Amiga ISO Collection/AmigaUtilCD1.iso/CDRom/SMK-MC13.LHA/makecd_1.3/english/MakeCD.txt

Text File | 1997-01-17 | 14.4 KB | 375 lines

+-------------------------------------------------------------------------
| $Id: MakeCD.txt,v 1.6 1997/01/17 16:07:13 angela Exp $
+-------------------------------------------------------------------------

MakeCD is Copyright © 1996 by Angela Schmidt and Patrick Ohly. All rights
reserved.

This is first non-beta version of MakeCD. There is no manual available
yet, but with the built in online help, nobody should experience serious
diffculties using the software.




                            SPECIAL FEATURES

      o Amiga protection bits und file comments in CD-ROM Images
        _________________________________________________________
           MakeCD was the 1st program that brought this great
        feature to you. Meeting Pearls IV has been mastered with
                                 MakeCD.
        ¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
      o Online images (second partition not required)
      o Supports ISO 9660 and Rock Ridge extensions
      o Relativly few memory requirement while generating ISO 9660
        structures.
      o Supports CDTV and CD32 (bootable CD-ROM's possible)
      o All source directory trees for the ISO image are optionally
        put into one distinct subdirectory each in the root of the
        image.
      o Locale support (at this time emglish and german)
      o Online Help (Bubblehelp, can be disabled)
      o Font sensitive layout
      o Style Guide adhering (opens e.g. on a Public Screen)
      o Easy to use
      o Writes both data and audio tracks
      o Modular (other CD-Writers can be added as needed)
      o Recovery mode (depends on driver!)
      o BEST VALUE FOR YOUR MONEY, especially for non commercial users
      o Compatible (tested on many different configurations)




                                   GUI

MakeCD uses the freely distributable layout library "triton.library". If
you want, you can register triton.library in order to save some of your
GUI settings. Of course, MakeCD also runs fine with unregistered versions
of triton.library! Please read "Triton.readme".




                               BUGREPORTS

Please send any bug reports directly to the authors. Bug reports on
writing CD-ROM's or on the GUI shoud be sent to Patrick Ohly. Bug reports
on creation of CD-ROM images should be sent to Angela Schmidt. If you
want to email a bug report, please use the address "[e-mail]",
which automatically reaches both authors.




                   WE NEED YOUR HELP AND YOUR FEEDBACK

To adapt MakeCD for as many CD-Writers as possible, we need YOUR
help. Any testers who are unusally helpful, especially when they
help to support more CD-Writers, can possibly get a free
registration.

If you want to help us, please do this:

1) Open the Hardware window with the menu.

2. Chose a command set for the CD-Writer you have. If we support your
   CD-Writer already, you can't chose a command set. In this case you
   can stop the test here. Anyway, many thanks for your help.

3) Turn on the Test-Mode. While this mode is active, the CD-R in
   your CD-Writer WON'T be written to. You can test MakeCD
   (usually) without risk this way. Even though the CD-R won't be
   written to, all data transfers are still done. So it is possible
   to test if your system is fast enough to support safely writing
   to a CD-R.

4) Try if there are any errors if you write to a CD-R. Unless the
   CD-Writer totally misinterprets the given SCSI commands, there
   is no danger for your CD-R while the Test-Mode is turned on. If
   you get any errors, please try a different commands set.

5) Please tell us the EXACT description of your CD-Writer and the
   command set that worked for you.

6) If there wasn't any command set that worked, although your CD-Writer
   should be compatible to one of the command sets, please set the DEBUG
   tooltype in the MakeCD icon to turn on debugging mode. Then restart
   MakeCD and copy the output that MakeCD writes into a console while
   writing to a CD-ROM. Send us this output then and, if at all possible,
   any documentation about how to control your CD-Writer.

7) Please send all information to <[e-mail]>.
   Thanks a lot!




                 AMIGA PROTECTION BITS AND FILECOMMENTS

Yes, you did not misread this. Finally, it is possible to record
the Amiga protection bits and file comments on a CD-ROM. Several
Amiga software developers and the main author of the Rock Ridge
Interchange Protocol created a standard to record these Amiga
attributes in Rock Ridge compatible fields.

At this time, AmiCDFS already supports this feature. CacheCDFS and
AsimCDFS have announced this feature, and we hope that soon other CD-ROM
filesystems will support Amiga attributes. A basic requirement is Rock
Ridge support, though.

Now you can finally make backups on CD-R's. The advantage: Fast
access times and the Amiga attributes won't get lost anymore with a
suitable filesystem.



             CREATING ISO IMAGES WITHOUT WRITING TO A CD-ROM

Naturally, you can create an ISO image file for each track without having
to write a CD-R. When setting up the track destination options, you
activate the "Create image file" option and set a name for the
destination image file. When you are done setting up all the tracks, you
click on "Generate Image-Files ..." instead of "Write Tracks ...". That's
all. Easy, isn't it?




                 ASYNCHRONOUS RECORDING OF CD-ROM-IMAGES

MakeCD makes it possible to write CD-ROM images WITHOUT having to
create a temporary disk file. This means that you DO NOT NEED an
additional 1 GB harddrive to create a CD-ROM.

For many small files the generated data stream may eventually turn
non continous if your system can not evaluate the source data
fast enough and the CD-R may turn out to be defective.

Please try with the Test-Mode first, if everything if fast enough
to work correctly. You can try to increase the buffer size and
reduce write speed to a minimum. Watch the buffer fill level while
writing to check if there are any bottle necks that need your
attenton.




                          COPYING AUDIO TRACKS

You can copy audio tracks without any problems, but the source and target
drive must use exactly the same speed, if you copy without intermediate
image file. You can select the speed for reading audio tracks seperately,
but currently no MakeCD CD-ROM driver tries to set this speed in order to
avoid restricting compatiblity. In this case you have to take care yourself
that the target drive's speed is reduced to the current speed of the source
drive. Many CD-ROM drives read CDDA data in single speed.

As the source drive cannot pause after it has started to deliver CDDA
data, direct copying of audio data is a fairly time critical issue.  You
should definitely try it in test mode first.




                              OUR TODO-LIST

Would you like to know what we intend to do with MakeCD in the
future? This is our TODO-List.

    o Add multisession support for ISO images
    o Integrate optional limit to a directory depth of eight levels
      (ISO 9660 standard)
    o Support all known CD-Writers and drives
      (coming soon: final CDD2600 driver, Plextor CD writer,
       Mitsumi writer, Plextor CD-ROM drive with the ability to set speed)




                RESTRICTIONS OF THE UNREGISTERED VERSION

Compared to the registered version, the unregistered version has a
few built int restrictions:

- The name of the CD-ROM and the "Publisher" cannot be changed.

- You can write a maximum of ten tracks to a CD-R.




                            LICENSE AGREEMENT

=========================================================================
   All prices here are introductory offers valid until 15.feb.97 only.
  Please check any available updates then for new pricing information.
=========================================================================

As we think that about DM 200,- to 400,- is a very painful amount of
money for a non commercial user to spend on this, we thought up something
to still make some profit (as all the other vendors of mastering
software):

There are three classes of licensing. The more "commercial" the user uses
our software (and the more money he makes with it), the higher his or her
registration fee will be for MakeCD. Non commercial users pay only a
little. User who burn CD-ROMs for anyone for a fee pay a currently common
amount. User who have their mastered CD-ROM's duplicated commercially at
a CD manufacturer (and usually sell them) pay a fee that has to be
negotiated with the authors individually. We can think of several ways to
license MakeCD here. Just contact us!

We hope that this is a fair compromise. Why should someone who creates
CD-ROM's just for fun pay the same amount as someone who makes large
amounts of money on duplicating and selling CD-ROM's?

Please remember that development of MakeCD could not have been done
without investing considerable amounts of money. If you use the software,
consider registering seriously and support further development and
enhancements to MakeCD as they will be costly, too!

1) Private, non-commercial usage
   There is a one time registration fee of DM 50,- (until
   15.feb.97). Any CD-ROM's created with MakeCD may only be used
   for your private non-commercial needs. "Publisher" cannot be
   modified.

2) CD-ROM recording service, non-commercial duplication. The
   one time registration fee is DM 300,- (until 15.feb.97). This is
   in the range of other currently available software of this type
   for the Amiga. The recored CD-ROM's may be sold to the
   repsective customers who may not re-duplicate them again for
   commercial purposes. CD-ROM's created by MakeCD with this
   license may not be used as masters for pressing CD-ROM's. An
   exception is the non-commercial duplication with CD-R's.
   "Publisher" cannot be modified.

3) CD-ROM Manufacturer, commercial duplication.
   We don't have a standard price for this at this time. Please
   contact either Angela Schmidt or Patrick Ohly. We'll work up a
   license together then. This license allows you to press CD-ROM's
   with masters created by MakeCD. You will also be able to change
   "Publisher" as needed.

The Application-ID field will always contain the serial number
(which isn't the same as the registration number) of the registered
version.




                                 UPDATES

MakeCD is still in development. You will find the latest versions of
MakeCD, new drivers for CD-Rs etc. in internet:
http://www.uni-karlsruhe.de/~un60/MakeCD.html

Additionally, you can get the latest version for 5 DM plus shipping
costs from Katrin Schmidt. See Registerform.




                              MAILING LISTS

There are three different mailing lists for MakeCD:

[e-mail]
     For discussions with other users of MakeCD. The authors of MakeCD
     will read this list, too, so they can answer questions if noone
     else is able to answer. Sometimes they will ask you what you think
     about a new feature etc.

[e-mail]
     No discussions, only announces from the authors. For example we will
     announce new versions and new drivers on this list.

[e-mail]
     This list brings all new MakeCD binaries directly into your mailbox.
     It is useful if you do not have access to ftp servers or homepages
     in the internet, and so are unable to download new MakeCD archives.

To subscribe, send "SUBSCRIBE <user@host>" to
<listname>[e-mail], where <listname> is the name of
the mailing list, e.g. "ml-makecd-announce". Don't send requests to the
lists themselves, i.e. don't forget the "-request" in the address! To
subscribe the email address "[e-mail]" to the announce list,
send the following message:

-------------------------------------------------------------------------
To: [e-mail]
Subject: Anything

SUBSCRIBE [e-mail]
-------------------------------------------------------------------------

To unsubscribe, send a similar message, but replace "SUBSCRIBE" by
"UNSUBSCRIBE".

Send the following message to get further instructions:

-------------------------------------------------------------------------
To: [e-mail]
Subject: Anything

HELP
-------------------------------------------------------------------------




                                 CREDITS

                              Heinz Wrobel
          Valuable suggestions for a GUI that is easier to use.
          English translation of big parts of this Readme file.

                             Klaus Melchior
                             Frank Zündorff
                         Great/many bug reports.

                             Lars Eilebrecht
                          MakeCD-Mailinglisten

                            Michael van Elst
                              CDDA sources




                            AUTHORS OF MAKECD

                  EMail to both authors (recommended):

                        >>> [e-mail] <<<

          +--------------------------------------------------+
          |    GUI, SCSI, access of CD-Writer and CD-ROM:    |
          |                                                  |
          |                   Patrick Ohly                   |
          |               Weechstr. 1, WG E0/1               |
          |                  76131 Karlsruhe                 |
          |                      Germany                     |
          |                                                  |
          |             Telephone: [phone]            |
          |    E-Mail: [e-mail]    |
          |        http://www.uni-karlsruhe.de/~un60/        |
          +--------------------------------------------------+

          +--------------------------------------------------+
          |            Creation of ISO 9660 image:           |
          |                                                  |
          |                  Angela Schmidt                  |
          |                Klosterweg 28/I501                |
          |                  76131 Karlsruhe                 |
          |                      Germany                     |
          |                                                  |
          |             Telephone: [phone]            |
          |   E-Mail: [e-mail]   |
          |        http://www.uni-karlsruhe.de/~uk8b/        |
          +--------------------------------------------------+

                               *** EOT ***