home *** CD-ROM | disk | FTP | other *** search
- ; charon.dat -- sample charon configuration data file
- ;
- ; all text following a ';' on each line is considered to be a
- ; comment line.
- ;
- ;
- ; Quoted Strings may contain escaped characters
- ; \nnn An octal escape
- ; \e Decimal 27 ESCAPE
- ; \r Decimal 13 CR
- ; \n Decimal 10 NL
- ; \\ The character '\'
- ;
- ; Quoted strings may continue accross line boundaries, in which case the
- ; <CR><NL> will become part of the quoted string.
- ;
- ;
- ; This file is a 'free format' file. The columar position is not
- ; important during the parsing of this file.
- ;
- ; What is important is the sequencing of the command elements, the
- ; having the proper number of arguements for each command.
- ;
- ; Arguements that do not contain spaces do not require quotes.
- ;
-
- myname romulus.erc.clarkson.edu ; the internet name of the gateway machine
-
- screensave 15 ; 15 second screen saver timeout
-
- rconsole ; include this parameter if you want
- ; to enable remote terminals to telnet
- ; into the gateway and view the console.
-
- ; users will be required to log in.
- ; they must be direct members of the
- ; group "RCONSOLE"
-
- server "draco" ; enter the Novell server name,
- ; and additional server information
- userid "charon" ; the Print Server Account name
- password "" ; the Print Server Account password
-
- mailqueue "mailqueue" ; the name of the mailqueue
- poll 10 ; poll this queue every Poll seconds
-
-
- server "darius"
- userid "charon"
- password ""
- mailqueue "mailqueue"
- poll 10
-
- mailer ; begin mailer information section
- agent "omnigate" ; specify the config.tel name
- ; of the smtp agent
- lists ; specify information about where
- ; mailing list information is stored
- "draco" ; The Master Novell Server
- "sys:public\\lists" ; the Directory on that Server
- ; Don't include trailing \
- ; and remember to use two of them
- ; because \ in quotes means an escape
-
- smtpout ; specify where outgoing SMTP messages
- ; should be queued for transmission
- ; to the SMTP Agent.
- "draco" ; The Master Novell Server Name
- "workqueue" ; The name of the Queue on that Server.
- 10 ; How Frequently that queue should be
- ; polled
-
- smtpin ; Specify where incoming SMTP messages
- ; should be queued.
- "draco" ; The Master Novell Server Name
- mailqueue ; The name of the Queue on that Server.
-
- listcycles 2 ; number of list addressees to deliver
- ; to per cycle
- listdelay 1 ; number of seconds to delay between
- ; cycles during list delivery
-
- debug ; Inclusion of this parameter in the
- ; mailer section causes an SMTPD
- ; debug window to be created.
- ; Comment out the debug line if
- ; you don't need a debugging window.
-
- max_smtpds 2 ; Specify the maximum number of
- ; SMTPDs (they listen for incoming
- ; SMTP connections) that may be
- ; active at any given time.
- ; A new one is created when
- ; an incoming SMTP session is established.
- ; unless MAX_SMTPDs have already been
- ; created.
-
- ; nobroadcast ; this optional parameter, if
- ; included, instructs charon to
- ; not send broadcast messages to
- ; recipients when they receive
- ; new mail
-
- returnlines 0 ; this optional parameter specifies
- ; how many lines of message text
- ; in rejected messages should be
- ; returned to the sender.
- ; 0 means all lines. If not specified
- ; the default is 10
-
- returnto "sender" ; this optional parameter indicates who
- ; should receive rejected mail messages.
- ; possible choices are
- ;
- ; "sender" - default if not specified
- ; "postmaster"
- ; "both"
-
- timeout 600 ; this optional parameter sets the
- ; maximum execution time per message
- ; in seconds for outgoing and incoming
- ; smtp mail. The default is 10 minutes.
- ;
-
- timesync ; this section lists the master and
- ; slave time synchronize entries
- ; which allows charon to synchronize
- ; the server time on novell servers
- ; to a single master novell server
- ; or to a unix system which supports
- ; rdate
-
- master "omnigate" ; the master name. This should either
- ; be your master novell server
- ; or the name of a unix system which
- ; supports rdate (be sure there is
- ; an entry for this host in your config.tel
- ; file
-
- slave darius ; list each slave novell server
- slave draco ; the gateway group must be a console operator
- ; on these servers to set the time
-
- poll 86400 ; this parameter tells the gateway
- ; how often it should synchronize
- ; the servers. The value is in
- ; seconds and the default is once
- ; every 12 hours (24 hours is shown
- ; in this file).
-
- aliases ; this section lists the aliases
-
- ; The NODE command equates a Novell
- ; Server with it's internet domain name.
- ; you must have a Node entry for each
- ; novell server serviced by this gateway.
-
- node "draco.erc.clarkson.edu" ; Specify the Internet name of a Novell Server
- "draco" ; along with its Novell Name
-
- node "darius.erc.clarkson.edu" ; Specify the Internet name of a Novell Server
- "darius" ; along with its Novell Name
-
- ; The USER command defines an alias
- ; for a Novell Username (optionally at a host)
- ;
- ; you MUST specify an alias for Postmaster.
-
- ; you MAY specify an alias for Postmaster
- ; on each server.
-
- ; first the global alias is checked
- ; (an alias without a host specified)
- ; then an alias for the target user@host
- ; is checked
-
- user "postmaster" ; Specify an alias for the Postmaster (required)
- "supervisor@draco" ; to actually send mail to this user on this Novell Server
-
- user "postmaster@darius" ; Specify an alias for the Postmaster on Novell Server Darius
- "supervisor@darius" ; to send it to the supervisor on Darius
-
- user "postmaster@draco" ; Same as Above
- "supervisor@draco" ; Send it to supervisor on draco instead
-
- user "novell-l-request" ; Enter an alias for a list maintainer
- "bkc@draco" ; Thats me
-
- user "supervisor@darius" ; this is an interesting one
- "bkc@omnigate.clarkson.edu" ; entered just to prove a point.
- ; you can 'nest' aliases up to 10
- ; deep.
- ; in this case, mail to postmaster@darius
- ; would go to supervisor@darius which
- ; is actually sent to bkc@omnigate.clarkson.edu
-
- ; the LIST command specifies the required
- ; information about mailing lists which
- ; you want the gateway to be able to expand.
-
- list "novell-l" ; the name of the list (like a userid)
- "novell.lst" ; the name of the file in the lists dir
- ; (see mailer section above) that contains
- ; the subscribers to the list.
- ; The format of a list file is the
- ; same as what Pmail uses, and both
- ; pmail and charon can use the same
- ; list file.
- ; (one addressee per line).
-
- list "charon-l" ; here's another list
- "charon.lst"
-
- ; here's how you equate a list to a Novell group
-
- list "everyone"
- ":draco/everyone" ; the format is server/group
- ; the ':' flags this as being a group
- ; list, and not a file
-
- logfiles ; The logfiles section describes
- ; files to be used to log
- ; accounting and message information
- ; in.
- ; Information written to a log file
- ; consists of key/value pairs
- ; written with an optional seperator
- ; string between values and an optional
- ; field width.
-
-
- file "system" ; the internal name of this
- ; particular log file. The name
- ; is referenced later in the file.
-
- server "draco" ; the file server which we wish
- ; to use to store the log file on.
- ; This parameter is optional, and if
- ; not given implies that the log
- ; file will be stored on a non-novell
- ; drive.
- name "vol1:usr\\staff\\bkc\\system.act"
- ; the real physical name of the log file.
- ; it may reference a local drive, if
- ; desired.
-
- maxsize 64000 ; This optional parameter specifies
- ; the maximum size of the file. If
- ; not given, the log file can grow to
- ; any length.
-
- recycle ; This optional parameter is used along
- ; with the maxsize variable to indicate
- ; what action should be taken when
- ; the log file reaches maximum size.
- ; Recycle means that the write pointer
- ; is moved to the beginning of the file
- ; and operation continues.
-
- separator " " ; optional, specifies the seperator string to
- ; be output between data fields.
- ; this string can contain newlines "\n"
- ; commas, anything you want.
-
- ; showtags ; This boolean option indicates that
- ; the key names should be written to
- ; the file preceeding the values.
-
- ; columns 16 ; this optional parameter specifies
- ; the maximum and minimum field width
- ; for the data values written to the
- ; log file. Values shorter than this
- ; width are padded on the left
- ; values longer are truncated.
-
- file "smtp_accounting" ; the internal name of the file
- server draco ; which server we want
- name "vol1:usr\\staff\\bkc\\smtp.act" ; the name of the physical file.
-
-
- maxsize 64000
- recycle
- separator "," ; comma seperator
-
-
- log ; this section attaches processes
- ; to log files
-
- process "system" ; which process we want to log
- file "system" ; which log file we will use
- ; this corresponds to a file statement
- ; from the logfiles section
- item date ; record the date
- item info ; log informationals
- item warn ; log warnings
-
- process smtpout ; smtp output
- file smtp_accounting
- item date
- item time
- item process
- item sender_name ; log the senders name
- item sender_node ; log the senders node
- item filesize ; log the size of the message
- item destination_name ; log the destination userid
- item destination_node ; log the destination node
- item message_id
-
- process mailer ; mailer transfers to novell mailboxes
- file smtp_accounting
- item date
- item time
- item process
- item sender_name ; log the senders name
- item sender_node ; log the senders node
- item filesize ; log the size of the message
- item destination_name ; log the destination userid
- item destination_node ; log the destination node
- item message_id
-
- process smtpin ; this isn't too useful from an accounting
- ; standpoint, since entries here will also
- ; show up under the mailer entry
- file smtp_accounting
- item date
- item time
- item process
- item sender_name ; log the senders name
- item sender_node ; log the senders node
- item filesize ; log the size of the message
- item destination_name ; log the destination userid
- item destination_node ; log the destination node
- item message_id
-
- ; Note: You may enter a process name more than once. If you want
- ; to record process information to two different log files,
- ; just enter the process name twice and use a different file statement
- ; each time.
-
