ProfitPress Mega CDROM2 Shareware Freeware (MSDOS)(1992)(Eng)

home *** CD-ROM | disk | FTP | other *** search

/ ProfitPress Mega CDROM2 …eeware (MSDOS)(1992)(Eng) / ProfitPress-MegaCDROM2.B6I / PROG / PASCAL / STREAM13.ZIP / STREAMS.DOC < prev next >

Wrap

Text File | 1992-05-18 | 38.6 KB | 1,095 lines

STREAMS - TP 6.0/TPW 1.0 unit to supplement TurboVision/ObjectWindows streams Version 1.3. Copyright D.J. Murdoch (1992). DESCRIPTION "Wierd Stream Tricks" might be a good name for this unit. It contains a miscellaneous collection of objects and procedures, all on a theme of adding functionality to the streams in Borland's Turbo Pascal libraries TurboVision and ObjectWindows. LICENSE This unit is *not* public domain code. You may use it for non-profit purposes at no charge if credit is granted, but written permission must be obtained from me for use of this unit in commercial products. A lot of the code in this unit is code that's been made freely available by others, some of it under their copyright, other parts public domain. As far as I know, all code included here may be used under non-commercially for free. See the list of credits at the end for all the (known) authors. This is the second release of the STREAMS unit. There are probably still bugs; I would really appreciate reports of any, or other suggestions for improvement. Please send either one to me at one of the following addresses: dmurdoch@watstat.waterloo.edu (Internet) 71631,122 (Compuserve) DJ Murdoch at Fidonet node 1:221/177.40 D. J. Murdoch 79 John St. W. Waterloo, Ontario, Canada N2L 1B7 SUMMARY Hierarchy TStream (from Objects) TFilter Base type for filters TEncryptFilter Encrypts as it writes; decrypts as it reads TLZWFilter Compresses as it writes; expands as it reads TTextFilter Provides text file interface to stream TLogFilter Provides logging of text file activity TBitFilter Allows bit-oriented I/O TDupFilter Duplicates output, checks for matching input TSequential Filter that doesn't allow Seek TChksumFilter Calculates 8 or 16 bit checksum for reads/writes TCRC16Filter Calculates XMODEM style 16 bit CRC TCRCARCFilter Calculates ARC style 16 bit CRC TCRC32Filter Calculates ZIP & Zmodem style 32 bit CRC TNulStream Eats writes, returns constant on reads TRAMStream Stream in memory TXMSStream Stream in XMS (extended) memory TDOSStream (from Objects) TBufStream (from Objects) TNamedBufStream Buffered file stream that knows its name TTempBufStream Buffered file stream that erases itself when done Procedures & functions: TempStream allocates a temporary stream OvrInitStream like OvrInitEMS, but buffers overlays on a stream May be called several times to buffer different segments on different streams. OvrDetachStream detaches stream from overlay system OvrDisposeStreams detaches all streams from overlay system and disposes of them OvrSizeNeeded Calculates the size needed to load the rest of the segments to a stream OvrLoadAll immediately copies as many overlay segments to the stream as will fit xms_MemAvail returns the number of 1K blocks of XMS memory available xms_MaxAvail returns size in Kb of the largest block of XMS memory CONTENTS 0. Files in archive a list of the files that should accompany this one 1. TFilter a generic object to act as a filter to a stream 2. TEncryptFilter a filter which does simple encryption/decryption 3. TLZWFilter a filter which does LZW compression/decompression 4. TTextFilter a filter to provide the Read/ReadLn/Write/WriteLn interface to a stream 5. TLogFilter a filter to allow logging of activity on text files 6. TBitFilter a filter to allow bit level I/O to a stream 7. TDupFilter a filter to duplicate output, check for duplicate input 8. TSequential a generic filter that can't Seek 9. Checksum/CRC filters: a collection of filters which calculate checksums and CRC values as the data goes by 10. TNulStream a stream which counts data written to it, and which returns a constant if you read 11. TRAMStream a stream which resides entirely in RAM 12. TXMSStream a stream which keeps its data in XMS memory 13. xms_MemAvail and xms_MaxAvail procedures to show how much XMS memory is free 14. TNamedBufStream a buffered file stream which knows its own name 15. TTempBufStream a temporary buffered file stream, which deletes itself when done 16. TempStream a procedure to allocate a temporary stream, in RAM, EMS, or on disk, according to a specified preference 17. OvrInitStream and related procedures procedures to allow overlays to be buffered on any stream or combination of streams 18. Miscellaneous constants and types 19. Release history and credits 0. FILES IN ARCHIVE Streams.doc - this file Streams.pas - main source file for unit Lzwstrea.asm - source for LZW compression Xmsstrm.inc - source for XMS stream Crc16.asm - source for 16 bit CRC Crc32.asm - source for 32 bit CRC Crcarc.asm - source for ARC-style 16 bit CRC Lzwstrea.obj - assembled code for external linking Crc16.obj - " " " " " Crcarc.obj - " " " " " Crc32.obj - " " " " " Demo programs: Encrypt.pas - encryption program, using TEncryptFilter Compress.pas - file compressor, using TLZWFilter Huffman.pas - defines a Huffman encoding filter, using TBitFilter HuffComp.pas - file compressor using THuffmanFilter Logdemo.pas - simple demo of TLogFilter Ovrdemo.pas - simple demo of multiple overlay files ovr1.pas - one overlaid unit ovr2.pas - a second overlaid unit 1. TFilter = object(TStream) "Filters" are programs which take a file as input and produce a new file as output. TFilter is an adaptation of this idea to streams. Every TFilter has a base stream, which can be any kind of stream. Every TFilter is itself a stream, which means you can read and write to it. When you do, it just relays your request to the base stream. One use of this is in the fact that you can make descendants of TFilter which massage the data on the way to and from the Base. Just override the Read and Write (and possibly other) methods, and you can make changes to the data flowing to or from *any* kind of stream. No need for special coding for an TEMSStream, or for a TDOSStream, or whatever. Your code can act on any of them. Examples of things to do are in the Streams unit: encryption (TEncryptFilter) and LZW compression (TLZWFilter). The other main use is to add other kinds of functionality to a stream. You can't use the formatting capabilities of ReadLn and WriteLn with standard streams, but if you use a TTextFilter (see below) you can. FIELDS Base : PStream; TFilter.Base holds the pointer to the base stream. StartOfs : longint; TFilter.StartOfs holds the offset in the base stream of offset 0 in the filter. This allows multiple filters to work on the same stream; one could work at offset 0, another at offset 1000, etc. Just position the base to the desired starting offset before initializing the filter. METHODS Constructor Init(ABase: PStream); TFilter.Init sets Base to point to ABase^, and sets StartOfs to the current position of the base stream. Destructor Done; virtual; If Base is not nil, then TFilter.Done calls Flush, then disposes of the base stream before calling TStream.Done for itself. Function CheckStatus : boolean; virtual; Returns true if status is stOK. If it is, but the base status is not stOK, then it assumes that someone has called a Reset for the filter, so it calls Reset for the base stream. Borland should have made Reset virtual, and this kludge wouldn't have been necessary! Procedure CheckBase; Checks the base stream for an error. If Base^.status is not stOK, then it calls Error with Code=stBaseError and Info=Base^.status. Function GetPos : longint; virtual; Function GetSize : longint; virtual; Procedure Read(var buf; count : word); virtual; Procedure Seek(pos: longint); virtual; Procedure Truncate; virtual; Procedure Write(var buf; count: word); virtual; Procedure Flush; virtual; These methods all call the corresponding method in the base stream. Offsets are translated using StartOfs. Before the call, CheckStatus is called to propagate any Reset to the base; after the call, CheckBase is called to propagate any errors to the filter from the base. 2. TEncryptFilter = object(TFilter) This is a filter which does simple encryption/decryption on the base stream. The encryption method is to XOR each byte with a Random(256) value; the starting RandSeed is the key for the encryption. FIELD key : longint; The key is used as a Randseed replacement value. Randseed itself is left unmodified by Read and Write. METHODS Constructor Init(Akey:longint; ABase:PStream); The value AKey is used as the starting key for byte 0 of the filter. Anything read from ABase is decrypted using this key; anything written to it is encrypted. Procedure Read(var buf; count : word); virtual; Procedure Seek(pos : longint); virtual; Procedure Write(var buf; count: word); virtual; These methods all encrypt/decrypt and update the value of Key to correspond to the new position in the stream. The encryption method uses the same algorithm for encryption as for decryption. TEncryptFilter.Seek is fairly slow, because it updates the Key once for every byte difference between the current position and the new position. Moving backwards is slower, because the update algorithm is written in Pascal, not assembler as is the forward algorithm. 3. TLZWFilter = object(TFilter) This is a filter which does LZW compression as it writes to and decompression as it reads from the base stream. The LZW code is an adaptation of Wilbert van Leijen's implementation of the 12 bit LZW algorithm. It's quite fast, though not as fast as Wilbert's version; it gets slowed down a lot by having to save its state after every Read and Write operation. You're best off writing large chunks to it to take advantage of Wilbert's excellent code. (Historical note: Trying to rewrite this was what inspired me to write FULLDB, a program which allows source level debugging of external .ASM files. -djm) Each TLZWFilter takes over 28700 bytes of memory, because it keeps extensive tables to record the current state. One limitation of the TLZWFilter is that it can only be opened in read or write mode, and Seek cannot be used in write mode. If this doesn't suit your application, you might want to flesh out the demo Huffman encoder (HUFFMAN.PAS), since it does allow random access. FIELDS Mode : word; One of stOpenRead or stOpenWrite; the mode under which this filter was opened. Size : longint; The size of the expanded stream. This is the size that users of the filter will see; if compression is working, it will generally be bigger than Base^.GetSize. Position : longint; This is the position in the expanded stream. Tables : PLZWTables; This is a pointer to the tables used by the compression engine. They're automatically allocated on the heap. METHODS Constructor Init(ABase:PStream; AMode:TOpenMode); Allocates Tables from the heap, and opens the compressor in a mode of either stOpenRead or stOpenWrite. If reading, a signature and record of the uncompressed filesize is read from the base to confirm that it is compressed by LZW, and to prime the Tables. If writing, the signature is written to the stream. Destructor Done; virtual; Flushes all data to the stream, and writes the uncompressed filesize to the head of it before calling TFilter.done. Procedure Flush; virtual; Function GetPos: longint; virtual; Function GetSize:longint; virtual; Procedure Read(var buf; count:word); virtual; Procedure Seek(pos:longint); virtual; Procedure Truncate; virtual; Procedure Write(var buf; count: word); virtual; These methods all override the basic filter methods and compress/decompress the data. They check whether the operation requested can be performed in the current mode, and call Error with Code=stBadMode and Info=Mode if the operation is not supported. Seek is not supported at all in Write mode. In Read mode, it is slow for seeking forwards, and very slow for seeking backwards: it rewinds the file to the start and seeks forward from there by expanding everything. Truncate is not supported in either mode, and always causes a call to Error. Flush may only be called once; it changes Mode to 0, so any further operations will fail. 4. TTextFilter = object(TFilter) This is a filter which provides a Read/ReadLn/Write/WriteLn interface to a stream through its Textfile field. Once the filter is initialized, Textfile acts exactly like a text file in the standard I/O procedures, but reads come from the stream, and writes go to it. All of the standard stream methods work as well, by flushing the Textfile variable first. FIELD Textfile : Text; This is the dummy text file to use in Read/ReadLn/Write/WriteLn. METHODS Constructor Init(ABase:PStream; AName:String); Initializes the filter with base ABase. The name AName is stored as the name in the Textfile variable. Destructor Done; virtual; Closes the TextFile variable to flush any remaining data to the stream. function GetPos : LongInt; virtual; function GetSize : LongInt; virtual; procedure Read(var Buf; Count : Word); virtual; procedure Seek(Pos : LongInt); virtual; procedure Truncate; virtual; procedure Write(var Buf; Count : Word); virtual; Versions of the standard filter functions. 5. TLogFilter = object(TFilter) This filter allows logging of activity on text files to a stream. Logging is done very transparently. Once the TTextFilter is initialized, you call the Log method to start logging a particular text file, and the UnLog method to stop. When logging is in effect, any data read from or written to the text file is copied to the stream. Multiple files may be logged to the same stream. For example, you can log both Input and Output, and keep a record of an interactive session on the stream. It's also possible to log the same file to multiple streams. Just create the different TLogFilter objects, and call their Log methods with the same file as an argument. If you then call Unlog, you must do it in the *reverse* order to the order you called Log, e.g. S1^.log(output); S2^.log(output); S2^.unlog(output); S1^.unlog(output); is the correct order to log and unlog. One detail of the implementation may cause some trouble. The data is logged to the stream at the time it is written to disk by the text file. Since text files are buffered, this may not be the time at which you write to the text file, and multiple text files logged to the same stream may not have all data appearing in the correct order. FIELD LogList : ^Text; This is a pointer to the first text file currently being logged. METHODS Constructor Init(ABase:PStream); Initializes the filter with a LogList of nil. Destructor done; virtual; Stops logging all text files by calling UnLog for each, and closes and disposes of the base stream. Procedure Log(var F:text); Starts logging the text file F. Continues until the UnLog method is called or the file is closed or Assign'd. Function UnLog(var F:text):boolean; Stops logging the text file F. Returns true if successful, false if not. Will fail if an Assign has been done to F, or F has been closed, or F has already been Unlogged, or another stream has started logging F and hasn't been UnLog'd yet. 6. TBitFilter = object(TFilter) This filter allows you to do bit-oriented I/O to a stream, instead of the usual byte-oriented I/O. A typical use might be for a compression scheme: if a word only takes the values 0 or 1, you can use a TBitFilter to be sure that it only takes up one bit of the output file. If you use this filter, you can mix standard byte-oriented I/O (Read, Write) with bit-oriented I/O (GetBit, GetBits, ReadBits, PutBit, PutBits, WriteBits). There's a substantial performance penalty however, if the bytes you write to the stream aren't aligned with the actual bytes in the base stream. One arbitrary choice was made: the order of bits in a byte. This object follows the 80x86 convention of least significant part first, and considers the least significant bit (low bit) to come before the most significant bit (high bit) within a byte. FIELDS BitPos : shortint; Position of stream relative to base file. Negative values signal that the buffer is unchanged from the file, positive values signal that the file needs to be updated. Zero signals an empty buffer. Mask : byte; The mask to use to extract the next bit from the buffer. Buffer : byte; A buffer to hold 8 bits. AtEnd : boolean; This flag is an efficiency hack. A TBitFilter can write a single bit anywhere in a file; this means that it has to read the existing byte before writing a new one. If it's doing a lot of small writes at the end of the file, this can be incredibly slow, because every one of those reads will fail. The AtEnd flag signals that the current position of the stream is the end of the file, and a read isn't necessary. Normally, AtEnd is maintained internally, and you don't need to worry about it. However, if you increase the length of the base stream other than by writes through the TBitFilter, you *must* set AtEnd to false, so that the bit buffer is properly initialized. Calling Flush on the TBitFilter is sufficient to do this, and would probably be a good idea before you fiddled with the base anyways. METHODS Function GetBit : TBit; Type TBit is a 0 or a 1. This function reads a single bit from the stream. Function GetBits(count : byte): longint; This function reads up to 32 bits, and returns them in the longint value. The first bit read ends up in the least significant bit of the result, and bits higher than the count are zeroed. Procedure ReadBits(var buf; count : longint); This procedure reads up to 524288 bits (64K bytes) from the stream into the buffer. Reads are faster when they start on a byte boundary. Only the bytes that are affected by the read will be modified, with the high bits of the last byte zeroed if necessary. For example, if you read fewer than 9 bits into a word variable, the high byte of the word will be left untouched. Procedure PutBit(ABit : TBit); Write one bit to the stream. Procedure PutBits(Abits : longint; count : byte); Writes up to 32 bits to the stream. Since ABits is a value parameter, you can write the value of an expression directly to the stream without storing it in an intermediate variable. Procedure WriteBits(var buf; count : longint); This procedure writes up to 524288 bits (64K bytes) to the stream. Writes are *much* faster if the starting bit is byte aligned. Procedure SeekBit(bitpos:longint); Seek to a particular bit in the stream. Function GetBitPos : longint; Get the current stream position accurate to the nearest bit. Procedure CopyBits(var S:TBitFilter; Count:longint); Like CopyFrom, but for bits: copies Count bits from S. Procedure ByteAlign; Seeks forward to the next byte boundary. If the last byte of the stream is only partially filled, it will be padded with zero bits. Procedure Read(var Buf; Count : Word); virtual; Procedure Write(var Buf; Count : Word); virtual; Procedure Seek(Pos : LongInt); virtual; Procedure Flush; virtual; Implement the standard byte-oriented functions. Note that if the base stream is not byte-aligned at the start or a read/write, they will split each byte between two in the output stream. Procedure PrepareBuffer(ForRead:boolean); Internal method to prepare the buffer for a read or a write. 7. TDupFilter = object(TFilter) A filter which duplicates writes to two base streams, and checks that data read from the two base streams matches. The match test is a virtual method, so a descendant could implement a different test if desired. FIELDS Base2 : PStream; This is a pointer to the second base stream. I/O is done first to Base^, then to Base2^. Startofs2 : Longint; Corresponds to TFilter.StartOfs, but applies to Base2^: gives the offset corresponding to the filter's offset of 0. METHODS constructor Init(ABase, Abase2 : PStream); Sets the two base streams and the start offset variables. destructor Done; virtual; Flushes the filter, then disposes of both bases if they're not nil. function MisMatch(var buf1,buf2; count:word):word; virtual; Checks for a mismatch between the two buffers. Returns the byte number of the mismatch (1 based), or 0 if they test equal. This default method checks for an exact match. procedure Read(var Buf; Count : Word); virtual; Reads from Base into the buffer, then does a corresponding read from Base2 into a local buffer calling MisMatch to check for a mismatch. If one is found, calls the Error method to signal an stMisMatch error, with the Info word equal to the position of the mismatch in the current buffer. Unless a base error occurs, the two bases will be left synchronized at the position following the data just read. procedure Seek(Pos : LongInt); virtual; procedure Truncate; virtual; procedure Write(var Buf; Count : Word); virtual; procedure Flush; virtual; Standard methods applied to both bases. function CheckStatus : Boolean; virtual; Checks the status of the filter, and assures that both bases are okay if status is stOK. procedure CheckBase2; Like TFilter.CheckBase, but operates on base2 and signals stBase2Error. 8. TSequential This is a very simple descendant of TFilter: the only difference is that it signals stUnsupported if the Seek method is called. It's used as a base for the filters below, which can only work sequentially. METHOD procedure Seek(pos:longint); virtual; Signals stUnsupported by calling Error if ever called. 9. Checksum/CRC filters These are four filters, TChkSumFilter, TCRC16Filter, TCRCARCFilter, and TCRC32Filter, which can be used to calculate checksums and cyclic redundancy checks (CRCs) on the stream of data passing through the filter in either reads or writes. All three CRC filters are based on code by a collection of authors: Stephen Satchell, Chuck Forsberg, Mark G. Mendel, R. P. Byrne, J. R. Louvau and probably others. Edwin T. Floyd collected them together and translated them to TASM. The CRC*.ASM files include more comments about sources and usage. The basic calculations are also available in the interfaced procedures UpdateChksum, UpdateCRC16, UpdateCRCARC, UpdateCRC32. See the source code for the calling details. TChkSumFilter = object(TSequential) TChkSumFilter calculates a 16 bit sum of all the bytes read from or written to the stream. TCRC16Filter = object(TSequential) This filter calculates the same 16 bit CRC as used in XModem and its descendants. TCRCARCFilter = object(TSequential) This filter calculates the 16 bit CRC used by ARC. TCRC32Filter = object(TSequential) This filter calculates the 32 bit CRC used by PKZIP and ZModem. FIELDS TChkSumFilter.Chksum : word; The 16 bit sum of all bytes passing through the filter. If an 8 bit checksum is required, get the low byte of Chksum by using Byte(Chksum). TCRC16Filter.CRC16 : word; The XModem-style 16 bit CRC of all bytes passing through the filter. TCRCARCFilter.CRCARC : word; The ARC-style 16 bit CRC of all bytes passing through the filter. TCRC32Filter.CRC32 : longint; The PKZIP and ZModem-style 32 bit CRC of all bytes passing through the filter. Note that the value should be inverted before use (i.e. use "not CRC32" rather than "CRC32") for compatibility with those programs. METHODS constructor TChkSumFilter.Init(ABase : PStream;AChksum:word); constructor TCRC16Filter.Init(ABase : PStream;ACRC16:word); constructor TCRCARCFilter.Init(ABase : PStream;ACRCARC:word); constructor TCRC32Filter.Init(ABase : PStream;ACRC32:word); These constructors all initialize the filter, and set the sum or CRC to the given value. Typically the first three would start with a value of 0; PKZIP and ZModem start the 32 bit CRC with a value of $FFFFFFFF. procedure Read(var Buf; Count : Word); virtual; procedure Write(var Buf; Count : Word); virtual; All four filters override just these two methods. Both update the sum or CRC if the Read/Write is successful. 10. TNulStream = object(TStream) A stream which eats your writes, and returns a constant if you read from it. (Suggested by Stefan Boether.) I can see two uses for this stream. Stefan suggested using it to count bytes: if you're not sure how much space something will take when written out, write it to a TNulStream, and then read the size to find out. I use it differently in the TempStream code: there, it's used to initialize another stream to a fixed value. I just copy as many bytes as I need from a TNulStream. FIELDS position : longint; The current position of the stream. This is increased by both reads and writes. It's also used as the current size of the stream. value : byte; The value which will be used to fill any read request. METHODS Constructor init(Avalue : byte); Initialize the stream with value=Avalue. Destructor done; virtual; Dispose of the stream. Function getpos : longint; virtual; Function getsize : longint; virtual; Procedure read(var buf; count : word); virtual; Procedure seek(pos: longint); virtual; Procedure write(var buf; count: word); virtual; Implement the basic stream functions. 11. TRAMStream = object(TStream) A stream which resides entirely in RAM, either maintaining its own buffer, or using a predefined buffer. The maximum length is 65520 bytes. FIELDS cp : word; The current pointer for the stream. size : word; The current size of the stream. alloc : word; The size of the allocated block of memory. buffer : Pbyte_array; A pointer to the block of memory holding the stream data. OwnMem : Boolean; Indicates whether the stream "owns" the buffer, and should dispose of it in the Done destructor. METHODS Constructor init(Asize : word); Attempt to initialize the stream to a block size of Asize; initial stream size and position are 0. Constructor UseBuf(Abuffer : pointer; Asize : word); Set up the stream using the given buffer; OwnMem is set to false, so that the memory will not be disposed when done. Destructor done; virtual; Dispose of the stream, and if OwnMem is true, the data buffer. Function getpos : longint; virtual; Function getsize : longint; virtual; Procedure read(var buf; count : word); virtual; Procedure seek(pos: longint); virtual; Procedure truncate; virtual; Procedure write(var buf; count: word); virtual; Implement the basic stream functions. 12. TXMSStream = object(TStream) A stream which keeps its data in XMS (extended) memory. FIELDS Handle : word; The handle used by the XMS memory manager for the stream's block of data. MaxBlocks : word; The maximum number of 1K blocks of memory to allocate. BlocksUsed : word; The number of 1K blocks of memory currently allocated. Always allocates at least 1 byte more than Size. Size : longint; The current size of the stream. Position : longint; The current position of the stream. METHODS Constructor init(AMaxBlocks : word); Attempt to initialize the stream to a block size of with the given value for MaxBlocks. The initial stream size and position are 0, and one block is allocated. Destructor done; virtual; Dispose of the stream, and release the XMS memory. Function getpos : longint; virtual; Function getsize : longint; virtual; Procedure read(var buf; count : word); virtual; Procedure seek(pos: longint); virtual; Procedure truncate; virtual; Procedure write(var buf; count: word); virtual; Implement the basic stream functions. Procedure NewBlock; Internal method to increase the stream's allocation by one block. Procedure FreeBlock; Internal method to decrease the stream's allocation by one block. Doesn't check if the allocated size falls below Size. 13. xms_MemAvail and xms_MaxAvail These procedures are analogous to the MemAvail and MaxAvail procedures in the System unit. They report on available XMS memory, in units of 1K blocks. 14. TNamedBufStream = object(TBufStream) A simple descendant of TBufStream which knows its own name. FIELD filename : PString { PChar in TPW }; The name of the stream. METHODS Constructor Init(name:FNameStr;mode:TOpenMode;abufsize:word); Open the file with the given name, and save the name. Destructor Done; virtual; Close the file. 15. TTempBufStream = object(TNamedBufStream) A temporary buffered file stream, which deletes itself when done. METHODS Constructor init(abufsize:word); Create a temporary file with a unique name, in the directory pointed to by the environment varable TEMP or in the current directory, and open it in read/write mode. Destructor done; virtual; Close and delete the temporary file. 16. Function TempStream(InitSize,MaxSize : longint; Preference:TStreamRanking):PStream; This procedure returns a pointer to a temporary stream from a choice of 4, specified in the Preference array. The first stream type listed in the Preference array which can be successfully created with the given sizes will be returned, or Nil if none can be made. ARGUMENTS Initsize : longint; The initial size to allocate to the stream. This many nulls will be written to the stream, and then the position will be set to byte 0. MaxSize : longint; The maximum size to which the stream should be allowed to grow. Preference : TStreamRanking; An array of 4 entries specifying what sort of temporary stream is desired. Supplied constants include: ForSpeed = (RAMStream, EMSStream, XMSStream, FileStream); ForSize = (FileStream,EMSStream, XMSStream, RAMStream); ForSizeInMem = (EMSStream, XMSStream, RAMStream, NoStream); ForOverlays = (EMSStream, XMSStream, FileStream, NoStream); 17. Stream overlay procedures These procedures allow overlays to be buffered on any stream or combination of streams. Some overlays can be loaded into EMS, others kept on disk, and others can be put onto any other available stream. PROCEDURES/FUNCTIONS Procedure OvrInitStream(S:PStream); Copies overlay segment code to S as new segments are loaded, and does reloads from there. You may call OvrInitStream multiple times, and different segments will be buffered on different streams, depending on the order in which they are loaded by the overlay loader. On the first call, an exit handler is installed which will call OvrDisposeStreams upon program termination. Procedure OvrDetachStream(BadS:PStream); Makes sure that the overlay system makes no references to BadS. Call this before disposing of a stream which has been passed to OvrInitStream, or you're very likely to crash. Procedure OvrDisposeStreams; Detaches and disposes of all streams being used by the overlay system. Function OvrSizeNeeded:longint; Returns the additional size required to load any segments which still haven't been loaded to a stream. Function OvrLoadAll:boolean; Forces all overlay segments to be copied into the stream; if successful (true) then no more references to the overlay file will be made. Warning: This function calls OvrClearBuf, so that any overlay files which are already in the regular overlay buffer will need to be reloaded. 18. Miscellaneous constants and types CONSTANTS stBadMode = 1; Error signalled when an operation is not permitted in the current mode. stStreamFail = 2; Error signalled when a stream Init failed. stBaseError = 3; Error signalled by a TFilter when the base stream has an error; the base stream's error number is put in the Info field. stMemError = 4; Not enough memory for operation. stSigError = 5; Problem with LZW file signature. stUsedAll = 6; XMS stream has used all of its allowed blocks. stUnsupported = 7; Operation unsupported in this stream. TSequential signals this error if Seek is called. stBase2Error = 8; Error in second base in a TDupFilter; Info gets the Base2^.Error value. stMisMatch = 9; The two bases don't match on a read. The Info field is set to the position of the mismatch in the current read buffer. BufSize : word = 2048; Buffer size to use when creating a buffered file stream in TempStream. TYPES TOpenMode = $3C00..$3DFF; This is the widest possible range of open modes for a TDOSStream descendant. Values outside this range can cause very serious bugs in programs, since the high byte is used as the DOS service number when the file is opened. PLZWTables = ^TLZWTables; TLZWTables = record ... These tables are used internally to maintain the state of a TLZWFilter. PByte_Array = ^TByte_Array; TByte_Array = array[0..65520] of byte; An array type used as a buffer in several places. TStreamType = (NoStream, RAMStream, EMSStream, XMSStream, FileStream); The types of streams that TempStream can create. TStreamRanking = array[1..NumTypes] of TStreamType; An array giving the order from most preferred to least preferred for a temporary stream. 15. Release history and credits 1.0 - First release, missing LZW. Immediately replaced by 1.1 - First correct release: TFilter, TEncryptFilter, TTextFilter, TLogFilter, TRAMStream, TNamedBufStream, TTempBufStream, TempStream, overlay procedures (my ideas), TLZWFilter (from code by Wilbert van Leijen) 1.2 - TNulStream, TXMSStream added (from Stefan Boether) TBitFilter added (suggestion of Rene Seguin) TFilter.Done calls Flush TRAMStream.UseBuf and OwnMem added. 1.3 - TDupFilter, TSequential, TChksumFilter added (my ideas), TCRC16Filter, TCRCARCFilter, TCRC32Filter and related procedures added (from code by Edwin T. Floyd, Stephen Satchell, Chuck Forsberg, Mark G. Mendel, R. P. Byrne, J. R. Louvau and probably others); TFilter.Flush added; HUFFMAN demo added.