ProfitPress Mega CDROM2 …eeware (MSDOS)(1992)(Eng)/ProfitPress-MegaCDROM2.B6I/MISC/NETWORK/POPML271.ZIP/manual.txt

Text File | 1992-05-23 | 88.8 KB | 1,650 lines

POPmail/PC    - 1 -


POPmail/PC    - 1 -





Table of Contents
1.    Introduction    3
1.1    Help!    3
1.2    Background and Philosophy    4
1.3    Selecting a Host Mail Server    4
2.    The POPmail User Interface    5
2.1    Menu Bar    6
2.2    Status Bar    8
2.3    Dialog boxes    8
2.3.1    Software Buttons    8
2.3.2    Input Boxes    9
2.3.3    Check Boxes    9
2.3.4    Radio Buttons    9
2.3.5    List Box    9
2.4    Editing Text    9
3.    Installation    10
3.1    System Requirements    10
3.2    How to Obtain POPmail    10
3.3    Loading the Clarkson Packet Driver    11
3.4   Configuring POPmail    11
3.4.1    User Name    12
3.4.2    Password    12
3.4.3    Host Computer    12
3.4.4    Microcomputer IP address    13
3.4.5    Subdirectory for Mail    13
3.4.6    Gateways    13
3.4.7    Name Servers    13
3.4.8    Time Zone    13
3.4.9    Language    14
3.4.10    Advanced    14
3.5    Advanced Configuration Parameters    14
3.5.1    Preferred Full Name    15
3.5.2    Net mask    15
3.5.3    Domain request timeout    15
3.5.4    Connect timeout    15
3.5.5    I/O timeout    16
3.5.6    Retransmit timeout    16
3.5.7    Max transmit unit in bytes:  MTU    16
3.5.8    Max segment we can receive:  MAXSEG    16
3.5.9    Most bytes we can receive without ACK    16
3.5.10    POP port    16
3.5.11    Finger port    16
4.  The Composer Window    17
4.1    Sending Mail to Other Users    17
4.2    Sending Mail to a Group    19
4.2.1    Selecting a Predefined Group    19
4.3    About Enclosures    20
4.3.1    Receiving Enclosures from a Macintosh    20
4.3.2    Sending Enclosures to a Macintosh    21
4.3.3    Problems with Exchanging Documents    21
4.3.4    Sending Enclosures    22
4.3.4.1    Sending multiple enclosures    23

5.  The Viewer Window    24
5.1    Fetch Incoming Mail    24
5.2    Paging through the Database    25
5.3    Reply to Incoming Mail    26
5.4    Forwarding Mail    26
6.    Setting Program Preferences    26
7.    Desk Accessories    28
7.1    Calculator    28
7.2    Calendar    28
7.3    ASCII Table    28
7.4    IP Finder    28
7.5    Finger    28
8.    Other Features    29
8.1    Memo Editor    29
8.2    Moving a Window    29
8.3    Resizing a Window    29
8.4    Trace Facility    29
8.5    Program Switches    30
8.6    Overloaded Buttons    31
9.    Summary and Cautions    31
9.1    Acknowledgments    32
10.    Miscellaneous Technical Issues    32
10.1    Using POPmail with Novell    32
10.2    Using POPmail with Windows 3.0    32
11.    POPmail Questions & Answers    34

1.    Introduction
This manual is about POPmail for IBM and compatible microcomputers that run the MS-DOS
operating system.  In this document, for the sake of simplicity, we will often refer to these
computers as IBM╒s or PC╒s.  POPmail is an electronic mail (E-mail) system, written by
microcomputer support staff at the University of Minnesota. With the POPmail program, you
can send and receive E-mail messages locally or to and from large systems on campus and
around the world.  In addition to POPmail for the IBM, we also support an Apple Macintosh
version, although all references to POPmail in this manual will pertain only to the IBM version
unless otherwise specified.

POPmail uses the standard IBM character set to emulate a graphical user interface (GUI).  For
this reason, POPmail runs on a wide range of IBM PCs and compatibles, including the earliest
PCs which contained a monochrome display adapter (with no graphics support).  In other
words, POPmail does not require that you install a special graphics display adapter in your
computer.

With a GUI, you interact with the program by responding to graphical symbols on the
computer screen, rather than by issuing single line commands (as with the MS-DOS operating
system).  Because of its intuitive user interface, POPmail is largely self-explanatory and very
easy-to-use.  If you are familiar with the GUI in Microsoft Windows or the Apple Macintosh
operating system, you will be able to run POPmail without much help from this manual.

We allow free distribution of POPmail to all interested parties provided that our copyright
notices are not altered or removed and you do not charge others for distribution of our
software.

1.1    Help!
If you run into difficulties when installing or using POPmail, you should first contact your
local network administrator.  If you have questions, bug reports, suggestions, or general
comments about POPmail you can send E-mail to us at:

          [e-mail]

or if you prefer paper mail:

          POPmail Project
          University of Minnesota
          Room 125 Shepherd Labs
          Minneapolis, MN 55455
          U.S.A.

In all of your correspondence pertaining to POPmail, please:

          Ñ  Indicate your POPmail version number.
          Ñ  Indicate your operating system and version number (e.g., DOS 3.2).
          Ñ  If possible, send us a diagnostic record of your POPmail session.
              (See the "Trace Facility" section of this manual for further details.)

Additional help information is available in the "POPmail Questions & Answers" section at the
end of this manual.

1.2    Background and Philosophy
To be widely effective, an E-mail system must embody these three qualities: wide connectivity,
ease of use, and reasonable cost.  We designed POPmail with these three goals in mind.

Wide connectivity is crucial because most people don╒t want to use three or four different Email
packages to communicate with colleagues who use different computers.  You can use POPmail
to send and receive E-mail to and from the academic computer center mainframes on campus as
well as between departmental workstations.  Moreover, you can use POPmail to exchange E-
mail with other computers on the worldwide internet (CICNET, NSFNET, and MRNET) and
on BITNET.  Many mainframe computers and workstations have mail programs with wide
connectivity, but often, these E-mail programs are difficult to learn and use.  For this reason,
we developed POPmail to provide wide connectivity in a user-friendly environment.  In
addition, POPmail is free (in the public domain).

POPmail╒s name is derived from Post Office Protocol (POP), the protocol that defines how a
computer can retrieve mail from another computer (which acts as a shared post office or mail-
server).  POPmail uses either the POP2 or POP3 protocol to communicate between POPmail
and a mail server.

1.3    Selecting a Host Mail Server
POPmail requires a host computer to act as a central shared mail server.  Several host options
are available to you.  If you are affiliated with the University of Minnesota, the easiest option is
to sign up for mail-server-only service with the mainframe division of CIS (the University╒s
Computer and Information Services department). For $20 per year, the mainframe division will
provide those in the University community with unlimited access to the mainframe mail-server.
(For further information about this service, you can call CIS Accounts at 612-625-1511.)

If you have access to a Unix-based computer in your department or work group, you may want
to use that machine as your host mail server.  Examples of small Unix hosts include SUN
workstations, NeXT computers, or Apple Macintosh IIs running the A/UX operating system.
Computers of this size should be adequate for servicing around 150 POPmail users.  Because
Unix machines have excellent connectivity to other systems, they are a good choice for a mail
server.  Of course, for full connectivity, any mail server you select must be connected to the
backbone network in order to communicate with the rest of the campus and the world.

Any reliable E-mail system will require a post office machine (or host mail server) to hold mail
that arrives when a user's microcomputer is turned off.  The host mail server should be
available 24 hours a day to receive and store all incoming mail messages until it is convenient
for the user to read them.

Another low-cost option you can consider for a host mail server is to use the University of
Minnesota's MailStop program.  MailStop is a mail-server application that runs on Macintosh
computers.  This server software is designed to service client workstations (either IBM-
compatibles or Macintosh computers) that run POPmail.  MailStop is in the public domain and
is included as part of our overall POPmail package.  This means that MailStop, along with
POPmail, is available from us via anonymous FTP on the internet.  (See the "Configuring
POPmail" section below for details.)

In any case, to use POPmail, you designate one machine as a post office (also known as a POP
server).  Incoming mail is held in your mailbox on the post office server until you use POPmail
on your microcomputer to call for the mail.  This process is similar to having your paper mail
held for you in a P.O. box at the U.S. Post Office.  Like the paper mail user, those who use
POPmail don╒t need to know how the post office business works; they just need to know how
to collect their mail.

Figure 1 is a diagram of a worksite that uses a mainframe computer as the mail server; the
server is connected to the campus-wide backbone network.  The worksite is running POPmail
on both IBM and Macintosh microcomputers.  The IBM computers on the top of the diagram
are connected to the campus backbone network by Ethernet cable and a LANmark Ethernet
telephone Type LDI-410.  (Making a connection to the Ethernet backbone may entail running
wires for the network and setting up a LANmark phone connection.  If you are on the
University of Minnesota phone system and you do not have the wiring and phone in place, call
Telecommunications Services at 612-625-6333.)

Figure 1:  Sample POPmail Setup

2.    The POPmail User Interface

The POPmail screen consists of two full-sized windows.  The Viewer Window is for viewing
messages which have been sent to you.  The Composer Window is used to compose new
messages to send to others.

In addition to POPmail's two full-sized windows, smaller windows, (dialog boxes) pop up
from time to time in response to commands you issue or buttons you click.

2.1    Menu Bar
The very top line of the computer screen contains POPmail's menu bar with six menu labels.
The menu bar looks like this:

             ║   Options   Edit   Group   Memo   Window  Help

The menu bar is the primary mechanism you use to communicate with the POPmail program.
The menus have "pull-down" labels; that is, when you select Edit in the menu bar, a list of
specific editing commands are dropped down from the Edit menu label and displayed in a list.
If one of the commands in a pull-down menu is followed three periods (...), a modal dialog
box (explained later in this section) will be displayed when you select that command.  If a
command in a pull-down menu is not followed by three periods, this means that once you
choose it, the indicated action will occur immediately.

You can use either a mouse or keyboard to select commands.  To use a mouse, click on the
desired menu title to display the pull-down menu. (Use only the left mouse button if your
mouse has more than one button).  Then click on the desired command.  Alternatively, instead
of clicking, you can push the mouse button over a menu title and then continue to hold the
mouse button down while you move the mouse cursor straight down from the menu title to the
desired menu command, and then release the mouse button.  If you decide not to choose a
command, just move the mouse cursor out of the boundaries of the pull-down menu and
release the mouse button.  Then no action will be performed.

To choose menu commands using the keyboard, first pull down the menu.  You do this by
pressing the F10 key to make the menu bar active.  (When the menu bar is active, one menu
title is highlighted.)  If the menu title you want is not the one currently highlighted, use the
arrow keys to move to the right or left along the menu bar, until the menu title you want to
select appears highlighted. (Alternatively, you can just type the first letter of the menu title.)
Then press the <ENTER> key.  This will cause the menu to pull-down (drop-down).  There
also is a hot-key alternative method to pull-down a menu.  Hold the Alt key down while typing
the letter corresponding to the first letter of the menu title you want (e.g., type Alt-G to pull-
down the Group menu). ╩The hot key to pull-down the ║ menu (called the system menu) is
Alt-Spacebar.

Once the menu you want is pulled down, use the up-down arrow keys to highlight the
command you want and press <ENTER> to choose (perform) the highlighted command.  (As a
shortcut:  press the key corresponding to the highlighted letter of the desired command in order
to choose that command.)

Once you choose (perform) a menu command, POPmail will do one of two things:  carry out
the command directly or display a modal dialog box.

The individual items under the pull-down menus are organized as shown in the following table.
Highlighted letters (shown here as capital letters) are used to perform the various short-cuts
described in the previous section and elsewhere in this manual.

Note that the highlighted letter (shown here as a capital letter) associated with each command is
not always the first letter of the command.  In addition, some menu commands are considered
to be so important that they can be activated with a hot key alternative.  These hot keys are also
shown below.

Menu Title    Commands    Hot-key

    ║
        About...
        ----------
        Calculator
        calenDar
        ascii Table
        Video mode
        Ip finder
        Finger
    Options
        pReferences...
        Configure...    Alt-C
        ----------
        pRinter setup...
        Print    Alt-P
        ----------
        Trace    Alt-F10
        ----------
        eXit    Alt-X
    Edit
        Undo
        ----------
        cuT    Shift-Del
        Copy    Ctrl-Ins
        Paste    Shift-Ins
        ----------
        Find...    Ctrl-QF
        Replace...    Ctrl-QA
        search Again    Ctrl-L
        ----------
        cLear composer
    Group
        Make group...
        Select group...    F5
    Memo
        Change Dir...
        ----------
        Open
        New
        Save    F2
        Save As...
    Window
        cLose    Alt-F3
        Resize/move    Ctrl-F5
        Next window    F6
        Zoom
        Tile
        cAscade
        ----------
        Viewer    F7
        Composer    F8
        Show clipboard
    Help
        Contents
        Index    Shift-F1
        Previous topic    Alt-F1
        Help on help


2.2    Status Bar
POPmail's status bar is located across the bottom line of the screen.  The status bar looks like
this:

    F1 Help   Alt-X  Exit     Alt-F  Fetch    F3  Prev Msg     F4  Next Msg     F7  View    F8  Compose

The status bar contains "hot spots."  Hot spots are located wherever words occur in the status
bar.  For example, "F3 Prev Msg" constitutes one hot spot.  Hot spots are separated from each
other by more than one space.   When you click on a hot spot with a mouse, the indicated
function will be carried out.  For example, when you click on the words "F4 Next Msg",
POPmail displays the next message stored in your mail database, and when you click on the
words "F8 Compose", POPmail opens the Composer window, allowing you to compose an
outgoing mail message.

To activate a hot spot without using a mouse, you type a hot-key.  For example, if you press
the F8 function key, POPmail will display the Composer window; and, if you type Alt-X, you
will exit from the POPmail program.

2.3    Dialog boxes
Once you execute a menu command, POPmail will do one of two things:  either carry out the
command immediately or display a dialog box.  If a menu command is followed by three
periods, (e.g., Save As...), the command opens a modal dialog box.  A modal dialog box is
essentially a question-and-answer session which requires you to select choices and fill in the
blanks before POPmail will proceed.  Note that while a modal dialog box is displayed, the
menus and status bar hot spots are inactive.

In order to set options in a dialog box, you use five on-screen gadgets.  These five gadgets or
"controls" are:  radio buttons, check boxes, software buttons, list boxes, and input boxes.
Figure 2 shows a dialog box illustrating the five controls:

Figure 2: Modal Dialog Box

2.3.1    Software Buttons
With a mouse, you choose a software button by moving the cursor pointer over the button and
then clicking the mouse button.  The modal dialog box shown in Figure 2 has two software
buttons: oK and Cancel.  If you choose oK, the choices you select in the dialog box are
instituted.  If you choose Cancel, nothing happens and the dialog box goes away without
instituting any of your changes.

If you don't have a mouse, use the keyboard command equivalents to choose and activate a
button.  Press the <TAB> key consecutively to advance forward through the dialog box until
the button you want to select becomes highlighted and then press the <ENTER> key to choose
that software button.  (Press Shift-<TAB> to move backwards in a dialog box.)  When you
have finished making your choices in a dialog box, type Alt-K (to activate the oK button).  To
cancel, type the ESC key.

2.3.2    Input Boxes
Input boxes let you enter text.  For example, in one of POPmail's dialog boxes, POPmail
requires that you enter your full name in an input box. If you type in more text than will fit
within the input box, the text will scroll automatically.

2.3.3    Check Boxes
Some dialog boxes also have check boxes.  An X inside a square indicates that that option is
set ON.  An empty box indicates it's OFF.  You set a check box to the ON- or OFF-state by
clicking on the square or by clicking on the text immediately to the right of the square.  (If you
don't have a mouse, press the <TAB> key one or more times until the check box is highlighted
and then press the Spacebar.  Alternatively, you can turn a check box ON or OFF (toggling) by
holding the Alt key down while typing the highlighted letter (if one is provided).  Any number
of check boxes can be checked ON at any one time.

If several check boxes are grouped together, pressing the <TAB> moves to the next group and
once the group is selected, you can use the up-down arrow keys to highlight the check box you
want within the group, and then press the Spacebar to turn the individual check box ON or
OFF.  On monochrome monitors, POPMail indicates the highlighted check box or group of
check boxes by placing a chevron symbol (╚) next to it.  When you press <TAB>, the ╚
symbol moves to the next check box or group of check boxes.

2.3.4    Radio Buttons
Radio buttons work just like check boxes, except that one and only one radio button in a group
is ON at any one time.  Since only one radio button in a group can be ON at a time, any other
button in the group which was previously turned on is turned OFF automatically when you
select another.

2.3.5    List Box
A list box lets you scroll through a list of choices.  You activate a list box by clicking in it or by
pressing the <TAB> until it's highlighted.  Once a list box is active, you can use the mouse to
manipulate the scroll bar (or if you don't have a mouse, press the up-down arrow keys to move
within the list).

(Note:  Inside a dialog box, any item with a highlighted letter indicates that that particular
gadget can be accessed by holding the ALT key down while typing that highlighted letter.)

2.4    Editing Text
POPmail contains basic word-processing features.  Anywhere in POPmail, the <DEL> key
deletes text forward from the current cursor position, and the <backspace> key deletes text to
the left of the cursor position.  Except within a modal dialog box, you can use the mouse to
drag over (select) text to be cut or copied. Without a mouse, you select text by holding the Shift
key down and using the arrow keys to expand the amount of text selected, starting with the
current cursor position.  Once the text is selected (highlighted) you can cut the selected text, by
selecting Cut from the Edit menu.  Likewise, to copy selected text, select Copy from the Edit
menu.  Once selected text has been cut or copied, it is stored temporarily in POPmail's
clipboard.  To paste the text contained in the clipboard, position the cursor in the desired
location and then select Paste from the Edit menu.

POPmail does not support underlined, bold, or italic text.

Users who are familiar with WordStar are advised that the POPmail editor also supports the
WordStar Control Key sequences for cursor movement (Ctrl-E = Line Up; Ctrl-R = Page Up;
Ctrl-F = Next Word; Ctrl-Y = Delete Line, etc.).


3.    Installation

3.1    System Requirements
In order to run POPmail, your microcomputer must be connected to a local area network
(LAN).  Usually, the LAN will be connected to the campus backbone network, allowing you
to send and receive mail outside your local work group.

In order for your microcomputer to operate on the LAN, you must have a network adapter card
installed in your microcomputer.  In order to run POPmail, your network adapter card must be
one of those supported by the Clarkson packet drivers, as explained in the following sections
of this manual.  (Each Clarkson packet driver is a specialized piece of software designed to talk
to a specific type of network adapter card.  For a list of network adapter cards currently
supported by the Clarkson Packet Drivers, please consult our accompanying documentation
entitled "Installing the Clarkson Packet Drivers".)

POPmail runs under DOS version 3.0 or greater and requires 640K of RAM.  POPmail was
designed to run on a wide range of IBM PCs and compatibles, including the earliest PCs which
contained only a monochrome display adapter (no graphics support).

A Microsoft-compatible mouse is helpful but optional.  You must load mouse driver software
into your system before running POPmail.  Note also that if your mouse contains more than
one mouse button, you will be using only the left mouse button when running POPmail.

3.2    How to Obtain POPmail
POPmail software consists of two components: a Clarkson Packet driver (matched to your
microcomputer's network adapter card) and the POPmail program software itself.  All the
software components and their manuals are included on the POPmail diskette, or they may be
obtained on the internet through anonymous FTP from

    boombox.micro.umn.edu

Look in the UNIX directory called

    /pub/POPmail

3.3    Loading the Clarkson Packet Driver
You install the appropriate Clarkson packet driver according to the installation instructions
contained in our manual entitled "Installing the Clarkson Packet Drivers."  In order to run
POPmail, the appropriate Clarkson packet driver must be loaded into RAM (random-access
memory) each time you boot-up your computer.  To do this, you first run the appropriate
packet driver by typing the packet driver name, followed by the necessary parameters, as
described in the manual.

After you have installed the appropriate packet driver, copy the POPMAIL.EXE file into a
directory.  If you want to be able to run POPmail from any directory, modify the PATH
statement in your AUTOEXEC.BAT file to include the directory containing POPMAIL.EXE.
Then, you can run the POPmail program by typing:  "POPMAIL" at the DOS prompt.

The following two command lines represent an example of the steps needed to load the packet
driver and start POPmail (of course, the specific packet driver and parameters will depend on
your configuration).  Type each line following the command prompt and end each line by
pressing the <ENTER> key:

     3C523 0x60 0x3 0x300
     POPMAIL

At this point you are running POPmail.  As long as you do not turn the power off to your
computer, you can quit POPmail and do other things and then start POPmail again without re-
loading the Clarkson packet driver.  Also if you already have the packet driver loaded for other
programs like FTP, Telnet, or tn3270, you do not need to re-load the packet driver before
running POPmail.

3.4   Configuring POPmail
When you use POPmail for the first time, you need to set up POPmail parameters.  POPmail
needs these configuration parameters in order to identify you and your computer on the
network.  When you run POPmail for the first time, POPmail will display the "Configure"
dialog box shown in Figure 3A, allowing you to enter the required parameters. You must enter
all of the parameters, according to the instructions which follow.  (Consult your network
administrator for the correct parameter information.)  Space for entering multiple name servers
and gateways is provided, but only one of each is required.  You will not need to enter
parameter information during subsequent POPmail sessions, because POPmail will
permanently remember the parameters you have entered.  You can modify your configuration
settings at any time by selecting Configure from the Options pull-down menu.



Figure 3A:  First Time Users

Initially, the User Name line will be empty and highlighted.  Since it is already selected, you
can simply type in your User Name.  To enter or edit Password, Host computer, or any of the
other parameters in the Configure dialog box, use the <TAB> key (or Up and Down arrow
keys) to advance to the appropriate parameter field.  Then enter the appropriate parameter
information. (As a short-cut you can select any of the parameter names by holding down the
Alt key while typing the highlighted character in that parameter name, e.g., type Alt-P to select
the Password parameter name.  Remember: In general, we use a capital letter to designate a
highlighted letter within a dialog box.)

A brief description of each of the parameters follows:

3.4.1    User Name
Initially, the User Name line will be empty and highlighted.  Since it is already selected, you
can simply type in your User Name.  This User Name corresponds to the User Name
(sometimes called the account name) that has been assigned to you for use on the host mail
server.  Generally, the host mail server will be a Unix machine, and by convention, Unix
machines use all lower-case letters, so be careful not to capitalize letters in your user name
when they shouldn't be.

3.4.2    Password
The Password is the key word that the host mail server uses to validate your user name.  The
person who sets up your account on the host mail server will assign you this password.
Warning:  Be sure to type in your password exactly as it was assigned, (again, be careful of
upper- and lower-case considerations).  Note that when you enter your password in the
Configure dialog box, you will not see your actual password displayed on the screen.  This is a
security feature of the POPmail program, since it prevents people from viewing your password
as you enter it.

3.4.3    Host Computer
This is the name or IP address of the computer you are using as a host mail server for running
POPmail.  Every computer on the TCP/IP (world-wide) network has a unique numerical
address called an IP address.  The IP address looks something like 128.101.63.1.  In much the
same way as the post office uses home addresses to distinguish one residence from another,
the network uses IP addresses to distinguish one computer from another when delivering
electronic mail.  In addition to having an IP address, each computer on the network often has a
name, e.g., vx.acs.umn.edu.  Although both the IP address and name are unique for each
computer, they don't have equal status.  Specifying the host mail server's IP address will
always work to identify the host computer successfully, while specifying its name identifier
may not always work.  You can use either the host computer name or IP address.  The
advantage in using the name, although it is less reliable on the network, is that it's easier to
remember a name than it is to remember a series of numbers.  If you use a name, the name will
be converted to an IP address by a computer on the network called a name server.

3.4.4    Microcomputer IP address
This is the IP address of your individual microcomputer or workstation.  See your network
administrator for a microcomputer IP address assignment.

3.4.5    Subdirectory for Mail
POPmail writes a copy of each message you receive to a file on your personal computer, one
file per message.  This parameter specifies the drive and subdirectory for POPmail to use when
saving your messages.  If this subdirectory does not exist on your disk, POPmail will ask you
if you would like to create a new subdirectory when you exit the dialog box.  (Note: POPmail
will also ask you if you would like to create the subdirectories called ENCL and ENCL\RSRC
within your subdirectory.  See the section called "About Enclosures" for more details.)

3.4.6    Gateways
A gateway is a device which gives your computer access to the outside world, by transferring
information from one type of network to another.  If you want to use POPmail to send
messages beyond your local area network (LAN), you must specify the IP address of one or
more gateways to which your LAN has access.  If more than one gateway is available to you, it
is to your advantage to enter more than one, increasing the chance that you will find one that is
up and running when POPmail needs it.  A gateway moves your POPmail information off your
LAN and routes it on to the outside world.  Contact your network administrator for the IP
address of gateways accessible to your LAN.

3.4.7    Name Servers
As discussed earlier in the "Host Computer" section above, a name server converts a host mail
server name into an IP address.  You type in the IP address of your name server in this
parameter field (see your network administrator for the value to enter). If more than one name
server is available to you, it is to your advantage to enter more than one IP address, increasing
the chance that you will find a name server that is up and running when POPmail needs it.

3.4.8    Time Zone
Figure 3B shows the Time Zone List Box which pops up when Figure 3A's Time Zone
software button is activated.  The Time Zone List Box allows you to indicate your time zone, if
you are not located within the Central Standard Time zone of the United States, which is the
default setting.  To indicate your time zone, use the scroll arrows or the up-down arrow keys,
to select your time zone from the list.  Once your time zone is highlighted, type the <ENTER>
key or click on the oK button.

Figure 3B: Time Zone List Box

3.4.9    Language
Figure 3C shows the Language List Box which pops up when Figure 3A's Language software
button is activated.  The Language List Box allows you to indicate the human language (e.g.,
Swedish, English, etc.) you use to communicate.  To indicate your chosen language, use the
scroll arrows or the up-down arrow keys, to select your language from the list.  Once your
preferred language is highlighted, type the <ENTER> key or click on the oK button.

Figure 3C: Language List Box

3.4.10    Advanced
Most users will not have an occasion to use the Advanced... software button in the Configure
dialog box.  POPmail has default parameters which are appropriate for most network
environments.  However, if you encounter problems in installing or using POPmail on your
network, consult your network administrator to see whether it might be helpful to alter the
Advanced configuration parameters described in the next section.

When you have finished entering the parameters, click on the oK button to have POPmail save
your changes to the configuration.  If you decide you don't want your parameter changes to be
saved, click on the Cancel button.


3.5    Advanced Configuration Parameters
The Advanced Configuration Parameters dialog box is designed to provide network
administrators with more advanced and specialized configuration parameters, in case they are
needed to install POPmail on network environments which have unique or unusual
requirements (see Figure 4).  Network administrators can set these specialized parameters by
activating the Advanced... software button found within the Configure dialog box.  POPmail
has appropriate default settings for these advanced parameters, which in our experience are
suitable for most networks.  However, if you encounter problems in installing or using
POPmail on your network, your network administrator may need to alter the Advanced
configuration parameters.

When the Advanced... software button is activated, the following advanced configuration
parameters are displayed:

Figure 4:  Advanced Configuration Parameters

3.5.1    Preferred Full Name
This is your full name in real life, e.g. John A. Doe.  POPmail gets your full name from the
SMTP server so you should be able to leave this field blank.  You can use this field to override
the information returned by the server.

3.5.2    Net mask
The net mask parameter has to do with how your local area network is configured and
connected to the backbone network at your worksite.  Your network administrator will know
the correct value to enter here.  Most sites are configured to use a net mask of 255.255.255.0
(the default value).

3.5.3    Domain request timeout
This parameter sets the maximum number of seconds allowed for the name server on the
network to convert your computer's host mail server name to an IP address.  The default value
is set to 20 seconds.  If an error dialog box is displayed stating "Domain name request failed"
when trying to send or fetch messages, you may need to increase this value.

3.5.4    Connect timeout
When POPmail attempts to connect to the host mail server, this parameter sets the maximum
number of seconds POPmail will wait before the host mail server will acknowledge your
attempt to connect.  The default value of 20 seconds is sufficient for most mail servers.  If an
error dialog box is displayed stating "Open failed" when trying to send or fetch messages, try
increasing this value.

3.5.5    I/O timeout
This parameter sets the maximum time allowed for POPmail to send and receive data from your
computer to the host mail server.  With the default value of 20 seconds, POPmail will wait 20
seconds for a response from the host mail server.  If a response does not come through within
20 seconds, POPmail will present an error dialog box stating "error reading from network" or
"error writing to network" and will abort the Send or Fetch operation in progress.  Again, if
your host mail server is slow and frequently times out, you may need to increase this parameter
value.

3.5.6    Retransmit timeout
This parameter sets the length of time in seconds POPmail will wait before retransmitting a
packet whose earlier transmission was not acknowledged.  The default is one second.

3.5.7    Max transmit unit in bytes:  MTU
This parameter specifies the maximum allowable packet size that POPmail will transmit in
bytes.  The default is 1024 (1K) bytes.

3.5.8    Max segment we can receive:  MAXSEG
This parameter specifies the maximum size packet in bytes that a host mail server is allowed to
transmit to POPmail.  The default is 1024 (1K) bytes.

3.5.9    Most bytes we can receive without ACK
This parameter sets the maximum send/receive TCP window size in bytes.  The default is 2048
(2K) bytes.

3.5.10    POP port
This parameter specifies the port POPmail will use to connect with the POP server.  The default
value is port 109.  This is the default POP2 port.  If you are using a mail server that uses the
POP3 protocol you will probably need to change this value to 110.

3.5.11    Finger port
This parameter sets the port the Finger command will use when using the Finger desk
accessory.  The default value is port 79.


4.  The Composer Window

4.1    Sending Mail to Other Users
Using POPmail to send an electronic mail message is easy.  Just follow these steps:

1.    Make the Composer window the active window.
2.    Specify the recipient of the message.
3.    Specify recipients of carbon copies, if any.
4.    Specify the subject of the message.
5.    Type the message itself.
6.    Send the message.

Make the Composer window the active window.
Press the F8 function key.  This will make the Composer window active.  (The active window
always appears in front of all other windows.)

Specify Recipient.
In order to send a letter to someone through the United States mail, you must know their name
and address.  Likewise, to send an electronic mail message to someone, you need to know
their electronic name and address.  This is commonly called their E-mail address.

You place the recipient╒s E-mail address into the POPmail field labeled To.  (Initially, the
cursor is positioned in the To field).  In order to move the cursor between fields, you press the
<TAB> key or simply click in the desired field with your mouse.  Then type the recipient's
E-mail address.  Figure 5 shows a sample message in the Composer window.

Figure 5:  POPmail screen with the Composer window visible
      ║    Options    Edit     Group    Memo    Window

         Alt-X  Exit     Alt-F  Fetch     F3  Prev Msg     F4  Next Msg      F7  View     F8  Compose

In this example, the message is being sent simultaneously to two people.  One recipient is
someone whose E-Mail address is:

    [e-mail]

(This address is read: kathy at boombox dot micro dot umn dot edu.  The address denotes a
person whose E-mail user-name is kathy.  Kathy gets mail at a computer called
boombox.micro.umn.edu on the Internet.)

To send the same message to more than one person, enter additional E-mail addresses
separated one from the other by one or more spaces (a comma is optional).  The message in
Figure 5 is also being sent to:

    [e-mail]

(a recipient named ellen who gets her mail at a computer called UMNMOR on BITNET).  You
can send the same message simultaneously to as many recipients as you wish.

Specify Carbon Copies.
With POPmail you can send a message directly to some people and as a carbon copy to others.
After specifying the primary recipients of your message in the To field, press the <TAB> key
once to enter the CC field where you can enter E-mail addresses of the people who are to
receive ╥carbon copies╙ of the message.  To send carbon copies to more than one person, enter
additional E-mail addresses separated by one or more spaces (a comma is optional).  Those
who receive messages see E-mail addresses of both the primary and the carbon copy recipients
of the message.  If you don╒t want to send carbon copies of your message, you may leave the
CC field blank.

Specify Subject.
You must fill in the Subject field.  To move to this field, press the <TAB> key.  Once your
cursor is in the field, type a succinct one-line description of your message.  Be courteous and
wise; use this field to describe the contents of your message briefly but clearly.  The subject of
our sample message is ╥Next Committee Meeting╙.

Type the Message.
The big field just below the Subject field is the Message field.  This is where you will enter the
body of your message.  To move the cursor to this field, press the <TAB> key again.  Once
your cursor is in the field, type your message.  Editing text here is easy.  You can use the
arrow keys to move around in the text and use the <backspace> and <DEL> keys to delete text.
The current version of POPmail support s word-wrapping; therefore, you only need to type the
<ENTER> key at the end of paragraphs.  You can also use the WordStar control key
sequences for cursor movement.  POPmail uses a simple version of a word processor and has
some limitations.  For example, you cannot make text bold, italic or underlined.

Send Mail.
When you are done typing your message click on the Send button.  (Alternatively, type Alt-S;
or press the <TAB> key until the Send button is highlighted and then press <ENTER>).  The
message will be sent to the recipients you specified in the To and CC fields.  When the
message has been sent to the mail-server, a confirmation dialog box is displayed.  Click on the
OK button or press the <ENTER> key to clear the confirmation box.

4.2    Sending Mail to a Group
Sending POPmail to a group is as easy as sending a message to one person.  With POPmail
you can keep group lists.  A group is simply a list of recipients (E-mail addresses) that have
been given a one-word alias (identifier).  For example, you could create a group called Marx
composed of these three E-mail addresses:

    [e-mail]
    [e-mail]
    [e-mail]

To create a group alias name, select the "Make Group..." menu item from the Group pull down
menu.  An edit box with scroll bars will appear to allow you to enter the desired alias name and
the recipients you want to include in the group.  When you define a Group, you must type the
group name first.  In our example, shown in Figure 6 below, committee1 and committee2 are
group names.  The group names are followed by the user names of the members of the group.
Within a group, each user name is separated from the next by one or more spaces (commas are
optional).  When you are finished entering the user names for one group, type the <ENTER>
key twice before entering information to define another group.  (Groups must be separated by a
blank line.)

Figure 6:  Making Groups

When you have finished making groups, click on the oK button to save your changes.

4.2.1    Selecting a Predefined Group
To send mail to a group you have already defined, select the "Select Group..." menu item from
the "Group" pull down menu.  A list box with a vertical scroll bar will appear, giving you a list
of all your group alias names, as shown in Figure 7.  Select the group name by typing the up
and down arrow keys until the desired group name becomes highlighted.  Then click on the
Select button to select that group.  The "To" field of the Composer window will be filled in
automatically with the full E-mail addresses of the members of the group; the group alias name
itself does not appear in the To box.

Figure 7:  Select  a Predefined Group

4.3    About Enclosures
POPmail allows you to enclose files, such as an Excel chart or worksheet, or a memo created
with Microsoft Word, with each mail message.  Each recipient of your message receives an
exact copy of the enclosed files.  (Of course, to receive an enclosure from POPmail, the
recipient must be running POPmail/PC or POPmail/Macintosh.)  Enclosed files appear on the
recipient's disk with their original contents.  Your recipient can peruse and modify the file and,
if desired, return it to you as another POPmail enclosure.

When the POPmail program receives a message with an enclosed file, the document is stored
on your disk.  POPmail automatically stores the enclosure in a subdirectory named ENCL of
the directory you specify for mail (see Configuring POPmail).  For example, if you specify the
C:\POPMAIL\MAIL directory for incoming mail, POPmail places your enclosures in the
directory C:\POPMAIL\MAIL\ENCL.

Since enclosures are regular files, you can treat them as you would any other file; that is, if
someone sends you an enclosure containing an executable program, you can run the program
on your machine as well. In addition, an IBM enclosure containing graphics, italic or bold
characters, or spreadsheets, will retain all its original characteristics.  In short, sending IBM
files as enclosures is really no different than transferring files from one machine to another
using a diskette.

4.3.1    Receiving Enclosures from a Macintosh
Macintosh files are somewhat more complicated than IBM files.  First, Macintosh files can
have longer and more complicated file names, so if necessary, POPmail/PC will alter the
original Macintosh file name in order to comply with DOS file name requirements.  Second,
Macintosh files are divided into one or two forks (parts).  Part One, called the "data fork," is
completely equivalent to a data file on a DOS computer. Part Two, if present, is called the
"resource fork."  The resource fork contains special Macintosh-only information.  If an
enclosure is coming from a Macintosh, POPmail will store the data fork of the document in the
subdirectory called ENCL.  If the document also contains a resource fork, the resource fork
portion of the document will be stored in a subdirectory of ENCL called RSRC.  For example,
if someone sends you a Macintosh HyperCard stack called "French," POPmail/PC will divide
this incoming Macintosh document into two parts.  Part One the data fork, would have the
name:

    C:\POPMAIL\MAIL\ENCL\FRENCH

Part 2 (the resource fork), would have the name:

    C:\POPMAIL\MAIL\ENCL\RSRC\FRENCH

Actually, the information contained in the resource fork is useless to the IBM user; however, if
someone sends you a HyperCard stack, you may want to pass it on to another Macintosh user
without losing any information.  That is why POPmail saves the resource information on the
PC even though PCs don't have any way of using Macintosh-style resources.

4.3.2    Sending Enclosures to a Macintosh
It is possible to send enclosure files to a Macintosh, as well as receive them.  In fact, many of
the newer applications, such as Microsoft Excel, have compatible data formats.  They achieve
this by using only the data fork on the Macintosh and storing the data in compatible formats.

In general, if you are creating files on the IBM for later transmission to a Macintosh via
POPmail, you must be careful to assign the correct file extension to your file name.  The
Macintosh then will be able to assign the proper system icon, etc. to the IBM file when
received.  For example, if you are using Excel on an IBM and want to send the Excel
spreadsheet to a Macintosh user, your file name must have a file name extension of .XLS.  The
recipient will be able to receive and modify the spreadsheet with no problem, and then send the
modified spreadsheet back to you.

Here are other important file extensions to employ when sending IBM files to a Macintosh:

      DOS EXT. Mac Application      Mac Document Type
      ====     =========            ===========
     .XLS      MS Excel 2.2         spreadsheet
     .WKS      MS Excel 2.2         spreadsheet
     .WK1      MS Excel 2.2         spreadsheet
     .PAS      Turbo Pascal 1.1     program source
     .TXT      MacWrite II          ASCII text
     .BAT      MacWrite II          ASCII text
     .C        MS Word 4.0          ASCII text
     .CPP      MS Word 4.0          ASCII text
     .DOC      MS Word 4.0          internal
     .RTF      MS Word 4.0          RTF

4.3.3    Problems with Exchanging Documents
Those who exchange documents with others (via POPmail or even floppy disk) using different
versions of the same software soon learn that they cannot always save, open, read, or retrieve
documents in the usual manner.  New versions of the software can usually open or read
documents created with older versions, but older versions do not recognize documents created
with newer versions.  However, newer versions of the software usually are backwardly
compatible in that they contain an option for reading and writing documents in the old
(obsolete) formats.

Exchanging computer documents is generally straightforward when you and the recipient use
exactly the same version of the same software; for example, when you both use WordPerfect
5.1.  However, even in this scenario, if the recipient does not have the font you used to create
the document, they probably will not be able to see the document as you intend it to be
reproduced - either on the screen or on a printer.

Whenever Microsoft Word users want to exchange documents but are unsure of the recipient's
software, they should save the document as an RTF (rich text format) document.  Documents
saved in this manner are compatible with all versions of Word on the IBM and the Mac, as well
as with some other word processing programs.  Word 5.0 users will see the RTF document's
name show up in the Transfer/Load menu if the document's name ends in .DOC.  If the
document's name does not end in .DOC, Word 5.0 users must type in its name to load the
document.  The newer Word 5.5 is more flexible; it has an option that lets you view a list of all
documents regardless of their names.

Some software comes with built-in file converters.  For example, Microsoft Word for
Windows 2.0 includes converters for several word processing packages, such as Word for
DOS, Word for Macintosh, Windows Write, WordPerfect 5.1, and WordPerfect 4.2.  When
you install Word for Windows this conversion feature is automatically copied to your working
disk.  Not all software makes using its conversion features so easy to use.  Some software
requires that you follow special installation instructions to use their converters.

Finally, keep in mind that when you E-mail large documents or multiple enclosures, you can
bog down a network.  To avoid congestion, consider these strategies: send only one enclosure
per mail message; break up large documents into smaller documents; and mail your documents
during off-peak hours.

As you can see, enclosing E-mail documents is not always straightforward.  The less you
know about the recipient's hardware and software setup, the more likely you are to run into
unforeseen problems.

4.3.4    Sending Enclosures
When sending a message, it is often desirable to enclose another file within your message.  For
example, you may want to send a message notifying others of an upcoming committee
meeting, and enclose a copy of a map indicating directions to the meeting site.  If you push the
"Enclose..." button in the Composer window shown in Figure 5, POPmail will display the
modal dialog box shown in Figure 8.

Figure 8: Choose file to enclose Dialog Box

The list displayed in Figure 8 is simply a list of all the files contained on your disk.  The
information at the bottom is provided to give you further information about the file you are
proposing to select as an enclosure.  This helpful information includes: drive, path, and file
name information, the file size in bytes, and the date and time the file was last modified.  To
select a document to be sent with the current outgoing message, click on the file name desired
and then click on the oK button.  At this point, POPmail returns you to the Composer window.
The enclosure file name will be displayed on the bottom of the Composer window (on the
window frame) to remind you that you have selected an enclosure.

If you hold down the shift key while you push the "Enclose..." button in the Composer
window shown in Figure 5,  you will invoke a dialog box identical to that shown in Figure 8,
except that the dialog box will be retitled as "Choose TEXT file to add to message".  You can
then choose an ASCII text file that will be appended to your message body when the message
is sent.  You can use this feature to send ASCII text files to others who are not using POPmail
and cannot accept BINHEXed enclosures (the normal method POPmail uses to send
enclosures).

4.3.4.1    Sending multiple enclosures
If you select the Enclose... button from the Composer window after you have already selected
one enclosure, you will see the dialog box shown in Figure 9.

Figure 9: Add/Remove Enclosures Dialog Box


To add additional files to POPmail's enclosure list for the current outgoing message, click on
the "Add..." button.  Then POPmail will display the modal dialog box called "Choose file to
enclose" (Figure 8) on top of the Add/Remove Enclosures Dialog Box (Figure 9).

For each enclosure you wish to send, repeat this sequence, choosing one file at a time, until
you have chosen all the desired enclosures.  If you find that you have selected an incorrect file,
you can click on (highlight) the incorrect file name in the list shown in the Add/Remove
Enclosures dialog box (Figure 9) and then delete it by clicking on the Remove button.  When
your list of enclosures is complete and correct, click on the Done button in the Add/Remove
Enclosures Dialog Box, and POPmail will return you to the Composer window.

Note:  If you hold down the shift key while you push the "Add..." button in the Add/Remove
Enclosures Dialog Box (Figure 9), you can then choose an ASCII text file that will be
appended to your message body when the message is sent.  You can use this feature to send
ASCII text files to others who are not using POPmail and cannot accept BINHEXed enclosures
(the normal method POPmail uses to send enclosures).  File names which appear in upper case
letters in the list box shown in Figure 9 will be sent as BINHEXed enclosures.  File names
which appear in lower case in the list box shown in Figure 9 are ASCII text files which
POPmail will append to your outgoing message.

5.  The Viewer Window
5.1    Fetch Incoming Mail
Your incoming mail is held for you at the post-office server until you fetch it. When you fetch
incoming mail, each message is moved from the mail server to the POPmail subdirectory you
have specified.  Incoming messages remain in your database until you explicitly discard them.

To retrieve your new messages, click the Fetch button on the Viewer window (Figure 10
below).  (No matter which window is currently active, you can type Alt-F to make the Viewer
window active and Fetch your mail.)  POPmail will present you with a dialog box to inform
you whether or not you have mail.  Then POPmail will display the first new message in the
Viewer window.


Figure 10: POPmail screen with the Viewer window visible
  ║   Options   Edit    Group   Memo   Window

  Alt-X  Exit     Alt-F  Fetch     F3  Prev Msg     F4  Next Msg      F7  View     F8  Compose


If you are connected to a printer, you can print the message by selecting Print from the File pull
down menu.  If you want to delete the message click on the Delete button in the Viewer
window.  If you don╒t delete the message, it will remain in the database.

5.2    Paging through the Database
Messages are stored in the database in the order they were received.  Each new message is
stacked on top of its predecessor, just like file cards on a stack.  To move backwards in the
database (view the previous message), press the F3 function key.  To move to the next
message in the stack, press the F4 function key.

If you save a copy of your outgoing messages (specified in the Preferences dialog box shown
in Figure 11) from the Options pull-down menu, each outgoing message will be stored in order
at the end of your POPmail database.

Each incoming message is saved to a file on your disk in the subdirectory you specify in the
Configure dialog box (see Figure 3A). The name of each file is stored near the end of the To:
field along with the complete SMTP header.  (More advanced users may wish to scroll down
the To: field to view or retrieve this optional information.  This feature is useful because
POPmail will only display the first 45K of the message body.  If the message is larger than
45K in size, you would want to know the file name of the message so that you could retrieve it
from disk and view it with some other word-processing program capable of reading arbitrarily
large files.)

5.3    Reply to Incoming Mail
One important difference between the Viewer window and the Composer window shown
earlier in Figure 5 is that the Viewer window includes a REPLY button.  The Reply button
allows you to respond to an incoming message quickly, since POPmail automatically takes the
Subject field and From field information from the original message and fills it into the Subject
field and To field in the Composer window for your reply.  When you are finished typing your
reply, you click the Send button to send your message.

5.4    Forwarding Mail
If you want to forward the message displayed in the Viewer window on to another user, click
on the Forward button found in the Viewer window (Figure 10).  POPmail will move the
message into a Composer window, and fill in all necessary information automatically.  The
Composer will be filled in as follows: the subject field will be prefixed with the text
"Forwarded->" and the text in the body will be prefixed by a line indicating who wrote and
sent the original message.  All you have to do is enter the appropriate user address in the To:
field.

6.    Setting Program Preferences
POPmail is designed so that you can customize the program to meet your needs.  To customize
POPmail, select "Preferences..." from the File pull-down menu.  The Preferences dialog box
shown in Figure 11 will appear.  Use the mouse to click in the little box to the left of each
option in order to toggle the preference ON or OFF (when an X appears in the box to the left of
preference, it is turned ON).  (Using the keyboard you can toggle a preference by pressing the
Alt key together with the letter that is highlighted for the preference in question; or, press the
<TAB> key repeatedly until the desired preference is selected [highlighted] and then press the
Spacebar to toggle that preference ON or OFF.)  The default values are pre-set by POPmail to
the values shown in Figure 11.  If you don't like these default values, you are free to change
them at any time.  POPmail permanently remembers your settings.

Figure 11: Preferences Dialog Box

The first preference option in Figure 11 is "Include incoming message in Reply".  This feature
is used in conjunction with the Reply button in the Viewer window (see Fig. 10). When there
is a check in the square to the left of this preference, POPmail will collect the text in the
incoming message and include it for reference as a preface to the reply you will formulate to the
message while using the Reply feature on the Viewer window.  The text collected from the
incoming message will appear before your reply, with a leader line stating, " On [such and
such a date] [so and so] writes: ".  In addition, to further differentiate the incoming message
from your reply which will follow in the message field,  POPmail places a greater than (>)
symbol before each line of the incoming message.  You then type your reply following this
reference text.  This feature is useful because it allows each recipient of your reply to consider
your reply in the context of the original incoming message.

The second preference option is "Display POPmail's copyright screen".  When there is a check
in the square to the left of this preference, POPmail will display the POPmail copyright dialog
box (POPmail's initial screen) whenever you start up POPmail.

The third preference option is "Add signature to outgoing mail."  When there is a check in the
square to the left of this preference, POPmail will automatically end each of your outgoing
messages with a signature block of your choice, as shown in the John Doe example in Figure
11.

The fourth preference option is "Save copy of outgoing mail."  When there is a check in the
square to the left of this preference, POPmail will automatically place a copy of each outgoing
message into your POPmail database.  This convenient feature saves you a record of every
message you send.

The fifth preference option is "Check for mail at startup".  When there is a check in the square
to the left of this option, POPmail automatically fetches any mail waiting for you when you
start POPmail.

The six preference option is "Prompt for password."  When there is a check in the square to the
left of this preference, POPmail will require you to enter your password every time you start
POPmail.  The password will not be stored in the configuration file.

The seventh preference option is "43/50 line mode as default."  When there is a check in the
square to the left of this preference, POPmail will start with the program in the highest
resolution mode allowed by your computer's video display adapter.  You can always use
POPmail's Video mode command under the ║ (system) menu to switch to low resolution mode
(25 line mode) and back again as often as you wish.


7.    Desk Accessories
POPmail has several desk accessories (small programs that you can run while you are running
POPmail).  The POPmail desk accessories are:  calculator, calendar, ASCII table, IP finder,
and Finger.  You activate a desk accessory by selecting the appropriate item in the ║ (system)
pull-down menu in POPmail's main menu bar.  A short description of each desk accessory
follows.

7.1    Calculator
The calculator is a simple four-function calculator.  Numbers and numerical operations are
selected by clicking on the calculator buttons or by using the keyboard.

7.2    Calendar
The calendar is a simple electronic calendar.  The current month appears automatically, but you
can use the arrow keys or the calendar buttons to move to a future or past month.

7.3    ASCII Table
Use this desk accessory to look up the ASCII codes for any character, including special foreign
language characters.

7.4    IP Finder
This desk accessory will look up the IP address of any internet name.

7.5    Finger
You use the Finger desk accessory to look at the status of an account on a given machine.  For
example, if you can provide an E-mail address, Finger will tell you the person's name in real
life, the last time the person logged in to his account, and other site-specific details.

At the University of Minnesota, you can use Finger as an electronic phone book. For example,
to look up all people with the name Hickman at the University of Minnesota, you would
specify [e-mail].  Then Finger returns all information pertaining to Hickmans
in the University phone book.


8.    Other Features
8.1    Memo Editor
The memo editor is a simple ASCII text editor that lets you open up multiple windows for the
purpose of importing and editing ASCII text.  Cut, Copy , Paste, New, Open and Save
operations are supported, as well as a Find and Replace facility.  Memo Editor commands are
accessed through the Memo and Edit pull-down menus located in POPmail's main menu bar.

8.2    Moving a Window
You can move the Viewer and Composer windows, as well as dialog boxes, by using a mouse
or the keyboard.  Using a mouse, place the mouse cursor on the top bar of the window frame,
press the left mouse button, and continue to hold the mouse button down while dragging the
window to a new location, then release the mouse button.  Using the keyboard, press Ctrl-F5
(or select "Resize/Move" from the Window pull-down menu and use the four arrow keys to
move the window.  Press <ENTER> when done.)

8.3    Resizing a Window
The Clipboard window (you can view the clipboard by selecting "Show Clipboard" from the
Edit menu) and the Trace Window (see the "Trace Facility" below) can be resized as well as
moved.  To resize a window using the mouse, grab the lower right corner of the frame and
press the left mouse button, dragging the mouse until the desired size is achieved; or, using the
keyboard, select "Resize/Move" from the Window menu and use the arrow keys while holding
the Shift key down.  Press <ENTER> when done.  In general, the Composer window, the
Viewer window, and dialog boxes cannot be resized.  However, in 43/50 (high-resolution)
mode, you can click on the zoom box (the little square in the upper right-hand corner of the
window) to change the window back and forth from full screen to half-screen.

8.4    Trace Facility
POPmail has a built-in trace facility to assist network administrators in trouble-shooting when
POPmail fails to Fetch or Send properly.  If your network administrator is unsuccessful in
trouble-shooting the problem, we can be more helpful if we receive trace output.  When tracing
is turned ON, POPmail will write a detailed log of the transactions between the PC and the host
mail server when messages are fetched or sent.  Then your network administrator can use this
log to help locate the source of the problem.  You press Alt-F10 to display the Trace Options
dialog box, as shown in Figure 12.

Figure 12:  Trace Options Dialog Box

By default tracing is turned off.  You turn tracing on by selecting a trace destination, either to
the trace window or to a file.

You can direct the trace output to a Trace window by choosing the "..╩to ╩trace window" radio
button and then clicking on the oK button.  Then a movable and resizable Trace window is
made visible and active.  You can scroll back through this window to see earlier messages.
(The Trace window has an 4k buffer).  All new messages are always added to the bottom of
the window.  If the Trace window gets covered by the Viewer or Composer windows, you can
bring it to the front by successively pressing F6 (Next Window) until the Trace window
appears on top of all other windows.  You can close the Trace window by clicking in the close
box in the upper left-hand corner of the window or by pressing the <ESC> key.  Even if the
Trace window is closed, transactions will still be recorded to the trace window, you just won't
be aware of them.  Remember, if you have closed the Trace window, you can make it visible
again by pressing Alt-F10.

To direct Trace output to a file, select the "..to╩file" radio button, type the name of the file in
the input box just to the right of this radio button, and then click on the oK button.  By default,
POPmail uses the file name "POPTRACE.TXT".  If you enter PRN for the filename, the trace
output will go to your printer.

The values you enter into the Trace dialog box are transient.  They are forgotten once you quit
the POPmail program.  The Trace dialog box initial (default) settings are shown in Figure 12.
The four check boxes let you control the level of detail included in the trace output.

8.5    Program Switches
The POPmail program has two advanced optional parameters called program switches.  They
are the /P and /BATCH options.

The /P switch allows multiple users to run a single copy of POPmail on a network, each user
with a custom POPmail configuration file.  It also makes it possible for each user to choose
among multiple sets of POPmail configuration files by specifying the path (location) of the
desired configuration file.

Using the /BATCH option allows you to find out how many incoming messages are waiting to
be read.  When you use the /BATCH option, POPmail runs in a non-interactive mode; that is,
POPmail simply reports the number of messages waiting for you and then quits.  POPmail sets
ErrorLevel to the number of messages waiting.  In batch mode, you can also redirect the
output.  You could use this option in a batch file to check whether any messages are waiting in
your mailbox and if there are, run POPmail in interactive mode to retrieve and read them.

For example, to have POPmail use the configuration file in directory C:\POP77 and run in a
batch file so POPmail will report the number of messages waiting, you would use the
following command at the DOS prompt when starting POPmail:

          POPMAIL  /BATCH  /PC:\POP77

This sample batch file runs POPmail in interactive mode only if there are messages waiting:

          @POPMAIL   /BATCH   >NUL
          @IF NOT ERRORLEVEL 1 GOTO :QUITNOW
          @POPMAIL
          :QUITNOW

8.6    Overloaded Buttons
An overloaded button is a software button which performs a new function (other than the
function originally intended) if the Shift key is held down while the software button is
activated.

Shift-Send
Shift-Send will cause POPmail to make a copy of your outgoing message regardless of the
setting chosen in the Preferences dialog box.

Shift-Discard
Shift-Discard will discard a message without further prompting.

Shift-Enclose
Shift-Enclose will allow you to append an ASCII text file to your outgoing message.


9.    Summary and Cautions
POPmail is designed to give networked microcomputer users an easy-to-use E-mail system
with wide connectivity.  While other Post Office Protocol software for the PC already exists,
POPmail/PC╒s user interface mirrors the Macintosh POPmail user interface.  This consistency
helps simplify training for departments that have mixed Macintosh and PC computing
environments.

Since there are many details to be considered in establishing a connection to the campus
backbone network, we strongly advise that you consult the staff at the Microcomputer
HelpLine before you plan your network or purchase any hardware.

If you want to discuss POPmail (or other E-mail systems), call or visit the Microcomputer
HelpLine.  If you visit the HelpLine, our consultants can demonstrate POPmail for you.  If
your department decides to run POPmail, we would be happy to help you set things up.


9.1    Acknowledgments
We wish to extend our thanks to Borland International of Scotts Valley, California, for
continued excellence in the enhancement of their Turbo Pascal product.  We developed
POPmail Version 2.0 using Borland's TurboVision, an object-oriented library of special-
purpose routines provided with Borland's newest release of Turbo Pascal, Version 6.0.

For the use of the Clarkson Packet Drivers, the foundation on which our network products are
based, we gratefully acknowledge Clarkson College of Potsdam, New York and Dr. Russ
Nelson.

For many helpful comments and ideas as well as selected code segment contributions, we
would also like to thank Phil Burns of Northwestern University.
10.    Miscellaneous Technical Issues
10.1    Using POPmail with Novell
Version 9.x of the Clarkson packet drivers will work with Novell NetWare.

First, you must access Novell NetWare by using a special IPX.  It requires
that you SHGEN a new one using the driver from BYU to create the interface
between the packet driver and NET3/4/5/X.  The BYU_IPX is a generic IPX that works with
any of the boards that use the packet driver, so if you have a mixture of 3COM, Novell
Ethernet, and other boards you just need the appropriate packet drivers and the BYU version of
the IPX.

Second, to configure the packet driver to work with Novell NetWare, simply add the -n switch
to the command line immediately after the command to invoke the driver, before any other
parameters.  For example, to invoke the packet driver for the 3COM 503 board, allowing for
use with TCP/IP and Novell NetWare, you would use the following command line:
        c503.com -n 0x60 3 0x300


10.2    Using POPmail with Windows 3.0
Version 9.x of the Clarkson packet drivers will work with Microsoft Windows 3.0.  To
configure the packet driver to work with Windows 3.0 or greater, add the -w switch to the
command line immediately after the command to invoke the driver, before any other
parameters.  This allows you to use Windows to invoke POPmail, Telnet, ftp, or tn3270
directly.  For example, to invoke the packet driver for the 3COM 503 board, allowing for use
with TCP/IP and to work with Windows 3.0, you would use the following command:
    3c503.COM -w 0x60 3 0x300

If you want to use Windows and Novell NetWare together, your command lines would look
like this:
        BYU_IPX.COM
        3c503.COM -n -w 0x60 3 0x300

In addition, you will need to set up a separate Windows .PIF file for each of the applications
(POPmail, Telnet, ftp, and tn3270) with the following options so that Windows can run these
packet-driver-dependent applications correctly:

   Full screen                      ON
   Background execution             ON
   Close Window on Exit             ON

   Under "Advanced...":
         Background priority       100
         Detect Idle Time          OFF
         Lock Application Memory    ON
         Video Memory             TEXT
         Monitor Ports              OFF (i.e., all boxes off)
         Retain Video Memory        ON

The .PIF file should point to the .EXE files for each of these programs.


11.    POPmail Questions & Answers
This section presents questions we are asked frequently concerning POPmail/PC.

-------------------------------------------------------------
Q.  Does POPmail PC have a "find message" feature?

A.  Currently, the answer is "no".  We are working on a message search, organizing, and
archiving facility.  Right now the "database"-like features are modest.

-------------------------------------------------------------
Q. What can I do if POPmail says "Not enough memory
to run POPmail"?

A. The current version of POPMail needs at least 512K of free memory.  If you have a lot of
TSRs or your network software has a large resident portion, then POPMail will have trouble
running.  Do a "chkdsk" or "mem" command to see how much free memory is left for
applications.  You may need to remove some device drivers or reduce the number of files or
buffers.

-------------------------------------------------------------
Q. How do I define a group in the "Edit Groups" window?

A. Groups are defined by listing a group name, followed by one or more spaces, followed by a
group member's mail address, followed by one or more spaces, followed by another group
member's mail address, etc. Put a blank line after the group to separate it from the other groups
you have defined.

-------------------------------------------------------------
Q.  Is there a way to include a full name as a comment in the group listing so that they can be
more easily identified?  For example for the alias "chairman" could I define a group as follows?

         chairman            [e-mail] (Joe Blow)

A.  No, there is no comment facility to do what you are attempting to do by putting a name in
parentheses.  We suggest that you define the alias as the person's name. Then you can easily
remember who it is when selecting the Select group... pull-down menu. For example, we
suggest that you define the alias like this:

      Joe_Blow  [e-mail]

By doing this, you can select Joe_Blow off the list of groups rather than trying to remember
who "chairman" is.

Note:  Spaces are separator characters; that is, they mark the end of names.  To denote a space
within a name, use the underline character where a space would normally occur. For instance,
define a group called AIS_CSO_Nameserver_Dude like this:
     AIS_CSO_Nameserver_Dude    [e-mail]


-------------------------------------------------------------
Q.  We are running a POP3 server on port 110.  Can we use POPmail with this POP port?

A.  Yes.  To have POPmail use a port other than the default 109 port, simply specify the
desired port in the Advanced Configuration Parameters dialog box (access this dialog box by
activating the Advanced... software button in the Configure dialog box).

-------------------------------------------------------------
Q.  I just FTP'd POPmail/PC and tried to run the program. I get the error message "TCP
Driver did not load".  What is wrong?

A.   This can happen if you forget to specify binary mode when doing the ftp.  Before you
enter the ╥get╙ command, enter ╥binary.╙  Sometimes we also see this problem if there are too
many gateway hops, resulting in the file getting mysteriously truncated along the way.  For
some reason, we've seen this problem frequently when people ftp POPmail from our server to
their site in Canada.  Other than forgetting to specify binary mode, we still are not sure why
this phenomenon occurs. Often subsequent attempts will succeed where the first try failed.
After you ftp, just make sure that you have the complete file by checking that you received the
correct number of bytes as shown by the directory command (ls).

If all else fails, many people with this problem have had success when they ftp the compressed
file version of POPMAIL.EXE (popmail.exe.Z).

-------------------------------------------------------------
Q.  In what format is the POPmail/PC manual?

A.  The manual is in 3 formats: (1) man.hqx is in binhex format for Microsoft Word 4.0 on the
Macintosh;  (2) man.rtf is in RTF (rich text) format, so you should be able to download and
read this file with any version of Microsoft Word for the IBM; and (3)  man.txt is a straight-
ASCII version of the manual.

-------------------------------------------------------------
Q.  I have a friend who gave me his access number on CompuServe.  Can I use POPmail to
send him mail?

A.     Ñ From internet to Compuserve:
    Compuserve addresses are of the form  nnnnn,nnnn  where n is 0 to 9.  For example,
72555,3235.  Change the comma to a period and append @compuserve.com and you've got it.
For example, to send to 72555,3235 you would address your mail to
        [e-mail]
    Ñ From Compuserve to internet:
    Preface the internet address with >INTERNET: and you're done.  For example, to send
mail to a user name fred with an account on an internet mail server named
boombox.micro.umn.edu from Compuserve you would address mail to
        >INTERNET:[e-mail]

-------------------------------------------------------------
Q.  Does POPmail support BOOTP?

A.  We do support automatic configuration through BOOTP.  BOOTP is a protocol that lets
you define all the parameters, IP address, gateways, and name servers at one central server.
POPmail/PC interrogates the BOOTP server if the microcomputer IP address is 0.0.0.0.  In
this way new users can just start up POPMail without knowing any IP numbers and POPMail
will configure itself.

-------------------------------------------------------------
Q.  We have more than one Packet Driver loaded.  POPmail can't seem to find the correct
packet driver. What's going on?

A.  POPmail uses the first packet driver it finds.  Make sure the packet driver POPmail needs
has the lowest interrupt number. You can ensure success by assigning it the lowest possible
interrupt number:  0x60.

-------------------------------------------------------------
Q.  Does POPmail/PC work on an AppleTalk network?
A.  We have tested POPmail with token ring and ethernet cards.  POPmail does not currently
support LocalTalk, although we may add LocalTalk support at sometime in the future.

-------------------------------------------------------------
Q.  When I tried to use the 3C503 packet driver I was required to change the jumpers on the
3C503 to allow shared memory.  This allowed me to run POPMAIL which looks like a real
good product.  However when I reconfigured the PC to boot with PC-NFS it wouldn't work
unless I set the jumpers on the 3C503 back to "memory disable" (note: I didn't try to load
3C503 packet driver).

A.  The packet driver for this particular hardware requires memory sharing, while PC-NFS
disallows it.  One of our users recently learned from SUN of an undocumented "switch" (/m4)
that can be used when loading the PC-NFS drivers for the 3c503 card.  For example, when
you boot up for PCNFS, you load the following:

Device= \NFS\DRIVERS\VECIE6.SYS /I2 /T2 /M4

This switch allows the PC-NFS drivers to use the 3c503 card jumpered for shared memory.
This way one can use either the Clarkson drivers for telnet or POPmail or the PC-NFS drivers.
Of course, one can not use them at the same time; separate reboot sequences are still necessary.
But at least one needn't re-jumper the card to alternate between the two usages.

-------------------------------------------------------------
Q.  Can you run PC NFS and POPmail together?

A.  No, they can't both be running at the same time. PC-NFS and POPmail each have their
own TCP protocol code.  They end up confusing each other.  The ideal solution would be for
IBM to mandate one TCP driver that all applications must use, just as the packet-drivers are
common low-level drivers all net applications use.

Unfortunately, we are not aware of a simple common TCP driver which all TCP programs
accept as standard.

You'll have to set up some way of switching autoexec.bat files to selectively load PC-NFS or
POPmail, but not both at the same time.
-------------------------------------------------------------
Q.  Can you make POPmail a TSR?

A.  A POPmail TSR would be nice in theory, but it would take up about 80k of RAM.  Most
users don't want to or can't lose 80k without wreaking havoc upon their main applications.  So
while it would be an interesting exercise in programming, it's not too practical on DOS
machines.  However, POPmail does have a batch mode that you can use to have POPmail
report the number of messages waiting for you on the server (see the manual for further
information).

-------------------------------------------------------------
Q. Where are the POP2 protocols described?

A. The description of the POP2 protocol is in RFC937.

-------------------------------------------------------------
Q.  Does POPmail use password encryption?

A.  We added DES encryption to the login sequence.  Our POP2 server makes up a random
key and sends it to the client.  The client encrypts the password with the key and sends it to the
server.  The server can then unencrypt the password and check it. By choosing the right
defaults, we can keep the server and clients interoperable, i.e., the client can recognize our
"extended" POP2 server by the presence of a key in the server's welcome message. Therefore
the client sends encrypted passwords to extended servers, and regular clear passwords to plain
POP2 servers.  Similarly, our server accepts both encrypted and clear passwords
interchangeably.  Therefore you can mix and match.  Our clients can talk to a standard POP2 or
POP3 server, and other clients such as Eudora can talk to our server.  As another level of
security, if our client determines that it is talking to a standard POP2 server, and must send the
password in the clear form, it sends the password 1 character per packet with long random
delays between packets, instead of sending it all in 1 packet.  This disguises the password from
all but the most knowledgeable of network peekers.  You can get our extended POP2 server by
anonymous FTP from boombox.micro.umn.edu.  It is in /pub/POPmail/unix.

-------------------------------------------------------------
Q.  We are using POPmail/PC and when sending a file attachment to a Macintosh client that is
using Eudora, the Macintosh client gets info stating the file needs to be BINHEXed.  Why?

A.  There is a slight incompatibility between Eudora and POPmail's method of sending
attachments.  Eudora will sometimes complain that there may be extra characters at the end of
the attachment, or some similar message.  You can ignore the message as the attachment is
okay.  It is just that POPmail sends one harmless extra character in certain cases.  This triggers
an error message from Eudora.

-------------------------------------------------------------
Q.  Where is the complete collection of the packet drivers?

A.  A complete collection is available via anonymous ftp from   sun.soe.clarkson.edu.
-------------------------------------------------------------
Q.  I am trying to install POPmail and I can't seem to connect to our POP server.  What's
wrong?

A.  It's hard to say.  In order to tell whether something is wrong with the way your POP server
is configured, try connecting to our POP server first.  We have an account on our POP server
which is specifically designated for testing POPmail.  Our POP server lives on
boombox.micro.umn.edu (IP address 128.101.95.95).  User Name is testmail and Password
is testmail.

-------------------------------------------------------------
Q.  Is there a version of POPmail that allows you to get your mail via a dialup connection?
I'm not interested in something that works on dialup slip, but rather something that just
establishes a clean datapath between the PC and the pop and smtp mail servers...much like
Eudora for the Macintosh allows you to do.

A.  The answer to your question is, ╥No, you cannot do what you ask.╙  POPmail works over
a SLIP connection for dialup use.  SLIP allows you to use network applications (POPmail,
internet gopher, telnet, ftp, etc.) from home with exactly the same user interface as when
running these over a LAN connection.  Another advantage with SLIP is that you have end-to-
end error detection (something not true of Eudora's dialup access method).

-------------------------------------------------------------
Q.  How are Swedish characters mapped?

A.  Before we answer your question, let's review how computers deal with characters.  Your
computer stores each character in an eight-bit chunk called a byte.  Depending upon the number
stored in a byte, the byte can represent one of 256 characters.  A standard called ASCII has
standardized the first 128 numbers to represent each of the characters necessary for the English
language plus important symbols such as the dollar sign, period, and comma, and each of these
numbers has been assigned a number.  For example, the number stored in the byte representing
the dollar sign has been assigned the number 36.  This number is the same across all
manufacturers, and this consistency makes it possible to exchange characters accurately from
computer to computer.  Unfortunately, there is no standard for representing characters used in
many other languages.  Since computer manufacturers want to sell computers to people who
need other characters in order to communicate in their own languages, each manufacturer picks
some arbitrary number beyond the first 128 numbers reserved by ASCII to represent each
foreign character.  For example, the Swedish language uses a character called an "umlauted a"
(an "a" with two dots over it).  An IBM computer uses the number 132 to represent a lower-
case umlauted "a", whereas a Macintosh uses the number 221 for this same character.
Obviously, this difference causes a problem when transferring text between an IBM PC and a
Macintosh.  But, there is even a larger problem.  When you send mail electronically, many mail
programs will ignore any characters not part of the first group of 128 characters defined by the
ASCII standard.  For this reason, many countries like Germany, France, and Sweden have
decided to sacrifice certain ASCII characters in order to re-map or re-define these characters to
accommodate the letter characters they need.  For example, the tilde character (~) is mapped to
represent an umlauted "u" (a "u" with two dots over it) for the Swedish language character set.
POPmail makes the conversion automatically, so that two people using POPmail can exchange
E- mail written in Swedish without having letter characters appear as tildes or curly brackets at
the other end.  Here are two tables showing how POPmail maps characters for the Swedish
language when receiving and sending a POPmail message.  The IBM character code for each
character is shown in the right-most column:

Incoming Characters:
     { --> è  (a with 2 dots above)    132
     } --> î  (a with a ring above)    134
     | --> Ü  (o with 2 dots above)    148
     ~ --> ƒ  (u with 2 dots above)    129
     ` --> Ä  (e with accent)          130
     [ --> Ç  (A with 2 dots above)    142
     ] --> ü  (A with a ring above)    143
     \ --> à  (O with 2 dots above)    153
     ^ --> å  (U with 2 dots above)    154
     @ --> â  (E with accent)          144
A.  Outgoing Characters:
     è --> {
     î --> }
     Ü --> |
     ƒ --> ~
     Ä --> `
     Ç --> [
     ü --> ]
     à --> \
     å --> ^
     â --> @

-------------------------------------------------------------
Q.   I've installed POPmail for testing and I noticed that in the initial setup ( configuration ), I
do not get a prompt for 'Full Name'.  Is this normal?

A.  That is normal.  POPMail gets your full name from the SMTP server.  This is to
discourage forged mail.

-------------------------------------------------------------
Q.  What language is POPmail written in?

A.  Turbo C version 1.5, Turbo Assembler 1.0, and Turbo Pascal 6.0

-------------------------------------------------------------
Q.  How is the software in POPmail/PC layered?


A.  It is arranged like this:

       POPmail main program (user interface)
             |
             |
       net mail (same code for Macs and IBMs)
             |
             |
       ibm tcp
             |
             |
       seg (all written in C and ASM)
             |
             |
       packet driver

The SEG code is really a C program that is loaded into a segment by the Pascal program, in
this case POPmail.  The Pascal program then transfers control to the C program (written in the
small memory model so it fits into one segment).  The C program then hooks an interrupt and
returns control to the Pascal program.  When the Pascal program wants a TCP function it calls
a routine in ibmtcp that then calls the C program via an interrupt.  SEG provides simple
functions like open, close, read and write.






POPmail/PC








User Manual
Version 2.5

15 April 1992









Computer & Information Services
University of Minnesota
Room 125 Shepherd Labs
100 Union St. SE
Minneapolis, MN 55455

⌐1992 University of Minnesota