Select manual configuration and continue installation:
If the drives are not available, you will still be
able to complete the installation by selecting the
device driver and drive information manually.
Page 1 of 1
*** Perform patch operation ***
You must perform the patch operation if it is requested by the device driver. Without the proper patch, you may not be able to use the optical drive, or in some cases,
not even be able to boot your system.
The patch will not affect your system operation other than
the fact that the larger patch requires more RAM.
If you see a message stating that patching was unsuccessful,
install the patch manually before rebooting the system.
page 1 of 1
*** Update AUTOEXEC.BAT ***
Update AUTOEXEC.BAT:
Select this option to replace the existing AUTOEXEC.BAT with the updated AUTOEXEC.BAT. The original AUTOEXEC.BAT is saved as AUTOEXEC.BAK.
Do not update AUTOEXEC.BAT:
AUTOEXEC.BAT will not be updated by the Install
program.
View the updated AUTOEXEC.BAT:
Display the updated AUTOEXEC.BAT on the screen to
confirm that the changes have taken place properly.
page 1 of 1
*** Update CONFIG.SYS ***
Update CONFIG.SYS:
Select this option to replace the existing CONFIG.SYS with the updated CONFIG.SYS. The original CONFIG.SYS
is saved as CONFIG.BAK.
Do not update CONFIG.SYS:
CONFIG.SYS will not be updated by the Install
program.
View the updated CONFIG.SYS:
Display the updated CONFIG.SYS on the screen to
confirm that the changes have taken place properly.
page 1 of 1
*** SCSI Drive List ***
You can use the following keys to edit the table:
<Ins> - Add a new drive
<Del> - Delete the highlighted drive
<Enter> - Modify the highlighted drive options
<F7> - Exit the drive table
page 1 of 1
*** Installation options ***
Drive letter of boot drive:
Type the drive letter of your boot drive.
The default is drive "C:".
page 1 of 1
*** Insert Diskette ***
Insert a diskette which contains the requested file.
If the file is not in the root directory, you must
specify the correct path.
page 1 of 1
*** Install Main Menu ***
Install Software:
Select this option to copy the software from the
Install diskette to a hard drive. This option also
modifies AUTOEXEC.BAT and CONFIG.SYS files to install the device driver.
Update Device Driver Options:
Select this option to change options in the existing
device driver. You must already have the software installed on this hard drive.
Display README file:
Select this option to read important information not
included in the software manual.
page 1 of 1
*** Installation options ***
Enter software directory:
Enter the directory (including the drive letter) in
which to copy the software to. If the specified
directory does not exist, it will be created by the
Install program automatically.
page 1 of 1
*** ASPI Driver Configuration ***
Continue installation:
If a desired ASPI Driver is already installed, or you wish to continue without installing an ASPI Driver
Add a new ASPI Driver:
INSTALL will insert DEVICE= statement in CONFIG.SYS and
load the selected ASPI Driver
Page 1 of 1
*** Device Driver Configuration ***
Express Configuration:
Select this option to let the Install program
configure the device driver by scanning the SCSI Bus to detect all devices. Install will make all necessary changes to your AUTOEXEC.BAT, CONFIG.SYS files automatically.
Custom Configuration:
This option will scan the SCSI Bus described as above,
then allow you to change the device driver options manually.
Note: You must have the drives connected to the host SCSI card, properly configured and powered on.
page 1 of 1
*** Not enough disk space ***
If you are certain that you have enough disk space for
the installation, then continue. Otherwise cancel the installation.
page 1 of 1
*** Directory already exists ***
You are copying the files into the directory that already exists. If you continue with the installation, the files currently in that directory will be overwritten.
page 1 of 1
*** System reboot ***
Reboot the system:
The system must be rebooted to load the device driver.
This option may not work with some systems. In this case, you must reboot the system manually.
NOTE: Remove the Install diskette from its drive
to prevent the system to boot from a non-bootable diskette.
Do not reboot the system:
Select this option to exit the Install program and return to DOS prompt before rebooting the system.
page 1 of 1
*** Display File ***
Use the following keys to move the cursor and view the file:
<Esc> - Exit display file
<
> - Line up
<
> - Line down
<PgUp> - Page Up
<PgDn> - Page Down
<Ctrl+PgUp> - Top of file
<Ctrl+PgDn> - End of file
NOTE: You will not be able to edit the file.
page 1 of 1
*** Device driver options ***
Enter number of cache buffers:
Use this option to specify the number of cache
buffers used by the device driver.
NOTE: Each cache buffer requires additional RAM.
page 1 of 1
*** Device driver options ***
Load device driver in EMS:
Use this option to place the device driver in the
expanded memory if available. This will increase
the amount of conventional RAM available for DOS
applications.
page 1 of 1
*** Device driver options ***
Select SCSI drive configuration:
Select this field to specify the drive attributes.
page 1 of 1
*** Enter a new filename ***
Type a new filename for the temporary updated file.
NOTE: The new name must be a valid filename.
e.g., AUTOEXEC.NEW
CONFIG.NEW
page 1 of 1
*** Cartridge format conflict ***
You have selected incompatible cartridge format types.
You can return to the "Device Driver Options" and change
the cartridge format option for each drive, or select
DOS4/DOS3 compatible option.
page 1 of 1
*** Device driver options ***
Enter number of logical volumes:
Enter the maximum number of logical volumes you
wish to reserve for the drives.
page 1 of 1
*** CorelCDX option ***
Number of cache buffers:
Use this option to specify the number of cache
buffers used by CorelCDX.
NOTE: Each cache buffer requires additional RAM.
Load CorelCDX in EMS:
Use this option to place CorelCDX in the expanded
memory if available. This will increase the amount
of conventional RAM for DOS applications.
page 1 of 1
*** Device driver options ***
Select device driver type:
Select the device driver type.
page 1 of 1
*** Device driver options ***
CorelCDX options:
Select this field to configure Corel CD-ROM Extensions
for DOS (CorelCDX) options.
page 1 of 1
*** Interface options ***
Micro Channel System:
Select "Yes" if the system is a Micro Channel bus,
select "No" if the system is ISA (AT) or EISA bus.
page 1 of 1
*** Save the updated file with a new filename ***
This option allows you to save the updated file with
a new filename. You are still required to update the
original file for the changes to take effect.
If you discard the changes, the updated file will be lost.
page 1 of 1
*** Continue Installation ***
The installation program will proceed with AUTOEXEC.BAT
and CONFIG.SYS updates. The changes will be made to a
temporary copy of the each file first. You will have a chance to examine the changes before selecting the update option to replace the existing file.
page 1 of 1
*** Device driver options ***
Select number of drive letters:
Select the number of DOS drive letters you wish to
reserve for CD-ROM drives.
page 1 of 1
*** Device driver options ***
Select cartridge format:
Select the DOS cartridge format you wish to use
with your drive.
DOS3 only - MSDOS 3.3 and lower
DOS4 only - MSDOS 4.00 and higher
DOS4/DOS3 compatible - Using DOS4 but intend to access DOS3 cartridge as well
page 1 of 1
*** Device driver options ***
Select from drive list:
Select your drive from the drive list. There may be
more than one entry for some erasable and multi-
function drives for each physical sector size of the media, if you choose 512 byte entry, you will not be able to use 1024 byte media, therefore, select the media with the largest physical sector size you wish to use.
If your drive is not on the list, select the drive which matches your drive's capacity and physical sector size.
DOS3 and DOS4 columns indicate the patch size required
for the drive, if DOS4/DOS3 compatible cartridge format
is selected, DOS3 patch size will be used.
page 1 of 1
*** Device driver options ***
Select SCSI ID:
Select the SCSI ID of the drive.
page 1 of 1
*** Device driver options ***
Select SCSI LUN:
Select the SCSI LUN of the drive.
page 1 of 1
*** Device driver List ***
Select a device to configure the device driver options.
You can use the following keys:
<Esc> - Cancel and abort configuration
<Enter> - Modify the highlighted device driver
<Del> - Delete the highlighted device driver
<F7> - Accept and continue configuration
Page 1 of 1
*** Device driver options ***
Select Host Adapter #:
Select the Host Adapter # of the drive.
page 1 of 1
*** Copy Additional File ***
Install could not find the file in the current directory.
If you have the file available on a diskette or in another directory, select Yes to copy the file.
(.txt)