ProfitPress Mega CDROM2 Shareware Freeware (MSDOS)(1992)(Eng)

home *** CD-ROM | disk | FTP | other *** search

/ ProfitPress Mega CDROM2 …eeware (MSDOS)(1992)(Eng) / ProfitPress-MegaCDROM2.B6I / UTILITY / MISC / EXD110.ZIP / EXDEL.DOC next >

Wrap

Text File | 1991-07-01 | 17.4 KB | 525 lines

exDEL 1.10 ========== Operating Instructions Manual Unregistered. S/N 51102740110. Released 7-1-1991. Copyright (C) 1991 by Chieh Cheng. All Rights Reserved. Chieh Cheng 17914 Florwood Ave. Torrance, CA. 90504-3847 FAX (213) 715-6752 GEnie - C.CHENG3 exDEL 1.10 I exDEL, its manual, and other files included are Copyrighted (C) 1991 by Chieh Cheng. No part of the program or this manual may be copied in part or in whole without prior written permission from the author, except as provided in the License in the following page. Many products and names found through out this manual are trademarks of various companies. Disclaimer ---------- The material in this manual is for information purposes only. The contents and the product(s) it describes are subject to change without notice. We make no warranties, of any kind, with respect to this software and manual. In no event shall we be liable for any damages, direct or incidental arising out of or related to the use of this software and manual. If there is any problem, please feel free to write to us. Write to us at: Chieh Cheng 17914 Florwood Ave. Torrance, CA. 90504-3847 FAX (213) 715-6752 GEnie - C.CHENG3 exDEL 1.10 II License ------- exDEL 1.10 is being released as Freeware. This only applies to this current version, since future versions may or may not be released as Freeware. Freeware means that users may use this software, free of charge, for as long as they want. But any files included may NOT be modified in any way, or for any reason without permission from us. This program is copyrighted software. However, the diskette with all files may be freely copied and shared with others. These files may be distributed via modem from bulletin board systems, provided that all files are transmitted (archived) together. No files on this disk may be distributed unless all files are included. No modifications are allowed without the author's written approval, agreement, and/or permission. BBS operators may list exDEL on their BBS for downloading by users of the BBS with the above conditions met. Distributers ------------ To get the latest version, please read the next page. exDEL 1.10 III Registration ------------ Freeware does not require to be registered. But you may do so to show your support. You may register in the following way: 1) Send me a letter telling me that you are using the program and/or by filling out the enclosed (read the READ.ME file) questionnaire and send it back to me (I prefer both); 2) Send me $5 for donation or as much (or less) as you want; 3) Send me $10, and I will send you either the most recent version, or next released version (your choice), along with your registration number labeled on the disk and embedded into this manual and program. ($5 will be donation, and the other $5 for materials.) Please tell me what disk type you need - 5.25" floppy or 3.5" Micro; 4) Send me as much as you want (over $10) and I'll send you everything you'll get in choice 3! :-) I might even send you new versions when they are released! If you have registered by sending me at least $5, you may receive upgrades for $5 (or download them and get it for free!) by sending me a letter telling me what version you are currently using (so I won't send you the latest one if you already have it.), disk type, and address if you moved. You will get everything you will get in choice 3 above. The $5 will be used for materials and shipping costs. If you send me a letter or the questionnaire, you may receive an upgrade by sending me $7. It's not as good as registering because you'll have to send me $7 everytime, so either send me $10 or, like I said before, download the program somewhere. The diskette, if I sent you one, will be warranted against defects in materials and workmenship for a period of 60 days fro mthe date of shipment by us. Any returned diskettes found bad will be replaced at no charge. If you do not have a printer and wish to have a hard copy of this manual, just sent $15 to me and I'll send you a copy. It will be formatted with a word processor to look as professional as possible. Also I will capture some screens and place them in it for figures. exDEL 1.10 1 Table of Contents ================= Table of Contents .............................................. 1 Introduction ................................................... 2 System Requirements ............................................ 3 Getting Started ................................................ 4 Installing the program on hard disk ....................... 4 Running exDEL ............................................. 4 Syntax .................................................... 5 Command-line Options ...................................... 6 Rules ..................................................... 7 Examples .................................................. 8 Error Messages ............................................ 9 Comments from the author ....................................... 10 exDEL 1.10 2 Introduction ============ exDEL is a utility in which suppose to replace the DOS internal command DEL. Originally I planned on writing a utility to delete all the files I did not specify on the command-line but went off track and wrote this one in which is in some way an improvement to the DEL command. Of course, I will implement my original idea into exDEL as soon as possible. This is the third release of exDEL with a few more features than before - deleting directories, and ask for confirmation beforing deleting files. Features: - Shows how much files have been deleted. - Display which files have been deleted. - Allows more than one file masks to be entered. - Compatible with the DOS DEL command. - Ask for confirmations. - Deleting directories. I didn't get to implement my original idea yet, but I needed these two new features more. Anyway, the confirmation is pretty much the same as my original idea except you have to press the y or n key. exDEL 1.10 3 System Requirements =================== exDEL requires an IBM or compatible computer running DOS 3.0 or higher. However, I have never tried to use it with any DOS versions under 3.3, but they should work (including 2.0). Try it and tell me. Since this is only a command-line utility, it will work with any screen type, although a display with 80 columns is recommented. This version do not use color but future version may, if you have a color monitor. A disk drive is essential. exDEL has been tested with the followings: - 80286 compatible. (AT) - 80386 compatible. - Microsoft DOS 3.3. - Digital Research DOS 5.0. - Microsoft DOS 5.0. - Microsoft Windows 3.0. - Novell ELS Netware 286 Level I Kit. - 1 megabyte RAM drive. - 1.2 megabyte disk drive. - 1.44 megabyte disk drive. - 40 and 80 megabyte hard disk. - VGA card and monitor. - Monochrome card and monitor. - ETen Chinese Information System. (¡╩ñ╤ñññσ¿t▓╬) exDEL 1.10 4 Getting Started =============== Installing the program on hard disk ----------------------------------- To install the program, simply go to you hard disk and make a directory for exDEL (MD exDEL). Then copy everything in the exDEL archive or disk into that directory. I suggest change the path to include exDEL. A better way is to setup a directory (if you don't already have one), where you place all your commonly used utilities, and copy exDEL into it. The directory should be included in the path. Running exDEL ------------- Unlike other applications, exDEL is not written to be ran without any command-line options. If you were to do so, the following screen will be displayed: exDEL 1.10 - S/N 51102740110 - Released 7-1-1991. Copyright (C) 1991 by Chieh Cheng. All Rights Reserved. No command-line parameters. Syntax: [d:][path]exDEL.EXE [options] [d:][path]filename.ext exDEL is able to accept more than one file specification to delete at a time. Options: -d, D Display files -c, C Confirmation -n, N No display -f, F Delete directory exDEL 1.10 5 Syntax ------ The syntax for exDEL is: [d:][path]exDEL.EXE [options] [d:][path]filename.ext Specifications surrounded by brackets, [], are optional. exDEL will also accept more than one filename.ext (mask). The first [d:] is the drive where DOS could find exDEL. The second [d:] is the name of the disk drive that holds the files(s) to be deleted. For example: C:. The first [path] is the directory where DOS could find exDEL. The second [path] is the directory where the file(s) you want to delete are. For example: \exDEL\. [options] is where you specify the command-line options discussed later. filename.ext is where you specify which files you want to delete. Wildcards (* and ?) are allowed. Examples: *.*, ?f?.*, exDEL.EXE, *.com, etc. exDEL 1.10 6 Command-line Options -------------------- Acceptable options: -d, D Display whether files are deleted or if an error had occured. It lists all files found using the file specification. -n, N No display, none at all, just like the DEL command. -c, C Asks for confirmation. Like the way MS-DOS 5.0 does it. I'm not sure about other DOS versions. -f, F Deletes directories. Allow you to remove a directory without deleting all the files in it manually. You may specify all the options, but -n have higher priority. Therefore if you specify both -d and -n, nothing will be displayed. -c will automatically set -d to on. The dash (-) in front of the options could be replaced with a slash (/). For example, -d could be replaced with /d. More options will be added later. exDEL 1.10 7 Rules ----- 1. If you do not give a disk drive name, the current drive will be used. 2. If you do not give a path name, the current directory will be used. 3. If you give drive name and path name, but no file name, exDEL will quit and display "0 file deleted". Unlike the DOS version, exDEL will not assume you mean *.*. 4. Unlike DOS, if you use *.* as file specification, exDEL will not ask "Are you sure (Y/N)?". It will proceed and delete all the files. 5. Current version of exDEL still won't let you remove all the files in a directory in your current directly when you type: exDEL dir But will when you use the -f switch. Of course, removing the directory also. 6. exDEL will not allow you to remove a directory if it contains another subdirectory. You'll have to use exDEL to delete the lowest level subdirectories first and then move up the tree. It's good in a way that you won't accidently delete a whole root, but frustrating if you know what you are doing. exDEL 1.10 8 Examples -------- exDEL *.* exDEL -d b:\*.* c:\exDEL\exDEL a:\e??EL.* -d exDEL *.* -n exDEL /n ?xDE????.DOC exDEL *.bat *.sys -d *.bak -n exDEL *.txt /d *.tmp -n exDEL *.txt /c d:\exDEL dos -f -c exDEL 1.10 9 Error Messages -------------- 1. Permission denied Occurs when exDEL tries to delete a file marked with Read-only file attribute. You must change it with the DOS utility, ATTRIB.EXE, before exDEL could delete it. Future version of exDEL will be able to delete files marked with Read-only and others. 2. No command-line parameters You did not enter any command-line parameters. Refer to the Syntax section. 3. No file specification You did not tell exDEL what files you want to delete. Refer to the Syntax section. 4. Error in command-line options You have made a mistake when typing in options. For example: -d into d or -, -d-n into -dn. Refer to the Command-line Option section. 5. Unable to delete directory There might be read-only, hidden, etc. files in the directory you use the -f switch on. Or maybe a few subdirectory still exists. exDEL 1.10 10 Comments from the author ======================== As I said before this is the third release. I can't promise you exDEL is bug-free, because I don't know if it is. Especially when I couldn't possibly test it in all aspects. If an expensive commercial software package can't be bug-free, how can mine be? I don't even have a testing crew like they do. But I guess you could be mine testing crew (grin). Please inform me if you find any bugs, inconveniences, or problems in the product. I would also like to hear your questions, requests, comments, suggestions, or improvements. If you tried this program and thought it wasn't good enough, tell me what's wrong with it and I'll try to improve it. I will be very grateful if you would send me ideas on what functions I should put into exDEL in later releases. Thanks. Just write to: Chieh Cheng 17914 Florwood Ave. CompuServe [73500,244] Torrance, CA. 90504-3847 GEnie - C.CHENG3 FAX (213) 715-6752 I could no longer affort my CompuServe account, that's why I started subscribing to GEnie. The account on CompuServe still exists but don't mail me there. I probably won't pick up my mail. Or maybe I'll check in every few months. The surest way to get to me is my FAX or address and probably on GEnie.