home *** CD-ROM | disk | FTP | other *** search
-
- Version 0.8 of the DVI to HP PCL printer driver 'dvi2pcl' is now available
- for anonymous ftp from
-
- Name: hybrid.irfu.se
- Address: 130.238.30.23
-
- This release fixes a bug wich showed up for largish jobs (> 50 pages)
- with many soft fonts downloaded so that, in addition, graphics raster
- fonts were being used. If a pcl string was read via \special and that
- string changed the printer resolution, the graphics raster glyphs were
- printed with the latter, incorrect resolution.
-
- Binary downloading of font and char descriptors is now done explicitly
- value by value in order to avoid any struct alignment problems. This
- should improve portability to different architectures and may solve the
- problems reported by some users running SGI and PC/386 with non-gcc
- compilers.
-
- Note that the '-o' option has changed. The file extent '.pcl' is no
- longer attached to the output bitfile name. This is to simplify
- printing to the bit bucket ('-o /dev/null') for testing purposes. Also,
- since 'dvi2plc' can write directly to standard output, there is usually
- no need to save the bitfile but rather one should pipe the output
- directly to the printer spooler ('dvi2pcl <file>.dvi | lp -or
- -d<dest>').
-
- Version 0.8 adds support for color text for PaintJet printers via the
- command:
-
- \special{pjxl:<color>}
-
- where <color> is either 'black', 'red', 'green', 'yellow', 'blue',
- 'magenta', 'cyan', or 'white'. With the new 'pjxl.sty' style file, text
- color may be changed by using shorthand commands: '\black', '\red',
- '\green', etc.
-
- For PaintJet printers, 'dvi2pcl' only works acceptably with downloaded
- soft fonts (not raster graphics ones) so printing on the PaintJet, which
- cannot handle soft font downloading, or on the PaintJet XL with raster
- fonts, does not work yet. The number of fonts downloaded to the PaintJet
- XL must not exceed 28 (= the hardware limit). Ordinary raster graphics
- pictures are printed OK. Rules are not printed on PaintJet XL since
- the PJXL has no hardware support for this.
-
- Version 0.8 adds rudimentary support for device selection via the '-d'
- option ('-j' obsoleted, for compatibility with the 'lp' spooler).
- Printers supported via '-d' are: "lj+" (HP LaserJet+), "lj2" (HP
- LaserJet II), "lj2d" (HP LaserJet IID),"lj2p" (HP LaserJet IIP),"lj3si"
- (HP LaserJet IIISi), "lj3p" (HP LaserJet IIIP),"pj" (HP PaintJet), and
- "pjxl" (HP PaintJet XL). In fact, only "lj+" has any effect. This flag
- overcomes certain hardware limitations (missing transparency mode) in
- the LaserJet+. It is the user's responsibility to add the '-f <nnn>'
- flag to limit the number of soft fonts for the particular printer used.
-
- The man page has been updated to reflect changes and corrections ('-d',
- '-o', '-r', and '-R' options; '\special' command 'pjxl:')
-
- This release is the last alpha release. The next release, v0.9 will be
- the first beta release and will have the (now quite ugly) code cleaned
- up and shortened considerably. New functionality (support for
- PostScript graphics in PCL via ghostscript, virtual fonts, and permanent
- font downloading for faster printing) is planned for v0.9.
-
- Please report successes and problems for your specific hardware/compiler
- combination.
-
- Uppsala 23 Nov 1992
-
- ---
- ^ Bo Thide'--------------------------------------------------------------
- |I| Swedish Institute of Space Physics, S-755 91 Uppsala, Sweden
- |R| Phone: (+46) 18-303671. Fax: (+46) 18-403100. IP: 130.238.30.23
- /|F|\ INTERNET: bt@irfu.se UUCP: ...!mcvax!sunic!irfu!bt
- ~~U~~ ----------------------------------------------------------------sm5dfw-
-