ProfitPress Mega CDROM2 Shareware Freeware (MSDOS)(1992)(Eng)

home *** CD-ROM | disk | FTP | other *** search

/ ProfitPress Mega CDROM2 …eeware (MSDOS)(1992)(Eng) / ProfitPress-MegaCDROM2.B6I / UTILITY / MISC / CALTVL14.ZIP / CALTRV.DOC < prev next >

Wrap

Text File | 1990-09-02 | 39.8 KB | 1,017 lines

CALTRV Version 1.04 -- September 1990 SideKick + Formatted CALendar for TRaVel Copyright (c) 1989,90 WetZoft Applications All Rights Reserved _______ ____|__ | (tm) --| | |------------------- | ____|__ | Association of | | |_| Shareware |__| o | Professionals -----| | |--------------------- |___|___| MEMBER Table of Contents I. INTRODUCTION............................................1 A. What Is CALTRV ?......................................1 B. CALTRV's Current Limitations & Restrictions...........1 C. !!!Warning!!!.........................................1 D. Files Included on Distribution Disk...................1 E. Shareware.............................................2 II. LEGAL STUFF............................................2 A. Acknowledgements......................................2 B. Trademarks Mentioned..................................2 C. Copyright Notice And License..........................2 D. Warranty..............................................3 E. Registration..........................................3 F. Support...............................................4 G. Bulletin Boards, Users Groups And Disk Vendors........4 III. COMMAND LINE OPTIONS..................................4 A. Detailed Explanation Of Options.......................5 1. /B {Begin Date}.....................................5 2. /C {Calendar}.......................................5 3. /D {Days}...........................................5 4. /E {End Date}.......................................6 5. /F {File Out}.......................................6 6. /G {Graphics}.......................................6 7. /H {Help}...........................................6 8. /M {Monthly}........................................6 9. /N {Print Notes}....................................6 10. /P {Print Output}..................................7 11. /T {Task File}.....................................7 12. /V {Max Video}.....................................7 13. /W {Weeks}.........................................8 14. /? {Help}..........................................8 B. Sample Command Lines..................................8 IV. ERROR MESSAGES.........................................8 V. INSTALLATION PROGRAM...................................10 A. Default Appointment Path & Filename..................10 B. Default Output Disk File Name........................11 C. Default Report Type..................................11 D. Default Days/Weeks/Months to Preview.................11 E. Default Screen Colors................................11 F. Print Initialization / Termination Strings...........11 G. Default Print Page Length............................11 H. Default Daily Start Time.............................11 I. Default Time Format..................................12 J. Default Video Max....................................12 K. Print Note Option....................................12 L. Use Line Draw........................................12 CALTRV CALendar for TRaVel Documentation Page: i M. Default Resident Task Manager File...................12 N. Print End Times Option...............................12 VI. ASSOCIATION OF SHAREWARE PROFESSIONALS................12 A. The primary goals of the ASP:........................13 VII. OTHER PROGRAMS BY WETZOFT APPLICATIONS...............13 A. Resident-TaskManager - RTM...........................13 B. CALRPT...............................................14 VIII. VERSION HISTORY.....................................14 CALTRV CALendar for TRaVel Documentation Page: ii I. INTRODUCTION A. What Is CALTRV ? CALTRV is a program that produces a nicely formatted calendar report (Screen, Printer, or File) from Sidekick+'s Calendar file without invoking Sidekick+. CALTRV's three reports (Daily, Weekly, Monthly) give you a quick and concise view of you plans and appointment. This is especially helpful in your AUTOEXEC file to show you what is on your Calendar for the next few days. Also CALTRV's reports were designed to fit into a small notebook suitable for traveling. To invoke CALTRV just type CALTRV from the DOS command line or place the command CALTRV somewhere in your AUTOEXEC.BAT file. For Help on Parameters and to find out the defaults - type: C:\>CALTRV /? Also available to CALTRV users is Resident-TaskManager. Resident-TaskManager allows you to integrate your task list with your calendar to get a comprehensive list of your daily activities. See the /T option described later in this document. B. CALTRV's Current Limitations & Restrictions 845 Appointments within selected time span 64K SK+ Record Sizes (Usually caused by a lot of repeating appointments or HUGE notes. 50 Notes per day C. !!!Warning!!! There have been a few isolated reports of corrupted SK+ calendars. This condition is NOT caused by CALTRV (CALTRV IS READ ONLY!) nor is CALTRV very happy when it runs into a corrupted Calendar. The sequence of events that occurs is that CALTRV reports it is reading the appointment file, it may report it is processing the repeats, and the system hangs. This is NOT (99.9% of the time) a problem with CALTRV! If you run into this condition please contact me. I am trying to program around this condition but need one or more calendars to test with. D. Files Included on Distribution Disk The CALTRV Distribution Disk contains the following files: CALTRV.EXE - The CALTRV program CALTRV.DOC - This file CALTINST.EXE - An installation program for setting CALTRV Options README - Changes or important information not included in the printed documentation (CALTRV.DOC). REGISTER.BAT - A BATch file to print out the registration form CALTRV CALendar for TRaVel Documentation Page: 1 to your printer (LPT1) REGFORM.DOC - The actual Registration Form PRINTDOC.BAT - A BATch file to print out this documentation file to your printer (LPT1) VENDOR.DOC - Instructions to Disk Vendors who wish to distribute CALTRV. Copy these files onto your disk into whatever directory you wish. Then, consider how you want to run CALTRV and set your options (See: Installation Program later in this file). E. Shareware Shareware is a distribution method, not a type of software. You should find software that suits your needs and pocketbook, whether it's commercial or Shareware. The Shareware system makes fitting your needs easier, because you can try before you buy. And because the overhead is low, prices are low also. Shareware has the ultimate money-back guarantee -- if you don't use the product, you don't pay for it. CALTRV is distributed as Shareware -- this means WetZoft Applications encourages users, subject to restrictions described below, to share copies of this program with friends, associates and bulletin boards. You may not share the registered version of Resident Task Manager. If you make copies of CALTRV, you must include all files in the original distribution file. You are not permitted to distribute CALTRV without this documentation. II. LEGAL STUFF A. Acknowledgements A special thanks to all of those who encouraged me to continue with this project with words of praise, thanks, and many new ideas. Thanks to TurboPower Software for furnishing an excellent set of utilities (Turbo Professional 5.0) that made this program possible in 25% of the time it would have taken me otherwise. B. Trademarks Mentioned Sidekick Plus is a trademark of Borland International. Turbo Professional is a trademark of TurboPower Software C. Copyright Notice And License This document; other accompanying written and disk-based notes and specifications; and all referenced and related program files, demonstration code and object modules accompanying this document are copyrighted by WetZoft Applications. The copyright CALTRV CALendar for TRaVel Documentation Page: 2 owner hereby licenses you to: initial use of the software; make as many copies of the software and documentation as you wish; give exact copies of the original to anyone; and distribute the software and documentation in its unmodified form via electronic means. There is no charge for any of the above. This is not free software. This license allows you to use this software without charge for a period of 30 days. In order to continue using this software, include this software as part of any product, either commercial, shareware, freeware, or public domain, REGISTRATION IS REQUIRED. Any other use of CALTRV is in violation of federal copyright laws. No copy of the software may be distributed or given away without this accompanying documentation; this notice must not be removed. ONLY COPIES OF THE SHAREWARE VERSION MAY BE DISTRIBUTED IN ANY FORM. Contact WetZoft Applications if you receive a copy that does not comply with these requirements. D. Warranty There is no warranty of any kind associated with this software, and the copyright owner is not liable for damages of any kind. By using this software, you agree to this. Every effort has been made by WetZoft Applications to make this product bug-free. However, the nature of software development is that it is impossible to guarantee bug-free software. Every attempt will be made to correct any verifiable bug reported. Upgrades will be made available to all registered users. E. Registration To register CALTRV fill out the registration form at the end of this documentation, and send a check or money order (in US funds only) for the appropriate amount to: WetZoft Applications 788 Martin Ct West Severn MD 21144 Upon receipt of the appropriate registration fee, WetZoft Applications will acknowledge the registration and . Provide the user with the codes necessary to remove the shareware registration screen. . Provide the user with a registration number entitling the user to upgrades and telephone support. . Provide the user with a printed copy of the documentation and the latest copy of the software. Please specify disk size on the registration form. If no disk size is specified 5 1/4 inch disks will be sent. CALTRV CALendar for TRaVel Documentation Page: 3 The registration fee is for the use of a single copy of CALTRV by ONE individual. CALTRV may be used on any computer owned by the registered user so long as there is NO possibility of CALTRV being used at more than one location at the same time. Please contact WetZoft Applications for information on multiple copy registration and site licenses. Telephone support will only be provided to registered users. If you need technical assistance and you are NOT registered, you may either write to WetZoft Applications the address above, or contact the author on Compuserve: Jim Wetzel [75166,3200] E-Mail, BORAPP, IBMSYS F. Support Registered Users of CALTRV are entitled to the following support: . CompuServe - The preferred method of support is via CompuServe. Technical questions and inquires can be E- Mailed to: Jim Wetzel [75166,3200]. . Mail Support - You can send all questions and inquires to the address listed above. WetZoft Applications will respond as promptly as possible to your inquiry. . Telephone Support - Registered users may call WetZoft Applications at (301)-969-9385 for technical support. Voice response is generally available weekday evenings. Messages are checked periodically throughout the day. For Non-Registered users of CALTRV, we will provide you with assistance to install a shareware copy of CALTRV and evaluate it during the 30 day evaluation period. WetZoft Applications cannot guarantee continued support to Non-Registered Users beyond the 30 day evaluation period. G. Bulletin Boards, Users Groups And Disk Vendors UNDER NO CIRCUMSTANCES MAY CALTRV BE DISTRIBUTED WITHOUT ALL ACCOMPANYING DOCUMENTATION FILES (INCLUDING THIS COMPLETE FILE), ALL PROGRAMS, AND OTHER MATERIALS PROVIDED WITH THE OFFICIAL COPIES FROM WETZOFT APPLICATIONS. ANY OTHER SUCH DISTRIBUTION OF CALTRV OR ITS RELATED FILES, EXCEPT AS PROVIDED FOR IN THIS LICENSE, SHALL BE DETERMINED TO BE IN VIOLATION OF FEDERAL COPYRIGHT LAWS. III. COMMAND LINE OPTIONS Options: Space is required between /Option & Parameter CALTRV CALendar for TRaVel Documentation Page: 4 /B MM/DD/YY {Begin Date} Default=Todays Date /C filename {Calendar} Default=PERSONAL.APP /D 1-365 {Days} Default=1 /E MM/DD/YY {End Date} Default=Begin+Days /F [filename] {File Out} Default=No File Out /G {Graphics Output} Default=No Line Draw /H {Help} This Help Screen /M [1-12] {Monthly Reports} Default=Weekly /N [nn] {Note Limit} Default=No Notes /P {Print Output} Default=ScreenOutput /T [taskfile] {RTM Task File Name} Default=RTM.DAT /V {Max Video} Default=25 Lines /W [1-52] {Weekly Reports} Default=1 Week /? {Help} This Help Screen Please note that a space IS REQUIRED between the option switch '/o' and it's parameter. Dates MUST be in the form MM/DD/YY (all 2-Digit Numbers). Under DOS 3.x and above CALTRV will search for the CALENDAR file "/C" in the following places: Current Directory Directory where CALTRV resides (It's a good Idea to put CALTRV in the same directory as your SK+ Calendar DOS Path A. Detailed Explanation Of Options 1. /B {Begin Date} /B MM/DD/YY {Begin Date} - CALTRV will start its report with the date specified by the user. The Date format is: MM/DD/YY. Month and Day must be valid 2 digit date numbers: Month (01- 12), Day (01->Days in Month). The default is today's (system) date. 2. /C {Calendar} /C filename.ext {Calendar} - This parameter is used to tell CALTRV what Sidekick+ APP file to use. The default is PERSONAL.APP. If the specified file cannot be found in the Current Directory CALTRV will search for the file (DOS 3.x and higher) in the directory where CALTRV resides and the DOS Path. Full Drive and Path information is accepted. ** This is an installable option. 3. /D {Days} /D [n] {Days} - This parameter is used to tell CALTRV that you want "Daily" reports and how many days of calendar data you want to print. The valid range is 1 to 365. The default is 1. ** This is an installable option. CALTRV CALendar for TRaVel Documentation Page: 5 4. /E {End Date} /E MM/DD/YY {End Date} - CALTRV will end its report with the date specified by the user. The Date format is: MM/DD/YY. Month and Day must be valid 2 digit date numbers: Month (01-12), Day (01-Day in Month). The default is todays (system) date. /E overrides the /D option. The default is the Begin Date(/B) + Days(/D) 5. /F {File Out} /F [filename.ext] {File Out} - Optionally CALTRV can write its report out to a disk file. The default filename used is PERSONAL.RPT and will be written in the current directory. No checking is done to see if the file already exists so BE CAREFUL! If /F is specified with no other parameters the default Report File name is used. You can also specify the name of the file you want to use after the /F. Examples: CALTRV /F /D 20 Writes a 20 day report to PERSONAL.RPT CALTRV /F MYFILE.CAL /D 20 Writes a 20 day report to MYFILE.CAL ** This is an installable option. 6. /G {Graphics} /G {Graphics} - This option tells CALTRV that you have a Graphics capable (IBM Line Draw) printer. When possible CALTRV will use the IBM line draw characters to print the calendar reports rather than standard ASCII characters. 7. /H {Help} /H {Help} - Tells CALTRV to list a short help screen for the user. 8. /M {Monthly} /M [n] {Monthly} - This parameter is used to tell CALTRV that you want "Monthly" reports and how many months of calendar data you want to print. The valid range is 1 to 12. The default is 1. ** This is an installable option. 9. /N {Print Notes} /N {Print Notes} - CALTRV will optionally display a limited amount (4096 bytes) of note information that is attached to a Title or Appointment. There are a couple of restrictions: 1) Note lines are limited to 65 characters (you can have longer lines in SK+ but the printed report will be CALTRV CALendar for TRaVel Documentation Page: 6 truncated) 2) The printed report will show up to 15 note lines. If /N is specified by itself CALTRV will print out as much of the note as possible. If an optional number is provided CALTRV will limit the number of note lines printed to the number specified (within the limits described above). Examples: CALTRV /N Writes a 1 week report with attached notes. CALTRV /N 4 Writes a 1 week report with attached notes but only printing a maximum of 4 lines per note. 10. /P {Print Output} /P {Print Output} - Tells CALTRV to route its report to the printer. CALTRV will issue user defined Printer Setup/Termination Strings and will accept a User Defined Page Size. ** This is an installable option. 11. /T {Task File} /T [filename.ext] {Task File} - Optionally CALTRV can interface with Resident-TaskManager to integrate Tasks / ToDo Lists with Calendar Output. The default filename used is RTM.DAT and will be read from the current directory. If /T is specified with no other parameters the default Task File name is used. You can also specify the name of the file you want to use after the /T. Examples: CALTRV /T /D 20 Produces a 20 day report with RTM.DAT CALTRV /T MYTASKS.DAT /D 20 Produces the same report with MYTASKS.DATA Please note that if you have a Task Due 21 Days or more from the starting date of the report CALTRV will not include it into the report. CALTRV looks for PAST DUE Tasks and all TASKS up to and including the Report End Date. ** This is an installable option. 12. /V {Max Video} /V {Max Video} - This option instructs CALTRV to use the maximum video mode available for the monitor type being used (44 Lines EGA/50 Lines VGA). ** This is an installable option. CALTRV CALendar for TRaVel Documentation Page: 7 13. /W {Weeks} /W [n] {Weeks} - This parameter is used to tell CALTRV that you want "Weekly" reports and how many weeks of calendar data you want to print. The valid range is 1 to 52. The default is 1. ** This is an installable option. 14. /? {Help} /? {Help} - Tells CALTRV to list a short help screen for the user. B. Sample Command Lines List (CRT) daily appointments for the next 5 days C:\>CALTRV /d 5 List (Printer) daily appointments for the next 5 days C:\>CALTRV /d 10 /p List (Printer) all appointments for June 1989 C:\>CALTRV /b 06/01/89 /m 1 /p *** Note the two digit month & day List (CRT) appointments for the next week in the Common App File C:\>CALTRV /c C:\SKPLUS\COMMON.APP *** Note: 1 Week is default so does not need to be specified IV. ERROR MESSAGES Listed below are error messages generated by CALTRV and possible explanations: *** ERROR! mm/dd/yy Invalid Begin Date Specified This message is generated when an invalid Begin Date /B is specified. This could be the result of invalid month or day values or the month or day value was specified with a single digit. CALTRV CALendar for TRaVel Documentation Page: 8 *** ERROR! mm/dd/yy Invalid End Date Specified This message is generated when an invalid End Date /E is specified. This could be the result of invalid month or day values or the month or day value was specified with a single digit. *** Warning: End Date < Begin Date --- Begin/End Date Forced Equal This message is generate when the End Date is chronologically prior to the Begin Date. *** Warning: Appointment Limit Exceeded. nnn Appointment Records Skipped! CALTRV has a limit (specified earlier) on the number of Appointments it can store. If this limit is exceeded all remaining appointment records are skipped. This usually results in a loss of repeating appointment records. Due to the nature of the SK+ calendar early repeating appointments may be lost while later "standard" appointments will be shown. *** Warning: Max Exceptions Exceeded Repeating appointments can be excluded(deleted) on specified days using SK+. This is flagged in the calendar file as an exception to the repeat. CALTRV can track up to 30 exceptions per repeating appointment. *** Warning: Insufficient Memory to Process Notes CALTRV will store up to 4K bytes of note data per appointment. Obviously every computer system has its memory limits. If you use a lot of big notes you may run out of available memory. You may also see this message if you run CALTRV while shelled out of another program. *** Warning: Insufficient Memory to Process Repeating Notes Repeating notes are subject to the same memory limitations as standard notes discussed above. *** ERROR! SK+ Record Size Exceeded CALTRV Limit. Processing TERMINATED! SK+ supposedly can have very large records (2 Billion+ Bytes). Well CALTRV's current limit is 60K records (NOT FILE SIZE) within a file. Normally you shouldn't come even come close to this unless you have a LOT of repeating appointments or some VERY big notes. If this message occurs you might want to try deleting some of your prior years data from your calendar - it may help. CALTRV CALendar for TRaVel Documentation Page: 9 *** ERROR! Filename Not Found or Invalid Calendar File Specified. This message is a result of CALTRV not finding the filename specified in the installation program or on the command line with the /C option. Check the spelling and Drive and Path information supplied. V. INSTALLATION PROGRAM CALTRV comes with a simple installation program. This program allows you to set some of the DEFAULTS that CALTRV uses. Most of these are pretty straight forward but a small explanation is appropriate at this point. To use the installation program all you need to do is type in CALTINST. CALTINST MUST be in the same directory as CALTRV and CALTRV must not be renamed. CALTINST allows you to alter the following: Field Defaults Appointment File Location PERSONAL.APP Default Output Disk File PERSONAL.RPT Report Type [Weekly] Days/Weeks/Months to Preview 1 Standard Fore/Background BrWhite/Blue Message Fore/Background Black /Lt Gray Printer Setup String [ ] Printer Termination String [ ] Page Length: 59 Daily Start Time 08:00a Time Format Am/Pm Video Max Off Print Notes On Use Line Draw Off Resident Task File Location: RTM.DAT The fields are self explanatory but a brief explanation is listed below. There is pop-up help (F1) available for each field. Please note that if you press <ESC> the installation will be canceled and any changes will be lost. A. Default Appointment Path & Filename CALTRV's uses the default SIDEKICK PLUS Time Planner File - PERSONAL.APP. If you have renamed your Time Planner file change CALTRV's default here. The format is: d:\PATH\FILENAME.EXT. If you omit drive or path CALTRV will search for the Time Planner file using DOS 3.x defaults : Current Directory, CALTRV's Directory, and Path. You can always override this option with the /C Command Line Option. CALTRV CALendar for TRaVel Documentation Page: 10 B. Default Output Disk File Name CALTRV will send it's output report to a Disk File: PERSONAL.RPT if you specify the /F option on the command line. If you wish to change the file name enter it here. Format is: d:\PATH\FILENAME.EXT. Omit the drive or path if you want the report to go to the default drive and path. You can also specify the file name with the /F command line option to override this default. C. Default Report Type CALTRV offers 3 Report Types - Daily, Weekly, & Monthly You can specify /D for Daily /W for Weekly or /M for Monthly on the command line. If no option is specified this default value will be used. Space/+/-Toggle Switches. D. Default Days/Weeks/Months to Preview CALTRV assumes you want to view the next "n" Days / Weeks / Months by default. "n" is in terms of the report type to the left. You can override this default each time you run CALTRV with the /D,/W,/M parameter. You may change the CALTRV default here. E. Default Screen Colors CALTRV uses 2 Basic Colors Standard Fore/Background and Message Fore/Background. Use the Space/+/- keys to toggle through the color options. The Color Sample Box shows what the current color selections will look like (if saved). F. Print Initialization / Termination Strings CALTRV will send Printer Initialization and Termination Strings when the /P parameter is specified. Enter the control codes appropriate for your printer. To enter a Page Eject enter <CtrlP> <CtrlL>. Only the <CrtlL> will display. You can enter multiple codes. G. Default Print Page Length CALTRV will issue a Page Eject (^L) at the end of each page. CALTRV defaults to 59 lines per page. Enter the number of lines you would like printed on each page. This option controls the size of the Note/Task Box. The main portion of the report will always print. H. Default Daily Start Time CALTRV normally starts "Daily" reports at 8:00. You can change this by +/- 1 Hour in 30 minute increments. CALTRV tries to integrate your appointments intelligently. That is, if you use a start time of 8:00 and you have appointments before 8:00 the appointments will be inserted at the appropriate spot. All other CALTRV CALendar for TRaVel Documentation Page: 11 times will be adjusted to compensate for the inserted time. You can toggle the start time with the Space/+/- keys. I. Default Time Format CALTRV normally prints out times in AM/PM format. If you set SK+ to 24 Hr format then you should also set this flag to 24 Hr. Toggle this field with the Space/+/- keys. J. Default Video Max CALTRV has a command line switch (/V - Max Video) to control the default video mode. You can turn on Max Video (43/50 Lines on EGA/VGA Screens) with the /V switch or toggle the field here with the Space/+/- keys. K. Print Note Option CALTRV will print up to 4096 bytes of note information associated with each appointment. This option can be toggled on with the /N [n] command line switch or you can toggle the field permanently on in this install program. If turned on permanently here you can always limit the note output by specifying /N 1 (or the limit of your choice on the command line.) Toggle this field with the Space/+/- keys. L. Use Line Draw CALTRV normally prints out its reports using standard ASCII characters. If you have a printer that supports the IBM Line Draw Character Set then you can set this option on. CALTRV will use the Line Draw character set in its daily & weekly reports. This option can also be turned on with the /G command line option. M. Default Resident Task Manager File CALTRV will read Task files from Resident TaskManager if you specify the /T option on the command line. If you wish to change the file name enter it here. Format is: d:\PATH\FILENAME.EXT. Please make sure the Task File EXISTS! You can always specify a different file on the command line with/T [Filename]. Resident TaskManager is available separately. N. Print End Times Option CALTRV, by default, will not print the ending times of appointments on it's Weekly report. This allows for longer appointment descriptions. If you need the end times printed toggle this field to "ON". Space/+/- keys toggle this field. VI. ASSOCIATION OF SHAREWARE PROFESSIONALS The owner of WetZoft Applications is a member of the Association of Shareware Professionals (ASP), an organization CALTRV CALendar for TRaVel Documentation Page: 12 formed in April 1987 to strengthen the future of shareware (user- supported software) as an alternative to commercial software. Its members, all of whom are programmers who subscribe to a code of ethics, are committed to the concept of shareware as a method of marketing. ASP wants to make sure that the shareware principle works for you. If you are unable to resolve a shareware-related problem with an ASP member by contacting the member directly, ASP may be able to help. The ASP Ombudsman can help you resolve a dispute or problem with an ASP member, but does not provide technical support for members' products. Please write to the ASP Ombudsman at P.O. Box 5786, Bellevue, WA 98006 or send a Compuserve message via easyplex to ASP Ombudsman 70007,3536 A. The primary goals of the ASP: To inform users about shareware programs and about shareware as a method of distributing and marketing software; To encourage broader distribution of shareware through user groups and disk dealers who agree to identify and explain the nature of shareware; To assist members in marketing their software; To provide a forum through which ASP members may communicate, share ideas, and learn from each other; and To foster a high degree of professionalism among shareware authors by setting programming, marketing, and support standards for ASP members to follow. VII. OTHER PROGRAMS BY WETZOFT APPLICATIONS A. Resident-TaskManager - RTM Resident-TaskManager is a memory-resident program to manages lists of tasks, reminders or ToDo's. Really, this can be anything you want it to be: a general list of things to do, a list of appointments, tasks you've delegated, etc. Resident-TaskManager's most important feature is it's ability to load as a memory-resident program. That means it's available to you whenever you need to use it. And, it only uses about 6K while doing so. Resident-TaskManager has the following features for managing lists: . Multiple lists . Add, Modify, Delete, Repeat . Sorting CALTRV CALendar for TRaVel Documentation Page: 13 . Prioritization . Easy date manipulation . A user-definable field . Audit Files . Simple Printing Resident-TaskManager provides the best combination of memory usage, simplicity, and features for managing small lists of tasks. B. CALRPT CALRPT is a program that produces a nicely formatted calendar report (Screen, Printer, or File) from Sidekick+'s Calendar file without invoking Sidekick+. This is especially helpful in your AUTOEXEC file to show you what is on your Calendar for the next few days. To invoke CALRPT just type CALRPT from the DOS command line or place the command CALRPT somewhere in your AUTOEXEC.BAT file. RTM and CALRPT are available separately on Compuserve in the BORAPP & IBMSYS Forums. VIII. VERSION HISTORY 1.04 09/02/90 . Fixed bug preventing reading of large calendar files . Fixed (Another) bug in repeating appointment routine 1.03 . Update to help protect against corrupted calendar files. There has been a check for, and warning message issued, when a repeating appointment record is not found. If you get this message check your version of SK+ if it is version 1.00 contact Borland Customer Service. 1.02 . Fixed minor bug found in the processing of repeating appointments. The bug occurred when appointments were deleted with SK+'s "delete previous option". This process caused the start date of the appointment to be incorrectly calculated by CALTRV. 1.01 Fixed Monthly Report Problem when no data on 1st day of Month. 1.00 Initial Shareware Release CALTRV CALendar for TRaVel Documentation Page: 14