Amiga ISO Collection

home *** CD-ROM | disk | FTP | other *** search

/ Amiga ISO Collection / AmigaUtilCD1.iso / Printer / ST210.LHA / Studio_Update_V2.10b / README < prev

Wrap

Text File | 1996-01-08 | 25.5 KB | 542 lines

Studio V2.10b Update This disk will update all Studio versions to version 2.10b. The installation program on this disk will update your installed Studio software. It will not change your original Studio disks. However, you do need your original Studio disks for this update. The update avoids changing your settings without permission. So you can update and continue as usual. The software will be updated in place. It is recommended to make a backup of your system and Studio software before running this update. If you do have problems with the new software, you can always use your backup and don't forget to report the problems to Wolf Faust with all details. The installation program will check your installed Studio software automaticly and will update all installed software as far as available by this update. Not all changes done will be prompted to you. For instance, if you used the CanonBJC800 output module so far, it will be update quietly. While all printers will benefit from this update, most changes of this disk are mainly targeted at Deskjet 6xx and 8xx (xx means any number like 00, 50, 55, ...) and Canon BJC 610 users. This update comes with the latest software for these printers. Please note that not all parts of Studio V2.00 - V2.06 are updated. However, all major parts are updated. If you still think you are missing something, contact your distributor and ask for a complete set of V2.10b disks for a minor handling fee. So here is a list of the included new software: - Improved printing program and CMS tools. - New Workbench DeskDriver, DeskDriver4C and CanonBJ-EC software. - New output modules for the printing program: o Canon BJC 610 o Deskjet 6xx, 8xx, 1600 - New Deskjet 6xx, 8xx and Canon BJC 610 printer profiles for the printing program - Minor fixes to the output modules: o Fargo Primera (Greyscale printing fixed) o Canon BJC 800 (DIN A3/US Ledger printing fixed) o PCL_5C (some old PCL 5C printers had problems) ------------------------------------------------------------------ Here is the list of the latest Studio distributors: Germany: Australia & New Zealand Deutschland: GSoft Australia Pty Ltd. arXon GmbH PO Box 59 Assenheimer Str. 17 Elizabeth SA D-60489 Frankfurt Australia 5114 Germany Tel: 08-284-1266 Tel: 069-978410-26 Fax: 08-284-0922 Fax: 069-978410-30 (English Version) (German Version) The Netherlands: North America: MacroSystem NL Safe Harbor Computers Tromplaan 1 W226 N900 Eastmound Drive 3951 CL-Maarn Waukesha Tel: 03432-2969 WI 53186 023-296166 Tel: 414-548-8120 Fax: 03432-3103 Fax: 414-548-8130 (English Version) (English Version) United Kingdom: Belgium: HiSoft Click! b.v.b.a. The Old School, Greenfield Boomsesteenweg 468 Bedford MK45 5DE 2610 Wilrijk Tel: 0525-718181 Tel: 038281815 Fax: 0525-713716 Fax: 038286736 (English Version) (English Version) France: Spain: Phoenix-DP Almathera TU Amiga Ordinadors BP 801 C/Progreso No 6 Local3 64008 Pau Cedex 08120 La Liagosta Tel/Fax: 059829500 Barcelona Tel: (93) 560 3604 Fax: (93) 560 3607 ------------------------------------------------------------------ DESKJET NOTES Dear Deskjet 6xx/8xx (xx = 00, 60, 50, ...) user. WARNING: The current drivers are able to print 600*600dpi in greyscale mode. Please note that the printer is unable to print 600*600dpi in color mode. Don't try to print color in 600dpi mode (Density 2 or 6 with the 600x600 option set in DeskPref/DeskPref4c) or you might mess-up your printers output. The driver will automaticly print in SuperGrey mode when trying to print 600x600dpi. In order to print 600x600dpi, set the 600x600dpi gadget in DeskPref/DeskPref4C. This will double the print resolution from Density 1, 2 and 6. Use Density 2 or 6 for 600 dpi b/w printing. Deskjet 8xx users should NEVER use density 5 (600*300) dpi for printing. This mode is not supported by the Deskjet 8xx family and can currently only be used with the Deskjet 6xx family. Deskjet 6xx and Deskjet 8xx should always enable the 600x600 gadget in the DeskPref 4C preference program. This will enlarge the printable area for graphics. Please note that the printers do have an unprintable margin of roughly 1.5 cm (1.2 cm plus 3 mm tolerance because of mechanical reason). It also avoids printing offsets between different graphic pages. DeskPref4C offers two presets in the menu for Deskjet 6xx and 8xx users. "Set I" adjusts the driver for 300dpi greyscale printing and 300 dpi color using an Ordered dither method. "Set II" adjust the driver for 600 dpi greyscale printing (Ordered dither) and 300 dpi color using the slower Blue Noise dither. Simply try out wich one fits your needs (and paper!) best. Or make your own settings starting with one of these two presets. It is rarely known that the Deskjet 8xx printers offer an enhanced mode for printing color images. This mode is a major improvement to other Deskjet's currently available - including the Deskjet 6xx and 1600 series. The new Deskjet 8xx output module for the Studio printing program supports this new mode. It allows you to use the printers enhanced 64 color mode. In this mode, you can print up to 64 colors at 300dpi. Normal drivers only offer you 8 colors per addressable printer dot. The Deskjet 8xx output module offers you to select the number of printable colors beside the print density. If you select "300:300/64" as "Density" in Studio, you get 300*300dpi with 64 colors per dot. Note that this improved color mode requires more computing time and thus is often somehow slower. Using this mode does not improve text or simple line art graphics with primary colors. The main improvement comes with color images. ------------------------------------------------------------------ Canon BJC Different to the manual (V2.09 an ealier), Custom ResX and ResY defines the page size for the CanonBJ5-230 and CanonBJ-EC in 1/360inch. The page size does include the unprintable margins. The driver will automaticly subtract the margins for you. The margins depend on the printer and emulation (Extended Emulation offers a larger printable page size). Canon BJC 610 users: please note that printing 720 dpi using the Studio Workbench driver requires major color adjustments. Use the menu presets for adjusting the driver for 720dpi support. Note that the Canon bJC 610 will only print 720 graphics in BJC mode (extended emulation). Whenever possible, use the printing program's CMS for printing 720dpi. BJC 610 should use the BJC 600 profiles with the printing program. So when installing the profiles, select the BJC 600 and BJC 610 profiles as recommended by the installation program. More Canon BJC 610 720dpi and 720*360dpi profiles for various dither methods and paper types are under development (see CompuServe's AmigaUser forum library for the latest profiles updates). If you experience strong stripes/banding of 1mm height in your BJC 610 output: make sure you run the print head alignment test as described in the BJC manual. Also make sure the print head is ok. Perform a printer nozzles test as described in the manual and clean the print head several times. In some cases it can help to print 20-30 fully colored pages if the print head was new. The stripes are not caused by the printer driver. However, your print mode, dither method and paper used are important. Don't try to print high resolution on bad paper. You rather get worse results compared to 360 dpi dumps. If you do experience 1mm height stripes, try switching the dither method. The BJC often prints less horizontal stripes when using an error diffusion (Floyd, Stucki,...) or Blue Noise dither method. ------------------------------------------------------------------ STUDIO PRINTING PROGRAM After three years work Studio's V2.10 CMS printing system is finaly done. With release V2.10 we finaly have CMYK support built-in and various precise profiles. The system now basicly allows you to control any color aspect of your printer. We can now concentrate on the rather "simple" things. So what's the very near future (3 months)? Most important, we will start releasing color profiles with measured values. These profiles will finaly show the power of Studio's CMS. We will start with new profiles for the Stylus Color family. If you think the color in the output is not perfect now, than wait for these new profiles ;-) Also you can expect further speed increases and more functions combined with improvements to the user interface in the very near future. ---- Studio (V2.08) now supports the PNG image format (PNG is pronounced "ping"). The PNG format is intended to provide a portable, legally unencumbered, well-compressed, well-specified standard for lossless bitmapped image files. We hope PNG will soon replace the well known GIF format. Beside offering more features than GIF, PNG also offers a very good lossless compression. We are sure PNG will soon become a well known standard beside JPEG/JFIF format used for lossy compression ---- Studio (V2.09) now supports the PCX image format. This format is very popular on MS DOS PC's. Studio supports 1,2,4,8 and 24 bit PCX files. Studio is also able to print the first image of DCX images. DCX images are mainly generated by fax software. ---- Studio (V2.10) now offers a saturation slider in the "Color..." window. An additional separation window allows you to control the separation used by Studio when printing color images without CMS. ---- The new separation functions offered are used for converting RGB screen colors to CMYK printer colors. Please note that the separation settings are used only if you print a color image without using the CMS. CMS profiles provide their own separation settings as the profiles are made for a specific separation process. Changing the separation process would result in faulty colors in the output. However, you can change the separation function used by the CMS by changing the profile settings using CMSEdit. Studio currently offers five different separation functions: Internal UCR/GCR: Uses the default internal separation. The method is simple: Studio will print a black dot if a cyan, magenta and yellow dot would otherwise be printed at the same place. Custom UCR/GCR: Uses the standard linear UCR and GCR percentage settings defined by the UCR and GCR integer gadgets. The meaning of this setting is very similar to that used by various DTP and image processing programs on the Amiga. Under color removal (UCR) describes the practice of removing quantities (here defined in percentages) of yellow, magenta and cyan from where the black is printing -- literally removing color from under the black. Greyscale component replacement (GCR) removes yellow, magenta and cyan ink from where all three inks print together, and replaces them with black. The black plate carries most of the tone in the reproduction, therefore neutrals (greys) are easier to print. Again, you define the percentage of how much color should be replaced. Custom UCR / Weak GCR: This setting uses the standard linear UCR setting as described above, but with a preset "weak" non linear grey component replacement function (Weak means less black is used). The non linear function results in composite grey being used for bright shades and black is only used for dark shades. This gives you fewer distrurbing black dots in lighter areas of your output. The output will look less grainy. Instead of offering a GCR setting, this method offers a setting for defining the maximum percentage of black being used by the replacement function. Usually a value between 80 and 100 percent gives good results. "Custom UCR / Medium GCR": This setting is similar to Custom UCR / Weak GCR. However, the GCR function will use black for brighter shades. "Custom UCR /Strong GCR": This setting is similar to Custom UCR / Medium GCR. However, the GCR function will use black for bright shades and the increase of black is nearly linear to the amount of composite grey of the processed color. So, when do you need the separation functions? Mainly when not using the CMS or when generating a profile using the tools (CMSScan) described later in an extra chapter. There is no general rule for which type of separation is best. The "Internal UCR/GCR" function is very fast and offers decent quality. The "Custom UCR/GCR" function is mainly offered for compatibility with other programs. The last three non-linear separation functions offer good quality. If your printer offers good ink coverage without bleeding and similar problems, Custom UCR / Weak GCR gives best results. For instance, if you own a normal inkjet printer, Custom UCR / Weak GCR often gives the best results when using coated paper. Plain paper often results in rather worse output as too much color ink is being printed. In those cases Custom UCR / Strong GCR might be better. Simply give it a try and see what you think is best for your printer, paper and dither method. Again note: when generating a CMS profile make sure you select the correct separation function for your set-up. Otherwise all printed calibration pages might be useless because they would have been made with a bad separation function. ---- Studio (V2.10) now includes several output modules for PCL compatible printers (mainly DeskJets and LaserJets). All output modules use Hewlett-Packard's "Printer Command Language" (PCL) in various forms. The installation program will install the proper output module for your printer. However, if you can't find an output module listed for your specific model of printer, choose an output module that matches your printer's emulation. We get many letters asking for output modules for specific printers, even if a generic module is available. In most cases these letters have been unnecessary. For instance, there is not one single drawback if you use a generic PCL 5C output module instead of a specific DeskJet 1200C module. (PS: You can use this module in b/w mode on Laserjet PCL 5 printers too!!!) The PCL 5C module was designed to work with several printers, including the PaintJet 300XL. The differences between the various DeskJet and PCL output modules are minor. Often the output module will offer you settings in the Config window which are already known by the preferences program for the Workbench driver. So if you don't find a specific setting described here, use the index of the Studio manual to learn about the meaning of the setting. First some general notes. Most modern DeskJet printers are able to print 600 dpi maximum in greyscale mode, while the color mode supports only 300 dpi maximum. If you own Studio V2.10 or higher, the program will automatically switch from color to greyscale printing if you choose a density of 600 dpi. When it comes to color printing, the DeskJet 8xx output module is a little different. Please note that a printer like the DeskJet 850C offers 300 dpi color printing similar to the cheaper DeskJet 660C printer. But the DeskJet 850C printer also offers 64 color shades per addressable printer dot, compared to the normal 8 colors. This results in a much better output quality when printing images. So once the DeskJet 8xx output module is selected, the "Density" gadget in Studio will also show you the printable color shades per addressable printer dot. ---- Following additions have been made to the ARexx interface of Studio V2.10: VERSION Returns the version of the Studio ARexx interface. Up to version 2.09 Studio returns 1 in PRTSTUDIO_RESULT. Version 2.10 and higher returns 2. COLOR GREYSCALE Selects the default output print mode. The previous setting is returned in PRTSTUDIO_RESULT. No error is reported. Note that it is valid to select COLOR even if the image selected is a greyscale one or the printer driver selected doesn't support color. The setting mainly reflects the default preset. Studio will automatically switch to greyscale printing if required. The commands require Studio V2.10 or higher. Use the Version command for detecting the Studio version. SEPARATION SEPARATION 0-4 Sets the type of separation used when printing a color image without using the CMS. The previous setting is returned in PRTSTUDIO_RESULT. If there was an error, RC is set to 10 and PRTSTUDIO_RESULT to "Illegal value". The following values are supported: 0: Use the default internal separation. 1: Use the standard linear UCR and/or GCR settings defined by the UCR and GCR commands. 2: Use the standard linear UCR setting with a preset weak (Weak means less black is used for replacing composite grey.) non linear grey component replacement function. The GCR command can be used for defining the maximum percentage of black ink being used by the replacement function. 3: Use the standard linear UCR setting with a preset medium non linear grey component replacement function. The GCR command can be used for defining the maximum percentage of black ink being used by the replacement function. 4: Use the standard linear UCR setting with a preset strong non linear grey component replacement function. The GCR command can be used for defining the maximum percentage of black ink being used by the replacement function. The Separation command requires Studio V2.10 or higher. Use the Version command for detecting the Studio version. UCR UCR 0-9999 Sets or reads the amount of under color removal (UCR) in percent. The setting is used depending on the type of Separation selected. The previous setting is returned in PRTSTUDIO_RESULT. If there was an error, RC is set to 10 and PRTSTUDIO_RESULT to "Illegal value". The UCR command requires Studio V2.10 or higher. Use the Version command for detecting the Studio version. GCR GCR 0-9999 Sets or reads the type of grey component replacement (GCR) used by the separation function. The meaning of the GCR value mainly depends on the separation function being used. The value either defines the percentage for black generated from a color by the GCR function, or it defines the maximum amount of black ink to be used. The previous setting is returned in PRTSTUDIO_RESULT. If there was an error, RC is set to 10 and PRTSTUDIO_RESULT to "Illegal value". The GCR command requires Studio V2.10 or higher. Use the "Version" command for detecting the Studio version. ------------------------------------------------------------------ Studio Prof. History: E = removed bug C = changed I = improvement 10.07.95 V2.08 I - Support for the new PNG image format added. E - Problem with reading compressed Targa images fixed E - Version 2.07 didn't install the SetupPJL program for Laserjet 4L users. Users had to select PCL 5e during installation for getting SetupPJL. 21.07.95 V2.09 I - PCX file format support added I - DCX file format support added 27.11.95 V2.10 I - Switched to SAS/C V6.56 compiler. Optimizer now seems to work fine and thus was fully enabled. I - This is the major improvement in V2.10: Scaling, Dithering, Border handling, Effects, CMS, and much more... rewritten for complete CMYK(!!!) processing. Slightly faster too. I - And this is the second major step: CMS now accepts CMYK profiles and profiles with various precission. I - Saturation control added to the color window. I - Update to PNG compression library E - BNoise b/w dither method was not reentrant since V2.07. Now reentrant again. I - Separation functions/settings added. Binary CMY->CMYK and CMYK->CMY functions added beside the standard UCR/GCR functions. I - SEPARATION [0-4], UCR [0-9999], GCR [0-9999], GREYSCALE, COLOR and SATURATION [-50 - 50] Arexx commands added. Arexx Version command will now report "2" to reflect the changes. E - A problem reported by a user when printing from ARexx hopefully got fixed - even though I couldn't repeat the problem on my machine. The problem seems to cause dark/black images being printed when not using the the PANEL command prior to PRINT or PRINT WAIT. I - Blue Noise non binary dither method (previously only used by Fargo output module) now much faster. Also fixed: BNoise 30% was printed as 50%. I - Studio Version is now supplied to the output module. I - Studio will now switch to greyscale printing for a specified print density if output module doesn't support color printing for a specific resolution. For instance, a Deskjet 660C can only print greyscale at 600dpi. I - Added additional functions to Studio server for upcoming PageStream V3 server printer driver. These functions offer an easy way to a future setup window of the PageStream driver. E - Canon BJC800 output module didn't allowed paper width greater 8.5 inch. Because of this, users had to use the slower Workbench driver for printing A3. Similar problems with right margin do exist with other Canon modules when printing 180 dpi. Fixed. I - A bug in the BSC/Alpha Data Multiface III pit.device can cause a lockup of any print program with a priority below 0. All output modules will now open pit.device with a changed priority of zero unless priority was set to high by user (in this case pit.device is always accessed with priority 0 anyway). I - Canon BJC 610, Deskjet 8xx, 6xx, 1600 and PCL 5C output module with CRet and TES (REt) support added. Also drivers and profiles added for these new printers. E - CanonBJ-EC right margin problems when using a different density than 360dpi fixed. I - 1200 dpi PJL and Max Res setting added to LaserDriver for Lexmark Optra 1200dpi laser printers. (not included with this update disk) 23.12.95 V2.10b C - Recompiled without SAS/C Peephole Optimizer (just to make sure... as it seems the Optimizer still didn't worked right). E - DeskDriver4C might print 3-4 unwanted characters on a page with some programs. Fixed. E - Fargo Primera greyscale printing problems fixed. I - PCL_5C output module now works with some none 100% compatible PCL 5 printers. Faster too. COPYRIGHT/DISCLAIMER ==================== Copyright ©1991-96 Wolf Faust. All rights reserved. The Studio V2.10b update disk has been provided to you strictly 'as is', without warranty of any kind. In no event shall Wolf Faust be held liable for any loss or damages arising out of any action, from whatever source, concerning the use or inability to use the software. You may not use, copy, or transfer the product, or any copy or portion, without prior consent in writing from Wolf Faust. The disk can be distributed via electronic media like CompuServe or InterNet as long as no payment for the software is asked. Any other distribution is strictly forbidden. Installer project icon (c) Copyright 1991-93 Commodore-Amiga, Inc. All Rights Reserved. Reproduced and distributed under license from Commodore. (Continue by pressing 'Q')