home *** CD-ROM | disk | FTP | other *** search
- RYBBS Setup Problems
- --------------------
- The most common problems that I've come across are the following:
-
- Problem Try This!
- ------- ---------
- Program won't start up or This is probably the wrong COM port
- very sluggish Use alternate COM port
-
- Modem won't reset or accept If you have a modem that only has a few
- information from RYBBS program wires you might try to set the NO CTS
- switch in your startup.bbs file.
-
- Local login repeats characters Carrier Detect switch might be set wrong.
- or phrases over and over In a 2400 baud modem you should have the
- &D2 and &C1 modem commands in your
- modeinit.bbs file. (ie AT&C1&D1 etc )
-
- RYBBS starts but you can't Try setting Carrier Detect switch on
- access via local log-on or modem to false (don't force it true!)
-
- Set DTR forced true Set appropriate switch false
- from a modem switch
-
- Zmodem not working You need to get the DSZ program into
- the RyBBS system directory and make sure
- that NO ZMODEM in startup.bbs is disabled
-
- Not enough memory Get more memory
-
- ENTER
-
-