Liren Large Software Subsidy 13/13.iso/p/p120/3.ddi/DEF/HIPC695.DEF

Text File | 1991-07-22 | 3.5 KB | 87 lines

BEGIN DDIF
-------------------------------------------------------------------------
-- DEVICE INFORMATION FILE  for Houston Instruments B-sized PC625      --
--                          plotter                                    --
-------------------------------------------------------------------------
------------------------------------------------------------------------
-- ******** Attention all programmers: you must document any ******** --
-- ******** and all changes you make to this file at the top! ******* --
------------------------------------------------------------------------

-- COMMUNICATIONS PARAMETERS
--   +-- commications port number  0        = use default file name below
--   |                   1 to  4  = SERIAL ports COM1 to COM4
--   |                  -1 to -3  = PARALLEL ports LPT1 to LPT3
--   |                  -4 to -6  = PARALLEL ports LPT1 to LPT3
--   |                              (using direct, hardware I/O)
--   |     SERIAL PORT PARAMETERS (default = 9600 baud, none, 1 stop, 8 data)
--   |   +------------------------------------------- BAUD RATE
--   |   |  +------------------------------ PARITY     0 =  9600
--   |   |  |  +---------------- STOP BITS   0 = NONE  1 =   300
--   |   |  |  |  +-- DATA BITS   0 = 1         1 = EVEN  2 =  1200
--   |   |  |  |  |    0 = 8      1 = 1         2 = ODD   3 =  2400
--   |   |  |  |  |    7 = 7      2 = 2                4 =  4800
--   |   |  |  |  |    8 = 8                   5 =  9600
--   |   |  |  |  |                           6 = 19200
--   |   |  |  |  |                           7 = 38400
--   |   |  |  |  |                           8 = 57600
--   v   v  v  v  v
101  2

-- DEFAULT FILE NAME  to use if communication port is '0' (above)
-- and file name or port number is not given at plot time
19 PD_PLOT.HI

1  'B A A4 A3 BS '   -- Paper Size Words (must have space at end)
105 0 1 1  0  0      -- XY axis rotation flag for each paper size

-- Paper sizes
201          0       0   15000    9800  -- B
202          0       0    9800    6380  -- A
203          0       0   10460    6180  -- A4
204          0       0   14360   10480  -- A3
205          0       0   14500    9800  -- BS

--  +--+----------- Smallest, largest pen numbers
--  |  |  +-------- Do pen changing optimization  { good for plotters, }
--  |  |  | +------ Do pen movement optimization  { bad for printers!  }
--  V  V  V V
102 1  6  1 1

--    +-----+---------- X,Y plotter units per inch
--    V     V
103 1000  1000

104 38               -- Max pen speed

-- PREDEFINED COMMAND STRINGS
-- format for these must be as follows:
--    +-- string name, up to eight characters, ending with a space
--    |      +-- plotter commands up to 55 characters.  Any characters
--    |      |   allowable, control codes must be formatted in '#n#'-style
--    |      |   notation.  This data will be sent verbatim to the plotter
--    |      |   so any base conversion or bias must already be incorporated
--    v         v
-- 'NAME     plotter command data'

20 'RESET    Z'
21 'OFFLINE  EL'
--22 'FEED     F' -- distance to feed must follow F (in plotter units)
--23
--24
--25
--26
--27
--28

-- PREFIX AND SUFFIX STRINGS:
-- data must be in quotes (single or double) names are case sensitive
-- EXAMPLE:  'RESET "some plotter data" FEED'
-- NAME(s) of Predefined string(s) or data to send BEFORE PLOT
--29  ''
-- NAME(s) of Predefined string(s) or data to send AFTER PLOT
--30  'FEED'

END DDIF
END