home *** CD-ROM | disk | FTP | other *** search
- /* More subroutines needed by GCC output code on some machines. */
- /* Compile this one with gcc. */
- /* Copyright (C) 1989, 1992 Free Software Foundation, Inc.
-
- This file is part of GNU CC.
-
- GNU CC is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
- any later version.
-
- GNU CC is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with GNU CC; see the file COPYING. If not, write to
- the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */
-
- /* As a special exception, if you link this library with files
- compiled with GCC to produce an executable, this does not cause
- the resulting executable to be covered by the GNU General Public License.
- This exception does not however invalidate any other reasons why
- the executable file might be covered by the GNU General Public License. */
-
- /* It is incorrect to include config.h here, because this file is being
- compiled for the target, and hence definitions concerning only the host
- do not apply. */
-
- #if 0
- #include "tm.h"
- #include "gstddef.h"
- #else
- #include "types.h"
- #include <stddef.h>
- #endif
-
- /* Thu Sep 23 18:57:26 1993 GM: */ #include "config.h"
-
- /* Don't use `fancy_abort' here even if config.h says to use it. */
- #ifdef abort
- #undef abort
- #endif
-
- /* Need to undef this because LONG_TYPE_SIZE may rely upon GCC's
- internal `target_flags' variable. */
- #undef LONG_TYPE_SIZE
-
- #define LONG_TYPE_SIZE (sizeof (long) * BITS_PER_UNIT)
-
- #ifndef SItype
- #define SItype long int
- #endif
-
- /* long long ints are pairs of long ints in the order determined by
- WORDS_BIG_ENDIAN. */
-
- #if WORDS_BIG_ENDIAN
- struct longlong {long high, low;};
- #else
- struct longlong {long low, high;};
- #endif
-
- /* We need this union to unpack/pack longlongs, since we don't have
- any arithmetic yet. Incoming long long parameters are stored
- into the `ll' field, and the unpacked result is read from the struct
- longlong. */
-
- typedef union
- {
- struct longlong s;
- long long ll;
- } long_long;
-
- #if defined (L_udivmoddi4) || defined (L_muldi3)
-
- #include "longlong.h"
-
- #endif /* udiv or mul */
-
- extern long long __fixunssfdi (float a);
- extern long long __fixunsdfdi (double a);
-
- #if defined (L_negdi2) || defined (L_divdi3) || defined (L_moddi3)
- #if defined (L_divdi3) || defined (L_moddi3)
- static inline
- #endif
- long long
- __negdi2 (u)
- long long u;
- {
- long_long w;
- long_long uu;
-
- uu.ll = u;
-
- w.s.low = -uu.s.low;
- w.s.high = -uu.s.high - ((unsigned long) w.s.low > 0);
-
- return w.ll;
- }
- #endif
-
- #ifdef L_lshldi3
- long long
- __lshldi3 (u, b)
- long long u;
- int b;
- {
- long_long w;
- long bm;
- long_long uu;
-
- if (b == 0)
- return u;
-
- uu.ll = u;
-
- bm = (sizeof (long) * BITS_PER_UNIT) - b;
- if (bm <= 0)
- {
- w.s.low = 0;
- w.s.high = (unsigned long)uu.s.low << -bm;
- }
- else
- {
- unsigned long carries = (unsigned long)uu.s.low >> bm;
- w.s.low = (unsigned long)uu.s.low << b;
- w.s.high = ((unsigned long)uu.s.high << b) | carries;
- }
-
- return w.ll;
- }
- #endif
-
- #ifdef L_lshrdi3
- long long
- __lshrdi3 (u, b)
- long long u;
- int b;
- {
- long_long w;
- long bm;
- long_long uu;
-
- if (b == 0)
- return u;
-
- uu.ll = u;
-
- bm = (sizeof (long) * BITS_PER_UNIT) - b;
- if (bm <= 0)
- {
- w.s.high = 0;
- w.s.low = (unsigned long)uu.s.high >> -bm;
- }
- else
- {
- unsigned long carries = (unsigned long)uu.s.high << bm;
- w.s.high = (unsigned long)uu.s.high >> b;
- w.s.low = ((unsigned long)uu.s.low >> b) | carries;
- }
-
- return w.ll;
- }
- #endif
-
- #ifdef L_ashldi3
- long long
- __ashldi3 (u, b)
- long long u;
- int b;
- {
- long_long w;
- long bm;
- long_long uu;
-
- if (b == 0)
- return u;
-
- uu.ll = u;
-
- bm = (sizeof (long) * BITS_PER_UNIT) - b;
- if (bm <= 0)
- {
- w.s.low = 0;
- w.s.high = (unsigned long)uu.s.low << -bm;
- }
- else
- {
- unsigned long carries = (unsigned long)uu.s.low >> bm;
- w.s.low = (unsigned long)uu.s.low << b;
- w.s.high = ((unsigned long)uu.s.high << b) | carries;
- }
-
- return w.ll;
- }
- #endif
-
- #ifdef L_ashrdi3
- long long
- __ashrdi3 (u, b)
- long long u;
- int b;
- {
- long_long w;
- long bm;
- long_long uu;
-
- if (b == 0)
- return u;
-
- uu.ll = u;
-
- bm = (sizeof (long) * BITS_PER_UNIT) - b;
- if (bm <= 0)
- {
- /* w.s.high = 1..1 or 0..0 */
- w.s.high = uu.s.high >> (sizeof (long) * BITS_PER_UNIT - 1);
- w.s.low = uu.s.high >> -bm;
- }
- else
- {
- unsigned long carries = (unsigned long)uu.s.high << bm;
- w.s.high = uu.s.high >> b;
- w.s.low = ((unsigned long)uu.s.low >> b) | carries;
- }
-
- return w.ll;
- }
- #endif
-
- #ifdef L_muldi3
- long long
- __muldi3 (u, v)
- long long u, v;
- {
- long_long w;
- long_long uu, vv;
-
- uu.ll = u,
- vv.ll = v;
-
- w.ll = __umulsidi3 (uu.s.low, vv.s.low);
- w.s.high += ((unsigned long) uu.s.low * (unsigned long) vv.s.high
- + (unsigned long) uu.s.high * (unsigned long) vv.s.low);
-
- return w.ll;
- }
- #endif
-
- #ifdef L_udivmoddi4
- static const unsigned char __clz_tab[] =
- {
- 0,1,2,2,3,3,3,3,4,4,4,4,4,4,4,4,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,
- 6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,
- 7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,
- 7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,
- 8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,
- 8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,
- 8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,
- 8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,
- };
-
- unsigned long long
- __udivmoddi4 (n, d, rp)
- unsigned long long n, d;
- unsigned long long int *rp;
- {
- long_long ww;
- long_long nn, dd;
- long_long rr;
- unsigned long d0, d1, n0, n1, n2;
- unsigned long q0, q1;
- unsigned b, bm;
-
- nn.ll = n;
- dd.ll = d;
-
- d0 = dd.s.low;
- d1 = dd.s.high;
- n0 = nn.s.low;
- n1 = nn.s.high;
-
- #if !UDIV_NEEDS_NORMALIZATION
- if (d1 == 0)
- {
- if (d0 > n1)
- {
- /* 0q = nn / 0D */
-
- udiv_qrnnd (q0, n0, n1, n0, d0);
- q1 = 0;
-
- /* Remainder in n0. */
- }
- else
- {
- /* qq = NN / 0d */
-
- if (d0 == 0)
- d0 = 1 / d0; /* Divide intentionally by zero. */
-
- udiv_qrnnd (q1, n1, 0, n1, d0);
- udiv_qrnnd (q0, n0, n1, n0, d0);
-
- /* Remainder in n0. */
- }
-
- if (rp != 0)
- {
- rr.s.low = n0;
- rr.s.high = 0;
- *rp = rr.ll;
- }
- }
-
- #else /* UDIV_NEEDS_NORMALIZATION */
-
- if (d1 == 0)
- {
- if (d0 > n1)
- {
- /* 0q = nn / 0D */
-
- count_leading_zeros (bm, d0);
-
- if (bm != 0)
- {
- /* Normalize, i.e. make the most significant bit of the
- denominator set. */
-
- d0 = d0 << bm;
- n1 = (n1 << bm) | (n0 >> (LONG_TYPE_SIZE - bm));
- n0 = n0 << bm;
- }
-
- udiv_qrnnd (q0, n0, n1, n0, d0);
- q1 = 0;
-
- /* Remainder in n0 >> bm. */
- }
- else
- {
- /* qq = NN / 0d */
-
- if (d0 == 0)
- d0 = 1 / d0; /* Divide intentionally by zero. */
-
- count_leading_zeros (bm, d0);
-
- if (bm == 0)
- {
- /* From (n1 >= d0) /\ (the most significant bit of d0 is set),
- conclude (the most significant bit of n1 is set) /\ (the
- leading quotient digit q1 = 1).
-
- This special case is necessary, not an optimization.
- (Shifts counts of LONG_TYPE_SIZE are undefined.) */
-
- n1 -= d0;
- q1 = 1;
- }
- else
- {
- /* Normalize. */
-
- b = LONG_TYPE_SIZE - bm;
-
- d0 = d0 << bm;
- n2 = n1 >> b;
- n1 = (n1 << bm) | (n0 >> b);
- n0 = n0 << bm;
-
- udiv_qrnnd (q1, n1, n2, n1, d0);
- }
-
- /* n1 != d0... */
-
- udiv_qrnnd (q0, n0, n1, n0, d0);
-
- /* Remainder in n0 >> bm. */
- }
-
- if (rp != 0)
- {
- rr.s.low = n0 >> bm;
- rr.s.high = 0;
- *rp = rr.ll;
- }
- }
- #endif /* UDIV_NEEDS_NORMALIZATION */
-
- else
- {
- if (d1 > n1)
- {
- /* 00 = nn / DD */
-
- q0 = 0;
- q1 = 0;
-
- /* Remainder in n1n0. */
- if (rp != 0)
- {
- rr.s.low = n0;
- rr.s.high = n1;
- *rp = rr.ll;
- }
- }
- else
- {
- /* 0q = NN / dd */
-
- count_leading_zeros (bm, d1);
- if (bm == 0)
- {
- /* From (n1 >= d1) /\ (the most significant bit of d1 is set),
- conclude (the most significant bit of n1 is set) /\ (the
- quotient digit q0 = 0 or 1).
-
- This special case is necessary, not an optimization. */
-
- /* The condition on the next line takes advantage of that
- n1 >= d1 (true due to program flow). */
- if (n1 > d1 || n0 >= d0)
- {
- q0 = 1;
- sub_ddmmss (n1, n0, n1, n0, d1, d0);
- }
- else
- q0 = 0;
-
- q1 = 0;
-
- if (rp != 0)
- {
- rr.s.low = n0;
- rr.s.high = n1;
- *rp = rr.ll;
- }
- }
- else
- {
- unsigned long m1, m0;
- /* Normalize. */
-
- b = LONG_TYPE_SIZE - bm;
-
- d1 = (d1 << bm) | (d0 >> b);
- d0 = d0 << bm;
- n2 = n1 >> b;
- n1 = (n1 << bm) | (n0 >> b);
- n0 = n0 << bm;
-
- udiv_qrnnd (q0, n1, n2, n1, d1);
- umul_ppmm (m1, m0, q0, d0);
-
- if (m1 > n1 || (m1 == n1 && m0 > n0))
- {
- q0--;
- sub_ddmmss (m1, m0, m1, m0, d1, d0);
- }
-
- q1 = 0;
-
- /* Remainder in (n1n0 - m1m0) >> bm. */
- if (rp != 0)
- {
- sub_ddmmss (n1, n0, n1, n0, m1, m0);
- rr.s.low = (n1 << b) | (n0 >> bm);
- rr.s.high = n1 >> bm;
- *rp = rr.ll;
- }
- }
- }
- }
-
- ww.s.low = q0;
- ww.s.high = q1;
- return ww.ll;
- }
- #endif
-
- #ifdef L_divdi3
- unsigned long long __udivmoddi4 ();
- long long
- __divdi3 (u, v)
- long long u, v;
- {
- int c = 0;
- long_long uu, vv;
- long long w;
-
- uu.ll = u;
- vv.ll = v;
-
- if (uu.s.high < 0)
- c = ~c,
- uu.ll = __negdi2 (uu.ll);
- if (vv.s.high < 0)
- c = ~c,
- vv.ll = __negdi2 (vv.ll);
-
- w = __udivmoddi4 (uu.ll, vv.ll, (unsigned long long *) 0);
- if (c)
- w = __negdi2 (w);
-
- return w;
- }
- #endif
-
- #ifdef L_moddi3
- unsigned long long __udivmoddi4 ();
- long long
- __moddi3 (u, v)
- long long u, v;
- {
- int c = 0;
- long_long uu, vv;
- long long w;
-
- uu.ll = u;
- vv.ll = v;
-
- if (uu.s.high < 0)
- c = ~c,
- uu.ll = __negdi2 (uu.ll);
- if (vv.s.high < 0)
- vv.ll = __negdi2 (vv.ll);
-
- (void) __udivmoddi4 (uu.ll, vv.ll, &w);
- if (c)
- w = __negdi2 (w);
-
- return w;
- }
- #endif
-
- #ifdef L_umoddi3
- unsigned long long __udivmoddi4 ();
- unsigned long long
- __umoddi3 (u, v)
- unsigned long long u, v;
- {
- long long w;
-
- (void) __udivmoddi4 (u, v, &w);
-
- return w;
- }
- #endif
-
- #ifdef L_udivdi3
- unsigned long long __udivmoddi4 ();
- unsigned long long
- __udivdi3 (n, d)
- unsigned long long n, d;
- {
- return __udivmoddi4 (n, d, (unsigned long long *) 0);
- }
- #endif
-
- #ifdef L_cmpdi2
- SItype
- __cmpdi2 (a, b)
- long long a, b;
- {
- long_long au, bu;
-
- au.ll = a, bu.ll = b;
-
- if (au.s.high < bu.s.high)
- return 0;
- else if (au.s.high > bu.s.high)
- return 2;
- if ((unsigned long) au.s.low < (unsigned long) bu.s.low)
- return 0;
- else if ((unsigned long) au.s.low > (unsigned long) bu.s.low)
- return 2;
- return 1;
- }
- #endif
-
- #ifdef L_ucmpdi2
- SItype
- __ucmpdi2 (a, b)
- long long a, b;
- {
- long_long au, bu;
-
- au.ll = a, bu.ll = b;
-
- if ((unsigned long) au.s.high < (unsigned long) bu.s.high)
- return 0;
- else if ((unsigned long) au.s.high > (unsigned long) bu.s.high)
- return 2;
- if ((unsigned long) au.s.low < (unsigned long) bu.s.low)
- return 0;
- else if ((unsigned long) au.s.low > (unsigned long) bu.s.low)
- return 2;
- return 1;
- }
- #endif
-
- #ifdef L_fixunsdfdi
- #define WORD_SIZE (sizeof (long) * BITS_PER_UNIT)
- #define HIGH_WORD_COEFF (((long long) 1) << WORD_SIZE)
-
- long long
- __fixunsdfdi (a)
- double a;
- {
- double b;
- unsigned long long v;
-
- if (a < 0)
- return 0;
-
- /* Compute high word of result, as a flonum. */
- b = (a / HIGH_WORD_COEFF);
- /* Convert that to fixed (but not to long long!),
- and shift it into the high word. */
- v = (unsigned long int) b;
- v <<= WORD_SIZE;
- /* Remove high part from the double, leaving the low part as flonum. */
- a -= (double)v;
- /* Convert that to fixed (but not to long long!) and add it in.
- Sometimes A comes out negative. This is significant, since
- A has more bits than a long int does. */
- if (a < 0)
- v -= (unsigned long int) (- a);
- else
- v += (unsigned long int) a;
- return v;
- }
- #endif
-
- #ifdef L_fixdfdi
- long long
- __fixdfdi (a)
- double a;
- {
- if (a < 0)
- return - __fixunsdfdi (-a);
- return __fixunsdfdi (a);
- }
- #endif
-
- #ifdef L_fixunssfdi
- #define WORD_SIZE (sizeof (long) * BITS_PER_UNIT)
- #define HIGH_WORD_COEFF (((long long) 1) << WORD_SIZE)
-
- long long
- __fixunssfdi (float original_a)
- {
- /* Convert the float to a double, because that is surely not going
- to lose any bits. Some day someone else can write a faster version
- that avoids converting to double, and verify it really works right. */
- double a = original_a;
- double b;
- unsigned long long v;
-
- if (a < 0)
- return 0;
-
- /* Compute high word of result, as a flonum. */
- b = (a / HIGH_WORD_COEFF);
- /* Convert that to fixed (but not to long long!),
- and shift it into the high word. */
- v = (unsigned long int) b;
- v <<= WORD_SIZE;
- /* Remove high part from the double, leaving the low part as flonum. */
- a -= (double)v;
- /* Convert that to fixed (but not to long long!) and add it in.
- Sometimes A comes out negative. This is significant, since
- A has more bits than a long int does. */
- if (a < 0)
- v -= (unsigned long int) (- a);
- else
- v += (unsigned long int) a;
- return v;
- }
- #endif
-
- #ifdef L_fixsfdi
- long long
- __fixsfdi (float a)
- {
- if (a < 0)
- return - __fixunssfdi (-a);
- return __fixunssfdi (a);
- }
- #endif
-
- #ifdef L_floatdidf
- #define WORD_SIZE (sizeof (long) * BITS_PER_UNIT)
- #define HIGH_HALFWORD_COEFF (((long long) 1) << (WORD_SIZE / 2))
- #define HIGH_WORD_COEFF (((long long) 1) << WORD_SIZE)
-
- double
- __floatdidf (u)
- long long u;
- {
- double d;
- int negate = 0;
-
- if (u < 0)
- u = -u, negate = 1;
-
- d = (unsigned int) (u >> WORD_SIZE);
- d *= HIGH_HALFWORD_COEFF;
- d *= HIGH_HALFWORD_COEFF;
- d += (unsigned int) (u & (HIGH_WORD_COEFF - 1));
-
- return (negate ? -d : d);
- }
- #endif
-
- #ifdef L_floatdisf
- #define WORD_SIZE (sizeof (long) * BITS_PER_UNIT)
- #define HIGH_HALFWORD_COEFF (((long long) 1) << (WORD_SIZE / 2))
- #define HIGH_WORD_COEFF (((long long) 1) << WORD_SIZE)
-
- float
- __floatdisf (u)
- long long u;
- {
- float f;
- int negate = 0;
-
- if (u < 0)
- u = -u, negate = 1;
-
- f = (unsigned int) (u >> WORD_SIZE);
- f *= HIGH_HALFWORD_COEFF;
- f *= HIGH_HALFWORD_COEFF;
- f += (unsigned int) (u & (HIGH_WORD_COEFF - 1));
-
- return (negate ? -f : f);
- }
- #endif
-
- #ifdef L_fixunsdfsi
- #include "limits.h"
-
- unsigned SItype
- __fixunsdfsi (a)
- double a;
- {
- if (a >= - (double) LONG_MIN)
- return (SItype) (a + LONG_MIN) - LONG_MIN;
- return (SItype) a;
- }
- #endif
-
- #ifdef L_fixunssfsi
- #include "limits.h"
-
- unsigned SItype
- __fixunssfsi (float a)
- {
- if (a >= - (float) LONG_MIN)
- return (SItype) (a + LONG_MIN) - LONG_MIN;
- return (SItype) a;
- }
- #endif
-
- #ifdef L_varargs
- #ifdef __i860__
- #ifdef SVR4
- asm (" .text");
- asm (" .align 4");
-
- asm (".globl __builtin_saveregs");
- asm ("__builtin_saveregs:");
- asm (" andnot 0x0f,%sp,%sp"); /* round down to 16-byte boundary */
- asm (" adds -96,%sp,%sp"); /* allocate stack space for reg save
- area and also for a new va_list
- structure */
- /* Save all argument registers in the arg reg save area. The
- arg reg save area must have the following layout (according
- to the svr4 ABI):
-
- struct {
- union {
- float freg[8];
- double dreg[4];
- } float_regs;
- long ireg[12];
- };
- */
-
- asm (" fst.q %f8, 0(%sp)"); /* save floating regs (f8-f15) */
- asm (" fst.q %f12,16(%sp)");
-
- asm (" st.l %r16,32(%sp)"); /* save integer regs (r16-r27) */
- asm (" st.l %r17,36(%sp)");
- asm (" st.l %r18,40(%sp)");
- asm (" st.l %r19,44(%sp)");
- asm (" st.l %r20,48(%sp)");
- asm (" st.l %r21,52(%sp)");
- asm (" st.l %r22,56(%sp)");
- asm (" st.l %r23,60(%sp)");
- asm (" st.l %r24,64(%sp)");
- asm (" st.l %r25,68(%sp)");
- asm (" st.l %r26,72(%sp)");
- asm (" st.l %r27,76(%sp)");
-
- asm (" adds 80,%sp,%r16"); /* compute the address of the new
- va_list structure. Put in into
- r16 so that it will be returned
- to the caller. */
-
- /* Initialize all fields of the new va_list structure. This
- structure looks like:
-
- typedef struct {
- unsigned long ireg_used;
- unsigned long freg_used;
- long *reg_base;
- long *mem_ptr;
- } va_list;
- */
-
- asm (" st.l %r0, 0(%r16)"); /* nfixed */
- asm (" st.l %r0, 4(%r16)"); /* nfloating */
- asm (" st.l %sp, 8(%r16)"); /* __va_ctl points to __va_struct. */
- asm (" bri %r1"); /* delayed return */
- asm (" st.l %r28,12(%r16)"); /* pointer to overflow args */
-
- #else /* not SVR4 */
- asm (" .text");
- asm (" .align 4");
-
- asm (".globl ___builtin_saveregs");
- asm ("___builtin_saveregs:");
- asm (" mov sp,r30");
- asm (" andnot 0x0f,sp,sp");
- asm (" adds -96,sp,sp"); /* allocate sufficient space on the stack */
-
- /* Fill in the __va_struct. */
- asm (" st.l r16, 0(sp)"); /* save integer regs (r16-r27) */
- asm (" st.l r17, 4(sp)"); /* int fixed[12] */
- asm (" st.l r18, 8(sp)");
- asm (" st.l r19,12(sp)");
- asm (" st.l r20,16(sp)");
- asm (" st.l r21,20(sp)");
- asm (" st.l r22,24(sp)");
- asm (" st.l r23,28(sp)");
- asm (" st.l r24,32(sp)");
- asm (" st.l r25,36(sp)");
- asm (" st.l r26,40(sp)");
- asm (" st.l r27,44(sp)");
-
- asm (" fst.q f8, 48(sp)"); /* save floating regs (f8-f15) */
- asm (" fst.q f12,64(sp)"); /* int floating[8] */
-
- /* Fill in the __va_ctl. */
- asm (" st.l sp, 80(sp)"); /* __va_ctl points to __va_struct. */
- asm (" st.l r28,84(sp)"); /* pointer to more args */
- asm (" st.l r0, 88(sp)"); /* nfixed */
- asm (" st.l r0, 92(sp)"); /* nfloating */
-
- asm (" adds 80,sp,r16"); /* return address of the __va_ctl. */
- asm (" bri r1");
- asm (" mov r30,sp");
- /* recover stack and pass address to start
- of data. */
- #endif /* not SVR4 */
- #else /* not __i860__ */
- #ifdef __sparc__
- asm (".global ___builtin_saveregs");
- asm ("___builtin_saveregs:");
- asm ("st %i0,[%fp+68]");
- asm ("st %i1,[%fp+72]");
- asm ("st %i2,[%fp+76]");
- asm ("st %i3,[%fp+80]");
- asm ("st %i4,[%fp+84]");
- asm ("retl");
- asm ("st %i5,[%fp+88]");
- #else /* not __sparc__ */
- #if defined(__MIPSEL__) | defined(__R3000__) | defined(__R2000__) | defined(__mips__)
-
- asm (" .text");
- asm (" .ent __builtin_saveregs");
- asm (" .globl __builtin_saveregs");
- asm ("__builtin_saveregs:");
- asm (" sw $4,0($30)");
- asm (" sw $5,4($30)");
- asm (" sw $6,8($30)");
- asm (" sw $7,12($30)");
- asm (" j $31");
- asm (" .end __builtin_saveregs");
- #else /* not __mips__, etc. */
- __builtin_saveregs ()
- {
- abort ();
- }
- #endif /* not __mips__ */
- #endif /* not __sparc__ */
- #endif /* not __i860__ */
- #endif
-
- #ifdef L_eprintf
- #undef NULL /* Avoid errors if stdio.h and our stddef.h mismatch. */
- #include <stdio.h>
- /* This is used by the `assert' macro. */
- void
- __eprintf (string, expression, line, filename)
- char *string;
- char *expression;
- int line;
- char *filename;
- {
- fprintf (stderr, string, expression, line, filename);
- fflush (stderr);
- abort ();
- }
- #endif
-
- #ifdef L_bb
- /* Avoid warning from ranlib about empty object file. */
- void
- __bb_avoid_warning ()
- {}
-
- #if defined (__sun__) && defined (__mc68000__)
- struct bb
- {
- int initialized;
- char *filename;
- int *counts;
- int ncounts;
- int zero_word;
- int *addresses;
- };
-
- extern int ___tcov_init;
-
- __bb_init_func (blocks)
- struct bb *blocks;
- {
- if (! ___tcov_init)
- ___tcov_init_func ();
-
- ___bb_link (blocks->filename, blocks->counts, blocks->ncounts);
- }
-
- #endif
- #endif
-
- /* frills for C++ */
-
- #ifdef L_builtin_new
- typedef void (*vfp)(void);
-
- extern vfp __new_handler;
-
- void *
- __builtin_new (sz)
- long sz;
- {
- void *p;
-
- p = (void *) malloc (sz);
- if (p == 0)
- (*__new_handler) ();
- return p;
- }
- #endif
-
- #ifdef L_builtin_New
- typedef void (*vfp)(void);
-
- static void default_new_handler ();
-
- vfp __new_handler = default_new_handler;
-
- void *
- __builtin_vec_new (p, maxindex, size, ctor)
- void *p;
- int maxindex, size;
- void (*ctor)(void *);
- {
- int i, nelts = maxindex + 1;
- void *rval;
-
- if (p == 0)
- p = (void *)__builtin_new (nelts * size);
-
- rval = p;
-
- for (i = 0; i < nelts; i++)
- {
- (*ctor) (p);
- p += size;
- }
-
- return rval;
- }
-
- vfp
- __set_new_handler (handler)
- vfp handler;
- {
- vfp prev_handler;
-
- prev_handler = __new_handler;
- if (handler == 0) handler = default_new_handler;
- __new_handler = handler;
- return prev_handler;
- }
-
- vfp
- set_new_handler (handler)
- vfp handler;
- {
- return __set_new_handler (handler);
- }
-
- static void
- default_new_handler ()
- {
- /* don't use fprintf (stderr, ...) because it may need to call malloc. */
- /* This should really print the name of the program, but that is hard to
- do. We need a standard, clean way to get at the name. */
- write (2, "Virtual memory exceeded in `new'\n", 33);
- /* don't call exit () because that may call global destructors which
- may cause a loop. */
- _exit (-1);
- }
- #endif
-
- #ifdef L_builtin_del
- typedef void (*vfp)(void);
-
- void
- __builtin_delete (ptr)
- void *ptr;
- {
- if (ptr)
- free (ptr);
- }
-
- void
- __builtin_vec_delete (ptr, maxindex, size, dtor, auto_delete_vec, auto_delete)
- void *ptr;
- int maxindex, size;
- void (*dtor)();
- int auto_delete;
- {
- int i, nelts = maxindex + 1;
- void *p = ptr;
-
- ptr += nelts * size;
-
- for (i = 0; i < nelts; i++)
- {
- ptr -= size;
- (*dtor) (ptr, auto_delete);
- }
-
- if (auto_delete_vec)
- __builtin_delete (p);
- }
-
- #endif
-
- #ifdef L_shtab
- unsigned int __shtab[] = {
- 0x00000001, 0x00000002, 0x00000004, 0x00000008,
- 0x00000010, 0x00000020, 0x00000040, 0x00000080,
- 0x00000100, 0x00000200, 0x00000400, 0x00000800,
- 0x00001000, 0x00002000, 0x00004000, 0x00008000,
- 0x00010000, 0x00020000, 0x00040000, 0x00080000,
- 0x00100000, 0x00200000, 0x00400000, 0x00800000,
- 0x01000000, 0x02000000, 0x04000000, 0x08000000,
- 0x10000000, 0x20000000, 0x40000000, 0x80000000
- };
- #endif
-
- #ifdef L_clear_cache
- /* Clear part of an instruction cache. */
-
- #define INSN_CACHE_PLANE_SIZE (INSN_CACHE_SIZE / INSN_CACHE_DEPTH)
-
- void
- __clear_cache (beg, end)
- char *beg, *end;
- {
- #ifdef INSN_CACHE_SIZE
- static char array[INSN_CACHE_SIZE + INSN_CACHE_PLANE_SIZE + INSN_CACHE_LINE_WIDTH];
- static int initialized = 0;
- int offset;
- unsigned int start_addr, end_addr;
- typedef (*function_ptr) ();
-
- #if (INSN_CACHE_SIZE / INSN_CACHE_LINE_WIDTH) < 16
- /* It's cheaper to clear the whole cache.
- Put in a series of jump instructions so that calling the beginning
- of the cache will clear the whole thing. */
-
- if (! initialized)
- {
- int ptr = (((int) array + INSN_CACHE_LINE_WIDTH - 1)
- & -INSN_CACHE_LINE_WIDTH);
- int end_ptr = ptr + INSN_CACHE_SIZE;
-
- while (ptr < end_ptr)
- {
- *(INSTRUCTION_TYPE *)ptr
- = JUMP_AHEAD_INSTRUCTION + INSN_CACHE_LINE_WIDTH;
- ptr += INSN_CACHE_LINE_WIDTH;
- }
- *(INSTRUCTION_TYPE *)(ptr - INSN_CACHE_LINE_WIDTH) = RETURN_INSTRUCTION;
-
- initialized = 1;
- }
-
- /* Call the beginning of the sequence. */
- (((function_ptr) (((int) array + INSN_CACHE_LINE_WIDTH - 1)
- & -INSN_CACHE_LINE_WIDTH))
- ());
-
- #else /* Cache is large. */
-
- if (! initialized)
- {
- int ptr = (((int) array + INSN_CACHE_LINE_WIDTH - 1)
- & -INSN_CACHE_LINE_WIDTH);
-
- while (ptr < (int) array + sizeof array)
- {
- *(INSTRUCTION_TYPE *)ptr = RETURN_INSTRUCTION;
- ptr += INSN_CACHE_LINE_WIDTH;
- }
-
- initialized = 1;
- }
-
- /* Find the location in array that occupies the same cache line as BEG. */
-
- offset = ((int) beg & -INSN_CACHE_LINE_WIDTH) & (INSN_CACHE_PLANE_SIZE - 1);
- start_addr = (((int) (array + INSN_CACHE_PLANE_SIZE - 1)
- & -INSN_CACHE_PLANE_SIZE)
- + offset);
-
- /* Compute the cache alignment of the place to stop clearing. */
- #if 0 /* This is not needed for gcc's purposes. */
- /* If the block to clear is bigger than a cache plane,
- we clear the entire cache, and OFFSET is already correct. */
- if (end < beg + INSN_CACHE_PLANE_SIZE)
- #endif
- offset = (((int) (end + INSN_CACHE_LINE_WIDTH - 1)
- & -INSN_CACHE_LINE_WIDTH)
- & (INSN_CACHE_PLANE_SIZE - 1));
-
- #if INSN_CACHE_DEPTH > 1
- end_addr = (start_addr & -INSN_CACHE_PLANE_SIZE) + offset;
- if (end_addr <= start_addr)
- end_addr += INSN_CACHE_PLANE_SIZE;
-
- for (plane = 0; plane < INSN_CACHE_DEPTH; plane++)
- {
- int addr = start_addr + plane * INSN_CACHE_PLANE_SIZE;
- int stop = end_addr + plane * INSN_CACHE_PLANE_SIZE;
-
- while (addr != stop)
- {
- /* Call the return instruction at ADDR. */
- ((function_ptr) addr) ();
-
- addr += INSN_CACHE_LINE_WIDTH;
- }
- }
- #else /* just one plane */
- do
- {
- /* Call the return instruction at START_ADDR. */
- ((function_ptr) start_addr) ();
-
- start_addr += INSN_CACHE_LINE_WIDTH;
- }
- while ((start_addr % INSN_CACHE_SIZE) != offset);
- #endif /* just one plane */
- #endif /* Cache is large */
- #endif /* Cache exists */
- }
-
- #endif /* L_clear_cache */
-
- #ifdef L_trampoline
-
- /* Jump to a trampoline, loading the static chain address. */
-
- #ifdef TRANSFER_FROM_TRAMPOLINE
- TRANSFER_FROM_TRAMPOLINE
- #endif
-
- #ifdef __convex__
-
- /* Make stack executable so we can call trampolines on stack.
- This is called from INITIALIZE_TRAMPOLINE in convex.h. */
-
- #include <sys/mman.h>
- #include <sys/vmparam.h>
- #include <machine/machparam.h>
-
- void
- __enable_execute_stack ()
- {
- int fp;
- static unsigned lowest = USRSTACK;
- unsigned current = (unsigned) &fp & -NBPG;
-
- if (lowest > current)
- {
- unsigned len = lowest - current;
- mremap (current, &len, PROT_READ | PROT_WRITE | PROT_EXEC, MAP_PRIVATE);
- lowest = current;
- }
-
- /* Clear instruction cache in case an old trampoline is in it. */
- asm ("pich");
- }
- #endif /* __convex__ */
- #endif /* L_trampoline */
-
- #ifdef L__main
-
- #include "gbl-ctors.h"
-
- /* Run all the global destructors on exit from the program. */
-
- void
- __do_global_dtors ()
- {
- #ifdef DO_GLOBAL_DTORS_BODY
- DO_GLOBAL_DTORS_BODY;
- #else
- int nptrs = *(int *)__DTOR_LIST__;
- int i;
-
- /* Some systems place the number of pointers
- in the first word of the table.
- On other systems, that word is -1.
- In all cases, the table is null-terminated. */
-
- /* If the length is not recorded, count up to the null. */
- if (nptrs == -1)
- for (nptrs = 0; __DTOR_LIST__[nptrs + 1] != 0; nptrs++);
-
- /* GNU LD format. */
- for (i = nptrs; i >= 1; i--)
- __DTOR_LIST__[i] ();
- #endif
- }
-
- #ifndef INIT_SECTION_ASM_OP
- /* Run all the global constructors on entry to the program. */
-
- #ifndef ON_EXIT
- #define ON_EXIT(a, b)
- #else
- /* Make sure the exit routine is pulled in to define the globals as
- bss symbols, just in case the linker does not automatically pull
- bss definitions from the library. */
-
- extern int _exit_dummy_decl;
- int *_exit_dummy_ref = &_exit_dummy_decl;
- #endif /* ON_EXIT */
-
- void
- __do_global_ctors ()
- {
- DO_GLOBAL_CTORS_BODY;
- ON_EXIT (__do_global_dtors, 0);
- }
-
- /* Subroutine called automatically by `main'.
- Compiling a global function named `main'
- produces an automatic call to this function at the beginning.
-
- For many systems, this routine calls __do_global_ctors.
- For systems which support a .init section we use the .init section
- to run __do_global_ctors, so we need not do anything here. */
-
- void
- __main ()
- {
- /* Support recursive calls to `main': run initializers just once. */
- static initialized = 0;
- if (! initialized)
- {
- initialized = 1;
- __do_global_ctors ();
- }
- }
- #endif /* no INIT_SECTION_ASM_OP */
-
- #endif /* L__main */
-
- #ifdef L_exit
-
- #include "gbl-ctors.h"
-
- /* Provide default definitions for the lists of constructors and
- destructors, so that we don't get linker errors. These symbols are
- intentionally bss symbols, so that gld and/or collect will provide
- the right values. */
-
- /* We declare the lists here with two elements each,
- so that they are valid empty lists if no other definition is loaded. */
- #ifndef INIT_SECTION_ASM_OP
- func_ptr __CTOR_LIST__[2];
- func_ptr __DTOR_LIST__[2];
- #endif /* INIT_SECTION_ASM_OP */
-
- #ifndef ON_EXIT
-
- /* If we have no known way of registering our own __do_global_dtors
- routine so that it will be invoked at program exit time, then we
- have to define our own exit routine which will get this to happen. */
-
- extern void __do_global_dtors ();
- extern void _cleanup ();
- extern void _exit ();
-
- void
- exit (status)
- int status;
- {
- __do_global_dtors ();
- #ifdef EXIT_BODY
- EXIT_BODY;
- #else
- _cleanup ();
- #endif
- _exit (status);
- }
-
- #else
- int _exit_dummy_decl = 0; /* prevent compiler & linker warnings */
- #endif
-
- #endif /* L_exit */
-
- /* In a.out systems, we need to have these dummy constructor and destructor
- lists in the library.
-
- When using `collect', the first link will resolve __CTOR_LIST__
- and __DTOR_LIST__ to these symbols. We will then run "nm" on the
- result, build the correct __CTOR_LIST__ and __DTOR_LIST__, and relink.
- Since we don't do the second link if no constructors existed, these
- dummies must be fully functional empty lists.
-
- When using `gnu ld', these symbols will be used if there are no
- constructors. If there are constructors, the N_SETV symbol defined
- by the linker from the N_SETT's in input files will define __CTOR_LIST__
- and __DTOR_LIST__ rather than its being allocated as common storage
- by the definitions below.
-
- When using a linker that supports constructor and destructor segments,
- these definitions will not be used, since crtbegin.o and crtend.o
- (from crtstuff.c) will have already defined __CTOR_LIST__ and
- __DTOR_LIST__. The crt*.o files are passed directly to the linker
- on its command line, by gcc. */
-
- /* The list needs two elements: one is ignored (the old count); the
- second is the terminating zero. Since both values are zero, this
- declaration is not initialized, and it becomes `common'. */
-
- #ifdef L_ctor_list
- #include "gbl-ctors.h"
- func_ptr __CTOR_LIST__[2];
- #endif
-
- #ifdef L_dtor_list
- #include "gbl-ctors.h"
- func_ptr __DTOR_LIST__[2];
- #endif
-