home *** CD-ROM | disk | FTP | other *** search
- =====================================================================
- Problems Caused Through Network Drivers.
- ---------------------------------------------------------------------
-
- The PALASM 4 menu system processes many commands by paging in and out and
- executing other programs supplied in the 'EXE' subdirectory. The following
- is a list of known system configurations that may cause menu operation
- failures:
-
- 1. Using PALASM 4 across networks not supported
- 2. Network drivers are loaded in low-memory (ie address < 640K)
-
- See below for more detailed explanations.
-
- ---------------------------------------------------------------------
- 1. Using PALASM 4 across networks not supported
- ---------------------------------------------------------------------
- No testing has been done to vailidate using the PALASM 4 software across PC
- networks. We do not currently recommend using the software in this manner.
-
- ---------------------------------------------------------------------
- 2. Network drivers are loaded in low-memory (ie address < 640K)
- ---------------------------------------------------------------------
- Loading Network drivers (eg, PC-NFS, 3COM, NOVEL, RAF etc. drivers in
- your CONFIG.SYS file) is known to cause sporadic failures in the PALASM 4
- memory system when loaded in low memory. It is not yet known whether
- these are problems cause by interference between the software or purely
- because they reduce the availability of low-end memory. If you are
- having problems try loading these drivers into high memory (ie. address
- > 640K)
-
- Note: You do not need to be using the network to potentially see
- problems through loaded network drivers.
-
-