home *** CD-ROM | disk | FTP | other *** search
- /REM EzBarcode II demonstration text file
- /REM after loading this file with F6, print with F9
- /REM
- /TEXT "EzBarcode II Demonstration -- "
- /TEXT ""
- /TEXT "EzBarcode II can print several different types of barcodes:"
- /DM /C39 /D=4 /H=3 /YQ /X=, /C=1 /P=1 /Y=1 /A=0 /L=0 /NI "EzBarcode II","Code 39"
- /REM
- /REM Change /DM in the above line to /LJ for a laser jet
- /REM or /LQ for a 24 pin printer
- /REM
- /I25 "0123456789","Interleaved Code 2 of 5"
- /REM
- /REM once a command is set, such as /DM, EzBarcode II "remembers"
- /REM that command so only changed fields from line to line need be included.
- /REM
- /UPC "01234567890","UPC Code Version A"
- /EAN "012345678900","EAN-13A"
- /C93 "ABCDEFGHIJ","Code 93"
- /TEXT ""
- /TEXT "EzBarcode II also can print condensed (half as wide) bar codes,"
- /TEXT "although these usually print well only on a laser printer."
- /C39 /CY "EzBarcode II","Code 39"
- /TEXT ""
- /TEXT 'You can print bar codes from 1/9" high to 1" high, in'
- /TEXT 'increments of 1/9"'
- /C39 /CN /H=1 "EzBarcode II","Height = 1/9"'
- /H=3 "EzBarcode II","Height = 3/9"'
- /H=9 /D=8 "EzBarcode II","Height = 9/9"'
- /TEXT ""
- /TEXT "You can print bar codes up to 40 characters long:"
- /C39 /H=2 /D=3 "0123456789 -.$/+%ABCDEFGHIJKLMNOPQRSTUVWXYZ"
- /REM
- /REM Reset /H to 2, or EzBarcode II will remeber the /H=9 from the previous
- /REM line
- /REM
- /TEXT ""
- /REM New Page
- /NP /TEXT ""
- /TEXT 'The "lines to move" value determines the space from the top of '
- /TEXT 'one barcode to the top of the next. Lines are each 1/6".'
- /C39 /H=2 /D=3 "EzBarcode II","Lines value=3: 1/2" to next barcode'
- /D=6 "EzBarcode II","Lines value=6: 1" to next barcode'
- /D=3 "EzBarcode II"," "
- /TEXT ""
- /TEXT "Text can be omitted under the barcode, for security or other reasons."
- /C39 /NT "EzBarcode II","No text printed under barcode"
- /TEXT ""
- /TEXT "You can select extended, normal or compressed description"
- /TEXT "to the right of the bar code.(Extended not supported on Laser printer)"
- /C39 /TB /ED "EzBarcode II","Extended characters on Dot Matrix Printers"
- /ND "EzBarcode II","Normal characters in description"
- /CD "EzBarcode II","Compressed characters in description"
- /TEXT ""
- /TEXT "EzBarcode II gives you complete control over the widths of the bars"
- /TEXT "and spaces. The printer and bar code reader you use will "
- /TEXT "determine which values work best for you. Larger values "
- /TEXT "produce bar codes which will copy well in a reducing copier."
- /C39 /ND /S=121 "EzBarcode II"
- /S=122 "EzBarcode II"
- /S=123 "EzBarcode II"
- /S=223 "EzBarcode II"
- /S=233 "EzBarcode II"
- /S=234 "EzBarcode II"
- /S=244 "EzBarcode II"
- /NP /S=245 "EzBarcode II"
- /S=345 "EzBarcode II"
- /TEXT "EzBarcode II will print very large bar codes:"
- /C39 /S=899 /D=8 /H=9 "HUGE"
- /TEXT ""
- /TEXT "On dot matrix printers, EzBarcode II will automatically"
- /TEXT "switch to narrow characters for the text underneath "
- /TEXT "the bar code if the bar code is narrower than the text."
- /UPC /W /D=3 /H=2 "01234567890","UPC-A, wide type"
- /N "01234567890","UPC-A, narrow type"
- /TEXT ""
- /TEXT "You can vary the margin to the left of the bar code."
- /C39 /M=0 "EzBarcode II","No margin"
- /M=8 "EzBarcode II","Small margin"
- /M=16 "EzBarcode II","Medium margin"
- /M=24 "EzBarcode II","Large"
- /NP /P=1 /TEXT ""
- /TEXT "You can select the number of passes the printer makes, to"
- /TEXT "allow you to adjust for a weak ribbon."
- /C39 /M=0 /P=1 "EzBarcode II","One pass"
- /P=2 "EzBarcode II","Two passes"
- /P=4 "EzBarcode II","Four passes"
- /P=1 /TEXT ""
- /TEXT "Barcodes can be printed in columns across the page. In this case,"
- /TEXT "descriptions are not printed. You can specify the number of"
- /TEXT "columns. This makes it easy to print forms with bar codes, or"
- /TEXT "bar code menus for data entry."
- /C39 /Y=3 /Z=8 /E=20 /P=1 "PASS","REJECT","REWORK"
- "OIL LEAK","BAD WELD","AIR LEAK"
- /TEXT
- /TEXT "You can also vary the spacing between multiple bar codes:"
- /TEXT
- /C39 /D=4 /Y=5 /Z=3 /E=16 "JAN","FEB","MAR","APR","MAY"
- /Y=4 /E=30 "JUN","JUL","AUG","SEP"
- /Y=3 /E=58 "OCT","NOV","DEC"
- /Y=4 /E=30 "MON","TUE","WED","THU"
- /Y=5 /E=16 "FRI","SAT","SUN","012","345"
- /REM /NP /TEXT 'Autoincrement can be used in single or multi-column modes'
- /REM /C39 /D=4 /H=3 /YQ /X=, /C=1 /P=1 /A=0 /L=0 /Y=1 /AI /B=1 /T=PART413 "PART410"
- /REM /Y=3 /Z=7 /E=50 /T=PART414 "PART409"
- /NI /Y=1 /TEXT ""
- /REM
- /REM Autoincrement will change the bar code values of the above two
- /REM bar codes, so the file will be marked as changed, if you
- /REM save the changed file this section will not autoincrement.
- /REM
- /TEXT "+-----------------------------+"
- /TEXT "| TimeKeeping Systems, Inc. |"
- /TEXT "| 12434 Cedar Road |"
- /TEXT "| Cleveland, Ohio 44106 |"
- /TEXT "| (216) 229-2579 |"
- /TEXT "+-----------------------------+"
- /NP /TEXT " "