM*, it will scan through your netmail directory and find those messages with Internet style address (with "@") at the destination field, once a message is found, it redirects the message to "UUCP" and add a new line at the beginning of the body of the message like "TO: NAME@SOMEWHERE". Now, the message is all set for transfer through UUCP gateway without any error. *IT IS THAT EASY* Example: FR: Bing Wu TO: someone@somewhere, Panda BBS! (1:282/1016) RE: Testing -------- [Message Body] | Converts to | V FR: Bing Wu TO; UUCP, Panda BBS! UUCP Gate (1:282/1016) *OR* <<Default TO: UUCP, HostMaster (1:1/31) <<Override RE: Testing ----- TO: someone@somewhere [Message Body] This program is also able to replace the word "UUCP" from the FROM field of the incoming mail to the Internet address specified in the message body. If none found, UUCP will be still used. This program should be able to run on any computer with any kind of setup. The Author, however, CANNOT gurantee it will work on your computer or/and your system setup. ┌──────────────────────────────────────────────────────────────────┐ │▓▓ Credits ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ Page 2 ▓▓│ └──────────────────────────────────────────────────────────────────┘ * All Mentioned products in this manual are copyrighted/registered by its respective owner(s). * PBBSuucp.EXE incorporated MsgApi by Scott J. Dudley * PUExport.EXE incorporated MKMSG API by Mark May. ┌──────────────────────────────────────────────────────────────────┐ │▓▓ Files In The Package ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓│ └──────────────────────────────────────────────────────────────────┘ PBBSuucp.EXE The main executing program PUSETUP .EXE The full screen setup program PUEXPORT.EXE The Fido(*.MSG) exporter for PBBSuucp ONLY PBBSuucp.DOC The documentation file REGISTRA.REG The Registration for and info for Panda Soft TABSREG .INF How-to Use TABS's 900 service to register program WHATS .NEW Info on the new addition to this program ─────[ Auto Created ]───── PBBSuucp.CFG configuration file required by PBBSuucp ┌──────────────────────────────────────────────────────────────────┐ │▓▓▓ Licensing Information ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ Page 3 ▓▓│ └──────────────────────────────────────────────────────────────────┘ PBBSuucp refers to all executables and text files contained in the PBBSuucp archives released by Bing Wu (author) of Panda BBS! 1. PBBSuucp is the copyrighted material of Bing Wu. It may only be used in accordance with the Licensing Conditions. 2. The Products are provided AS IS. Neither the author nor any BBS operator distributing this software is responsible for any damage incurred during the operation of the program. 3. The Author (Bing Wu) can discountinue support and development of PBBSuucp without notice and at anytime after the initial license agree period (ONE YEAR and TWO MONTHS after the FIRST release of this program). 4. You may not modify or otherwise reverse─engineer PBBSuucp. 5. You may not use PBBSuucp in any unlawful and/or illegal manner. 6. A Registered Version of PBBSuucp MAY/MUST not be distributed with or without Author's Permission. 7. This program must be registered after 21 days of trail period. read REGISTRA.REG for more information! (commercial users MUST register before using it!) ┌──────────────────────────────────────────────────────────────────┐ │▓▓ Installation ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ Page 04 ▓▓│ └──────────────────────────────────────────────────────────────────┘ The Setup program for this program is easy to use and understand. It's a full screen program, so no EXTERNAL text editor is required. This version of PBBSuucp takes advantage of the environment variable, it will function much smoother with the SET environment but it's not required. It is simply used to make PBBSuucp and its utilitis to be able to locate the correct data files. In case neither the SET environment is set nor a directory is specified with command line parameter, current directory where the program is loaded will be used. Make sure that you also have the directory where the programs are located included in the PATH parameter. So the all programs can be located. To use the PBBSuucp evironment variable, simply add following line to your autoexec.bat or the batch file you call the RA or the PBBSuucp SET PBBSU=[Directory] Run this program after every toss/scan of mails by your mailer or run it once a day in the daily maintenance. All in All, it's upto you to decide! ┌──────────────────────────────────────────────────────────────────┐ │▓▓ ■■ CONFIGURATION - PUSetup.EXE ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ Page 5 ▓▓│ └──────────────────────────────────────────────────────────────────┘ PUSETUP is the full screen setup utility for PBBSuucp. Since you have already have a BBS or something like that running, I assume you have basic knowledge on how the full screen, selectable menu works. Therefore no explanation how to use it will be given in this manual. ONLY description of each choice is listed below. -= The File Menu =- There is nothing needs to be modified in this menu. Here is some information regarding about PBBSuucp. Info ──────────────────────────────────────────────────────────────── Here is little information about PBBSuucp Credits ──────────────────────────────────────────────────────────────── The Credits given by the author Exit ──────────────────────────────────────────────────────────────── Choose this option when you wish to exit the setup program. press [ESC] will also allow you to exit the program. -=THE SYSTEM MENU =- ┌──────────────────────────────────────────────────────────────────┐ │▓▓ Paths Define ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓│ └──────────────────────────────────────────────────────────────────┘ The paths shown on your screen are those which you have specified during the system configuration. Those paths specify where all PBBSuucp and its related files are located. PUSetup will not check for existence of a path, so make sure you have entered a valid path. Inbound Directory ─────────────────────────────────────────────────────────────────── This Path defines where the incoming files are stored by your mailer. OutBound Directory ─────────────────────────────────────────────────────────────────── This path defines where the outgoing mail packets are stored by your tosser. Log File ─────────────────────────────────────────────────────────────────── This field specifies the full path and name of the PBBSuucp log file. The full path is optional. If no path was specified, PBBSuucp directory will be used. ┌──────────────────────────────────────────────────────────────────┐ │▓▓ Site Information ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ Page 6 ▓▓│ └──────────────────────────────────────────────────────────────────┘ This is where you define various information about your system such as system name, sysop's name, and system's phone number. System Name ─────────────────────────────────────────────────────────────────── What is the name of your system (BBS). Used by PBBSuucp to determine the registration info of the program. System Operator's Name ─────────────────────────────────────────────────────────────────── What is the name of the Sysop. The Name must match the one specified in the key file inorder to have the program function as a registered program. System Address ─────────────────────────────────────────────────────────────────── Your FidoNet Style (4D supported, ZONE:NET/NODE.POINT) address which you used to send mails to your UUCP (Fido(msg)<->InterNet) gatewat. UUCP Address ─────────────────────────────────────────────────────────────────── The FidoNet Style (4D supported, ZONE:NET/NODE.POINT) address which is the UUCP gateway (where the send Internet mails to be gated). FROM Field ─────────────────────────────────────────────────────────────────── This is where you indicate how should PBBSuucp handle the FROM field of the netmail(s) to be created. You can either have the PBBSuucp use the FROM field from the original message or from the information contained in the setup. Max Message Bytes (default 16000bytes) ─────────────────────────────────────────────────────────────────── The Max Bytes limit for a message (round to thousand) Max Message Lines (default 10000) ─────────────────────────────────────────────────────────────────── The Max number of lines a message can handle Max File size (default 15360 bytes) ─────────────────────────────────────────────────────────────────── The Max file size of each segment of the encoded file which was split up. ┌──────────────────────────────────────────────────────────────────┐ │▓▓ Command Line Paramters ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ Page 07 ▓▓│ └──────────────────────────────────────────────────────────────────┘ INB [Option] Process Incoming Netmails OUT [Option/s] scan for outbound E-Mails [Option] -= OUT mode Only =- /LOWER or -LOWER Output the "TO" string in lower case letters -= OUT and INB mode =- /DEBUG Run the program in debug mode - log most of the program's run time info to file ┌──────────────────────────────────────────────────────────────────┐ │▓▓ Batch File Examples ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓│ └──────────────────────────────────────────────────────────────────┘ ;--- Tossing --- SET PBBSU=[PathName] :OUTBOUND FASTECHO SCAN PBBSuucp OUT goto exit :INBOUND FASTECHO TOSS PBBSuucp INB goto exit ┌──────────────────────────────────────────────────────────────────┐ d: │▓▓ ErrorLevels ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓│ └──────────────────────────────────────────────────────────────────┘ PBBSuucp will exit with one of the following errorlevels: 0 ─ No Error 1 ─ Mail found and converted 4 ─ No Configuration file found ┌──────────────────────────────────────────────────────────────────┐ │▓▓ Contact Author ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ Page 08 ▓▓│ └──────────────────────────────────────────────────────────────────┘ Snail Mail: International Merdian Co. 604 Ontario Street SE Minneapolis, MN 55414─3118 Voice: (612) 378-0885 BBS: Panda BBS! @ (612)378─7783 @ 28,800 V34 NetMail: wuxx0037@gold.tc.umn.edu of InterNet bing wu@1:282/1027.1 of FidoNet ┌──────────────────────────────────────────────────────────────────┐ │▓▓ Other Programs ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓│ └──────────────────────────────────────────────────────────────────┘ Online Programs ──────────────── BBSTROOP ──Ver 1.30── Online Scouting Troop Listing ($10 reg.) BBSMBCON ──Ver 1.20── Online Scouting MB Counselor list ($10 reg.) PBBSVOTE ──Ver 2.10── Online BBS Voting Door ($10 reg.) PBBSLIST ──Ver 2.00── Online BBS Listing Door ($15 reg.) Utilities ───────── *THIS* PBBSUUCP ──Ver 1.13── Easy UUCP (Internet) E-Mail Handler ($09 reg.) VIAINTER ──Ver 1.00── Fido mail pack<->Internet Router ($15 reg.) PBBSFreq ─Ver 1.00ß1─ FTSC file requester for Internet requests ($15) CFDATE ──Ver 1.00── Comp two files' date, find which one is newer CDATE ──Ver 1.00── Change the date/time of file(s) (FREEWARE) RA2FDUSR ──Ver 1.00── RA to FD Human caller counter updater (FREEWARE) ┌──────────────────────────────────────────────────────────────────┐ │▓▓ Beta Tester Needed ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓│ └──────────────────────────────────────────────────────────────────┘ International Meridian Company is currently seeking beta testers to test its programs, including all Door programs listed above and all upcoming programs. If you are intereted in becoming a beta tester, fill out the application BETATEST.APP. (Pre-registration of the program MAY be required)