home *** CD-ROM | disk | FTP | other *** search
- TECHNICAL BULLETIN
- 04.25.90 ADDTODOS JCR (update 7.30.90)
- DISK UTILITIES: Add To DOS, Elkay Software
-
- Installing Add To DOS
- Insert Add To DOS disk in floppy drive, and from floppy prompt run the INSTALL program. This will copy
- the necessary files to an \ATD directory and reconfigure the autoexec.bat file to load Add To DOS upon
- reboot. NOTE: Upon completion of installation, Add To DOS will reboot the system.
-
- Add To DOS provides drive accessibility through a "pull-down" menu. This menu seems to recognize only
- physical designations. On this assumption, one must either specify the physical designation (A: B: C:...) as a
- redirected drive through the network or use the DOS SUBST command, or use Add To DOS on local
- designations only.
-
- The redirected drive designations (E: F: G:...) are available through the DOS prompt with Add To DOS
- loaded, and tests indicate most network commands function accordingly through that prompt.
-
- When loaded, Add To DOS requires approximately 74000 bytes of RAM.
-
- Add To DOS does not appear to be Network Aware, and intermittent problems were encountered when
- testing on a LANtastic server. This is a known problem and has been confirmed with the product
- manufacturer.
-
- Add To DOS has been tested with the LANtastic NOS 2.57 and 3.0, and has been added to our compatibility
- list with a note recommending the user not to run AddToDOS on a LANtastic server. Elkay Software has
- confirmed the content and accuracy of this document.
-
- Vendor Info
- Elkay Software Inc.
- 5032 Goddard Avenue Suite C
- Orlando, FL 32804
- (407) 380-5168
-
-
-
-
-
-
-
-
-
-