COPYRIGHT (c) 1985 by Novell, Inc. All Rights Reserved.
All information
1. Configure the migration utility
Working directory:
2. Configure the source server
DCDB file name:
2. Define the DCDB source file
Select information to migrate
Information to migrate:
Data files
Trustee assignments
Users
Groups
User restrictions
Default account restrictions
A DCDB file could not be located with this name in this directory.
NetWare v4.x
Print queues and print servers
(Press <Enter> to select information)
(Information selected)
Press <enter> to change the default path/file name of the Domain Control Data Base file.
You must select at least one item from the list.
Error/warning action:
Select error/warning action
Pause after errors and warnings
Do not pause after errors and warnings
Source volumes to migrate:
Select volumes to migrate
(Press <Enter> to select volumes)
(Volumes selected)
3. Define the NetWare destination server (v3.X - v4.X)
Server:
Select Yes to start the migration. Select No to return to the previous menu.
Press <Enter> to view the list of source drives and their destination paths.
(Press <Enter> to select a server)
Volume destinations:
Next screen
(Press <Enter> to specify destinations)
Specify destination volume and directory
The path specified is not valid. Please enter a valid path.
IBM LAN Server v1.2 - v1.3
IBM LAN Server v1.0 - v1.1
IBM PCLP v1.3 Extended Services
NetWare v3.x
NetWare v2.x
NetWare v2.0a
NetWare Lite
Select the source LAN type
The source LAN chosen is not supported.
Standard migration
Custom migration
Select a migration option
Migration cannot be completed. You must establish a connection to the source server specified.
(Default)
The Working directory does not exist. Create it?
The drive specified is not valid. Please enter a valid disk drive.
The drive where the working directory is located does not have enough disk space. A minimum of 5Mb must be free.
2. Define the NetWare source server (v2.X - v3.X)
Accept changes
The path specified was not valid. A path must be referenced from a drive not a server/volume name.
Next field
Previous field
Edit field
Select an option
Return to configuration
Exit the program
Previous menu
Display options
Select 'Standard migration' if you want to migrate all information and you have not used this utility before.
Select 'Custom migration' if you have used this utility before and want to choose specific migration options.
Highlight the LAN you are migrating from and press <Enter>.
Press the down arrow key to accept the default, or press <Enter> to edit the path where migration reports and the intermediate file will be stored.
Press <Enter> to select an error/warning option.
Display drives
Display volumes
Select this option to pause after errors and warnings. At each pause, you can continue, ignore errors, or stop the migration. All errors will be listed in the report file.
Select this option to turn off prompting after errors and warnings. All errors will be listed in the report file.
Would you like to select a different server?
<<< BAD MESSAGE >>>
Display servers
Press <Enter> to select the source NetWare server.
Press <Enter> to select LAN information to migrate.
Press <Enter> to select the volumes from which data files and trustee assignments will be migrated.
Press <Enter> to select the destination NetWare server.
Press <Enter> to view the list of source volumes with their corresponding destination paths.
List available servers
Mark an option
Mark a volume
Cancel changes
Specify path
Accept marked options
Accept the path
133: A directory specified in the path was longer than the 8.3 DOS standard.
Continue the migration
Stop the migration
Select an action
The <Esc> key was pressed during the migration process. Please select an action.
CoPyRiGhT=(c) Copyright 1992, 1993, Novell, Inc. All rights reserved.
The spacebar was pressed during the migration process. Select an action.
A migration error has occurred and is displayed in the migration log above.
(Y=Yes/N=No/I=Ignore errors)
You may continue with the migration, or you may stop, rectify the problem, and perform the migration again.
Accept marked volumes
Start migration
Migrate to the working directory
Migrate from the working directory
Exit (return to DOS)
NaMe=MIGRATE.MSG
Test functions
Select this option to migrate the selected information from the working directory to the destination server.
Select this option to terminate the utility. When you restart the utility, configuration information will be restored.
View migration reports
Select this option to view reports from previous migrations.
Select a migration action
Migrate
103: An internal error has occurred. The NWParsePath() function failed with %s.
Data files cannot be migrated using this type of migration.
Select a server where you are logged in as a SUPERVISOR-equivalent user. To see a list of servers where you are not logged in, press <Insert>.
Select a server
The default, 'All information' will migrate everyting below. For specific items only, select each item by highlighting it and pressing <F5>.
Select the volumes from which data will be migrated by highlighting each volume and pressing <F5>.
To edit a destination path, highlight it and press <Enter>. Press <Esc> to return to the configuration screen.
Enter the NetWare volume and directory to which data files will be migrated. Press <Insert> to browse the existing directory structure on the destination server.
Highlight the directory you want to migrate data files to, then press <Enter> to select it. Press <Esc> when the destination path is complete.
Highlight the volume you want to migrate data files to; then select it by pressing <Enter>. Press <Esc> when the destination path is complete.
Done browsing
Source path
Spacebar
Stop migrating
Pause
This report shows the information being migrated. This information is also written to the report file specified in the header.
Continue
Select to go to test mode.
You must specify a destination server before specifying the volume destinations.
Delete all marked reports?
102: You must specify a working directory before proceeding.
Migrating... (log file: %s)
View log file %s
2. Define the LAN Server source domain (v1.2 - v1.3)
Close the report
100: The program attempted to access LAN Server network information, but the network failed to process the request. LAN Server error code: %d.
Printer queues
VeRsIoN=4.00b
Destination path
The drive specified is not ready. Make sure that a disk is in the drive and that the door is closed. Then re-specify the working directory.
You must specify a valid working directory before the migration utility can proceed.
Use the Up and Down arrow keys and the Page Up and Page Down keys to scroll through the report.
The selected server is running NetWare v%d.%d. NetWare v%s is required.
Select a server to attach to.
Enter the name of a SUPERVISOR-equivalent user.
Enter the password for the user name. The password will not be echoed.
Select 'Yes' to log out from the server. Select 'No' to remain logged in to the server.
You have not selected any source volumes to migrate. Select the volumes to migrate using the 'Source volumes to migrate' field; then specify the destination for the volumes.
Migration report and error files
Press <Enter> to view the highlighted report. Press <Delete> to delete the report.
Return to migration menu
View report
Delete marked reports
Previous screen
Migration menu
Accounting information
Delete migration report %s?
Select this option to start the migration.
Migration from the source server to the working directory is complete.
(Destinations specified)
Mark a report
Do you want to continue with the migration?
Data file and directory attributes
Edit the DCDB path
159: An Across the Wire migration cannot be performed from a server to itself.
Assign random passwords
Assign no passwords
You do not have Read, Write, and Create rights in the specified working directory.
You have no connection to the server specified in the working directory path. Enter a path that is either on a server to which you are connected, or on a local drive.
You are not logged in to this server as a SUPERVISOR-equivalent user. Please select another server; or log out of this server, log back in as a SUPERVISOR-equivalent user, and select the server.
Logout
Migration from the source server to the destination server is complete.
Migration from the working directory to the destination server is complete.
Passwords:
Assign passwords?
Choose this option to generate random passwords for migrated users. The passwords will be stored in the file SYS:SYSTEM\NEW.PWD on the destination server.
Choose this option to give all migrated users an empty password on the destination server.
Choose whether or not to assign random passwords for users that are migrated to the destination server.
Browse directories
The program could not open the file MIGRATE.EXP. Therefore, platform-specific objects cannot be screened out during the migration.
A total of %d errors or warnings were reported during migration.
No errors or warnings were reported during migration.
Migration cannot be completed. You must select a source server to migrate from.
Migration cannot be completed. You must select information to migrate.
Migration cannot be completed. You must select the destination server to migrate to.
Migration cannot be completed. You must specify the destination for the volumes.
Migration cannot be completed. You must select source volumes to migrate.
The directory does not exist. Create it?
The destination name must contain a server and volume name.
Domain:
Volume %s does not exist on the destination server. Please re-edit the path. (Press <Insert> to browse lists of available directories and volumes.)
Press <Enter> to edit the LAN Server source domain name. Your workstation must already be logged onto this domain.
105: A memory allocation failure has occurred. Restart this utility after configuring DOS for more memory.
106: You cannot create more than 999 migration reports. Delete some reports and try again.
107: The report file cannot be opened.
108: The report file cannot be written to.
109: No report file names could be read from the working directory.
110: The report file, %s, cannot be deleted.
111: You do not have enough memory to create a screen portal.
Browse directory
113: An internal error occurred during an attempt to display text.
114: An internal error occurred during an attempt to read the report file.
Select a volume
Previous list
117: The program cannot create the intermediate file.
118: The program cannot write to the destination bindery.
119: The migration report cannot be opened.
120: The intermediate file (MIGRATE.GMF) could not be opened.
121: The program cannot get the connection ID for the destination server.
122: The directory %s cannot be created.
123: An internal error has occurred. The program cannot get the current working directory.
124: An internal error has occurred. The drives cannot be changed.
125: An internal error has occurred. The directories cannot be changed.
126: An internal error has occurred. The program cannot get your effective rights.
127: An internal error has occurred. The program cannot get NetWare server information.
128: An internal error has occurred. Could not expand path fragment - %s.
129: An internal error has occurred. The program cannot make directory %s.
130: The program could not allocate memory while migrating to the destination LAN.
131: The program could not allocate memory while migrating from the source LAN.
132: An internal error has occurred. The source bindery could not be read.
You must specify a source server before specifying the source volumes to migrate.
You must select 'Users' in order to select 'User restrictions'.
You have no connection to the source server. For Across-The-Wire migration, modify this field. For Same-Server migration, do NOT modify this field. Modify this field? (Y=Yes/N=No):
LAN Server drives to migrate:
(Press <Enter> to select drives)
(Servers and drives selected)
Select servers and drives to migrate
Press <Enter> to select domain drives to migrate.
Select servers and drives by highlighting a line and pressing <F5>. Make as many selections as needed.
137: You must have the Administrative privilege in the LAN Server domain to access LAN Server network information.
153: OS/2: sufficient memory is not available.
Login to server
154: The LAN Server network device driver has not been started on the workstation.
158: The server service has not been started.
157: The Requester service has not been started.
152: The server is not configured for transactions.
138: You are not logged on to the LAN Server domain. Please logon to the domain as a user with administrative privileges, and try again.
150: LAN Server network access is denied.
Access control profiles
Aliases
Select the destination LAN type
Across-The-Wire migration
Same-Server migration
Select the type of migration
140: The requester service has not been started.
151: No domain controller was found on this domain.
135: The specified path points to a file, not a directory.
Select this option to return to the configuration form.
Select this option to migrate from one server directly to another. Your workstation must have a valid connection to both servers concurrently.
Select this option to migrate from a server to the working directory, or from the working directory back to the same server. Data files cannot be migrated with this option.
Highlight the server type you would like to migrate to and press <Enter>.
(.txt)