home *** CD-ROM | disk | FTP | other *** search
- These files replace the Voyetra / Sound Blaster SuperSAPI FM driver
- that is provided with the Sound Blaster Pro/16 installation diskettes.
- These files are intended only for use under Win-OS/2 provided in OS/2
- version 2.1. These drivers can be used by Windows 3.1 with the new
- OS/2 For Windows. These files should not be used under any other
- operating environment. (DOS/Windows 3.x, DOS, etc.)
-
- To install these drivers you must first start a full screen Win-OS/2
- session:
-
- 1. Go to the "Win-OS/2 Main" group and open the "Control Panel"
- 2. Open the "Drivers" icon.
-
- * First make sure that the "Voyetra / Sound Blaster SuperSAPI FM Driver"
- is not loaded in the list of drivers. If it is installed, REMOVE it,
- then shut down the Win-OS/2 session, restart it and continue to the
- next step.
-
- 3. Next, click on the "ADD" button and select "Unlisted or Updated
- Driver".
- 4. When you are requested to insert the disk with the unlisted or
- updated driver you should type the drive and path to where these
- files were extracted. (ie. "C:\TEMP")
-
- 5. If you are using a Sound Blaster Pro 1 (CT-1330) card you should
- install the "Sound Blaster Pro 1 MIDI Synthesizer" driver. If you
- are using a Sound Blaster Pro 2 (CT-1600) "Sound Blaster Pro 2
- MIDI Synthesizer" driver. If you are using a Sound Blaster 16
- (CT-1730, CT-1740, CT-1750, CT-1759, CT-1770, or CT-1779) you
- should install the "Sound Blaster 16 MIDI Synthesizer" driver.
-