home *** CD-ROM | disk | FTP | other *** search
- Use the BK5WORDS program to make any changes to the words in this file.
- Output will be sent to
- (Press F9 to change output)
- Printer
- Screen
- Disk with codes
- Disk without codes
- Push F1 if this is the correct person or TAB to continue search. F7=Abort
- No match found
- Push F1 if this is the correct person or F7 to abort search.
- VAN
- VANDER
- VON
- ST
- ST.
- DE
- MC
- MAC
- LE
-
-
-
- Born:
- Died:
- JR
- SR
- II
- III
- IV
- JR.
- SR.
-
-
- CREATING FILE:
- You need to start BTRIEVE before starting Brother's Keeper
- OPENING FILE:
- Before starting Brother's Keeper you need to type BK5 to load BTRIEVE
- Brother's Keeper 5.0 DATA files NOT FOUND in directory:
- Do you want to create empty 5.0 DATA files? Y or N
- program ends
- If you have 1 disk drive, insert DATA disk now, then push Enter to start.
- Push Enter to start
- Path
- Reading Alt key file
- names in file
- marriages
- locations
- M
- F
- JanFebMarAprMayJunJulAugSepOctNovDec
- LOADING BK5MAIN.EXE
- Your PATH does not exist or your drive is not ready to write to.
- Error code is
- The path should be something like A: or B: or C: or C:\BK\ or blank.
- Your path is currently
- Trying to open file:
- You may need to change the path on options screen 1
- push enter
- INVALID COLOR CHOICES
- Push Enter
- Push enter to continue
- Be sure printer is ready - push Enter
- Y
- N
- *UNKNOWN
- Invalid number
- çÇüÜöÖæÆéÉäÄñÑåÅ
- Push Enter to continue
- Cancelled
- please wait
- PRINT
- DISPLAY
- INVALID BKOPTION.DT5 file - run program BK5 to create BKOPTION.DT5
- Push Enter to continue or ESC to quit
- -Printing-
- Insert next page and push Enter (or Esc to quit)
- This person has no spouse or children to print
- b.
- d.
- Born
- Died
- Extra spaces for left margin
- Number of lines per page
- Type a page heading if desired
- Push Esc to cancel printing
- m.
- in:
- $$
- Type your 4 line personal message:
- This person has no spouse or children to print
- Start with person number
- Stop with person number
- Please wait - reading ancestors
- Born:
- in:
- Died:
- Spouse:
- Married:
- If you have a color monitor, type C then enter, if not just push enter.
- Baptized:
- Buried:
- Other:
- Ref:
- Occupation:
- Other:
- Options - Screen 1
-
- Form Color . . . . . . . . . . .
- Data Color . . . . . . . . . . .
- Background Color . . . . . . . .
- Date format (0-9). . . . . . . .
- Months (0=CAPITAL 1=Lower case)
- Name for date below Born . . . .
- Name for date below Died . . . .
- Name for date 2 lines below Died
- Name for bottom line at left . .
- Name for bottom line in center .
- Name for date below married. . .
- Menu default. 1=Add 2=Modify .
- Special effects (0=No 1=Yes) . .
- Begin output (1=print 2=screen)
- Push Enter if 1 char (0=No 1=Yes)
- Character for # ASCII (35)
- Path for .DT5 data files . . . .
- The Path line above tells where the data files are located. Example: C:\BK5
- You may have several sub-directories with different sets of files
- and may change between the sets by changing the Path line above.
-
- Push F1 if OK - or use TAB & SHIFT TAB to move to field to change
- Printer Options - Screen 2
-
- ASCII code for vertical (IBM=179) │
- ASCII code for horizontal(IBM=196) ─ These codes are used
- ASCII code for corner (IBM=192) └ in the Tree routine.
- ASCII code for vert/right(IBM=195) ├
- ASCII code for horz/down (IBM=194) ┬
- Print generation bar (0=No 1=Yes)
- Printer is LPT1 or LPT2 (1 or 2) You can also use Utility program
- Heading date format (1 or 4) to pick a printer to set
- Pause after each page (0=No 1=Yes) up the codes below.
- Compress print . . . . . . . CHR$ ( )
- Regular print . . . . . . . CHR$ ( )
- Bold print on . . . . . . . CHR$ ( )
- Bold print off . . . . . . . CHR$ ( )
- Can it BOLD w/compress(0=No 1=Yes)
- Can printer backspace (0=No 1=Yes)
- Can it CR w/out LF (0=No 1=Yes)
- Graphics spacing - sideways (18)
- CR and LF for end of line (0-3) <--- 0=CRLF 1=LFCR 2=CR 3=LF
- Printer codes - string 1 . . . .
- Printer codes - string 2 . . . .
- Printer codes - string 3 . . . .
-
- Push F1 if OK - or use TAB & SHIFT TAB to move to field to change
- T to test printer
- If this prints in 2 different places, your printer can NOT backspace.
- If this line prints as 2 lines, your printer can NOT CR without LF.
- The word
- bold
- should print bold.
- This line should be compressed.
- The word
- bold
- will print bold and compressed if possible.
-
- Be sure your PROGRAM disk is NOT write protected. The options file will be
- written at the same location as your programs. The options file will contain
- the drive letter or PATH for the location of your DATA files.
-
-
- If you have a SINGLE DRIVE computer, be sure your data disk is in,
- then push enter.
-
-
- If you have a 2 DRIVE computer, be sure your data disk is
- in the B: drive, then below type B: and push enter.
-
-
- If you have a HARD DISK system, and you started this program from within
- the subdirectory where you want the data files, just push enter.
- If you want the data files in a different subdirectory, type it below.
-
- For example: C:\BK5\
-
-
- Data Path is:
- Type R to print Range of numbers, type D for Descendants of someone,
- Type A to print Ancestors, or type a name or number to print one person.
- Error trying to open textfile called:
- Output will go to file:
- Executing
- This program contains extra reports for Brother's Keeper
- This is version 5.0 of these extra reports
- R - Register report
- I - Indented report
- 3 - 3 by 5 cards
- P - Print sorted index
- O - Options
- S - Stop
- B - Back to BK5
- You may want to send the output to a disk file and edit it with
- your word processor before printing with the word processor
- Print how many generations? (2-16)
- This routine allows you to print an index which you have just sorted.
- Have you sorted the index, and do you want to print it now? Y or N
- Do you want to print an alphabetical index now? Y or N
- Writing names to BKINDEX1.DTA
- The file must be sorted before printing. If you have DOS 3.0 or higher, and
- have enough RAM memory, and if SORTF.COM and COMMAND.COM are available, then
- you should be able to sort it now by pressing Enter. If you are not able to
- sort from this screen, then stop this program, and type the following line:
- Push Enter to sort or N to not sort.
- If there were no errors, sorting is done.
- Print index Regular (2 columns) or Compressed (3 columns) R/C
- Text file too long for this version
- Try printing message lines unformatted - option U
- Children's names: First, Whole, or first and Middle? F W or M
- Abbreviate to b. and d. or use Whole words born and died A or W
- bur.
- buried
- Include which message lines? A=All N=None *=only * U=Unformatted
- Print spouse messages also? Y or N
- Label the generations, e.g. second, third, etc. or only say Next (L or N)
- Regular size printing or Compressed or Unchanged (R,C,U)
- Number of characters per line
- Do you want page numbers? (and an index)
- Call the first page, page number
- Show code numbers?
- Show
- date and location? Yes No If birth unknown Y/N/I
- Use what word or abbreviation for
- date and location?
- How many blank lines for the top margin?
- This version has a limit of 20 generations
- Next
- Generation
- (See marriage to number
- daughter
- son
- of
- and
- children
- 3 by 5 Cards
- Do you want the
- field printed?
- 3 by 5 cards for:
- Type 2 to print a card for EACH person (each husband AND each wife)
- or type 1 if you want 1 card per marriage. Type 1 or 2
- Print cards for DESCENDANTS of
- Print cards for ANCESTORS of
- pb.
- pd.
- pr.
- pm.
- sp. pr.
- sp.
- Child
- married
- descendants of:
- If multiple spouses, do you want to show which spouse produced which kids?
- children by
- FIRST
- SECOND
- THIRD
- FOURTH
- FIFTH
- SIXTH
- SEVENTH
- EIGHTH
- NINTH
- TENTH
- ELEVENTH
- TWELFTH
- THIRTEENTH
- FOURTEENTH
- FIFTEENTH
- SIXTEENTH
- SEVENTEENTH
- EIGHTEENTH
- NINETEENTH
- TWENTIETH
- Character before last name [
- Character after last name ]
- Label size (lines top to top)
- Which address lines to print
- Put changes in BKAUDIT 0=no 1=yes
- Show date of change 0=no 1=yes
- Character to never print message
- ASCII for vertical bar (124) CHR$( ) used in ancestor and group
- Enter will search exact names 0/1
- Printer codes for superscript
- Printer codes to cancel super
- Print source/reference footnotes? Y/N
- -
- -
- -
- -
- -
- -
-