Liren Large Software Subsidy 13/13.iso/p/p070/5.ddi/INSTALL.DAT

Text File | 1992-07-17 | 34.1 KB | 879 lines

/*         Installation for the North American version of OrCAD/SDT         */
@DefineProject
    @Name       = "OrCAD/SDT"
    @Version    = "V4.13n"
@EndProject

@DefineVars
    @Dir @ORCADPROJ = "\\ORCAD"
    @Dir @ORCADEXE = "\\ORCADEXE"
    @Dir @ORCADESP = "\\ORCADESP"
@EndVars

@GetOption
    @Cls
                        Select one of the following items:


















 NOTE: If you haven't installed SDT Release IV from these disks yet don't
       choose any of the reinstallation choices, choose the standard install.
          @Option 1 = " Standard   Installation of SDT Release IV            PRODUCT files"
          @Option 2 = "          Reinstallation of SDT Release IV            LIBRARY files"
          @Option 3 = "          Reinstallation of SDT Release IV PROGRAM EXECUTABLE files"
          @Option 4 = "          Reinstallation of SDT Release IV     NETLIST FORMAT files"
          @Option 5 = "          Reinstallation of SDT Release IV           TUTORIAL files"
@EndOption

@If ( 1 [= @Option )
     @GetOption
     @Cls
     Please select your generic display adapter type for Schematic Design:

          @Option 100 = "EGA  display adapter"
          @Option 101 = "VGA  display adapter"
          @Option 102 = "VESA display adapter"
          @Option 103 = "Hercules  Monochrome"
     @EndOption
@EndIf

@If ( 1 [= @Option || 2 [= @Option )
     @GetOption
          @CheckBox
          @Cls
    Select one or more of the following libraries that you would like to
    install on your hard disk:















        The SPACE BAR toggles the selection between yes and no.
        The arrow keys and PGUP/PGDN keys move the selection up and down.
        'Y' sets all entries to YES, 'N' sets all to NO.
        Press <ENTER> when you have finished selecting.
     @Option 200 = " ALTERA_M    ALTERA APLUS+ EPLD MACROFUNCTIONS      "
     @Option 201 = " ALTERA_P    ALTERA APLUS+ EPLD PRIMITIVE FUNCTIONS "
     @Option 202 = "      AMD    FIFO'S, EPROMS, SRAMS, PROMS           "
     @Option 203 = "   ANALOG    OPAMPS, COMPARATORS, TIMERS, REGULATORS"
     @Option 273 = "  ANALOG1    OPAMPS, COMPARATORS, TIMERS, REGULATORS"
     @Option 274 = "  ANALOG2    OPAMPS, COMPARATORS, TIMERS, REGULATORS"
     @Option 275 = "  ANALOG3    OPAMPS, COMPARATORS, TIMERS, REGULATORS"
     @Option 282 = "  ANALOG4    OPAMPS, COMPARATORS, TIMERS, REGULATORS"
     @Option 204 = " ANLG_DEV    DSP PROCESSORS, FLOATING_POINT         "
     @Option 205 = " ASSEMBLY    PACKAGE OUTLINES FOR ASSEMBLY DRAWINGS "
     @Option 206 = "    ATMEL    CMOS EEPROMS, CMOS PEROMS, CMOS EPROMS "
     @Option 207 = "      BIT    BIPOLAR INTEGRATED TECHNOLOGIES        "
     @Option 208 = " BROKTREE    VIDEODAC'S, RAMDAC'S, PERIPHERALS      "
     @Option 209 = "    CHIPS    CHIPS AND TECH. EXCLUDING MICRO CHANNEL"
     @Option 210 = "  CHIPSMC    CHIPS AND TECH. MICRO CHANNEL SPECIFIC "
     @Option 211 = "     CMOS    CMOS DIGITAL LOGIC, GATES, INVERTERS   "
     @Option 212 = "   DALLAS    MULTIPORT MEMORY, MICROCONTROLLERS     "
     @Option 214 = "   DEVICE    CONNECTORS, HEADERS, CAPACITORS ETC.   "
     @Option 215 = "      ECL    ECL DIGITAL LOGIC, GATES, INVERTERS    "
     @Option 216 = "     EXEL    EEPLDS AND EEPROMS                     "
     @Option 217 = "  FLOWCHT    PROGRAMMING FLOWCHART SYMBOLS          "
     @Option 218 = "  FUJITSU    CMOS EEPROMS, NMOS NON-VOLATILE RAMS   "
     @Option 219 = " GOLDSTAR    SRAM, DRAM, VIDEO RAM, MASK ROM        "
     @Option 220 = "   HARRIS    CMOS MEMORY, CMOS MICROPROCESSORS      "
     @Option 221 = "  HITACHI    MOS DYNAMIC RAM, MOS DRAM MODULES      "
     @Option 222 = "   HUGHES    CMOS PROMS, CMOS LCD DRIVERS           "
     @Option 223 = "  HYUNDAI    CMOS DRAM, CMOS SRAM, CMOS EEPROM      "
     @Option 277 = "    IEEE1    IEEE DIGITAL LOGIC, GATES, INVERTERS   "
     @Option 278 = "    IEEE2    IEEE DIGITAL LOGIC, GATES, INVERTERS   "
     @Option 279 = "    IEEE3    IEEE DIGITAL LOGIC, GATES, INVERTERS   "
     @Option 280 = "    IEEE4    IEEE DIGITAL LOGIC, GATES, INVERTERS   "
     @Option 224 = "    INMOS    COMMERCIAL SRAM, MIL SRAM, CMOS SRAM   "
     @Option 225 = "    INTEL    MICROCONTROLLERS, RAMS, ROMS ETC.      "
     @Option 226 = "  INTEL_M    InTEL iPLSII EPLD MACROFUNCTIONS       "
     @Option 227 = "  INTEL_P    InTEL iPLSII EPLD PRIMITIVES           "
     @Option 228 = "       IR    CHIP SWITCH RELAYS, PHOTOVOLTAIC RELAYS"
     @Option 229 = "   LADDER    SWITCHES                               "
     @Option 276 = "    MAXIM    A/D CONVERTORS, D/A CONVERTORS         "
     @Option 230 = "   MEMORY    RAMS, ROMS, EPROMS, PROMS, SRAMS DRAMS "
     @Option 231 = "    METER    METERS                                 "
     @Option 232 = "   MICRON    DRAM, DRAM MODULES, MULTIPORT DRAM     "
     @Option 233 = " MITSUBIS    MOS DRAM, MOS DRAM MODULES, VRAM       "
     @Option 234 = "    MOSEL    VOICE ROMS, CACHE PRODUCTS             "
     @Option 235 = "     MOTO    MOTOROLA MPU'S AND PERIPHERALS         "
     @Option 236 = "    MOTO1    RECTIFIERS AND ZENER DIODES            "
     @Option 237 = "    MOTO2    RECTIFIERS AND ZENER DIODES            "
     @Option 238 = "    MOTO3    SM. SIGNAL TRANSISTORS, FETS AND DIODES"
     @Option 239 = "    MOTO4    SM. SIGNAL TRANSISTORS, FETS AND DIODES"
     @Option 240 = "    MOTO5    TMOS POWER MOSFETS, PCHANNEL, NCHANNEL "
     @Option 241 = "    MOTO7    SCR, TRIAC, UJT, PUT, SBS, SIDAC       "
     @Option 242 = "      MPS    D/A CONVERTORS, A/D CONVERTORS         "
     @Option 243 = "      OKI    LCD DRIVERS, LCD CONTROLLERS, DRAM     "
     @Option 244 = " OPTOISOL    OPTO COUPLERS, IR EMITTERS             "
     @Option 245 = " PANASON2    DRAM, VIDEO DRAM, SRAM, MASK ROM       "
     @Option 246 = " PANASONC    DRAM, VIDEO DRAM, SRAM, MASK ROM       "
     @Option 247 = "   PCBDEV    OrCAD/PCB COMPATIBLE PARTS FROM DEVICE "
     @Option 248 = " PLDGATES    OrCAD/PLD COMPATIBLE PARTS             "
     @Option 249 = "    POWER    POWER TRANSISTORS, POWER DARLINGTONS   "
     @Option 250 = "   PSPICE    LIBRARY FOR USE PSPICE                 "
     @Option 251 = "       RF    ANTENNAS, INDUCTORS, ELECTRON TUBES    "
     @Option 252 = "  SAMSUNG    DRAM, SRAM, EEPROM, MASK ROM           "
     @Option 253 = "     SEEQ    EEPROMS, FLASH, EPROMS, EEPLD          "
     @Option 254 = "  SGSTHOM    NMOS UV PROM, CMOS UV EPROM            "
     @Option 255 = "   SHAPES    CIRCLES, SQUARES                       "
     @Option 272 = "    SIPEX    ANALOG ARRAY, RS232/422 INTERFACE PROD."
     @Option 256 = "     SMOS    MEMORIES, MICROCOMPUTERS, PERIPHERALS  "
     @Option 257 = "     SONY    LASER DIODES, FETS                     "
     @Option 258 = "    SPICE    GENERIC SPICE LIBRARY PARTS            "
     @Option 281 = "      TI1    DATA ACQ. AND CONVERTORS, DISPLAY DRV's"
     @Option 259 = "      TI2    DRAM, DRAM MODULES, EPROMS, PROMS      "
     @Option 260 = "    TILSI    BIPOLAR LSI/VLSI DIGITAL LOGIC DEVICES "
     @Option 261 = "      TTL    DIGITAL LOGIC, GATES, INVERTERS        "
     @Option 262 = "     TTL1    DIGITAL LOGIC, GATES, INVERTERS        "
     @Option 263 = "  VLSITEC    SRAM, FIFO, CACHE TAG RAM              "
     @Option 264 = " VSTGATES    LIBRARY FOR USE WITH OrCAD/VST         "
     @Option 265 = " VSTOTHER    LIBRARY FOR USE WITH OrCAD/VST         "
     @Option 266 = "   VSTRAM    LIBRARY FOR USE WITH OrCAD/VST         "
     @Option 267 = "   VSTROM    LIBRARY FOR USE WITH OrCAD/VST         "
     @Option 268 = "   WEITEK    COPROCCESSORS                          "
     @Option 269 = "      WSI    CMOS EPROM, BIT SLICE PROCESSOR        "
     @Option 270 = "    XICOR    NOVRAM, SERIAL I/O, EEPROM             "
     @Option 271 = "    ZILOG    MICROPROCESSOR, CNTR/TIMER CONTROLLER  "
     @EndOption    /* highest entry = ANALOG4 @ 282 */
@EndIf

@If ( 1 [= @Option || 4 [= @Option )
     @GetOption
          @CheckBox
          @Cls
      Select one or more of the following netlist formats you would like
      to install on your hard disk:















        The SPACE BAR toggles the selection between yes and no.
        The arrow keys and PGUP/PGDN keys move the selection up and down.
        'Y' sets all entries to YES, 'N' sets all to NO.
        Press <ENTER> when you have finished selecting.
     @Option 300 = "   ALGOREX    Flat                                 "
     @Option 301 = "   ALLEGRO    Flat                                 "
     @Option 302 = "  ALTERAAD    Flat            ALTERA APLUS+        "
     @Option 303 = "  APPLBRAV    Flat            APPLICON BRAVO       "
     @Option 304 = "  APPLLEAP    Flat            APPLICON LEAP        "
     @Option 305 = "  CADNETIX    Flat                                 "
     @Option 306 = "     CALAY    Flat        Pre  1990 format         "
     @Option 334 = "   CALAY90    Flat        Post 1990 format         "
     @Option 307 = "      CASE    Flat                                 "
     @Option 308 = "      CBDS    Flat                                 "
     @Option 309 = "  COMPVISN    Flat                                 "
     @Option 310 = "      DUMP    Flat        Verbose human readable   "
     @Option 311 = "      EDIF    Flat/Hier.      EDIF 200             "
     @Option 312 = "  EEDESIGN    Flat                                 "
     @Option 313 = "    FUTURE    Flat                                 "
     @Option 314 = "      HILO    Flat                                 "
     @Option 333 = "     HDUMP         Hier.                           "
     @Option 315 = "  INTELADF    Flat            INTEL iPLSII         "
     @Option 316 = "  INTERGRA    Flat                                 "
     @Option 317 = "    MENTOR    Flat            Board Station V6     "
     @Option 318 = "  MULTIWIR    Flat                                 "
     @Option 319 = "   PADSASC    Flat                                 "
     @Option 335 = "  PADSASC0    Flat        PADS-ASCII w/12 chr names"
     @Option 320 = "      PCAD    Flat        Subset of the PDIF spec. "
     @Option 321 = "   PCADNLT    Flat                                 "
     @Option 322 = "     PCBII    Flat            OrCAD/PCB version 2  "
     @Option 323 = "     PDUMP    Flat                                 "
     @Option 324 = "    PLDNET    Flat        OrCAD/PLD schematic entry"
     @Option 325 = "  RACALRED    Flat                                 "
     @Option 326 = "  SCICARDS    Flat                                 "
     @Option 327 = "     SPICE    Flat/Hier.                           "
     @Option 328 = "     TANGO    Flat                                 "
     @Option 329 = "   TELESIS    Flat                                 "
     @Option 330 = "   VECTRON    Flat                                 "
     @Option 331 = "  VSTMODEL    Flat        OrCAD/VST schematic model"
     @Option 332 = "  WIRELIST    Flat           Verbose human readable"
     @EndOption
@EndIf

@If ( 1 [= @Option || 3 [= @Option)
    @DefineDisk
        @Label = "SDT Disk 1"
        @File       READ.ME
            @Out0k  \\@ORCADESP\\SDT\\README.SDT
        @BeginLib SDT1.PLB
            @File        *.EXE
                @Out0k \\@ORCADEXE\\*.EXE
        @EndLib
        @BeginLib   SDTDOCS.PLB
            @File   *.*
                @Out0k  \\@ORCADESP\\SDT\\*.*
            @EndLib
    @EndDisk
@EndIf

@DefineDisk
    @Label = "SDT Disk 2"

        @If ( 1 [= @Option || 3 [= @Option)
            @BeginLib   SDT2.PLB
                @File   *.EXE
                    @Out0k \\@ORCADEXE\\*.EXE
            @EndLib
        @EndIf

        @If ( 1 [= @Option || 4 [= @Option)
            @BeginLib   NETFORMS.PLB
            @If (300 [= @Option)
                @File   ALGOREX.*
                    @Out0k \\@ORCADESP\\SDT\\NETFORMS\\ALGOREX.*
            @EndIf

            @If (301 [= @Option)
                @File   ALLEGRO.*
                    @Out0k \\@ORCADESP\\SDT\\NETFORMS\\ALLEGRO.*
            @EndIf

            @If (302 [= @Option)
                @File   ALTERAAD.*
                    @Out0k \\@ORCADESP\\SDT\\NETFORMS\\ALTERAAD.*
            @EndIf

            @If (303 [= @Option)
                @File   APPLBRAV.*
                    @Out0k \\@ORCADESP\\SDT\\NETFORMS\\APPLBRAV.*
            @EndIf

            @If (304 [= @Option)
                @File   APPLLEAP.*
                    @Out0k \\@ORCADESP\\SDT\\NETFORMS\\APPLLEAP.*
            @EndIf

            @If (305 [= @Option)
                @File   CADNETIX.*
                    @Out0k \\@ORCADESP\\SDT\\NETFORMS\\CADNETIX.*
            @EndIf

            @If (306 [= @Option)
                @File   CALAY.*
                    @Out0k \\@ORCADESP\\SDT\\NETFORMS\\CALAY.*
            @EndIf

            @If (334 [= @Option)
                @File   CALAY90.*
                    @Out0k \\@ORCADESP\\SDT\\NETFORMS\\CALAY90.*
            @EndIf

            @If (307 [= @Option)
                @File   CASE.*
                    @Out0k \\@ORCADESP\\SDT\\NETFORMS\\CASE.*
            @EndIf

            @If (308 [= @Option)
                @File   CBDS.*
                    @Out0k \\@ORCADESP\\SDT\\NETFORMS\\CBDS.*
            @EndIf

            @If (309 [= @Option)
                @File   COMPVISN.*
                    @Out0k \\@ORCADESP\\SDT\\NETFORMS\\COMPVISN.*
            @EndIf

            @If (310 [= @Option)
                @File   DUMP.*
                    @Out0k \\@ORCADESP\\SDT\\NETFORMS\\DUMP.*
            @EndIf

            @If (311 [= @Option)
                @File   EDIF.*
                    @Out0k \\@ORCADESP\\SDT\\NETFORMS\\EDIF.*
            @EndIf

            @If (312 [= @Option)
                @File   EEDESIGN.*
                    @Out0k \\@ORCADESP\\SDT\\NETFORMS\\EEDESIGN.*
            @EndIf

            @If (313 [= @Option)
                @File   FUTURE.*
                    @Out0k \\@ORCADESP\\SDT\\NETFORMS\\FUTURE.*
            @EndIf

            @If (314 [= @Option)
                @File   HILO.*
                    @Out0k \\@ORCADESP\\SDT\\NETFORMS\\HILO.*
            @EndIf

            @If (333 [= @Option)
                @File   HDUMP.*
                    @Out0k \\@ORCADESP\\SDT\\NETFORMS\\HDUMP.*
            @EndIf

            @If (315 [= @Option)
                @File   INTELADF.*
                    @Out0k \\@ORCADESP\\SDT\\NETFORMS\\INTELADF.*
            @EndIf

            @If (316 [= @Option)
                @File   INTERGRA.*
                    @Out0k \\@ORCADESP\\SDT\\NETFORMS\\INTERGRA.*
            @EndIf

            @If (317 [= @Option)
                @File   MENTOR.*
                    @Out0k \\@ORCADESP\\SDT\\NETFORMS\\MENTOR.*
            @EndIf

            @If (318 [= @Option)
                @File   MULTIWIR.*
                    @Out0k \\@ORCADESP\\SDT\\NETFORMS\\MULTIWIR.*
            @EndIf

            @If (319 [= @Option)
                @File   PADSASC.*
                    @Out0k \\@ORCADESP\\SDT\\NETFORMS\\PADSASC.*
            @EndIf

            @If (335 [= @Option)
                @File   PADSASC0.*
                    @Out0k \\@ORCADESP\\SDT\\NETFORMS\\PADSASC0.*
            @EndIf

            @If (320 [= @Option)
                @File   PCAD.*
                    @Out0k \\@ORCADESP\\SDT\\NETFORMS\\PCAD.*
            @EndIf

            @If (321 [= @Option)
                @File   PCADNLT.*
                    @Out0k \\@ORCADESP\\SDT\\NETFORMS\\PCADNLT.*
            @EndIf

            @If (322 [= @Option)
                @File   PCBII.*
                    @Out0k \\@ORCADESP\\SDT\\NETFORMS\\PCBII.*
            @EndIf

            @If (323 [= @Option)
                @File   PDUMP.*
                    @Out0k \\@ORCADESP\\SDT\\NETFORMS\\PDUMP.*
            @EndIf

            @If (324 [= @Option)
                @File   PLDNET.*
                    @Out0k \\@ORCADESP\\SDT\\NETFORMS\\PLDNET.*
            @EndIf

            @If (325 [= @Option)
                @File   RACALRED.*
                    @Out0k \\@ORCADESP\\SDT\\NETFORMS\\RACALRED.*
            @EndIf

            @If (326 [= @Option)
                @File   SCICARDS.*
                    @Out0k \\@ORCADESP\\SDT\\NETFORMS\\SCICARDS.*
            @EndIf

            @If (327 [= @Option)
                @File   SPICE.*
                    @Out0k \\@ORCADESP\\SDT\\NETFORMS\\SPICE.*
            @EndIf

            @If (328 [= @Option)
                @File   TANGO.*
                    @Out0k \\@ORCADESP\\SDT\\NETFORMS\\TANGO.*
            @EndIf

            @If (329 [= @Option)
                @File   TELESIS.*
                    @Out0k \\@ORCADESP\\SDT\\NETFORMS\\TELESIS.*
            @EndIf

            @If (330 [= @Option)
                @File   VECTRON.*
                    @Out0k \\@ORCADESP\\SDT\\NETFORMS\\VECTRON.*
            @EndIf

            @If (331 [= @Option)
                @File   VSTMODEL.*
                    @Out0k \\@ORCADESP\\SDT\\NETFORMS\\VSTMODEL.*
            @EndIf

            @If (332 [= @Option)
                @File   WIRELIST.*
                    @Out0k \\@ORCADESP\\SDT\\NETFORMS\\WIRELIST.*
            @EndIf
        @EndLib
    @EndIf

    @If ( 1 [= @Option )
        @BeginLib   SLIB1.PLB
            @File   ANALOG.LIB
                @Out0k  \\@ORCADESP\\SDT\\LIBRARY\\ANALOG.LIB
            @File   DEVICE.LIB
                @Out0k  \\@ORCADESP\\SDT\\LIBRARY\\DEVICE.LIB
            @File   TTL.LIB
                @Out0k  \\@ORCADESP\\SDT\\LIBRARY\\TTL.LIB
            @If (279 [= @Option)
                @File     IEEE3.LIB
                    @Out0K \\@ORCADESP\\SDT\\LIBRARY\\IEEE3.LIB
            @EndIf
            @If (281 [= @Option)
                @File     TI1.LIB
                    @Out0K \\@ORCADESP\\SDT\\LIBRARY\\TI1.LIB
            @EndIf
        @EndLib
    @EndIf
    @If ( 2 [= @Option  )
        @BeginLib   SLIB1.PLB
            @If (203 [= @Option)
                @File     ANALOG.LIB
                    @Out0K \\@ORCADESP\\SDT\\LIBRARY\\ANALOG.LIB
            @EndIf
            @If (214 [= @Option)
                @File     DEVICE.LIB
                    @Out0K \\@ORCADESP\\SDT\\LIBRARY\\DEVICE.LIB
            @EndIf
            @If (261 [= @Option)
                @File     TTL.LIB
                    @Out0K \\@ORCADESP\\SDT\\LIBRARY\\TTL.LIB
            @EndIf
            @If (279 [= @Option)
                @File     IEEE3.LIB
                    @Out0K \\@ORCADESP\\SDT\\LIBRARY\\IEEE3.LIB
            @EndIf
            @If (281 [= @Option)
                @File     TI1.LIB
                    @Out0K \\@ORCADESP\\SDT\\LIBRARY\\TI1.LIB
            @EndIf
        @EndLib
    @EndIf
@EndDisk

@DefineDisk
    @Label = "SDT Disk 3"
        @If ( 1 [= @Option || 2 [= @Option  )
            @BeginLib   SLIB2.PLB
                @If (200 [= @Option)
                    @File     ALTERA_M.LIB
                        @Out0K \\@ORCADESP\\SDT\\LIBRARY\\ALTERA_M.LIB
                @EndIf
                @If (201 [= @Option)
                    @File     ALTERA_P.LIB
                        @Out0K \\@ORCADESP\\SDT\\LIBRARY\\ALTERA_P.LIB
                @EndIf
                @If (202 [= @Option)
                    @File     AMD.LIB
                        @Out0K \\@ORCADESP\\SDT\\LIBRARY\\AMD.LIB
                @EndIf
                @If (204 [= @Option)
                    @File     ANLG_DEV.LIB
                        @Out0K \\@ORCADESP\\SDT\\LIBRARY\\ANLG_DEV.LIB
                @EndIf
                @If (205 [= @Option)
                    @File     ASSEMBLY.LIB
                        @Out0K \\@ORCADESP\\SDT\\LIBRARY\\ASSEMBLY.LIB
                @EndIf
                @If (206 [= @Option)
                    @File     ATMEL.LIB
                        @Out0K \\@ORCADESP\\SDT\\LIBRARY\\ATMEL.LIB
                @EndIf
                @If (207 [= @Option)
                    @File     BIT.LIB
                        @Out0K \\@ORCADESP\\SDT\\LIBRARY\\BIT.LIB
                @EndIf
                @If (208 [= @Option)
                    @File     BROKTREE.LIB
                        @Out0K \\@ORCADESP\\SDT\\LIBRARY\\BROKTREE.LIB
                @EndIf
                @If (209 [= @Option)
                    @File     CHIPS.LIB
                        @Out0K \\@ORCADESP\\SDT\\LIBRARY\\CHIPS.LIB
                @EndIf
                @If (210 [= @Option)
                    @File     CHIPSMC.LIB
                        @Out0K \\@ORCADESP\\SDT\\LIBRARY\\CHIPSMC.LIB
                @EndIf
                @If (211 [= @Option)
                    @File     CMOS.LIB
                        @Out0K \\@ORCADESP\\SDT\\LIBRARY\\CMOS.LIB
                @EndIf
                @If (212 [= @Option)
                    @File     DALLAS.LIB
                        @Out0K \\@ORCADESP\\SDT\\LIBRARY\\DALLAS.LIB
                @EndIf
                @If (215 [= @Option)
                    @File     ECL.LIB
                        @Out0K \\@ORCADESP\\SDT\\LIBRARY\\ECL.LIB
                @EndIf
                @If (216 [= @Option)
                    @File     EXEL.LIB
                        @Out0K \\@ORCADESP\\SDT\\LIBRARY\\EXEL.LIB
                @EndIf
                @If (217 [= @Option)
                    @File     FLOWCHT.LIB
                        @Out0K \\@ORCADESP\\SDT\\LIBRARY\\FLOWCHT.LIB
                @EndIf
                @If (218 [= @Option)
                    @File     FUJITSU.LIB
                        @Out0K \\@ORCADESP\\SDT\\LIBRARY\\FUJITSU.LIB
                @EndIf
                @If (219 [= @Option)
                    @File     GOLDSTAR.LIB
                        @Out0K \\@ORCADESP\\SDT\\LIBRARY\\GOLDSTAR.LIB
                @EndIf
                @If (220 [= @Option)
                    @File     HARRIS.LIB
                        @Out0K \\@ORCADESP\\SDT\\LIBRARY\\HARRIS.LIB
                @EndIf
                @If (221 [= @Option)
                    @File     HITACHI.LIB
                        @Out0K \\@ORCADESP\\SDT\\LIBRARY\\HITACHI.LIB
                @EndIf
                @If (222 [= @Option)
                    @File     HUGHES.LIB
                        @Out0K \\@ORCADESP\\SDT\\LIBRARY\\HUGHES.LIB
                @EndIf
                @If (223 [= @Option)
                    @File     HYUNDAI.LIB
                        @Out0K \\@ORCADESP\\SDT\\LIBRARY\\HYUNDAI.LIB
                @EndIf
                @If (224 [= @Option)
                    @File     INMOS.LIB
                        @Out0K \\@ORCADESP\\SDT\\LIBRARY\\INMOS.LIB
                @EndIf
                @If (225 [= @Option)
                    @File     INTEL.LIB
                        @Out0K \\@ORCADESP\\SDT\\LIBRARY\\INTEL.LIB
                @EndIf
                @If (226 [= @Option)
                    @File     INTEL_M.LIB
                        @Out0K \\@ORCADESP\\SDT\\LIBRARY\\INTEL_M.LIB
                @EndIf
                @If (227 [= @Option)
                    @File     INTEL_P.LIB
                        @Out0K \\@ORCADESP\\SDT\\LIBRARY\\INTEL_P.LIB
                @EndIf
                @If (228 [= @Option)
                    @File     IR.LIB
                        @Out0K \\@ORCADESP\\SDT\\LIBRARY\\IR.LIB
                @EndIf
                @If (229 [= @Option)
                    @File     LADDER.LIB
                        @Out0K \\@ORCADESP\\SDT\\LIBRARY\\LADDER.LIB
                @EndIf
                @If (230 [= @Option)
                    @File     MEMORY.LIB
                        @Out0K \\@ORCADESP\\SDT\\LIBRARY\\MEMORY.LIB
                @EndIf
                @If (231 [= @Option)
                    @File     METER.LIB
                        @Out0K \\@ORCADESP\\SDT\\LIBRARY\\METER.LIB
                @EndIf
                @If (232 [= @Option)
                    @File     MICRON.LIB
                        @Out0K \\@ORCADESP\\SDT\\LIBRARY\\MICRON.LIB
                @EndIf
                @If (233 [= @Option)
                    @File     MITSUBIS.LIB
                        @Out0K \\@ORCADESP\\SDT\\LIBRARY\\MITSUBIS.LIB
                @EndIf
                @If (234 [= @Option)
                    @File     MOSEL.LIB
                        @Out0K \\@ORCADESP\\SDT\\LIBRARY\\MOSEL.LIB
                @EndIf
                @If (235 [= @Option)
                    @File     MOTO.LIB
                        @Out0K \\@ORCADESP\\SDT\\LIBRARY\\MOTO.LIB
                @EndIf
                @If (236 [= @Option)
                    @File     MOTO1.LIB
                        @Out0K \\@ORCADESP\\SDT\\LIBRARY\\MOTO1.LIB
                @EndIf
                @If (237 [= @Option)
                    @File     MOTO2.LIB
                        @Out0K \\@ORCADESP\\SDT\\LIBRARY\\MOTO2.LIB
                @EndIf
                @If (238 [= @Option)
                    @File     MOTO3.LIB
                        @Out0K \\@ORCADESP\\SDT\\LIBRARY\\MOTO3.LIB
                @EndIf
                @If (239 [= @Option)
                    @File     MOTO4.LIB
                        @Out0K \\@ORCADESP\\SDT\\LIBRARY\\MOTO4.LIB
                @EndIf
                @If (240 [= @Option)
                    @File     MOTO5.LIB
                        @Out0K \\@ORCADESP\\SDT\\LIBRARY\\MOTO5.LIB
                @EndIf
                @If (241 [= @Option)
                    @File     MOTO7.LIB
                        @Out0K \\@ORCADESP\\SDT\\LIBRARY\\MOTO7.LIB
                @EndIf
                @If (242 [= @Option)
                    @File     MPS.LIB
                        @Out0K \\@ORCADESP\\SDT\\LIBRARY\\MPS.LIB
                @EndIf
                @If (243 [= @Option)
                    @File     OKI.LIB
                        @Out0K \\@ORCADESP\\SDT\\LIBRARY\\OKI.LIB
                @EndIf
                @If (244 [= @Option)
                    @File     OPTOISOL.LIB
                        @Out0K \\@ORCADESP\\SDT\\LIBRARY\\OPTOISOL.LIB
                @EndIf
                @If (245 [= @Option)
                    @File     PANASON2.LIB
                        @Out0K \\@ORCADESP\\SDT\\LIBRARY\\PANASON2.LIB
                @EndIf
                @If (246 [= @Option)
                    @File     PANASONC.LIB
                        @Out0K \\@ORCADESP\\SDT\\LIBRARY\\PANASONC.LIB
                @EndIf
                @If (247 [= @Option)
                    @File     PCBDEV.LIB
                        @Out0K \\@ORCADESP\\SDT\\LIBRARY\\PCBDEV.LIB
                @EndIf
                @If (248 [= @Option)
                    @File     PLDGATES.LIB
                        @Out0K \\@ORCADESP\\SDT\\LIBRARY\\PLDGATES.LIB
                @EndIf
                @If (249 [= @Option)
                    @File     POWER.LIB
                        @Out0K \\@ORCADESP\\SDT\\LIBRARY\\POWER.LIB
                @EndIf
                @If (250 [= @Option)
                    @File     PSPICE.LIB
                        @Out0K \\@ORCADESP\\SDT\\LIBRARY\\PSPICE.LIB
                @EndIf
                @If (251 [= @Option)
                    @File     RF.LIB
                        @Out0K \\@ORCADESP\\SDT\\LIBRARY\\RF.LIB
                @EndIf
                @If (252 [= @Option)
                    @File     SAMSUNG.LIB
                        @Out0K \\@ORCADESP\\SDT\\LIBRARY\\SAMSUNG.LIB
                @EndIf
                @If (253 [= @Option)
                    @File     SEEQ.LIB
                        @Out0K \\@ORCADESP\\SDT\\LIBRARY\\SEEQ.LIB
                @EndIf
                @If (254 [= @Option)
                    @File     SGSTHOM.LIB
                        @Out0K \\@ORCADESP\\SDT\\LIBRARY\\SGSTHOM.LIB
                @EndIf
                @If (255 [= @Option)
                    @File     SHAPES.LIB
                        @Out0K \\@ORCADESP\\SDT\\LIBRARY\\SHAPES.LIB
                @EndIf
                @If (256 [= @Option)
                    @File     SMOS.LIB
                        @Out0K \\@ORCADESP\\SDT\\LIBRARY\\SMOS.LIB
                @EndIf
                @If (257 [= @Option)
                    @File     SONY.LIB
                        @Out0K \\@ORCADESP\\SDT\\LIBRARY\\SONY.LIB
                @EndIf
                @If (258 [= @Option)
                    @File     SPICE.LIB
                        @Out0K \\@ORCADESP\\SDT\\LIBRARY\\SPICE.LIB
                @EndIf
                @If (259 [= @Option)
                    @File     TI2.LIB
                        @Out0K \\@ORCADESP\\SDT\\LIBRARY\\TI2.LIB
                @EndIf
                @If (260 [= @Option)
                    @File     TILSI.LIB
                        @Out0K \\@ORCADESP\\SDT\\LIBRARY\\TILSI.LIB
                @EndIf
                @If (262 [= @Option)
                    @File     TTL1.LIB
                        @Out0K \\@ORCADESP\\SDT\\LIBRARY\\TTL1.LIB
                @EndIf
                @If (263 [= @Option)
                    @File     VLSITEC.LIB
                        @Out0K \\@ORCADESP\\SDT\\LIBRARY\\VLSITEC.LIB
                @EndIf
                @If (264 [= @Option)
                    @File     VSTGATES.LIB
                        @Out0K \\@ORCADESP\\SDT\\LIBRARY\\VSTGATES.LIB
                @EndIf
                @If (265 [= @Option)
                    @File     VSTOTHER.LIB
                        @Out0K \\@ORCADESP\\SDT\\LIBRARY\\VSTOTHER.LIB
                @EndIf
                @If (266 [= @Option)
                    @File     VSTRAM.LIB
                        @Out0K \\@ORCADESP\\SDT\\LIBRARY\\VSTRAM.LIB
                @EndIf
                @If (267 [= @Option)
                    @File     VSTROM.LIB
                        @Out0K \\@ORCADESP\\SDT\\LIBRARY\\VSTROM.LIB
                @EndIf
                @If (268 [= @Option)
                    @File     WEITEK.LIB
                        @Out0K \\@ORCADESP\\SDT\\LIBRARY\\WEITEK.LIB
                @EndIf
                @If (269 [= @Option)
                    @File     WSI.LIB
                        @Out0K \\@ORCADESP\\SDT\\LIBRARY\\WSI.LIB
                @EndIf
                @If (270 [= @Option)
                    @File     XICOR.LIB
                        @Out0K \\@ORCADESP\\SDT\\LIBRARY\\XICOR.LIB
                @EndIf
                @If (271 [= @Option)
                    @File     ZILOG.LIB
                        @Out0K \\@ORCADESP\\SDT\\LIBRARY\\ZILOG.LIB
                @EndIf
                @If (272 [= @Option)
                    @File     SIPEX.LIB
                        @Out0K \\@ORCADESP\\SDT\\LIBRARY\\SIPEX.LIB
                @EndIf
                @If (273 [= @Option)
                    @File     ANALOG1.LIB
                        @Out0K \\@ORCADESP\\SDT\\LIBRARY\\ANALOG1.LIB
                @EndIf
                @If (274 [= @Option)
                    @File     ANALOG2.LIB
                        @Out0K \\@ORCADESP\\SDT\\LIBRARY\\ANALOG2.LIB
                @EndIf
                @If (275 [= @Option)
                    @File     ANALOG3.LIB
                        @Out0K \\@ORCADESP\\SDT\\LIBRARY\\ANALOG3.LIB
                @EndIf
                @If (282 [= @Option)
                    @File     ANALOG4.LIB
                        @Out0K \\@ORCADESP\\SDT\\LIBRARY\\ANALOG4.LIB
                @EndIf
                @If (276 [= @Option)
                    @File     MAXIM.LIB
                        @Out0K \\@ORCADESP\\SDT\\LIBRARY\\MAXIM.LIB
                @EndIf
                @If (277 [= @Option)
                    @File     IEEE1.LIB
                        @Out0K \\@ORCADESP\\SDT\\LIBRARY\\IEEE1.LIB
                @EndIf
                @If (278 [= @Option)
                    @File     IEEE2.LIB
                        @Out0K \\@ORCADESP\\SDT\\LIBRARY\\IEEE2.LIB
                @EndIf
                @If (280 [= @Option)
                    @File     IEEE4.LIB
                        @Out0K \\@ORCADESP\\SDT\\LIBRARY\\IEEE4.LIB
                @EndIf
            @EndLib
        @EndIf

        @If (1 [= @Option)
            @BeginLib   MACRO.PLB
                @File   *.*
                    @Out0k  \\@ORCADPROJ\\TEMPLATE\\*.*
                @File   *.*
                    @Out0k  \\@ORCADPROJ\\TUTOR\\*.*
            @EndLib
        @EndIf

        @If (1 [= @Option || 5 [= @Option)
            @BeginLib  TUTOR.PLB
                @File    *.*
                    @Out0k   \\@ORCADPROJ\\TUTOR\\*.*
            @EndLib
        @EndIf

@EndDisk

@If ( 1 [= @Option )
    @Finish
        @ChDrive @OutDrive
        @ChDir   "@ORCADPROJ\\TEMPLATE"

        @System "echo PDRV='@OutDrive:@ORCADESP\\DRV\\' > SDT.cfg"
        @If ( 100 [= @Option )
             @System "echo DD='EGA16E.DRV' >> SDT.cfg"
        @ElseIf (101 [= @Option )
             @System "echo DD='VGA640.DRV' >> SDT.cfg"
        @ElseIf (102 [= @Option )
             @System "echo DD='VESA800.DRV' >> SDT.cfg"
        @ElseIf (103 [= @Option )
             @System "echo DD='HGC2.DRV' >> SDT.cfg"
        @Else
             @System "echo DD='EGA16E.DRV' >> SDT.cfg"
        @EndIf

        @System "echo PLIB='@OutDrive:@ORCADESP\\SDT\\LIBRARY\\*.LIB' >> SDT.cfg"
        @System "echo LIB='TTL.LIB' >> SDT.cfg"
        @System "echo LIB='DEVICE.LIB' >> SDT.cfg"
        @System "echo LIB='ANALOG.LIB' >> SDT.cfg"

        @System "@OutDrive:@ORCADEXE\\SDT_C /B"
        @System "Copy SDT.cfg \\@ORCADPROJ\\TUTOR\\SDT.cfg"
        @System "Copy SDT.bcf \\@ORCADPROJ\\TUTOR\\SDT.bcf"

        @Cls

                      Orcad Schematic Design Tools @Version



                             Installation Complete



           Remember to send in the registration card to receive the
               OrCAD Pointer newsletter and product updates.

        @Pause
    @EndFinish
@Else
    @Finish
    @ChDrive @OutDrive
    @ChDir   "@ORCADPROJ\\TEMPLATE"

    @Cls

                      Orcad Schematic Design Tools @Version



                             Installation Complete






    @Pause
    @EndFinish
@EndIf