home *** CD-ROM | disk | FTP | other *** search
- EUR1PTCH.TXT contains information and instructions on the installation of
- EUR1_1.BGL, EUR1_1.BGL, EUR1.PAL, and EUR1.HAZ. Copyright (c) 1995 BAO, Ltd.
- *****************************************************************************
-
- NOTE: Installation of this update is not necessary if your README.EU1 from
- EUROPE I scenery says it is Version 1.02.
- -----------------------------------------------------------------------------
-
- Below each file this update installs is explained.
-
- RE: EUR1_1.BGL
-
- This file is a patch for the EUROPE I Scenery. When properly installed,
- this file effectively eliminates the pausing of .5 to 3 seconds that has been
- reported.
-
- This file replaces the EUR1_1.BGL that was shipped with the product.
-
-
- RE: EUR1_3.BGL
-
- This file is an update for the EUROPE I Scenery. When properly installed
- this file makes three VOR frequencies consistent with the maps included
- with the software package. The frequencies listed in the NAVLIST1.TXT file
- will also continue to work for these three VORs.
-
- The following VORs have been updated:
-
- VOR NEW OLD
- === === ===
- Allersberg - ALB 111.20 115.45
- Nienburg - NIE 116.50 117.00
- Wurzburg - WUR 110.20 116.35
-
-
- RE: EUR1.HAZ and EUR1.PAL
-
- These files make the haze feature of Flight Simulator 5.1 work with EUROPE I.
- They have no effect in releases of Flight Simulator prior to 5.1.
-
- Please be aware that since EUROPE I was developed prior to Flight Simulator
- 5.1 there are the following known limitations:
-
- 1. Some mountains appear too white in low visibility conditions, even as
- you get close.
- 2. Some water will appear gray or white in low visibility. The contrast
- is particularly notable when you are on the border of the EUROPE I
- scenery and the default world of Flight Sim.
- 3. Some airports don't come out of the haze properly.
- 4. You will notice that the colors are not as intense as without
- the haze palette. We believe that these colors are more realistic.
- 5. This patch is only effective if you have installed EUROPE I to your
- hard disk. If you are running from the CD-ROM (version 5.1 only) a
- patch cannot be made.
-
- *****************************************************************************
- INSTALLATION OF EUR1_50.EXE
- FOR FLIGHT SIMULATOR VERSION 5.0 and 5.0a USERS ONLY
-
- The following installation steps should be performed by users of Microsoft
- Flight Simulator with Versions 5.0 or 5.0a.
-
- [ If you have installed Flight Sim. in another directory besides what is ]
- [ indicated below or your 3.5" disk drive is not the A: drive then you ]
- [ must make the appropriate alterations to these procedures. ]
-
- The following must be performed after installing EUROPE I Scenery from
- the diskettes or CD-ROM to your hard disk. If you have downloaded this
- then unzip the files onto a floppy diskette using pkunzip. (You will need to
- keep the diskette with your release media.)
-
- 1. Place the update diskette in the A: drive.
-
- 2. Change to the A: drive by typing:
-
- a: <ENTER>
-
- 3. Execute the self-extracting update by typing:
-
- go50 c:\fltsim5 <ENTER>
-
- *****************************************************************************
- INSTALLATION OF EUR1_51.EXE
- FOR FLIGHT SIMULATOR VERSION 5.1 USERS ONLY
-
- The following installation steps should be performed by users of Microsoft
- Flight Simulator with Version 5.1.
-
- [ If you have installed Flight Sim. in another directory besides what is ]
- [ indicated below or your 3.5" disk drive is not the A: drive then you ]
- [ must make the appropriate alterations to these procedures. ]
-
- The following must be performed after installing EUROPE I Scenery from
- the diskettes or CD-ROM to your hard disk. If you have downloaded this
- then unzip the files onto a floppy diskette using pkunzip. (You will need to
- keep the diskette with your release media.)
-
- 1. Place the update diskette in the A: drive.
-
- 2. Change to the A: drive by typing:
-
- a: <ENTER>
-
- 3. Execute the self-extracting update by typing:
-
- go51 c:\fltsim5\europe1 <ENTER>
-
- NOTE: c:\fltsim5\europe1 is the default location for the EUROPE I
- scenery. If you have installed it in another directory such as
- "EUR1" then you should type: go51 c:\fltsim5\eur1
-
- -----------------------------------------------------------------------------
- Your update is now complete. Keep this update in the event you have to
- reinstall the EUROPE I Scenery from diskette or CD-ROM.
-
-
- ==============================================================================
- | (c) 1995 Bruce Artwick Organization, Ltd. Microsoft is a registered trade- |
- | mark of Microsoft Corporation. Flight Simulator is a trademark of Bruce |
- | Artwick. EUROPE I was designed for BAO by Alting Software under license, |
- | and produced by the Bruce Artwick Organization, Ltd. BAO is a trademark |
- | of Bruce Artwick Organization, Ltd. All rights reserved. |
- ==============================================================================
-