ProfitPress Mega CDROM2 Shareware Freeware (MSDOS)(1992)(Eng)

home *** CD-ROM | disk | FTP | other *** search

/ ProfitPress Mega CDROM2 …eeware (MSDOS)(1992)(Eng) / ProfitPress-MegaCDROM2.B6I / BBS / RA / APNT_102.ZIP / APOINT.DOC < prev next >

Wrap

Text File | 1991-10-02 | 15.6 KB | 406 lines

╒═════╕ ╒═╕ ╒═╕ ╒═══════╕ ╒═╕ ╒═╕ ╒══════╕ ╒══════╕ ╒═════╕ │ ╒═══╛ │ │ │ │ │ ╒╕ ╒╕ │ │ │ │ │ │ ╒══╕ │ │ ╒══╕ │ │ ╒═══╛ │ ╘═══╕ │ │ │ │ │ ││ ││ │ │ │╒═╕│ │ │ ╘══╛ │ │ ╘══╛ │ │ ╘═╕ ╘═══╕ │ │ │ │ │ │ │╘═╛│ │ │ ││ ││ │ │ ╒══╕ │ │ ╒═╕ ╒╛ │ ╒═╛ ╒═══╛ │ │ ╘═╛ │ │ │ │ │ │ ╘╛ ╘╛ │ │ │ │ │ │ │ │ ╘╕ │ ╘═══╕ ╘═════╛ ╘═════╛ ╘═╛ ╘═╛ ╘═══════╛ ╘═╛ ╘═╛ ╘═╛ ╘══╛ ╘═════╛ ╒═════╕ ╒═════╕ ╒═════╕ ╒═════╕ ╒═╕ ╒═╕ ╒══════╕ ╒══════╕ ╒═════╕ │ ╒═══╛ │ ╒═╕ │ │ ╒═══╛ ╘═╕ ╒═╛ │ │ │ │ │ ╒══╕ │ │ ╒══╕ │ │ ╒═══╛ │ ╘═══╕ │ │ │ │ │ ╘═╕ │ │ │ │╒═╕│ │ │ ╘══╛ │ │ ╘══╛ │ │ ╘═╕ ╘═══╕ │ │ │ │ │ │ ╒═╛ │ │ │ ││ ││ │ │ ╒══╕ │ │ ╒═╕ ╒╛ │ ╒═╛ ╒═══╛ │ │ ╘═╛ │ │ │ │ │ │ ╘╛ ╘╛ │ │ │ │ │ │ │ │ ╘╕ │ ╘═══╕ ╘═════╛ ╘═════╛ ╘═╛ ╘═╛ ╘═══════╛ ╘═╛ ╘═╛ ╘═╛ ╘══╛ ╘═════╛ ╒══════╕ ╒══════╕ ╒═════╕ ╒═╕ ╒═╕ ╒═════╕ │ ╒════╛ │ ╒══╕ │ │ ╒═╕ │ │ │ │ │ │ ╒═╕ │ │ │ ╒══╕ │ ╘══╛ │ │ │ │ │ │ │ │ │ │ ╘═╛ │ │ │ ╘╕ │ │ ╒═╕ ╒╛ │ │ │ │ │ │ │ │ │ ╒═══╛ │ ╘══╛ │ │ │ │ ╘╕ │ ╘═╛ │ │ ╘═╛ │ │ │ ╘══════╛ ╘═╛ ╘══╛ ╘═════╛ ╘═════╛ ╘═╛ Presents... Auto Point Version 1.02 Programmed By Roy M. Hooper and Rick Chartrand (c) 1991 by SumWare Software Group All Rights Reserved Automatic Point Nodelist Generator Auto Point 1.02 by Roy M. Hooper and Rick Chartrand Page 2 ____________________________________________________________________________ C O N T E N T S Contents 2 Overview 3 Disclaimer 4 Credits 5 Setup 6 Key Installation 7 Editing Environment 8 Editing keys 9 Switches for APoint 10 Apgen 11 Extra Information and Registration 12 Registration Form 13 Auto Point v1.02 by Roy Hooper and Rick Chartrand Page 3 ______________________________________________________________________________ O V E R V I E W Auto Point is a program aimed at helping sysops who run points. It uses an internal database which will create a point list. Whenever the database is quit, it will ask you whether or not you want to create the lists. If you choose to create the lists, AutoPoint uses the database to create a pointlist for each point using the specified filenames, and also creates a complete pointlist of all users for the sysop, in the specified file. It puts all of the nodelists into the specified outbound directory, and creates a file-attach message for each point's pointlist. Auto Point also has a handy feature that allows point operators that operate under your node to send an "Auto Point nodelist request". This is useful if a point loses their pointlist. Auto Point v1.02 by Roy Hooper and Rick Chartrand Page 4 ______________________________________________________________________________ D I S C L A I M E R The only thing that Auto Point guarantees is to take up some disk space. If it in any way, mangles, garbles, or chokes on something, that is not our problem. When you run this program, you accept all problems that occur from using it. Now that the nitty gritty's over, I haven't had it chew up anything over here, so it shouldn't chew anything of yours. It shouldn't eat netmail messages, shouldn't mangle, garble, or choke on other unrelated programs, but it may. If you break it, you own both halves, just as if you make it screw up your data, it's your garbage. Auto Point v1.02 by Roy Hooper and Rick Chartrand Page 5 ______________________________________________________________________________ C R E D I T S Cheers to Rick Chartrand, for coming up with the concept of Auto Point. Thanks to Roy Hooper, for having the patience and ambition to write the programs for Sumware. Many thanks to Michelle Chartrand for editing these documents for legibility, clarity and accuracy. MUCHO thanks to Fabiano Fabris for pointing that the mailer will only send the mail when the local flag is active in the .MSG file. Auto Point v1.02 by Roy Hooper and Rick Chartrand Page 6 ______________________________________________________________________________ S E T U P In order to get Auto Point working properly, you have to configure it to your setup. The program for configuration is called APCONFIG.EXE. It's very simple to use. Once you activate the program, you'll get a screen with the following fields, all of which should be blank. To fill them in, go up or down with your cursor keys to the desired field, hit <enter> and type the correct information. Hit <enter> to save the information and go on to the next field. ZONE this is the first number in your FidoNet address i.e. X:xxx/xxx NET this is the second number in your FidoNet address i.e. x:XXX/xxx NODE this is the third number in your FidoNet address i.e. x:xxx/XXX BOSSLIST your own, personal, private pointlist (full path - trailing backslashes aren't necessary) POINTLIST location you wish to put the created nodelists for your points. (full path) SYSOP your name BBS NAME the name of your Bulletin Board System KILLSENT this is a toggle function. It determines if the messages APoint creates get deleted after they've been sent to your points or not. Toggle this on to delete mail. DOMAIN this is the domain that your network belongs to, e.g. Fidonet Hit <esc> to save the configuration file, and voila - you're done! Auto Point v1.02 by Roy Hooper and Rick Chartrand Page 7 ______________________________________________________________________________ K E Y I N S T A L L A T I O N When you send in the registration fee, you'll be sent a key which will take out the 5 second delay at the beginning and end of use, and also the beeps. In order to install your key you must use APCONFIG.EXE, where F1 brings up a window that allows you to install your registration key. Auto Point v1.02 by Roy Hooper and Rick Chartrand Page 8 ______________________________________________________________________________ E D I T I N G E N V I R O N M E N T Once fully configured, Auto Point will display a screen with not much on it. Auto Point's keys are listed below: INS Add a Point to the Point DataBase This will pop up a window with a set of editing fields. These editing fields are the information required by Auto Point. POINT is the point number POINTLIST is the name of this point's list to be created. Do NOT add the file extension (e.g. .TXT, .LST.) because APoint does this automatically. NAME is the point's node name LOCATION is the point's location as seen in the nodelist NUMBER is the telephone number BAUD is the baud rate FLAGS are additional information to be added to the pointlist, such as crashmail. What is added here must have commas between each nodelist keyword, and a trailing comma, only if this field is used. This field is optional. For a complete list of available flags, see FLAGS.TXT which is included in this package. PASSWORD is the password that is found on the subject line of a Auto Point nodelist request. See APGEN. NAME, LOCATION, and NUMBER must not have any commas within them or the nodelists will be screwed up! Auto Point v1.02 by Roy Hooper and Rick Chartrand Page 9 ______________________________________________________________________________ E D I T I N G K E Y S Control Keys for data entry boxes: Up/Shift-Tab Previous field. Down/Tab/Enter Next field. F10 Save. ESC Abort. Up Go up an entry/field. Down Go down an entry/field. Controls Keys for the point browsing facility (active upon startup): Alt-D Mark Down/Delete a point. This will mark a point as down, and if hit a second time, will delete the point entirely. If a node is down, it is indicated by an X between the name and point number. (q.v. Alt-U) Alt-E/Space Edit/View a point. This will pop up the same editing box as INS, however it has the information for the selected point filled in. All controls are the same as INS. Alt-Q Quit This will clear the screen and ask you if you want to create the lists. If you answer yes, it will create the separate pointlists and a complete pointlist for you. It will also make the file attach messages. Alt-U Mark Up This will reverse the effects of pressing Alt-D once and will remove the X and Down status in the database. Up/Down Will move from entry to entry. PgUp/PgDown Will move up/down a full screen of entries. Auto Point v1.02 by Roy Hooper and Rick Chartrand Page 10 ______________________________________________________________________________ S W I T C H E S F O R A P O I N T /M Automatically sends previously compiled point list for an unattended node, from a batch file. e.g : :APOINT cd\fd\apoint {directory where APoint is found} apoint /m ----- {reload front door here} Auto Point v1.02 by Roy Hooper and Rick Chartrand Page 11 ______________________________________________________________________________ A P G E N APGEN.EXE is a program that scans your netmail directory looking for messages addressed to Auto Point. It looks at the MSGID created by FD and most other mailers and determines the source of the message. If the source IS the bossnode, it ignores the message. If the source IS NOT the bossnode, APGEN checks the subject line against the password stored in the point database and checks for a match. If there's no match, no nodelist is created. If there's a match it creates a nodelist and file attaches it. This assumes that all other file attaches have made it through, otherwise the user will have duplicate files sent. To use APGEN, you have to put it in the batch file you've got set up for your BBS/Mailer, under the section you import (or toss) your mail. An example of this would be: :START if errorlevel 123 goto TOSS . . . :TOSS cls echo Tossing Inbound Mail Bundles C: cd\qbbs <----- Directory to your mail tosser imail toss cd\fd\apoint <----- Directory to APOINT software apgen goto START APGEN.EXE must be in the same directory as APOINT.EXE and APOINT.PNT files. Auto Point v1.02 by Roy Hooper and Rick Chartrand Page 12 ______________________________________________________________________________ E X T R A I N F O R M A T I O N AND R E G I S T R A T I O N For additional information, send mail to: Roy Hooper 626 Tubman Cres. Ottawa, On K1V 8L6 Canada or send netmail to Roy Hooper @ 1:163/265 To register, a fee of $10 is to be mailed to: Rick Chartrand 2-245 ave des Peres Blancs Vanier, ON K1L 7L8 Canada Upon receipt of your registration fee, your private key will be prepared and sent to you by either netmail or voice. Once you have the key, you will be able to re-run APCONFIG.EXE and install the key. It's saved to APOINT.KEY. This key requires that the information in the following form matches exactly the SysopName and BBSname in APCONFIG.EXE otherwise it will not work. Auto Point v1.02 by Roy Hooper and Rick Chartrand Page 13 ______________________________________________________________________________ R E G I S T R A T I O N F O R M Sysop Name: _______________________________ BBS Name: _______________________________ FidoNet Address: _______________________________ Home Address: __________________________________________ __________________________________________ __________________________________________ __________________________________________ Voice Telephone: _______________________________ Data Telephone: _______________________________ BBS Software: _______________________________ Mailer: _______________________________ Mail Tosser(s): _______________________________ Computer Type: _______________________________ Signature _______________________________ Please make all cheques and money orders payable to Rick Chartrand in Canadian or U.S. Funds only. Keys will not be sent until the cheques clear the bank. (30 day wait period for U.S. drawn personal checks) If you send a cheque, but fail to include this registration form, your cheque will be cashed, but you won't receive a key. You MUST include the form with your cheque in order to be registered and get a key.