home *** CD-ROM | disk | FTP | other *** search
-
- ▀█▀▀▄ █ █▀▀▀▀▀█ ▄▀ ▄▀▀▀▀▀▄
- █ █ █ ▄▀ ▄▀ ▀ ▄▀
- █ █ █ ▄▀ ▄▀ ▄▀
- █ █ █ ▄▀ ▄ ▄▀ ▄▀ ▄
- ▄▀▄▄▄▀ ▀▄ ▀▀▀▀▀▀▀ ▀▀▀▀▀▀▀
-
-
- DIZ/2
- (C)opyright 1993, written by Shawn Reimerdes
- FILE_ID.DIZ eXtractor for Prodoor
- Anti-Christ Software Designs Inc.
- $5 Shareware
-
- ┌────────────────────────────────┐
- │░ Introduction ░░░░░░░░░░░░░░░░░│
- └────────────────────────────────┘
-
- DIZ/2 is a command line utility for ProDoor sysops only. It scans an
- uploaded archive for a file named "FILE_ID.DIZ" and if found, uses the text
- to replace any description typed by the user and also adds: # of files,
- oldest and newest file dates, uncompressed size. It also handles local
- uploads and will post a file with a DIZ that was intended to be private as
- a private file witha DIZ.
- I recommend that you use the most current versions of your achiving
- utilities. If you want an achive type added in the current support, leave
- me a message and I'll add it for ya.
- DIZ/2 will even add the DIZ when the user didn't enter it as one of the
- uploads. That takes care of the utilties like ADDBIDIR, in other words it
- processes bi-directional protocols perfectly.
- DIZ/2 will remove BBSAds as well. Since its already looking to see if
- a DIZ is there why not check for BBSAds as well? I highly suggest using
- this feature, its surprisingly fast. If any of the ads you listed we're
- found it runs pkzip to delete them.
-
- ■ Archivers
- Supported: ZIP, ARJ, LZH, PAK.
- Tested with: Pkzip v2.04x, Arj v2.x, Lharc v2.x, Pak v2.51.
-
- ┌────────────────────────────────┐
- │░ Samples ░░░░░░░░░░░░░░░░░░░░░░│
- └────────────────────────────────┘
-
- description:
-
- | DIZ/2 v1.50 of 4.3.93 - ProDoor utility to
- | extract FILE_ID.DIZ in ZIP/ARJ/LZH/PAK files,
- | adds the # of files, newest/oldest file dates
- | and the uncompressed size. Local Uploading.
- | Removes unwanted BBSAds, archive comment
- | generator. The fastest and most powerful
- | processor out! Shareware by Shawn Reimerdes.
- | Files: 10 New: 04.03.93 Old: 03.20.93 φ DIZ
- | Uncompressed Size: 34,820 bytes
-
-
- caller log:
-
- **************************************************************
- 02-25-93 (23:15) (2) JOHN SMITH (16800E) (G) NEW YORK, NY
- Connect type: CONNECT 16800/ARQ/HST/HST/V42BIS
- Opened DOOR (PRODOOR) at 20:23
- Directory Scan for (930221) ... (Ctrl-K) aborts
- DIZ/2 v1.05 of 2.25.92 by Shawn Reimerdes
- ■ Processing file: filename1.zip
- - Files: 7 New: 02.26.93 Old: 01.21.93
- - FILE_ID.DIZ found.
- √ BBSAd: (CALL.ME) removed.
- 1 files, 1,437k bytes, 29.8 minutes, 1709.5 cps, 118
- (U) FILENAME1.ZIP Completed using G T/E=0 CPS=1,707
- Upload Time Credit: 10 minutes
- Pascal Conference Joined.
- Minutes Used: 38
- 02-25-93 (23:52) (2) JOHN SMITH Off Normally
- **************************************************************
-
-
- exiting errorlevels:
-
- 29 = DIZ Found.
- 1 = Error.
- 0 = Sucessful, No DIZ found.
-
-
- ┌────────────────────────────────┐
- │░ How to use properly ░░░░░░░░░░│
- └────────────────────────────────┘
-
- Sample line from PROUT1.BAT:
-
- diz-2 diz-2.cnf %2 %PCBDRIVE%%PCBDIR%\$door.nam %PCBNODE%
- ^ ^ ^
- | | |
- filename path/name $door.nam node#
-
- Dos command line for LOCAL uploading. If file doesn't contain FILE_ID.DIZ,
- then you will be asked to enter a description.
- If DIZ/2 finds a 5th parameter it assumes a local upload:
-
- diz-2 diz-2.cnf filename.zip $door.nam 1 c:\pcb\gen\uplddir.
- ^ ^ ^ ^
- | | | |
- filename place holders directory to post file
-
-
- Note: (Check batch files included with this package)
-
- ┌────────────────────────────────┐
- │░ Archive Comment ░░░░░░░░░░░░░░│
- └────────────────────────────────┘
-
- If you have a registered version of DIZ/2 you will be able to create a
- file that will contain variables to be translated, so that you can use
- it as the comment for your archived file.
- Simply create a textfile (path/name in config) any variables from the
- list below will be translated and a new textfile will be created with
- values in place of the %'s. After the program is done you can execute
- a program to add a the newly created comment into the archive.
-
- variables:
-
- %a - archive type
- %d - system date
- %n - newest filedate
- %o - oldest filedate
- %s - size of file
- %t - system time
- %v - DIZ/2 version
- %# - number of files
- %1 - filename
- %2 - FILE_ID.DIZ description (if found)
- %3 - node number
-
- example:
-
- ░▒▓ Filename: %1 - %a
- ░▒▓ Uploaded on %d at %t to A Clockwork Orange BBS
- ░▒▓ Files: %# Newest: %n Oldest: %o Size: %s
- ░▒▓ %2
- ░▒▓ ■ Via DIZ/2 %v
-
-
- ┌────────────────────────────────┐
- │░ External Diz Plus ░░░░░░░░░░░░│
- └────────────────────────────────┘
-
- If you want to change the look of the: | Files: New: Old: φ DIZ
- | Uncompressed Size: bytes
-
- Make a file as defined in the config anyway you like and use the
- macros listed below to fill in the correct information. If you do
- use it you should turn off the standard two lines it normally adds.
-
- %a - archive type
- %u - uncompressed size
- %i - if diz found "φ DIZ"
- %d - system date
- %t - system time
- %# - number of files
- %n - newest file date
- %o - oldest file date
- %v - diz/2 version number
- %3 - node number
-
- %^ - beginning of line
- %~ - end of line
-
-
- example:
-
- %^│Files: %# Newest: %n Oldest: %o%i%~
- %^│Uncompressed Size: %u Node %3%~
-
- ┌────────────────────────────────┐
- │░ DIZ-2.CNF ░░░░░░░░░░░░░░░░░░░░│
- └────────────────────────────────┘
-
-
- Example:
-
- Shawn Reimerdes
- 000000
- C:\ZDIR
- YES
- YES
- YES
- C:\PCB\MAIN\CALLER
- YES
- C:\DIZ-2\ADS.LST
- NONE
- C:\DIZ-2\DIZEXTN.ALL
-
- -----------
- Line 1 - SysOp's Name. Used to append to descriptions you upload locally.
- Line 2 - Registration #.
- Line 3 - Temp Directory (no trailing backslash!). For better performance
- I highly recommend use of a RAM drive.
- Line 4 - add "Files: X Old: XX.XX.XX New: XX.XX.XX" line? (YES/NO)
- Line 5 - add "Uncompressed Size: X bytes" line? (YES/NO)
- Line 6 - PCBoard Logging Enabled? (YES/NO)
- Line 7 - Path/Name of Log. The NODE# parameter will be added to the end
- of the name, for example if you entered "CALLER" the file used
- would be "CALLER1".
- Line 8 - Delete BBSAds from achive?
- Line 9 - Path/Name of BBSAds List that need removal.
- The list should be a list of filenames. One filename per line.
-
- <DIZ2-ADS.LST> FUCKBBS.AD
- -------*.*
- CALLME.*
- THEBBS.TXT
-
- DIZ-2 will check these filenames with the ZIP achive its checking
- and if found will run PKZIP to delete them. Very Fast.
-
- *Line 10 - Path/Name of archive comment to be translated. NONE=off. The newly
- created file will be the same name but the extension will be the
- current node #. (ex: DIZ2-COM.TXT => DIZ2-COM.1)
- Line 11 - Path/Name of external diz plus. NONE=off
-
- *=Registered feature
-
- ┌────────────────────────────────┐
- │░ Author's Notes ░░░░░░░░░░░░░░░│
- └────────────────────────────────┘
-
- I'll be releasing any new versions when time allows, if there are requests
- those features will be added as soon as possible.
-
- I'm now asking for a small registration fee of $5, with it you will be
- able to use the advanced registered features.
-
- If the there is an interest in this product please leave me mail on
- The Tool Shop BBS or Byte Busters BBS. I'd enjoy hearing what you, the
- SysOp, has to think.
-
- Please support Byron Forbes in his new quest for revitalizing ProDoor BBS.
- Call his board and register it today and dump that CDC!
-
-
- Thanks for your support and pass the word on,
- -- Shawn Reimerdes.
-