Liren Large Software Subsidy 5/05.iso/a/a069/1.img/TRSOURCE.EXE/BITSTRIP.ASM

Assembly Source File | 1990-10-22 | 5.7 KB | 287 lines

; Utility: BITSTRIP
;
; by Ralph Davis
;
; Placed in the public domain by Tom Rettig Associates, 10/22/1990.
;

;***********************************************
CODESEG SEGMENT BYTE PUBLIC
        ASSUME  CS:CODESEG,DS:CODESEG,ES:CODESEG
;
;----------------------------------------------
STRIP PROC FAR
ORG   100H
START:       JMP  ENTER
KEY_BUFF     DB   80,?
ASCIIZ       DB   80 DUP (?)
FILE_BUFF    DB   20000 DUP (?)
BYTES_READ   DW   ?
BAD_DOS      DB   'INCORRECT DOS VERSION - MUST BE 2.0 OR GREATER'
             DB   0DH,0AH,'$'
ERRMSG1      DB   'FILE NOT FOUND',0DH,0AH,'$'
ERRMSG2      DB   'ACCESS DENIED',0DH,0AH,'$'
ERRMSG3      DB   'READ ACCESS TO REQUESTED FILE NOT PERMITTED'
             DB   0DH,0AH,'$'
ERRMSG4      DB   'INVALID FILE HANDLE',0DH,0AH,'$'
ERRMSG5      DB   'PATH NOT FOUND',0DH,0AH,'$'
ERRMSG6      DB   'TOO MANY FILES ARE OPEN',0DH,0AH,'$'
ERRMSG7      DB   'WRITE TO SPECIFIED FILE NOT PERMITTED'
             DB   0DH,0AH,'$'
FILEMSG      DB   'PLEASE ENTER DRIVE, PATH, AND FILENAME:  ','$'
;
ENTER:
   PUSH   AX
   PUSH   BX
   PUSH   CX
   PUSH   DX
   PUSH   SI
   PUSH   DI
   MOV    AX,CS
   MOV    DS,AX
   MOV    ES,AX
   CLC
   CALL   CHECK_DOS
   JNC    DOS_OK
   MOV    DX,OFFSET BAD_DOS
   CALL   PRINTMESS
   JMP    EXIT
DOS_OK:
   MOV    SI,80H
   MOV    DI,OFFSET ASCIIZ
   XOR    CX,CX
   MOV    CL,[SI]
   CMP    CL,0
   JNZ    YES_FILE
   MOV    DX,OFFSET FILEMSG
   CALL   PRINTMESS
   MOV    DX,OFFSET KEY_BUFF
   MOV    AH,0AH
   INT    21H
   CALL   CRLF
   INC    DX
   MOV    BX,DX
   ADD    DL,BYTE PTR [BX]
   ADC    DX,0
   INC    DX
   MOV    BX,DX
   MOV    BYTE PTR [BX],0
   JMP    PROCESS_FILE
YES_FILE:
   DEC    CL
   ADD    SI,2
   CLD
   REP   MOVSB
   MOV   BYTE PTR [DI],0
PROCESS_FILE:
   CLC
   MOV   AL,2
   CALL  OPEN_FILE
   MOV   BX,AX
    JC   EXIT
READIT:
   CLC
   CALL  READ_FILE
   JC    EXIT
   CLC
   CALL  STRIP_BITS
   CLC
   MOV   AL,1        ; Seek to beginning of block read
   MOV   DX,BYTES_READ
   NEG   DX          ; Make negative for negative offset
   XOR   CX,CX
   DEC   CX
   CALL  FILESEEK
   JC    EXIT
   CLC
   CALL  WRITE_FILE
   JC    EXIT
   CMP   BYTES_READ,20000
   JNE   EXIT             ; No more left to read
   JMP   READIT
EXIT:
   CALL  CLOSE_FILE
   POP   DI
   POP   SI
   POP   DX
   POP   CX
   POP   BX
   POP   AX
   INT   20H
STRIP    ENDP
;-------------------------------------------
CHECK_DOS PROC NEAR
   PUSH  AX
   MOV   AH,30H
   INT   21H
   CMP   AL,2
   POP   AX
   RET
CHECK_DOS ENDP
;--------------------------------------------
OPEN_FILE PROC   NEAR
   PUSH  DX
   MOV   AH,3DH
   MOV   DX,OFFSET ASCIIZ
   INT   21H
   JNC   LEAVE
   CMP   AL,2
   JNZ   CHECK_PATH
   MOV   DX,OFFSET ERRMSG1
   CALL  PRINTMESS
   STC
   JMP   LEAVE
CHECK_PATH:
   CMP   AL,3
   JNZ   CHECK_FILES
   MOV   DX,OFFSET ERRMSG5
   CALL  PRINTMESS
   STC
   JMP   LEAVE
CHECK_FILES:
   CMP   AL,4
   JNZ   ACCESS_ERR
   MOV   DX,OFFSET ERRMSG6
   CALL  PRINTMESS
   STC
   JMP   LEAVE
ACCESS_ERR:
   CMP   AL,5
   JNZ   BAD_CODE
   MOV   DX,OFFSET ERRMSG2
   CALL  PRINTMESS
   STC
   JMP   LEAVE
BAD_CODE:
   MOV   DX,OFFSET ERRMSG3
   CALL  PRINTMESS
   STC
LEAVE:
   POP   DX
   RET
OPEN_FILE ENDP
;-----------------------------------------
READ_FILE PROC   NEAR
   PUSH  AX
   PUSH  CX
   PUSH  DX
   MOV   CX,SIZE FILE_BUFF
   MOV   DX,OFFSET FILE_BUFF
   MOV   AH,3FH
   INT   21H
   JNC   GOOD_READ
   CMP   AL,5
   JNZ   BAD_HANDLE
   MOV   DX,OFFSET ERRMSG3
   CALL  PRINTMESS
   STC
   JMP   LEAVE_READ
BAD_HANDLE:
   MOV   DX,OFFSET ERRMSG4
   CALL  PRINTMESS
   STC
   JMP   LEAVE_READ
GOOD_READ:
   MOV   BYTES_READ,AX
LEAVE_READ:
   POP   DX
   POP   CX
   POP   AX
   RET
READ_FILE ENDP
;-------------------------------------------
CLOSE_FILE PROC   NEAR
   PUSH  AX
   PUSH  DX
   MOV   AH,3EH
   INT   21H
   JNC   LEAVE_CLOSE
   MOV   DX,OFFSET ERRMSG4
   CALL  PRINTMESS
   STC
LEAVE_CLOSE:
   POP   DX
   POP   AX
   RET
CLOSE_FILE ENDP
;-------------------------------------------
STRIP_BITS PROC NEAR
   PUSH   CX
   PUSH   BX
   MOV    BX,OFFSET FILE_BUFF
   MOV    CX,BYTES_READ
STRIPPER:
   AND    BYTE PTR [BX],7FH
   INC    BX
   LOOP   STRIPPER
   POP    BX
   POP    CX
   RET
STRIP_BITS ENDP
;-------------------------------------------
WRITE_FILE PROC   NEAR
   PUSH   AX
   PUSH   CX
   PUSH   DX
   MOV    AH,40H
   MOV    DX,OFFSET FILE_BUFF
   MOV    CX,BYTES_READ
   INT    21H
   JNC    LEAVE_WRITE
   CMP    AL,5
   JNZ    HANDLE_BAD
   MOV    DX,OFFSET ERRMSG7
   CALL   PRINTMESS
   STC
   JMP    LEAVE_WRITE
HANDLE_BAD:
   MOV    DX,OFFSET ERRMSG4
   CALL   PRINTMESS
   STC
LEAVE_WRITE:
   POP    DX
   POP    CX
   POP    AX
   RET
WRITE_FILE ENDP
;-------------------------------------------
FILESEEK PROC NEAR

; Expects file handle in BX, seek mode in AL
;    0 -- from beginning of file
;    1 -- from current offset
;    2 -- from end-of-file
; CX:DX offset to move file pointer

; Returns new offset in DX:AX
   MOV    AH,42H
   INT    21H
   RET
FILESEEK ENDP
;------------------------------------------------------
PRINTMESS PROC NEAR
   PUSH   AX
   MOV    AH,9
   INT    21H
   POP    AX
   RET
PRINTMESS ENDP
;------------------------------------------
CRLF PROC NEAR
   PUSH   AX
   PUSH   DX
   MOV    DL,0DH
   MOV    AH,2
   INT    21H
   MOV    DL,0AH
   MOV    AH,2
   INT    21H
   POP    DX
   POP    AX
   RET
CRLF ENDP
;------------------------------------------
CODESEG ENDS
;********************************************
   END START