home *** CD-ROM | disk | FTP | other *** search
- :~Y:Yes
- :~YES: YES
- :~N:No
- :~NO: NO
- :~Dir?: Please Enter The Subdirectory Name:
- :~Int?: Enter Number:
- :~Str?: Enter Text:
- :~Esc:Press the [Esc] key ...
- :~Any:Press any key to continue ...
- :~AnyOS:Press any key to return to the operating system ...
- :~EscAny:Press [Esc] to quit, any other key to continue ...
- :~Out=In:The output drive cannot be the same as the input drive
- :~Dr:Drive %c:
- :~Rights1:You do not appear to have the minimum access rights to
- :~Rights2:drive %c: which are required for installation.
- :~HD:Hard Disk
- :~FD:Floppy Disk
- :~DiskType1: Please select the disk type of output disk %c:
- :~DiskType2: If you are installing onto a hard disk, RAM disk, or other NON-REMOVABLE
-
- :~DiskType3: disk, please select "Hard Disk". If you are installing onto a 5¼"
-
- :~DiskType4: floppy diskette, 3½" microfloppy diskette, or other REMOVABLE disk,
-
- :~DiskType5: please select "Floppy Disk".
- :~Mkg:Making: %s
- :~Rdg:Reading: %s
- :~Wrg:Writing: %s
- :~Apg:Appending: %s
- :~Skpg:Skipping: %s
- :~Verg:Verifying: %s
- :~Decg:Decompressing: %s
- :~Abrg:Aborting installation
- :~RdgLib:Reading: Library File --> %s
- :~RdgFree:Reading free space from drive %c:
- :~RdgTotal:Reading total space from drive %c:
- :~Insg:Installing files; please wait . . .
- :~InsgP:
- Installing %s; please wait . . .
-
- :~DOSErr:INTERNAL MS-DOS ERROR DETECTED
- :~!Size:Unable to determine the size of drive %c:
- :~AssSize?1:Would you like INSTALL to assume that there is
- :~AssSize?2:adequate free disk space on drive %c: and
- :~AssSize?3:attempt to install files even though the disk
- :~AssSize?4:size could not be determined (Y/N)?
- :~!Mem:Not enough memory
- :~Term?:Do you wish to terminate installation (Y/N)?
- :~Done:Installation complete.
- :~.DAT?1:INSTALL.EXE could not find the software you are installing.
-
- :~.DAT?2:Please select the INPUT disk drive:
- :~.DAT?3: The INPUT disk drive is the disk drive (usually a floppy disk drive)
-
- :~.DAT?4: containing the first disk of the software you are now installing.
-
- :~Acc:Unable to access disk drive %c:
- :~Acc1:Unable to access disk drive.
- :~Acc2:If you have removed or replaced the disk in this drive
- :~Acc3:since this operation was started, then please replace it.
- :~Acc4:Also, please make sure the disk drive door is shut.
- :~Full1:The disk in output drive %c: does not have enough space.
- :~Full2:The minimum required free space is %lu bytes.
- :~Full3:Drive %c: has only %lu bytes currently free,
- :~Full4:plus %lu bytes of files that will be overwritten.
- :~!Rd:Unable to read file
- :~!Wr:Unable to write file
- :~!OpF:Unable to open file %s
- :~!OpIn:Unable to open input file %s
- :~!OpOut:Unable to open output file
- :~!OpOutF:Unable to open output file %s
- :~!OpOut1:Unable to open file %s. If this file cannot be opened
- :~!OpOut2:then the installation process cannot continue.
- :~!ReopOut:Unable to reopen output file %s
- :~Over?1:The file %s already exists and is about
- :~Over?2:to be overwritten. Are you sure you want to overwrite this file?
- :~Over?3:Overwrite (Y/N)?
- :~File:Filename: %s
- :~!ChDrv:Unable to change to drive %c:
- :~!MkDir:Unable to make new directory
- Directory: %s
- :~!ChDir:Unable to change to new directory
- Directory: %s
- :~!RdID:Unable to read disk ID file %c:\DISK.ID
- :~!Mas1:The disk in drive %c: is not the Master Distribution Disk
- :~!Mas2:"%s" or a complete copy
- :~InsD1:Please place the distribution disk labeled
- :~InsD2:"%s" in drive %c:
- :~BadP1:The disk in drive %c: contains files for
- :~BadP2:the product %s
- :~BadV1:The version of the disk in drive %c: is %s
- :~BadV2:The version of %s which is now being installed is %s
- :~Ins1:Please place the disk labeled
-
- :~Ins2:in drive %c:
- :~A?:Do you wish to abort the installation (Y/N)?
- :~NoErr:No error
- :~Term:Execution terminated.
- :~Con?:Continue installation: OK or Cancel (O/C)?
- :~OK:OK
- :~Can:Cancel
- :~ARI?:Do you want to Abort, Retry, or Ignore (A/R/I)?
- :~RA?:Do you want to Retry or Abort (R/A)?
- :~R:Retry
- :~A:Abort
- :~BrowseCmds: <> <Pg Up> <Home> = Up. <> <Pg Dn> <End> = Down. <ENTER> = Done.
- :~ERR: ERROR
- :~ANY: PRESS ANY KEY
- :~VER: VERIFY
- ::
- ::
- ::
- :Lang:For ENGLISH, highlight this line and press ENTER
- :386MAX:386MAX has been detected as the memory manager on your system.
- :MaySlo:This may slow down the %s installer.
-
- Please be patient.
- :AutoDet:<<< Detect automatically >>>
- :Det:%s detected. OK?
- :SBclone:Sound Blaster clone
- :AdLib:AdLib music synthesizer card
- :AdLibG:AdLib Gold music synthesizer card
- :None:None
- :PCspkr:PC internal speaker
- :NowWhat?:What do you want to do?
- :EscCmd:You may press the [Esc] key at any time to abort.
- :SelectCmds: <> <> <Pg Up> <Pg Dn> = Select. <ENTER> = Done. <ESC> = Quit.
- :CheckBoxCmds: <SPACE> = Alternate between YES and NO. <ENTER> = Done. <ESC> = Quit.
- :!Avail:Unavailable
- :Dec?:Enter a decimal value
- :Hex?:Enter a hexadecimal value
- :Dir?:Choose a directory
- :HiNew:Thank you for purchasing %s.
- :HiOld:Since you have already installed %s,
- you may now select new system configuration options.
- :LongTime:Installing %s onto your computer system may
- take a fairly long time.
- :ProdDrv?1:%s requires that certain files be located on your
- hard disk.
- :ProdDrv?2:You may select any available drive with at least %s,000,000 bytes
- of free space.
- :ProdDrv?3:If the selected drive is on a network, you must have access rights to it.
- :ProdDir?:Please enter a directory name for %s.
- :CreDir:If the directory does not exist, it will be created automatically.
- :CopyPRJ1:You can improve game performance by copying the project file
- onto your hard disk. This step is optional.
- :CopyPRJ2:The file takes up almost %s,000,000 bytes of additional space.
- :PRJFits:Drive %s: has enough space for the project file.
- :!PRJFits:Drive %s: does not have enough space for the project file.
- :CopyPRJ?:Do you want to copy the project file to your hard disk?
- :!Copy:Don't copy the file
- :TryToCopy:Try to copy the file anyway
- :Win1:%s can be set up to be launched from Windows
- as well as from the DOS command line.
- :Win2:You may select this option even if you have not yet installed Windows.
- :Win?:Set up to launch from Windows?
- :WinDrv?1:Please select the drive where Windows is (or will be) installed.
- :WinDrv?2:Please select the drive where Windows is installed.
- :WinDir?:Please enter the name of the Windows directory.
- :DirExist:The directory %s already exists.
- :!DirExist:The directory %s does not exist.
- :NewCfg:Select new system configuration options
- :NewDrv:Choose another drive
- :NewDrvOrDir:Choose another drive or directory
- :Overwrite:Overwrite the directory
- :TryToInstall:Try to install anyway
- :Abort:Abort the installation
- :NotEnufDisk:The installed version of %s takes up
- almost %s,000,000 bytes of disk space.
-
- Drive %s: has less than %s,000,000 bytes available.
- :SysCfg:System Configuration
- :Snd:Sound device
- :IOA:I/O address
- :IRQ:IRQ number
- :DMA:Extra/DMA value
- :Mus:Music device
- :Smooth:Sound smoothing
- :EMS:Use XMS/EMS memory
- :EMSVideo:Use XMS/EMS memory for video buffers
- :LoadHi:Load drivers in upper memory
- :DigSnd:Digital soundtrack
- :CD:CD-ROM drive
- :Cfg?:Do you want to change the settings right now?
- :Snd?:Please select a sound device
- :IOA?:Enter an I/O address for the sound card (suggestion: %s)
- :IRQ?:Enter an IRQ number for the sound card (suggestion: %s)
- :DMA?:Enter an extra/DMA value for the sound card (suggestion: %s)
- :Mus?:Please select a music device
- :Add?:Please select additional system options.
-
- Do you want to . . .
- :Smooth?:Enable sound smoothing?
- :EMS?:Use XMS/EMS memory?
- :EMSVideo?:Use XMS/EMS memory for video buffers?
- :LoadHi?:Load the drivers in upper memory?
- :DigSnd?:Play a digital soundtrack during the opening movie?
- :CD?:Please select a CD-ROM drive for %s
- :README1:The %s installer has created a READ.ME file.
- :README2:The READ.ME file contains additional information which may not be
- in the printed documentation.
- :VuREADME?:Do you want to view the READ.ME file?
- :Done:The installation of %s is now complete.
- :ToPlay:To play the game, type
- :ToChg:To change the system settings from the command line, type
- :ExitWin:Windows is currently running. To launch %s
- under Windows, you must return to Windows, exit, and then restart
- Windows; or you may reboot your computer.
- ::
- ::
- ::
-