ProfitPress Mega CDROM2 Shareware Freeware (MSDOS)(1992)(Eng)

home *** CD-ROM | disk | FTP | other *** search

/ ProfitPress Mega CDROM2 …eeware (MSDOS)(1992)(Eng) / ProfitPress-MegaCDROM2.B6I / BBS / MISC / IDCCOM12.ZIP / IDCCOM.DOC < prev next >

Wrap

Text File | 1990-09-22 | 175.4 KB | 4,023 lines

================================================= IDCCOM (tm) - FAST-TELECOMMUNICATIONS PACKAGE Documentation for IDCCOM.EXE Written by Gary Conway and Shawn Merrick Infinity Design Concepts, Inc. Louisville, Kentucky Copyright (c) 1990 All rights reserved Version 1.1 ================================================= ================================================= IDCCOM.EXE is a shareware program. IDCCOM.EXE is and will remain the property of Infinity Design Concepts Inc. This program may not be used in any connection with commercial ventures, nor as a sales aid, without the expressed written consent of the author. All rights are reserved. Infinity Design Concepts, Inc. 1052 Parkway Drive Louisville, Kentucky 40217-2333 Voice: (502) 636-1234 Data: (502) 635-5471 CIS: 72657,3006 Member IEEE AOPA NSPE KSPE WINGS All new releases of IDCCOM.EXE and all other IDC software can be located -FIRST- on ; IDC BBS SYSOP - Chuck Crumpton (502)-635-5471 300/1200/2400 24hrs. N81 Louisville, Kentucky 40217-2333 IDCCOM is a trademark of Infinity Design Concepts Inc. ================================================= ================================================= REGISTRATION If you find yourself using IDCCOM, please take the time to do the right thing and that is purchase your copy. You have been provided the opportunity to freely test the program before even thinking about purchasing. This is only fair, so, in fairness, you should reciprocate and purchase your copy, if you continue using the software. Why register ? 1) You get the COMCFG.EXE program for customizing IDCCOM. 2) You get notification of updates to all IDC software. 3) You get online phone support. 4) You get the IDCSYS.EXE, SYSOP control program 5) You get the script language implementation 6) You get FILTANSI program to help in setting up the ANSI/non-ANSI BBS files 7) You get the COMSAVE and COMREST programs which will save/restore IDCCOM's configuration Customers residing outside of the United States of America should send a check or money order drawn on a U.S. bank or in U.S. funds or use a credit card. You will find the registration form in the archive with this document under the name REGISTER.FRM. Please use this form for registration. Infinity Design Concepts, Inc. 1052 Parkway Drive Louisville, Kentucky 40217-2333 Voice: (502)636-1234 Modem: (502)635-5471 The user is granted the right to make unlimited copies of the SHAREWARE versions of the program (except COMCFG.EXE, COMCFG.DOC and IDCSYS.EXE) and to distribute these copies as desired without profit, EXCEPT that Infinity Design Concepts, Inc. reserves the SOLE right to distribute the program(s) for profit. NOTE: COMCFG.EXE and IDCSYS.EXE are NOT shareware programs and may not be released to the general public in any form under any circumstances whatsoever. ================================================= ================================================= TABLE OF CONTENTS Page LIMITED WARRANTY.......................................... 1 LICENSE AGREEMENT......................................... 2 SINGLE PRICING............................................ 3 SITE LICENSING............................................ 3 FOREWORD.................................................. 5 FEATURES AND BENEFITS..................................... 6 INITIAL SETUP............................................. 7 BPS vs BAUD (read me, be wiser)........................... 7 DTE AND DCE (what the heck?).............................. 7 INSTALLATION.............................................. 8 COMMAND AND TERMINAL MODES................................ 9 HELP SCREEN............................................... 9 EDITING USER INPUTS....................................... 9 DIALING DIRECTORY......................................... 10 MODEM RESULT CODES........................................ 10 MODEM STRINGS............................................. 11 FILE PATHS................................................ 11 MACRO KEY DEFINITIONS..................................... 13 COMMAND LINE OPTIONS...................................... 14 CAPTURE FILE.............................................. 14 IDCCOM COMMANDS........................................... 15 DIALING COMMANDS...................................... 15 COMMUNICATION PARAMETERS.............................. 15 EDIT MODEM STRINGS.................................... 15 FILE COMMANDS......................................... 15 TRANSFER COMMANDS..................................... 16 UPLOADING MULTIPLE FILES (via picklist- a must see!).. 16 MISCELLANEOUS COMMANDS................................ 18 SCRIPT FILES.............................................. 18 FILE COMMANDS............................................. 19 VIEW FILE............................................. 19 EDIT FILE............................................. 19 LIST DIRECTORY........................................ 19 DELETE FILE(S)........................................ 19 COPY FILE............................................. 20 RUNNING IDCSHELL(tm)...................................... 20 RUNNING NARC(tm).......................................... 20 MOUSE SUPPORT............................................. 20 EGA/VGA SUPPORT........................................... 20 DIRECT CONNECTING TWO COMPUTERS WITHOUT MODEMS FILES USED BY IDCCOM...................................... 21 HOST MODE................................................. 23 IDCCOM.LVL file....................................... 26 IDCCOM.FDR file....................................... 28 SETTING UP HOST MODE.................................. 29 ================================================= ================================================= IDCCOM.DOR file....................................... 31 USING THE REDIRECT.SYS driver......................... 32 SCREEN BLANKER........................................ 32 DOOR SYSTEM FOR HOST MODE............................. 32 MESSAGE SYSTEM........................................ 33 HOST MODE LOG FILE.................................... 34 SYSOP FUNCTIONS....................................... 34 IDCSYS - SYSOP PROGRAM................................ 35 TRANSFER PROTOCOLS........................................ 35 XMODEM CHECKSUM, CRC and 1K........................... 37 YMODEM and YMODEM-G................................... 37 ASCII................................................. 38 MEGALINK.............................................. 38 ZMODEM................................................ 39 CRC/CHECKSUM ERROR CHECKING............................... 40 HALF/FULL DUPLEX.......................................... 42 HARDWARE AND SOFTWARE HANDSHAKING (RTS/CTS, XON/XOFF)..... 42 COMPUTER TO MODEM SIGNALS................................. 44 COMCFG - CONFIGURATION PROGRAM............................ 45 APPENDIX 1 - modem init strings........................... 46 ZOOM MX2400 PRACTICAL PERIPHERALS PM2400 HAYES 9600 ANCHOR VOLKSMODEM 1200 EVEREX EV-920 1200 APPENDIX 2 - modem result codes........................... 48 APPENDIX 3 - ANSI sequences supported..................... 50 APPENDIX 4 - COM ports and interrupt lines................ 51 APPENDIX 5 - script file language......................... 52 APPENDIX 6 - acknowledgements............................. 55 INDEX..................................................... 56 ================================================= ================================================= LIMITED WARRANTY INFINITY DESIGN CONCEPTS INC. warrants to the original purchaser of IDCCOM that: 1. the diskettes included in the software packages are free from material defects under normal use for three months following their purchase;and 2. the program is properly recorded on the diskettes. Other than as set forth above, INFINITY DESIGN CONCEPTS INC (hereinafter referred to as IDC) makes no warranty of any kind, whether express or implied, regarding the program(s) and disclaims any warranty of merchantability or fitness for a particular purpose. The software program(s) are hereafter referred to as the "Product". The entire risk as to the results and performance of the Product is assumed by you. IDC will not be liable for any damages arising out of your use of, or misuse of the Product, including incidental or consequential damages and loss of profits, even if advised of the possibility of such damages. In particular, IDC shall not be liable for any loss of any programs or data or for the cost of recovering such programs or data. Your sole remedy under this Limited Warranty is to return the materials, all diskettes and documentation to IDC for replacement or refund. This Limited Warranty gives you specific legal rights. You may have other rights which vary from state to state. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. Additionally, some states do not allow exclusions or limitations of implied warranties or limitations on how long any implied warranty lasts, so the above limitations may not apply to you. IDCCOM.EXE is a shareware program. IDCCOM.EXE is and will remain the property of IDC. This program may not be used in any connection with commercial ventures, nor as a sales aid, without the expressed written consent of the author. All rights are reserved. ================================================= Page 1 ================================================= INFINITY DESIGN CONCEPTS LICENSE AGREEMENT What is purchased and Term of License Agreement The program and its related documentation are copyrighted. This license agreement gives your certain limited rights to use our Product. However, you do not become the owner of the Product. IDC retains title to all Products and all copies of Products, including partial copies. All rights not specifically granted are reserved by IDC. You have purchased a non-exclusive right to use the Product pursuant to the terms of this License Agreement. The License that you have acquired is effective until terminated on a breach by you of any of the terms and conditions of this License Agreement. On termination of this License, your right to use the Product ceases immediately. Permitted Uses You may use the Product on any one compatible computer that you own or use, using it on only one computer at a time. The License purchased by you to use the Product includes your personal use and use in your business or profession. Multiple user site licenses are available and have their own license terms. Uses Not Permitted You may not: 1. use the Product in a computer service business, network, timesharing, or multiple user arrangement unless each user is separately licensed by IDC; 2. modify or alter the Product or related materials; 3. translate, reverse engineer, decompile or disassemble the Product; 4. make copies of COMCFG.EXE or IDCSYS.EXE; 5. grant sublicenses,leases,or other rights in the Products to others; 6. remove or obscure any copyright,patent,trademark or other similar notices; 7. export or reexport the Product outside the United States without securing the proper authorization prior to such shipment. ================================================= Page 2 ================================================= SINGLE PRICING Single copy of IDCCOM w/documentation on disk 50.00 Postage and handling inside NORTH AMERICA 3.50 Postage and handling OUTSIDE NORTH AMERICA 7.00 SITE LICENSING If you plan on using IDCCOM(TM) in a corporation, government office, or for any business purpose whatsoever, registration is mandatory. Quantity discounts are available under a Site License agreement, described below. A single MASTER copy of IDCCOM and its documentation will be supplied on disk. The site license customer is responsible for printing the documentation and copying the disk for distribution. Backup copies of the MASTER disk are not counted toward the total copies of the site license. For all site licenses, the customer must appoint a single contact person, who shall be responsible for all contact with IDC. Should a problem occur, that person -- and only that person -- shall contact IDC to report the problem and arrange for its resolution. All product updates shall be forwarded to the contact person. When filling out the registration form, please specify the contact person's name and phone number to prevent any delay in updates and service. SITE LICENSE AND QUANTITY PRICING Quantity Discount -------------------------- 11 - 20 5% 21 - 30 10% 41 - 50 20% 51 - 100 25% 101 - 200 30% 201 - 300 35% 301 - 500 40% 501+ 50% ================================================= Page 3 ================================================= Documentation developed by IDC Principal writer: Gary Conway IDCCOM was developed and programmed entirely in assembler by Gary Conway and Shawn Merrick using the Microsoft MASM 5.1 package and the Norton Editor. The program is comprised of about 25 different modules, representing over 60,000 lines of source code and many, many hours of writing, testing, debugging, arguing, sweating, cussing and listening. All libraries and all routines were developed internally by IDC. Some routines were developed in QuickBASIC or QuickC and then rewritten in assembly language. We at IDC would like to express our gratitude to Hayes Microcomputer products for their kind assistance and generosity in helping us develop IDCCOM for use with the HAYES 9600 bps modems. Information and all elements contained within this product are copyrighted and all rights are reserved by IDC. (c) 1990 INFINITY DESIGN CONCEPTS INC. ALL RIGHTS RESERVED Infinity Design Concepts, Inc. 1052 Parkway Drive Louisville, Kentucky 40217-2333 (502) 636-1234 CIS: 72657,3006 NARC,IDC,IDCshell and IDCCOM are trademarks of Infinity Design Concepts Inc. IBM,IBM-PC, IBM- XT,IBM-AT,IBM-PS/2,Micro Channel Bus, and PC-DOS are trademarks of International Business Machines. MS-DOS is a trademark of Microsoft Corporation. Norton Editor is a trademark of Peter Norton Computing, Inc. CP/M is copyright Digital Research Inc. UNIX is a trademark of Bell Laboratories. Kaypro is a trademark of Kaypro Corporation. ALR is a trademark of Advanced Logic Research. ================================================= Page 4 ================================================= FOREWORD In the ever advancing world of PC software, we have also seen ever advancing file sizes. This is easily understood from the standpoint that new and more advanced features tend to bloat filesize and all too many computer users accept this as a necessary evil and some just don't care at all. There are those who argue that along with the rampant increases in file sizes, we are also seeing increases in resource sizes; ram, hard disks, etc. While this is true, the fact remains that all too many software developers demonstrate a blatant disregard for customer resources. For example, how many communications packages are taking up over 200K on harddisks? IDCCOM is little more than 80K and has all of the same functions (if not more), in a fraction of the space. There can only be two answers to this question; 1. We at IDC are super intelligent extra-terrestial beings or 2. Some software developers are lazy. Well I can tell you with extreme accuracy that the first answer is wrong, so that leaves us with the second. The use of high level languages offers portability, but at the expense of resource space and execution speed. At IDC, we have made the decision that available resources and execution speed are more important than trying to generate sales in several operating environments. The only way to take full advantage of available resources and minimize execution times, is to write in assembler. There is no other language that even compares with the speed of assembler and the infinite number of options that assembler offers for flexibility. Many programmers actually fear assembler, but all software would benefit if all programmers had at least a working knowledge of assembly language. IDCCOM is an interrupt driven communications package for use on IBM PC and compatible computers. Video adapters supported include, MGA, CGA, EGA, VGA, MCGA and HERCULES adaptors. BPS rates of up to 19,200 bps are supported as well as any I/O port configuration. ================================================= Page 5 ================================================= FEATURES AND BENEFITS OF IDCCOM o allows multiple phone directories o circular dialing cue via tagged phone numbers o capture mode will capture/filter our ANSI sequences o powerful picklist capabilities for uploads, downloads and deleting o SMALL and FAST (easy on your resources) o Microsoft and compatible mouse support o EGA/VGA color support o full featured BBS program, including multiple file areas multiple access levels log file with SYSOP error messages for debugging date sequenced log file automatic ANSI filtering (no need for two sets of bulletins and message files) message system uses a message database, as opposed to single files for each message as found in some BBS software This amounts to a HUGE savings in YOUR disk space o only ONE file needed to run the entire system ! o self-configuring o V.42 support o ZIPVIEW (tm) BBS zip file viewer o SYSOP control program for registered SYSOPS o XMODEM, YMODEM, YMODEM-G, ZMODEM, MEGALINK, ASCII file transfer protocols are all built in and extremely robust, plus two external protocols of your own choosing o run NARC (tm) directly from IDCCOM to view/print/extract newly uploaded/downloaded zipfiles o run IDCSHELL (tm) directory from IDCCOM for full disk management and zipfile creation o COM 1 thru COM 4 support (completely configurable) o interrupt driven serial port access o HELP always available o pull down window, point and shoot command access o BPS rates thru 19200 BPS o SUPERIOR file transfer progress reporting, file size, time etc. o script file language o screen blanker o ANSI driver built in o Extremely robust HOST mode, will not leave your hard disk with fragmented clusters in the event of power outage or other common BBS type hangups ================================================= Page 6 ================================================= INITIAL SETUP IDCCOM was designed to be the easiest and most forgiving of all the telecommunications software as far as initial setup. The first time the program is run, it walks you through the setup, showing every step of the way. WHAT YOU NEED TO HAVE HANDY WHEN RUNNING IDCCOM THE FIRST TIME 1. The COM port number that your modem is connected to. (See APPENDIX 4) 2. The maximum bps "baud" rate your modem supports. 3. Your modem initialization string. (See APPENDIX 1) 4. Your modem result codes. (See APPENDIX 2) BPS vs BAUD Among the MANY misnomers in the telecommunications community, BPS (bit per second) and BAUD (from J.M.E BAUDOT, inventor circa 1903) are two of the leaders in gross misuse and misunderstanding. BAUD is the number of SIGNALS sent per second. BPS is the number of BINARY DIGITS of data (represented as sound) per second. BPS is simply the data rate. For example, at 300bps (Bell 103 standard), BPS and BAUD are the same; there are 300 signals per second (BAUD) and 300 bits per second (BPS). However, at 1200bps, via Bell 212A standard, there are two channels, each operating at 600 BAUD, but throughput is 2x600 = 1200 bps. For these reasons of accuracy, IDCCOM uses the term BPS rate, not BAUD, when referring to the modem and DTE/DCE speeds. For example, your modem is 1200/2400/4800/9600 BPS, not BAUD! DTE AND DCE DTE stands for DATA TERMINAL EQUIPMENT, which usually for BBSing, is the computer, e.g. the data terminal. DCE stands for DATA COMMUNICATIONS EQUIPMENT, which is most cases for BBSing, is the modem. ================================================= Page 7 ================================================= INSTALLATION Installation of IDCCOM is a real snap compared to other communications packages. Simply create a directory for the files and copy all files into the directory. Change to that directory and type IDCCOM (ENTER) and the program will step you through the initial setup, creating all the necessary files. You may skip any of the steps without saving your data, but it is highly suggested that all necessary information be entered. This is particularly important if you want IDCCOM to perform correctly! The following assumes that the IDCCOM files are located on a diskette in A: drive and you wish to install the programs to C: drive. <ENTER> means that you should press the ENTER key on your keyboard. EXAMPLE SEQUENCE: A: <ENTER> MD C:\IDCCOM <ENTER> COPY A:*.* C:\IDCCOM <ENTER> C: <ENTER> CD \IDCCOM <ENTER> IDCCOM <ENTER> From here, you will simply follow the on screen prompts and fill in the appropriate information when requested. Don't be afraid to experiment, you cannot hurt anything! ================================================= Page 8 ================================================= COMMAND AND TERMINAL MODES The first thing to note about IDCCOM is that there are two modes of operation; COMMAND MODE and TERMINAL MODE. TERMINAL MODE is the mode where you are "ON-LINE" and all characters sent to the screen are also sent to the modem. Also all characters that you type will be sent to the modem. COMMAND MODE is where commands may be issued to IDCCOM. The ESCAPE key toggles between command mode and terminal mode. In this mode, the pull down windows are on screen. When IDCCOM first comes up, you will be in terminal mode, that is, every character that you type, will also go to the modem and every character that comes from the modem will be displayed on the screen. You can get to command mode by pressing the ESCAPE key. The main pull down windows will be displayed and you may execute any of the functions by either navigating with the arrow keys, highlighting the desired command and pressing ENTER - OR- you may use the characters that are displayed in the square brackets in the windows as shortcut keys. Any time the menus are up (command mode), you may press any of the shortcut keys, no matter which window is currently pulled down. HELP ALWAYS AVAILABLE As with all IDC software, the F1 key is the help key and may be used just about anywhere in the program to invoke a help screen, that lists all of the commands available for the task at hand. EDITING USER INPUTS There are many times during the execution of IDCCOM, that you will be asked to enter textual responses. There are several editing commands available in all of the dialogue boxes. CONTROL-Y - erase entire line ================================================= Page 9 ================================================= BACKSPACE - delete the character left of the cursor ESCAPE - abort the operation DIALING DIRECTORY The dialing directory can be invoked from command mode by pressing the "D" key, or by highlighting "directory" under the DIALING window and pressing ENTER. The dialing directory allows you to store up to 100 phone numbers, along with various other information, including; 1. total number of times called 2. total time on each system 3. last date and time called 4. password used for each system 5. default up/down load protocol 7. parity, data bits and stop bits 8. BPS rate You may also "tag" any or all of the entries. Tagged files are used when using the CIRCULAR DIALER command. Each tagged entry will be dialed in order, until a connect is made or until the opera tion is interrupted by the ESCAPE key. MODEM RESULT CODES (see also APPENDIX 2 - result codes) Modem result codes are a means for the computer and software to understand the current status of the modem and phone line. When the modem connects to a remote system, a result code is sent to the terminal, such as CONNECT 2400, or BUSY etc. It is important that the modem result codes and text be set up correctly for your modem. Most modems can be configured to send either NUMERIC or VERBOSE result codes. You may use either, but we recommend that you use the VERBOSE method, since it is easier to understand what CONNECT 1200 means, as opposed to a numeric value of "5", for example. When entering the modem result codes in IDCCOM, remember that you must enter the NUMERIC code first, then a comma, and then the VERBOSE text EXACTLY AS IT APPEARS IN YOUR MODEM MANUAL. ================================================= Page 10 ================================================= MODEM STRINGS (see also APPENDIX 1 - modem strings) The modem init strings are used to set the modem up for specific operations. Note that some modems will not accept mixed case, that is AtdT, for example, consult your modem manual. INIT STRING is sent to the modem when IDCCOM is first invoked, or when you select the INITIALIZE MODEM command from the menus. (IMPORTANT NOTE: the modem must be set up to echo characters back to the computer, usually this is done with the E1 command.) DIAL STRING is sent to the modem before dialing any phone numbers, it will usually be something like ATDT for tone dialing, or ATP for pulse dialing. HOST STRING is used to set up the HOST mode. HANGUP STRING is used just in case your system does not support the DTR signal. Normally, the preferred method for hanging up the modem is to drop the DTR signal for a specific length of time and that will cause the modem to disconnect from the phone line. In order for this to work, the cable between the computer and modem must have the DTR wire installed and the modem must be configured for DTR to be active. On HAYES and compatible modems, this is usually accomplished with the &D2 command. On systems where the &D2 command is not available, the hangup string will accomplish the same purpose. RESET STRING is used to reset the modem. It is sent when IDCCOM is first invoked and again after each call in HOST mode. FILE PATHS The file paths window lets you configure IDCCOM so that it knows where to find and/or place files. The paths that you configure here are stored in the PATHNAME FILE, where the default filename is IDCCOM.PTH in the current directory. ================================================= Page 11 ================================================= PHONE DIRECTORY FILE This entry gives the name and optionally the directory where the phone directory file will be located. The default value here is IDCCOM.DIR. MACRO FILE This entry gives the name and optionally the directory where the macro key file is located. The default value here is IDCCOM.MAC. MODEM STRING FILE This entry gives the name and optionally the directory where the modem string file is located. The default value here is IDCCOM.MDM RECEIVE PATH This entry gives the subdirectory where files will be stored when they are received from a remote system, in either terminal or host mode. TRANSMIT PATH This entry gives the subdirectory where files are stored that are to be transmitted by IDCCOM. PATHNAME FILE This entry gives the name and optionally the directory where the paths will be stored. The default name is IDCCOM.PTH in the default directory. RESULT CODE FILE This entry gives the name and optionally the directory where the modem result codes will be stored. The default name is IDCCOM.RES. EDITOR PATHNAME This entry will tell IDCCOM where to find your editor. You must include the complete filename, e.g. C:\WS\WS.EXE IDCSHELL (tm) This entry will tell IDCCOM where to find IDCSHELL. ================================================= Page 12 ================================================= You must include the complete filename, e.g. C:\IDC\IDCSHELL.EXE NARC (tm) This entry will tell IDCCOM where to find NARC. You must include the complete filename, e.g. C:\IDC\NARC.EXE ZIPVIEW (tm) This entry will tell IDCCOM where to find ZIPVIEW.EXE. You must include the complete filename, e.g. C:\IDC\ZIPVIEW.EXE. MACRO KEY DEFINITIONS IDCCOM allows configuring 10 macro keys, ALT-F1 through ALT-F10. You may enter any text you like here. Note that to include a carriage return at the end of a string, you would insert the "|" character where you want the carriage return. Any control or ALT-xxx characters may also be used in macros. You may use any of the macro keys to send repeated strings of characters to the modem and to the screen. You might want to store your name, address and phone number here to make it easier when logging into new boards. NOTE ON SPECIAL CHARACTERS IN MACROS: The "|" character may be used in any macro key to send a carriage return character and the %P or %p characters may be used to cause the macro key to send the password for the currently dialed number. As a result, these characters may not appear anywhere else in your macro keys, as they will always be interpreted as described above. There is another macro key, F10, which sends the current password from the dialing directory for the number that was last dialed. This macro key is not configurable. Note that a carriage return is NOT automatically sent after this command. ================================================= Page 13 ================================================= COMMAND LINE OPTIONS There are several options that may be used when invoking IDCCOM from the command line. These options provide information to IDCCOM for startup. The options: /Q - tells IDCCOM not to send modem init strings FILE.SCR - tells IDCCOM to start the script file named FILE.SCR immediately CAPTURE FILE The capture feature of IDCCOM allows capturing data that is received over the modem and storing that data to a file. The capture mode of IDCCOM is turned ON/OFF from the pull downs, or with the K key. When turning the capture mode ON, IDCCOM will display the default capture filename (IDCCOM.CAP) and ask you if you want to change it. If you answer YES, then IDCCOM will ask for the new filename. If the file already exists, then new captured data will be appended to the existing file. When capture mode is toggled OFF, IDCCOM will ask how you wish to dispose of the characters that were captured, as follows; PAUSE - pause the capture for resuming later SAVE - save the data to the specified file ERASE - erase all data in the capture buffer ESCAPE- disregard the toggle OFF command Note that capture has two modes, 1. capture all characters that are received, including ANSI sequences, or 2. filter out all ANSI sequences and capture only the text. This option is toggled from the pull downs or with the 3 key in COMMAND MODE. ================================================= Page 14 ================================================= IDCCOM COMMANDS (short-cut keys) DIALING COMMANDS A - invokes IDCCOM's host mode and waits for calls D - brings up the dialing directory screen H - hangs up the modem by dropping DTR and sending the hangup string to the modem L - sends modem init string to the modem R - redial the last number dialed O - continuously dials all tagged phone numbers until a connection is made COMMUNICATION PARAMETERS B - toggles between all available BPS rates 300-19200 S - toggles number of stop bits 1 or 2 U - toggles duplex mode from HALF to FULL Y - toggle between all valid combinations of the above 0 - toggle between all available port numbers (1-4) 5 - toggle XON/XOFF software handshaking ON and OFF 6 - toggle RTS/CTS hardware handshaking ON and OFF 2 - toggle result mode between NUMERIC and VERBOSE 8 - toggle FORCED CARRIER (for direct connect) NOTE: the "8" command above, will toggle between a carrier active mode and a forced carrier mode. If you wish to connect two computers together directly, you can use a NULL-MODEM cable and toggle FORCED CARRIER ON, so that the software is fooled into thinking that carrier is present. See the section entitled "DIRECT CONNECTING TWO COMPUTERS WITHOUT MODEMS". EDIT MODEM STRINGS E - edit HOST MODE,DIAL,HANGUP and INIT strings for modem 7 - edit modem result codes FILE COMMANDS F2 - display files list of specified drive/path F3 - view a file w/PgUP,PgDn,Home,End and arrow keys F4 - send a file to the parallel printer LPT1: F6 - copy a file F7 - delete file(s) (with picklist) F9 - edit a file with your editor (set path in PATH screen) ================================================= Page 15 ================================================= TRANSFER COMMANDS PGUP - invokes protocol selection menu for UPLOADING PGDN - invokes protocol selection menu for DOWNLOADING UPLOADING FILE(S) When uploading files is chosen with the PGUP key from terminal mode a window will pop up that shows all of the currently available transfer protocols. If you have made the call from the dialing directory or the circular dialer, then the highlight bar will be on the default protocol you have selected for that BBS. You may then select the protocol desired from the list by pressing ENTER. UPLOADING MULTIPLE FILES After the protocol has been selected, a dialogue box will appear asking for the filename(s) to upload. You may enter a filename or filenames separated by spaces. Each filename may be complete with drive and path, or a wildcard mask -OR- you may press the ENTER key (enter nothing) and a listing of files will be displayed where you may "tag" files that you wish to upload. The files that are displayed by default are those in your TRANSMIT directory (see the FILE PATHS) section. You may also then use the "D" command from the picklist and change drive/directory/filemask. The F1 key will display all commands that are available for the picklist. PICKLIST COMMANDS. F1 = display help screen H = display help screen ? = display help screen F6 = tag all entries F7 = invert tag status of all entries ESC = abort upload ENTER = tagging complete, proceed with upload SPACE = toggle tag status of current entry D = enter new drive/directory/mask T = tag current entry U = untag current entry W = enter wildcard filemask and tag all matching files ================================================= Page 16 ================================================= You may also use the arrow keys, PGUP,PGDN,HOME and END keys for list navigation. The picklist will display the total number of tagged files, total number of tagged bytes and the estimated upload time at the current BPS rate. DOWNLOADING FILE(S) After selecting the download function with the PGDN key and selecting a protocol, depending on whether or not the protocol is a batch protocol or not, you will be asked for a filename for your machine. If the selected protocol is a batch transfer protocol (MEGALINK,YMODEM,ZMODEM etc.), then you will not be asked for a filename for your machine. All files that are downloaded will be sent to the default RECEIVE directory, unless a path is entered when you are asked for the filename, in which case, the path entered will be used as opposed to the default RECEIVE directory. EXTERNAL PROTOCOLS (EXTERN1 AND EXTERN2) IDCCOM provides a means for using external file transfer protocols, via two batch files. EXTERN1.BAT and EXTERN2.BAT. When one of these protocols is selected from the transfer window, IDCCOM executes the appropriate batch file. Arguments are passed to the batch files in the following order, %1 = BPS (300/1200/2400/4800/9600/19200) %2 = COMPORT (1-4) %3 = S or R (send or receive) %4 = download path (path or NOT USED) %5 - %9 = wildcard filename(s) to send or recv See EXTERN1.BAT and EXTERN2.BAT for examples of how to use the passed parameters. To set one of the batch files up for DSZ and the zmodem protocol, you would use the following. IF %3x=Rx GOTO RECEIVE REM must be sending DSZ port %2 speed %1 %3z %4 %5 %6 %7 %8 %9 GOTO DONE :RECEIVE DSZ port %2 speed %1 %3z :DONE ================================================= Page 17 ================================================= MISCELLANEOUS COMMANDS C - clear the screen F - view/edit IDCCOM PATHS (upload,dnload,idcshell,narc,zipview etc) I - execute IDCSHELL (path must be set up with "F" command) J - toggle auto-linefeed mode ON and OFF M - view/edit macro key assignments N - execute NARC (path must be set up with "F" command) V - display version of IDCCOM X - exit IDCCOM 4 - toggle between 25 and 43 or 50 line screen modes G - start the timer K - toggle capture mode ON and OFF P - toggle printer echo ON and OFF T - show elapsed time since timer was started with "G" command 3 - toggle ANSI capture ON and OFF Z - ZIPVIEW (tm) F5 - shell to DOS F8 - show serial base port address and Int # F10 - send current password stored in phone directory for the number just dialed SCRIPT FILES (NOT SUPPORTED IN SHAREWARE VERSION) IDCCOM supports script files and a script file language that make logging onto boards somewhat easier. When you create an entry in the dialing directory, you may also specify the name of the script file that you wish to have associated with that entry. When the number for the entry is dialed, the script file will be read automatically and the instructions in the file will be executed. The default file extension for the script files is .SCR, but you may override this by including any extension that you wish when you create/edit the dialing directory entry. For a listing of the supported script language commands, see APPENDIX 5. The script file itself, is merely a text file that you may create with any text editor. You would then write in the commands that you want executed when the script file is run. We have supplied several example script files with the IDCCOM package, so you may want to refer to those files in conjunction ================================================= Page 18 ================================================= with APPENDIX 5 to see just how to set one up. A script file may also be supplied on the command line when IDCCOM is invoked, IDCCOM HOST.SCR This would cause the HOST script file to be executed when IDCCOM loads. NOTE that the ESC key will abort a script in progress. FILE COMMANDS VIEW FILE This command will ask for a filename to view and then display the file on the screen a page at a time. Movement through the file is accomplished with the standard editing keys, Home, End, PgUp, PgDn and the arrow keys (or the mouse). The end the view, simply press ESCAPE. EDIT FILE The edit command will call YOUR editor. In order for IDCCOM to locate your editor, you must set the correct path with the FILE PATHS command. LIST DIRECTORY The list directory command will ask for a filemask, you may enter a complete drive:\path\filespec or by simply pressing ENTER will display all files in the current directory. DELETE FILE(S) The delete file command will ask for a filename and then delete it. You may enter a complete drive:\path\filespec. You may optionally press the ENTER key without entering a filename and the picklist will appear. You may then tag files that you want to delete. Pressing ESCAPE will abort without deleting any files. ================================================= Page 19 ================================================= COPY FILE The copy file command will ask for a filename to copy and a destination drive:\path\filename. RUNNING IDCSHELL (tm) IDCshell may be executed directly from IDCCOM with the "I" command or by highlighting IDCSHELL in the MISC window. In order for IDCCOM to find IDCSHELL, you must set the correct path with the FILE PATHS command. RUNNING NARC (tm) NARC may be executed directly from IDCCOM (great for viewing those ZIP files after you download!). In order for IDCCOM to find NARC, you must set the correct path with the FILE PATHS command. MOUSE SUPPORT As with all IDC software, mouse support is provid ed. If a mouse driver is detected, IDCCOM will invoke the mouse support system. The left mouse button emulates the ENTER key and the right mouse button emulates the ESCAPE key and mouse movement emulates the arrow keys. Any mouse that adheres to the MICROSOFT MOUSE STANDARDS will work. EGA/VGA SUPPORT Users with EGA or VGA video cards can take advan tage of 43 screen lines in EGA mode or 50 lines in VGA. From COMMAND MODE, press the "4" key or high light the selection under the MISC window and press ENTER. If an EGA or VGA card is detected, the video mode will be toggled between 25 and 43/50 line modes. Note that if you exit the program in 43/50 line mode, then IDCCOM will remember this the next time the program is executed and return to the same mode. When IDCCOM is invoked, it saves the current video mode and resets this same mode when the program is exited. ================================================= Page 20 ================================================= DIRECT CONNECTING TWO COMPUTERS WITHOUT MODEMS IDCCOM will allow you to connect two computers together without the use of modems via a NULL modem cable. This feature is very painless to use. Simply FORCE CARRIER with the "8" command or from the pull down windows and connect the computers serial ports together through a NULL modem cable. You may then transfer files very easily and quickly with the picklist windows available from the upload window. FILES USED BY IDCCOM FILES USED BOTH IN TERMINAL AND HOST MODE Files created automatically by IDCCOM IDCCOM.DIR - phone directory file IDCCOM.MAC - keyboard macros IDCCOM.PTH - paths for files IDCCOM.MDM - modem strings IDCCOM.RES - modem result codes IDCCOM.CAP - capture file HOST MODE FILES Files created/modified/used by SYSOP ANSI screens LOGONSCR.BBS - main welcome screen at logon MAINMENU.BBS - main menu for host mode IDCCOM.HLP - caller command help screen FIRSTCAL.BBS - help file displayed to first time callers FILES.BBS - directory listing file (one for each directory) PROTOCOL.BBS - show available transfer protocols PROTOCOL.HLP - help file, describing transfer protocols IDCDOOR.MNU - menu file for door system BULLET.MNU - bulletin system menu MESSAGE.HLP - ANSI help file for message system LOGOFF.BBS - ANSI file displayed at user logoff BULLETxx - bulletin xx file (00-99) Plain text files ================================================= Page 21 ================================================= IDCCOM.LVL - user level/function mapping file IDCCOM.FDR - user level/directory mapping file IDCCOM.DOR - user level/door mapping file IDCDOORx.BAT - doors 0-9 execute via batch files ZVIEW.BAT - batch file to run ZIPVIEW DOSSHELL.BAT - batch file for executing DOS shell Files created automatically by IDCCOM IDCCOM.MSG - message base file IDCCOM.HDR - message file index IDCCOM.USR - caller file, all callers to system IDCCOM.LOG - host mode caller activity log NEWUSERS.BBS - names of those who have answered sign on questionnaire in host mode External files ZIPVIEW.EXE - IDC's door program for viewing zipfiles online IDCSHELL.EXE - IDC's DOS shell and zipfile builder NARC.EXE - IDC's zip/arc file extractor,viewer etc. REDIRECT.SYS - serial device driver for local echo for sysop during external doors/shell to dos COMSAVE.EXE - program which saves IDCCOM configuration to separate file, IDCCOM.CFG COMREST.EXE - program which reads IDCCOM.CFG file and restores IDCCOM'S configuration FILTANSI.EXE - program which will display an ANSI file, filtering out any ANSI sequences. Particularly useful to the SYSOP when building the host mode menu, bulletin and help files. ROLLDATE.COM - TSR that will change the DOS date at midnight on XT,AT, PCjr and PS/2 class machines (necessary since the DOS time will roll over at midnight, but not the DOS date) You may set the following text files up so that they may not be aborted with CONTROL-C or CONTROL-K by inserting a CONTROL-T character as the FIRST character on the FIRST LINE of the file. LOGONSCR.BBS IDCCOM.HLP MAINMENU.BBS FILES.BBS PROTOCOL.BBS ================================================= Page 22 ================================================= IDCDOOR.MNU BULLET.MNU BULLETxx LOGOFF.BBS MESSAGE.HLP FIRSTCAL.BBS You may also insert a "More" message at any point in any of the above files by inserting a CONTROL-E in the file where the more prompt is desired. HOST MODE The host mode included with IDCCOM is a complete BBS system. Included is password protected logon, user time limits, user call limits, validation procedures, access levels, multiple file directories, help and a bulletin system. UNIQUE FEATURES OF HOST MODE One of the several unique features of host mode is the ability of using single files for the menus, help screens, files screens and bulletins. Some BBS software forces the SYSOP to maintain two sets of files for the above information, one for ANSI and one for NON-ANSI, however, IDCCOM needs only a single ANSI set. When a user logs on and chooses NON-ANSI, then the files are stripped of their ANSI sequences before they are displayed. Another excellent feature for the SYSOP, particularly at setup time, is the IDCCOM.LOG file and the error messages that are entered there for the SYSOP. When errors are encountered processing critical files such as IDCCOM.LVL (access level file) and IDCCOM.FDR (file directory access mapping file), then an entry is made in the IDCCOM.LOG file that describes the error, shows the offending filename and shows the offending line in that file. A running log file "IDCCOM.LOG" is created and logs all caller activity. The IDCCOM.LOG file is an ASCII file that may be edited with any word processor. Entries are made in this file that describe log on/off time, transferred files and error messages for initial setup debugging and functions performed or denied. ================================================= Page 23 ================================================= AUTOLOGOFF If a caller stays on line for more than 5 minutes and no characters are received, the system assumes the caller has fallen asleep and is automatically logged off. The system will then reset and wait for the next caller. An appropriate message is entered in the IDCCOM.LOG file. LOGGING ON The IDCCOM logon sequence allows for protocol negotiation when connecting MNP to NON-MNP modems. This is accomplished by inserting a 10 second pause after carrier is detected. If the caller presses the ENTER key, then the pause is bypassed and the logon sequence is begun, or the logon is automatically begun in 10 seconds. This 10 second period allows for the negotiation strings to be ignored in the case of MNP to NON-MNP modem connections. When IDCCOM answers the phone, it will ask the caller if his system can display ANSI graphics. If the answer is yes, then all menus and bulletins that have been drawn in ANSI will be displayed in ANSI. If the caller answers no, then ANSI sequences will be filtered out of the menu, bulletin, help and directory files before they are sent to the modem. New callers will be asked for name, address, phone, city, state and zip before proceeding. This information is then written to the NEWUSERS.BBS file, which can then be used to automatically validate callers with the IDCSYS program. TWO MINUTE WARNING When the caller is within two minutes of expiring his daily time limit, a bell and a two minute warning message will be displayed. THE ANSI DRIVER IDCCOM has a complete ANSI driver built in so there is no need to load ANSI.SYS in the CONFIG.SYS file. This is done to avoid having callers send ANSI sequences which may be destructive to the host system, key remapping, for example. For a complete listing of the supported ANSI sequences, see APPENDIX 3. ================================================= Page 24 ================================================= DOS DATE Since DOS rolls the time ONLY over at midnight, the DATE is left behind. Since IDCCOM relies on the DOS date for user call limits, it is necessary that the date always be correct. In order to overcome this shortcoming of DOS, we have supplied a TSR program called ROLLDATE.COM, simply have it execute at boot from your AUTOEXEC.BAT file. HOST MODE COMMANDS F - file finder, locates a file in any directory that caller has available for his access level P - page sysop. Allows caller to page the sysop for a chat, if callers access level permits M - message system. Allows user to enter message system, if messages are available for his access level B - bulletin system. Displays BULLET.MNU file and caller may then select BULLETxx file for display U - upload file(s). If callers access level permits D - download file(s). If callers access level permits C - change directory. Allows user to enter any directory that is available for his access level L - list files. Displays FILES.BBS file in current directory. H - displays IDCCOM.HLP file A - toggle ANSI graphics on and off X - toggle expert mode on and off. When ON, the IDCCOM.MNU file will be displayed after each command T - type file. Allows caller to type files to the screen in the current directory, if his access level permits Z - execute ZIPVIEW (tm). If callers access level permits, ZIPVIEW allows viewing the contents of ================================================= Page 25 ================================================= zip files G - goodbye, hangup, end session S - shell to DOS. Allows caller access to DOS on the local system if his access level permits. This command is available to SYSOPS (A access level) by default. O - DOOR system, if caller has access. The IDCCOM.DOR file is used to map caller access levels to the DOORS. The IDCDOOR.MNU file is displayed and users can select the door to enter. IDCDOORx.BAT files are used to execute each of the doors mapped by the IDCCOM.DOR file. HOST MODE DIRECTORIES The host mode allows using many subdirectories. Each subdirectory is assigned an access level (or levels) that is the required minimum for access to that directory. When a caller first logs on to the system, he will be in the MAIN directory. This directory is defined in the FILE PATHS section under the TRANSMIT directory. This directory will always be available to all callers, however, their upload, download and viewing access will be limited by their access level assignment. Other directories can be set up using the IDCCOM.FDR file (see that section in the manual). Once a caller changes directory (assuming his access level permits this function), all file activities will take place in that directory. IDCCOM.LVL file The host mode requires that the SYSOP establish access levels for each caller. This can be automated using the IDCCOM.LVL file. There are 26 levels of access that may be used, represented by the letters A-Z, with A being the highest level of access and Z the lowest. Note that if lower case letters are used in the IDCCOM.LVL file, they are automatically converted to upper case. The A level is permanently set to SYSOP level and may not be changed. The A level is reserved and any caller with an A level has access to the complete system, including the DOS shell, so give this level out sparingly and only to trusted friends. ================================================= Page 26 ================================================= This file is used in host mode to determine the access levels and the functions that are allowed for each level. Each line defines an access level and the allowed functions for that level. For example: [N] DN,UP,TF This would allow all users with an "N" access level access to DOWNLOADS, UPLOADS and TYPE FILE functions. Access levels may range from A-Z. IDCCOM does not distinguish between upper and lower case, therefore either may be used. The functions definable for access levels are, DO - DOS shell access allowed UP - uploads allowed DN - downloads allowed MS - allowed to read and send messages FI - files display access CH - chat function access ZV - ZIPVIEW (tm) access TF - type file function access CD - change directory access FF - find file DR - door system access BU - bulletin system access PR - create private mail There are two entries that have special meaning and are formatted a little bit differently than as explained above. [X] VALID (4,60) UP,DN,MS,FI,CH,ZV,TF [Z] NEW (2,30) MS,CH,TF Notice the two keywords VALID and NEW. These are used to tell IDCCOM what access level to associate with NEW callers and VALIDated callers. If these two entries are not found in the IDCCOM.LVL file, then they are set as shown above by default. Note also, that the "A" access level is reserved for SYSOPS and ALWAYS has access to ALL functions, including DOS and the access attributes for this level are fixed and will not be changed by the IDCCOM.LVL file. ================================================= Page 27 ================================================= EXAMPLE FILE: ; this is a comment line ' this is also a comment line * this is another comment line [C] (4,60) UP,DN,TF,MS,CH,ZV [D] (2,60) UP,DN,DO [M] VALID (2,20) UP,DN,MS [X] NEW (1,15) MS,CH,TF IDCCOM.FDR file This file created by the SYSOP to map access levels to specific file directories. Each access level may have its own special directories for files. IDCCOM is set up in a hierarchical fashion, such that all B access level callers have access to all directories that have C-Z access callers have, all G level callers have access to H-Z, etc. The format for each line in the file is as follows; [ACCESS_LEVEL] [DESCRIPTION] [FULL_PATH_NAME] Comments are also allowed in this file, with the same syntax as in the IDCCOM.LVL file. See the IDCCOM.FDR file for more information and examples. An example file might be, [B] [GENERAL UTILS] [F:\UTILITIES] [Z] [GENERAL FILES] [F:\IDCCOM\GENERAL] These lines would assign specific directories to callers with access level B and Z. Note that these assignments represent the MINIMUM access level required to gain access to the directory, i.e. all B level callers will not only have access to F:\UTILITIES but will also have access to F:\IDCCOM\GENERAL. You can make a given directory private to any given access level by inserting an equal sign after the access level. For example, [Z=] [GENERAL FILES] [F:\IDCCOM\GENERAL] This line will allow ONLY Z level callers access to the F:\IDCCOM\GENERAL directory. Note that the SYSOP (level A) always has full access to all directories (even those with the equal sign). ================================================= Page 28 ================================================= SETTING UP HOST MODE The host mode provided with IDCCOM is extremely flexible in its setup. You can spend some time and really get it tweaked to perfection, or you can run it immediately out of the box with little or no setup. The choice is yours depending on what your intended use of the BBS system is. One of the many aids that IDCCOM provides in setting up the host mode is error messages written to the IDCCOM.LOG file when errors are encountered during debugging the initial setup or when errors actually occur during host mode online operation. When these errors occur using the IDCCOM.FDR and IDCCOM.LVL files (see their sections in the manual), not only the error message is written to the log file, but also the offending line so you may easily see just why the error occurred. The following files are supplied as samples with the IDCCOM package and may be used as is, but you will probably want to change the text and/or colors in some of them. LOGONSCR.BBS - host mode welcome file (sign on screen) MAINMENU.BBS - main menu file IDCCOM.HLP - caller command help screen PROTOCOL.BBS - show available transfer protocols LOGOFF.BBS - logon screen MESSAGE.HLP - message system help file These two files must be setup to match your system. See the sections in the manual on setting up these files and examine the files themselves for examples. IDCCOM.LVL - user level/function mapping file IDCCOM.FDR - user level/directory mapping file When setting up the file directories, you should first establish how many access levels you will need. For example, the SYSOP will have level A, a new caller might have level Z, a validated caller might have level X and a trusted friend might have level B. Translating this for the IDCCOM.LVL file, we might have, ================================================= Page 29 ================================================= [B] (5,100) DN,UP,FI,CH,CD,TF,MS [X] VALID (4,60) DN,UP,FI,CH,CD,TF,MS [Z] NEW (2,30) CH,MS The first line establishes the parameters and functions available for level B callers. The B level caller will have 5 calls per day for a total of 100 minutes per day. He can download, upload, chat, list files, change directories, type files and enter messages. You may establish as many as 26 access levels, ranging from A to Z inclusive. If you are going to have multiple file directories, then you will also need to set up the IDCCOM.FDR file. This file establishes which directories a given caller has access to. Each directory is given a minimum access level that is required to gain access. For example, [B] [For friends only] [F:\DOS] [X] [Validated callers] [F:\IDCCOM\UTILS] This mapping context will allow callers with an X access level, access to the F:\IDCCOM\UTILS directory on disk. They may TYPE FILES, LIST FILES and DOWNLOAD files from this directory when online. The B level callers, will have access to the F:\DOS directory AS WELL AS access to all levels below it. In this case the F:\IDCCOM\UTILS directory also. Note that there is one exception to this and that is the following case, [D=] [Special friends] [F:\SYSTEM] If this line is added to the lines above, then ONLY level D callers will have access to the F:\SYSTEM directory, the B level users will not. Note, however, that the SYSOP (A level) callers will always have access to every directory. You will also want to make sure that your ANSWER MODE string is set, see the MODEM STRINGS section. To make HOST mode fully automatic, you will want to set up the AUTOEXEC.BAT file so that IDCCOM is executed at boot time and include the REDIRECT.SYS driver in your CONFIG.SYS file. We also highly recommend that you set up the AUTOEXEC.BAT file so ================================================= Page 30 ================================================= that it runs CHKDSK each time it boots. This can be done with full automation using the YESNO program from IDC located in the IDCUTILS package. Notice that the /F option is included in the CHKDSK line below and that usually CHKDSK will wait for a Y or N answer. Since this is not desirable since the SYSOP will more than likely not be present when the system is forced to reboot, this line must be automated to feed the necessary response to CHKDSK. The YESNO program does just that. This step will eliminate any lockups and/or disk fragmentation that might occur if the board is interrupted by a power outage at a critical time. SAMPLE AUTOEXEC.BAT file: ECHO OFF CLS REM YESNO.COM is located in the IDCUTILS package REM the next line will run chkdsk and fix and lost REM clusters automatically YESNO "Y" 13 | CHKDSK /F REM next, install the midnight rollover function ROLLDATE CD\IDCCOM IDCCOM HOST.SCR SAMPLE CONFIG.SYS file for COM1: SHELL=C:\COMMAND.COM C:\ /P BREAK=OFF DEVICE=REDIRECT.SYS 1 FILES=20 BUFFERS=15 NOTE: the HOST.SCR file contains a single line consisting of the word HOST IDCCOM.DOR file This file is used to map door numbers to descriptions. These descriptions are displayed to the host mode caller when the "O" OPEN DOOR command is issued online. The format for the file is, [ACCESS LEVEL] [DESCRIPTION] [DOOR NUMBER] For complete information on the format of the file, see the IDCCOM.DOR file on the disk. For full ================================================= Page 31 ================================================= information about the DOORS system, see the DOOR SYSTEM FOR HOST MODE section. USING THE REDIRECT.SYS driver The REDIRECT driver is a serial port driver that can be used in host mode so that whenever a caller is shelled to dos, running ZIPVIEW or some other external program, the SYSOP will be able to visually monitor the callers activities. Normally, when the caller executes an external program, the SYSOP is virtually cutoff from what is happening on his system, since the external program controls all input and output and since all I/O has been redirected by the invoking batch file via a CTTY COMx command, the I/O events are not displayed on the local screen, only on the callers screen. REDIRECT.SYS sets up a logical device named IDCDOS. IDCDOS intercepts all I/O and makes sure that all modem activity is echoed to the local screen. Note that the SYSOP can use the F1 key to terminate a call at any time when the REDIRECT driver is active. SEE THE REDIRECT.DOC FILE FOR COMPLETE INSTRUCTIONS SCREEN BLANKER When host mode is initiated, the screen blanker is automatically hooked into the timer tick interrupt. After 5 minutes of inactivity, that is, no local keyboard activity and no calls received, the screen will blank. If the space bar is pressed, the screen is restored and the screen blanker is reset. DOOR SYSTEM FOR HOST MODE The door system allows the sysop to offer external programs for the callers to run. The doors are configured with the IDCCOM.DOR file. See that file for complete instructions on the format of the file. IDCCOM supports up to 10 doors (0-9) and each door may be assigned a minimum access level, just as with the file directories. ================================================= Page 32 ================================================= WATCHDOG TIMER - Whenever a door is opened, ZIPVIEW is run or a shell to dos is performed in host mode by a REMOTE caller (not the SYSOP), a watchdog timer is invoked that monitors the callers time on the system and the carrier detect signal. The watchdog timer is activated when, 1. host mode is not in local test mode 2. a DOOR is opened 3. caller shells to DOS 4. ZIPVIEW The watchdog timer reboots the computer IFF 1. host mode is NOT in local test mode 2. the CARRIER signal is lost 3. the callers time limit expires In order to take full advantage of the watchdog system, the AUTOEXEC.BAT file should be set up to load and execute IDCCOM in host mode automatically, using a script file. MESSAGE SYSTEM IDCCOM stores all messages in the IDCCOM.MSG file and uses the IDCCOM.HDR file as an index into the message database, unlike some other software that uses separate files for each message. The database approach is much more compact and less wasteful of your valuable disk resources, since even a 1 byte file takes up at least 1k and as much as 16k of disk space, depending on cluster size on your disks. When DOS stores a file on your disk, it allocates a minimum of 1 cluster to the file. The IDC program DISK.EXE (IDCUTILS package) can be used to see what your cluster size is. In the message section, the user may read messages, answer messages, check for mail, scan the messages, reply to a message or go directly to a message by entering the message number. ================================================= Page 33 ================================================= IDCCOM will remember the last message read and automatically start reading messages there the next time the caller logs in. HOST MODE LOG FILE Each time a call is received, a entry is made in the IDCCOM.LOG file, giving the callers name, password (attempts), time, date and files uploaded/downloaded and how he logged off. Entries are also made in the log file that describe any serious disk errors that occurred during upload or download. This same message is displayed for the caller when it occurs, but the log entry is made anyway so that the SYSOP can see visually exactly what was transpiring when the error occurred. SYSOP FUNCTIONS NOTE: SYSOP function keys are only available at the MAIN MENU prompt, except CTRL-X, which is always available. The CTRL-H key combination displays all of the SYSOP control functions available when a caller is online. Note that the SYSOP functions only work on the local terminal and are not available to call ers. The registered version of IDCCOM comes with IDCSYS.EXE which is a program that allows the SYSOP to validate, ban, delete, set call and time limits or update callers records. The shareware version of the program only allows validation while the caller is online. The online SYSOP functions are; CTRL-H - display list of available SYSOP commands CTRL-X - terminate caller immediately and hangup CTRL-V - validate current caller CTRL-S - display caller statistics CTRL-R - reset callers time to 0 CTRL-L - toggle printer echo ON/OFF CTRL-P - SYSOP initiated chat mode CTRL-Z - end chat Note that none of the output from the SYSOP functions is echoed to the modem, so that these functions are invisible to the caller, with the ================================================= Page 34 ================================================= exception of the validation function, which informs the caller of his new status. IDCSYS - SYSOP PROGRAM (NOT INCLUDED IN SHAREWARE VERSION) The sysop control program allows the sysop to monitor and change user statistics for the HOST mode. Users may be added, updated, edited, deleted, validated and globally validated from the NEWUSERS.BBS file automatically. The IDCSYS program allows automatic validation of all callers who have filled out the validation questionnaire. Users access levels, calls per day, daily time limit, password, name, address, city, state, zip, phone, banned and deleted status may all be edited with the IDCSYS program. Message base maintenance functions are also provided, such as viewing, deleting and packing messages from the message database. TRANSFER PROTOCOLS IDCCOM supports all of the current major protocols, including true YMODEM. The transfer protocols that have been implemented in some cases by some of the current telecommunications software, unfortunately, do not adhere to the standards set forth by the protocol authors. This creates many problems in the BBS community, simply because some software authors do not bother to do their homework, because, it certainly is not due to a lack of documentation. There are those programs that call XMODEM 1K, YMODEM, which is certainly incorrect. IDCCOM does not perpetuate these myths and uses the correct naming conventions. There are some implementations of XMODEM that do not know how to differentiate between XMODEM CHECKSUM and XMODEM CRC and some YMODEMS that do not fall back to 128 block size, giving a greatly bloated filesize after the transfer. These same implementations of YMODEM also do not include the filesize in the header, also giving erroneous filesizes. IDCCOM adheres very rigidly to the specifications laid down by the protocol authors, Ward Christensen ================================================= Page 35 ================================================= and Chuck Forsberg. No other authors names are listed, because most of the newer protocols are merely derivatives of the originals and the differences are so slight, that the number of protocols we have today has become ridiculous. IDC's transfer algorithms are robust and exhibit very fast error recovery and response times. To reiterate the major guidelines for YMODEM, the following is an excerpt from YMODEM.DOC by Chuck Forsberg. "YMODEM Refers to the XMODEM/CRC (optional 1k blocks) protocol with batch transmission as described below. In a nutshell, YMODEM means BATCH. YMODEM MINIMUM REQUIREMENTS All programs claiming to support YMODEM must meet the following MINIMUM requirements: + The sending program shall send the pathname (file name) in block 0. + The pathname shall be a null terminated ASCII string as described below. + The receiving program shall use this pathname for the received file name, unless explicitly overridden. + The sending program shall use CRC-16 in response to a "C" pathname nak, otherwise use 8 bit checksum. + The receiving program must accept any mixture of 128 and 1024 byte blocks within each file it receives. Sending programs may switch between 1024 and 128 byte blocks at the end of file(s), and when the frequency of retransmissions so suggests. + The sending program must not change the length of an unacknowledged block. + At the end of each file, the sending program shall send EOT up to ten times until it receives an ACK character. (This is part of the XMODEM spec.) + The end of a transfer session shall be signified by a null (empty) pathname. ================================================= Page 36 ================================================= Programs not meeting all of these requirements are not YMODEM compatible, and shall not be described as supporting YMODEM. Meeting these MINIMUM requirements does not guarantee reliable file transfers under stress. Particular attention is called to XMODEM's single character supervisory messages that are easily corrupted by transmission errors." XMODEM CHECKSUM, CRC and 1K XMODEM CHECKSUM, the first modem transfer protocol, uses 128 byte packets, a three byte header and a single byte checksum after the data packet. The header begins with an SOH character, followed by the packet number and compliment. After each packet is sent, the sender waits for an ACK or NAK from the receiver and will either resend the packet (if NAKed) or send the next packet. The protocol is determined by the receiver. If the receiver sends an initial NAK (transmitter should check for several for robustness), then XMODEM CHECKSUM should be engaged by the transmitter. If the receiver sends an initial "C" then the transmitter should engage CRC error checking and send a two byte CRC, instead of the single byte checksum after the data packet. If the receiver opens with "CK", then the transmitter should engage CRC and 1k packets and use the STX character to signal the start of packet instead of the SOH character. IDCCOM follows very strictly the protocol specification laid down in YMODEM.DOC, which is a conglomeration of information from the protocol authors. YMODEM and YMODEM-G This protocol is very similar to XMODEM 1K and often confused with it. The packet size is 1K (like XMODEM 1K), but has a first packet size of 128 bytes for the header packet. The header contains the file name, file size, file date/time, mode and serial number. All error checking is done via CRC16 and if too many errors occur, the protocol will drop back to 128 byte packets. The protocol is inherently a batch protocol with the end of batch being signaled by a 128 byte packet with NUL data. ================================================= Page 37 ================================================= After each packet is sent, the transmitter clears the line and waits for an ACK or NAK. YMODEM-G is essentially the same as YMODEM, except that the whole file is sent before the transmitter looks for any status information from the receiver and no filename header packet is sent. No resending of packets is done, therefore this protocol is very prone to errors and should only be used on MNP or other error correcting modems (which it was designed for). YMODEM-G BATCH is also the same, except the opening filename packet is sent just as in the normal YMODEM. The YMODEM-G protocols require hardware handshaking, e.g. that CTS/RTS be active. ASCII This is not really a protocol at all, but merely a way of sending ASCII data. XON/XOFF handshaking is used and files may be transferred in a batch mode. Note that IDCCOM incorporates ASCII batch transfers via multiple wildcard filenames on the command line or via the picklist. MEGALINK This protocol was developed by Paul Meiners of GT fame. MEGALINK is network friendly and all necessary characters are "folded" so as not to interfere with telenetworks. The protocol resembles YMODEM BATCH to a great extent with a few significant improvements. An opening header is sent that includes the filename, filesize, filedate, CRC version and sending programs name. The packet size is 512 bytes. MEGALINK is also a batch oriented protocol. Ini tially, the protocol sends a single packet and requests status from the receiver. If enough packets are sent without error, then the protocol enables a STREAM mode, where several packets are sent before the transmitter requests status. This is a very nice protocol with, however, two shortcomings. First, if the receiver detects that a file already exists, it does not notify the transmitter, it simply aborts and waits for the transmitter to time-out (very kludgey) and second, the CRC-32 is mathematically inaccurate. Preconditioning is incorrect and postconditioning is not done at all. ================================================= Page 38 ================================================= ZMODEM The ZMODEM protocol was developed for the public domain by Chuck Forsberg of Omen Technology under a contract with TELENET. ZMODEM is a batch oriented transfer protocol that supports a conversational mode between the transmitter and receiver and allows for differences in implementations to be negotiated. All data is checked via CRC computations and network support is provided throughout. A ZMODEM session is initiated by the transmitter, which differs from most protocols where the session is initiated by the receiver. Feature negotiation is handled by exchanging FRAMES of varying types, whereby the transmitter and receiver can inform each other of their needs and capabilities, such as control character escaping, buffer sizes, CRC32 capabilities and more. A simple transfer session is depicted below, TRANSMITTER RECEIVER "rz",CR ZRQINIT ZRINIT ZFILE ZRPOS ZDATA ZEOF ZRINIT ZFIN ZFIN OO The transmitter sends the ASCII string, "rz" and a carriage return, followed by the ZRQINIT frame to get the receiver started. The receiver responds with a ZRINIT frame that describes its capabilities. The transmitter then sends a ZFILE frame with the filename, size, date, mode, serial number, files remaining and number of bytes remaining to be sent. The receiver will then respond with a ZRPOS frame, which tells the transmitter where to start in the file, usually at the first byte, but the receiver may specify any location within the file. This sequence provides a mechanism whereby ZMODEM can pickup where it left off in an aborted file ================================================= Page 39 ================================================= transfer. The transmitter will then send the data and a ZEOF frame. The receiver will then respond with an error or a ZRINIT frame. Once the file has been transferred successfully, the transmitter sends a ZFIN frame and expects a ZFIN frame back from the receiver. If this is the last file being sent, the transmitter sends the "OO" characters for "Over and Out". This is a very simple example of a ZMODEM transfer and there are other events that may complicate matters greatly, for example, the receiver may send a ZCHALLENGE frame that contains a random number, expecting the transmitter to echo this number in a ZACK frame. This mechanism allows the receiver to be assured that there is a valid transmitting program on the other end. ZMODEM also allows for ZCOMMAND and ZCOMPL frames that permit the transmitter to issue instructions to the receiver. For a complete discussion of the ZMODEM protocol, see the ZMODEM.DOC file that comes with DSZ.EXE. CRC/CHECKSUM ERROR CHECKING Anyone who has done any file transfers via modem has undoubtedly seen line noise and transfer errors. This is reasonable, since phone lines run all over, are located outside and are thus susceptible to lightning strikes, power glitches, channel interference, signal fading, atmospheric conditions and other phenomenon that add a degree of nervousness to file transfers. For these reasons, it is essential that transfer protocols concern themselves with transmission errors. The first popular transfer protocol was XMODEM and made use of CHECKSUM error checking. With checksum, the transmitter merely adds all of the bytes in the packet (ignoring overflow) and sends this sum to the receiver as the checksum byte. The receiver then adds all of the bytes in the received packet (again ignoring overflow) and tests to make sure this sum matches that sent by ================================================= Page 40 ================================================= the transmitter. If they do not match, the receiver NAK's the packet and the transmitter resends the packet. Since checksum is merely the addition of all the bytes in the packet, it is easy to see how errors could still slip by. For example, the numbers 2,4,6 add up to 12, however, so do, 8,1,3 as do other combinations. For a packet size of 128 bytes, there are many combinations that will yield the same checksum, only one of which will be correct, but the receiver will take any of the combinations as correct. It is apparent, then that a great number of errors go undetected with checksum error checking and a better method was needed. The CRC algorithms were a natural here. CRC or cyclic redundancy check will catch the following errors, * all one or two bit errors * all odd numbers of bit errors * all burst errors less than or equal to the degree of the polynomial used * most burst errors greater than the degree of the polynomial used In a system using CRC, the message sent is considered to be a binary polynomial M(X). In XMODEM this is a 1024 bit polynomial, where each bit is viewed as a coefficient. The message polynomial M(X) is multiplied by X^k and then divided by an arbitrary generator polynomial G(X) of degree k, which results in a quotient Q(X) and a remainder R(X)/G(X). X^k * M(X) R(X) ---------- = Q(X) + ------ G(X) G(X) rearranging modulo-2 and recognizing that addition and subtraction are equivalent operations in binary, we find, X^k * M(X) + R(X) = Q(X) * G(X) The transmitter appends the CRC to the message, M(X) + R(X) and the receiver multiplies this by X^k and because of the above equation, this result is evenly divisible by the generator polynomial. If the division results in a zero answer, then it is assumed no errors have occurred, however, a non- zero answer indicates an error has occurred. ================================================= Page 41 ================================================= The CRC-16 algorithm used in XMODEM CRC treats the entire data packet as an integer, 128 bytes times 8 bits = 1024 bits. This 1024 bit integer is then multiplied by X^k or 2^16 (65536) and divided by the CRC polynomial, which is X^16 + X^12 + X^5 + 1 or 65536 + 4096 + 32 + 1 = 69665 for the CRC-16 used in xmodem. This is the SDLC(IBM,CCIT) polynomial. HALF/FULL DUPLEX There has been much confusion on the matter of half and full duplex in telecommunications. Perhaps an example will help clear this up. There are really three categories for data communications, SIMPLEX, HALF-DUPLEX and FULL- DUPLEX. SIMPLEX Like your local radio station, you can listen, but you cannot talk HALF-DUPLEX Like two walkie-talkies, only one person may speak at a time FULL-DUPLEX Like a telephone, both parties may speak at the same time In modeming, FULL DUPLEX mode means that the local terminal sends all characters to the modem and depends on the modem or the remote computer to ECHO the characters back so they will be displayed locally. In HALF DUPLEX mode, the local terminal does not expect an echo from the remote system, therefore the local terminal must display the characters itself. HARDWARE AND SOFTWARE HANDSHAKING RTS/CTS XON/XOFF When performing communications via modem, some way must be provided for the modems and computers to tell each other when they are busy and when they are free to send or receive data. This is what is known as "handshaking". If the computer wants to send data to the modem but the modem is not ready ================================================= Page 42 ================================================= because it is busy doing something else, like sending the last character, the computer must make sure that the modem is ready to accept the next character of data, or data will be lost. The computer does this by checking the signal on one of the wires going between the modem and computer. When the signal is "HIGH", then the modem is telling the computer that it is CLEAR TO SEND DATA, or CTS for short. The computer can also tell the modem that is would like to send data to it by making the REQUEST TO SEND (or RTS) line "HIGH". With this mechanism, we have a method by which the computer equipment (DTE) and the modem equipment (DCE) can exchange data. This method is called HARDWARE HANDSHAKING (RTS/CTS), that is physical wires and chips are used to control the passing of data. Another method of accomplishing the same thing is called SOFTWARE HANDSHAKING. In this case, no wires or chips are involved all handshaking signals are handled by the software. This is usually the case in BBS work, however, with the faster modems becoming more readily available, we are seeing more and more need for the hardware handshaking method. With the 9600 bps V.42, X.25 and MNP modems, where computer to modem speed (DTE to DCE speed) can be 19200 bps, it is essential that the hardware RTS/CTS methods of flow control be implemented. In these cases, the computer is speaking to the modem at 19200 bps and the modem is compressing the data and speaking to the other modem across the phone line at 9600 bps, but throughput tends to look more like the phone line connection was actually made at 19200 bps. RTS/CTS flow control must also be implemented when using any of the non-error checking transfer protocols such as YMODEM-G. In order to make use of the RTS/CTS handshaking, your modem must be capable of using the signals, your computer must be capable of using the signals and the computer to modem cable must have all of the wires needed (very many cables do not!). In IDCCOM, the XON/XOFF and RTS/CTS handshaking protocols are implemented and can be either turned on or off from the parameters menu. ================================================= Page 43 ================================================= COMPUTER TO MODEM SIGNALS There are many wires that connect the modem to the computer and each of them has a distinct name or mnemonic assigned by the IEEE standard RS-232C interface specification. Following is a brief explanation of these signals to help you better understand the complex events in telecommunications. TXD - transmit data line This wire is the one where data is transmitted from the computer to the modem RXD - receive data line This wire is the one where data is received by the computer from the modem RTS - request to send This wire is used by the computer to signal the modem that it wants to send data CTS - clear to send This wire is used by the modem to signal the computer that it is not busy and the computer may send its data DSR - data set ready This wire is used by the modem to signal the computer that the modem is ready to operate. Note that some cables and/or some ports do not support this pin DCD - data carrier detect This wire is the signal from the modem to the computer that tells the computer whether or not a carrier signal is present on the phone line DTR - data terminal ready This wire is a signal from the computer to the modem and the modem can be configured to respond by hanging up the phone ================================================= Page 44 ================================================= RI - ring indicator This wire is a signal from the modem to the computer saying that a ring has been detected on the phone line COMCFG - CONFIGURATION PROGRAM (NOT INCLUDED IN SHAREWARE VERSION) The COMCFG program allows changing colors, mouse sensitivity, video write method and sound ON/OFF. In order to run COMCFG, it must be in the same directory as IDCCOM.EXE and the two programs must have the same version numbers. ================================================= Page 45 ================================================= APPENDIX 1 - modem init strings Blank spaces may be included in any of the modem strings as they will be ignored by the modem, however you must be careful not to overflow the modem's buffer, otherwise the command may be ignored by the modem. Note that some modems (HAYES, for example) require that case may not be mixed in commands, e.g. "aT" is not acceptable, it must be "AT" or "at". Suggested INIT strings for the following modems 1. ZOOM MX2400 bps modems 2. PRACTICAL PERIPHERALS PM2400 ============================================================== AT&D2 S11=55 S10=6 S9=1 E1 NOTE: you may use up to 40 characters on the ZOOM modems. AT - gets attention of modem &D2 - follow DTR signal (for hangup) S11=55 - sets speed of touchtone dialing (in msec.) S10=6 - carrier loss to hangup delay (how fast modem hangs up once it has lost carrier S9=1 - how fast the modem will detect carrier E1 - enable character echo in command mode HAYES 9600 bps including V.42 and X.25 products =============================================================== NOTE: you may use up to 255 characters on the HAYES 9600 bps modems AT&C1&D2 S11=55 S10=6 S9=1 W1E1 AT - gets attention of modem &C1 - monitor CARRIER DETECT &D2 - hang up when DTR drops S11=55 - sets speed of touchtone dialing (in msec.) S10=6 - carrier loss to hangup delay S9=1 - how fast the modem will detect carrier W1 - shows DTE/DCE speed negotiation progress messages E1 - enable character echo in command mode ================================================= Page 46 ================================================= ANCHOR VOLKSMODEM 1200 =============================================================== ATZV0Q0E0S0=0 AT - gets attention of modem Z - reset modem (very helpful on this modem) V1 - send result codes as text strings Q0 - send result codes E1 - command echo on S0=0 - disable automatic answer function EVEREX EV-920 1200 =============================================================== ATX2 S11=55 S10=6 S9=1 NOTE: you may use up to 40 characters on the ZOOM modems. AT - gets attention of modem X2 - turn on ALL result codes S11=55 - sets speed of touchtone dialing (in msec.) S10=6 - carrier loss to hangup delay (how fast modem hangs up once it has lost carrier S9=1 - how fast the modem will detect carrier ================================================= Page 47 ================================================= APPENDIX 2 - modem result codes The following result codes fit the following modems; 1. ZOOM MX2400 2. PRACTICAL PERIPHERALS PM2400 numeric verbose 0 OK 1 CONNECT 2 RING 3 NO CARRIER 4 ERROR 5 CONNECT 1200 6 NO DIALTONE 7 BUSY 8 NO ANSWER 10 CONNECT 2400 HAYES 9600 result codes numeric verbose 0 OK 1 CONNECT 2 RING 3 NO CARRIER 4 ERROR 5 CONNECT 1200 6 NO DIALTONE 7 BUSY 8 NO ANSWER 10 CONNECT 2400 11 CONNECT 4800 12 CONNECT 9600 14 CONNECT 19200 40 CARRIER 300 46 CARRIER 1200 47 CARRIER 2400 48 CARRIER 4800 50 CARRIER 9600 70 PROTOCOL:NONE 71 PROTOCOL:ERROR-CONTROL/LAP-B 72 PROTOCOL:ERROR-CONTROL/LAP-B/HDX 73 PROTOCOL:ERROR-CONTROL/AFT ================================================= Page 48 ================================================= ANCHOR VOLKSMODEM 1200 result codes numeric verbose 0 OK 1 CONNECT 2 RING 3 BUSY 3 NO CARRIER 4 ERROR 5 CONNECT 1200 EVEREX EV-920 - 1200 bps result codes (must use X2 command for full result codes) numeric verbose 0 OK 1 CONNECT 2 RING 3 NO CARRIER 4 ERROR 5 CONNECT 1200 6 NO TONE 7 BUSY 9 PHONE OFF-HOOK ================================================= Page 49 ================================================= APPENDIX 3 - ANSI sequences supported ESC [ n A - cursor up n lines ESC [ n B - cursor down n lines ESC [ n C - cursor right n columns ESC [ n D - cursor left n columns ESC [ row;col f - cursor position ESC [ f - home cursor ESC [ row;col H - cursor position ESC [ H - home cursor ESC [ J - erase from cursor to end of screen ESC [ 1 J - erase from beginning of screen to cursor ESC [ 2 J - erase screen, home cursor ESC [ K - erase from cursor to end of line ESC [ 1 K - erase from beginning of line to cursor ESC [ 2 K - erase line ESC [ m - turn off all attributes ESC [ atr;atr m - set color attributes ESC [ s - save cursor position ESC [ u - restore cursor position ================================================= Page 50 ================================================= APPENDIX 4 - COM ports and interrupt lines (IRQ) IDCCOM uses the "standard" port settings depicted in the following table. Note that the port numbers are given in hexadecimal (as they are listed in the manuals). Port I/O PORT ADDRESS STANDARD IRQ NUMBER ------ ---------------- ------------------- 1 3F8-3FF IRQ4 2 2F8-2FF IRQ3 3 3E8-3EF IRQ4 4 2E8-2EF IRQ3 Alternate port numbers for some serial cards; x 2E0-2E7 The PS/2 class machines provide COM 3 and COM 4 support at the following port numbers; 3 3220 IRQ3 4 3228 IRQ3 When installing serial cards in your machine, you must ensure that no two ports have the same number. Serial ports are used by MIDI interface cards, internal modem cards, mouse cards, serial printers and external modems. ================================================= Page 51 ================================================= APPENDIX 5 - script file language The script file itself may be made up of any of the following commands. Blank lines are ignored. Tabs and spaces may be used throughout for spacing purposes. ; - a comment line * - a comment line ' - a comment line :label - define labels (just like .BAT files) ALARM - sounds klaxxon alarm and waits for a keypress BEEP - make a beep CAPTURE ON/OFF - toggle capture mode ON/OFF CAPFILE <filename> - specify filename for capture file CD <directory> - change disk directories CLEAR - clear the screen CYCLE - repeat execution of the current script file DIAL <555-1212> - dial a specified phone number PHONEDIR <###> - dial "number" entry in the phone directory ECHO ON/OFF - turns echo of all script commands to local screen on or off. (used primarily for debugging scripts) Note that using this command without any arguments, e.g. ECHO toggles the echo flag EXIT - hangup and exit IDCCOM FLUSH - flush any serial chars in buffer FORMFEED - send a formfeed to the printer KBFLUSH - flush local keyboard MACRO n - send a macro key n, where 1 ¢≤ n ≤ 10 MACRO 1 - sends macro key 1 MACRO F10 - sends macro key 10 MACRO 1O - sends macro key 10 GOTO label - goto the label HANGUP - hangup the modem HOST - enter host mode IFCD goto label - if carrier is detected, ================================================= Page 52 ================================================= then goto label IFNOTCD goto label - if carrier is not detect ed, then goto label PRINT ON/OFF - turns printer echo ON and OFF PAUSE nnn - wait for a "n" seconds and proceed. Maximum pause is 255 seconds. Anything larger will be converted modulo 256 QUIT - exit from script RECV <protocol file(s) - send file(s) (see XMIT below) NOTE: for SEND and SENDLN you may also give "$PW" as an argument and the password from the current directory entry will be sent. Note that you must have used the PHONEDIR command prior to this so that the password will be set up. SEND "text" - send "text" to modem and local SENDLN "text" - send "text" to modem and add carriage return and local echo SENDCTRL char - send a control character to modem SET <baud n81 port n> - set modem parameters WAITFOR "text" - wait for "text" to be received from modem WAITTIME nn - set max time for WAITFOR routine (59 seconds max) WRITE "text" - send "text" to local screen only WRITELN "text" - send "text" to local screen only w/cr,lf XMIT <protocol file(s)> - send "files" via protocol. Use mnemonics for protocols, e.g. YB XM, same as IDCCOM NOTE: all <text> is to be enclosed in " or ' characters label names are limited to 10 characters. If names longer than 10 characters are used, only the first 10 will be read. ================================================= Page 53 ================================================= SENDING AND RECEIVING FILES IN SCRIPT FILES Mnemonics to be used with the XMIT and RECV functions are as follows. The command line syntax is XMIT -xx fubar.txt fubar.doc Where xx is one of the following; "XC" ; xmodem CRC "XM" ; xmodem checksum "XK" ; xmodem 1K "YB" ; ymodem "YG" ; ymodem-G "GB" ; ymodem-G batch "ML" ; megalink "ZM" ; zmodem "AS" ; Ascii "E1" ; external 1 "E2" ; external 2 ================================================= Page 54 ================================================= APPENDIX 6 - acknowledgements The following are excellent references for the specifications for the file transfer protocols. We have found them to be accurate sources for the specifications, rules and operating considerations of the transfer protocols. YMODEM.DOC - Chuck Forsberg, incl. excerpts from Ward C. MEGALINK.DOC - Paul Meiners ZMODEM.DOC - Chuck Forsberg Many thanks to Keith Petersen for his kind assistance and suggestions and for running Royal Oaks for mega- years. Many thanks to Ward Christensen for being so generous, ingenious and timely (although cryptic). Many thanks to Charles Taylor, for his undying affluence in locating bugs and incinerating bad ideas. Many thanks to Curt Edwards, as always, an endless source of good ideas and working insight. ================================================= Page 55 ================================================= INDEX ACK, 36, 37, 38 Acknowledgements, 5, 55 Allocates, 33 ALR, 4 ANCHOR, 5, 47, 49 ANSI, 3, 5, 6, 14, 18, 21, 22, 23, 24, 25, 50 AOPA, 2 Appended, 14 Archive, 3 ASCII, 5, 6, 23, 36, 38, 39, 54 Assembler, 4, 5 ATX, 47 AUTOEXEC, 25, 30, 31, 33 AUTOLOGOFF, 24 Automation, 31 Auto-linefeed, 18 BAUD, 4, 7, 53 BAUDOT, 7 Board, 31 Boot, 25, 30 Boots, 31 BPS, 4, 5, 6, 7, 10, 15, 17, 43, 46, 49 BREAK, 31 BUFFERS, 31 Building, 22 Bulletin, 21, 22, 23, 24, 25, 27 Bulletins, 6, 23, 24 BULLETxx, 21, 23, 25 CAPFILE, 52 CAPTURE, 4, 6, 14, 18, 21, 52 Captured, 14 Capturing, 14 CCIT, 42 CD, 8, 27, 30, 31, 52 CFG, 22 CGA, 5 CHECKSUM, 5, 35, 36, 37, 40, 41, 54 Chips, 43 CHKDSK, 31 Christensen, 35, 55 CLS, 31 Color, 6, 50 Colors, 29, 45 COM, 5, 6, 7, 22, 25, 31, 51 COMCFG, 3, 5, 2, 45 COMPORT, 17 COMREST, 3, 22 COMSAVE, 3, 22 COMx, 32 ================================================= Page 56 ================================================= CONFIG, 24, 30, 31 Confusion, 42 CONNECTING, 4, 15, 21, 24 Connections, 24 Consisting, 31 CONTROL-C, 22 CONTROL-E, 23 CONTROL-K, 22 CONTROL-T, 22 CONTROL-Y, 9 Conway, 1, 4 Copyright, 1, 2, 4 CRC, 5, 35, 36, 37, 38, 39, 40, 41, 42, 54 CTRL-H, 34 CTRL-L, 34 CTRL-P, 34 CTRL-R, 34 CTRL-S, 34 CTRL-V, 34 CTRL-X, 34 CTRL-Z, 34 CTS, 5, 15, 38, 42, 43, 44 CTTY, 32 DCD, 44 DCE, 4, 7, 43, 46 Denied, 23 DIAL, 11, 15, 52 DIALER, 10, 16 DIALING, 4, 6, 10, 11, 13, 15, 16, 18, 46, 47 DIALTONE, 48 DIRECT, 4, 15, 21 Disconnect, 11 Dispose, 14 Dnload, 18 DOOR, 5, 21, 22, 26, 27, 31, 32, 33 Doors, 22, 26, 32 DOR, 5, 22, 26, 31, 32 DOS, 18, 22, 25, 26, 27, 30, 32, 33 DOSSHELL, 22 Download, 17, 20, 25, 26, 30, 34 Downloaded, 6, 17, 34 DOWNLOADING, 16, 17 Downloads, 6, 27 Downs, 14 DR, 27 Drop, 11, 37 DSR, 44 DSZ, 17, 40 DTE, 4, 7, 43, 46 DTR, 11, 15, 44, 46 DUPLEX, 5, 15, 42 ================================================= Page 57 ================================================= EDIT, 4, 15, 18, 19 Edwards, 55 EGA, 4, 5, 6, 20 EOT, 36 ERROR-CONTROL, 48 ESC, 16, 19, 50 ESCAPE, 9, 10, 14, 19, 20 EV, 5, 47, 49 EVEREX, 5, 47, 49 Executing, 22 EXTERN, 17 FAST-TELECOMMUNICATIONS, 1 FDR, 4, 22, 23, 26, 28, 29, 30 FILTANSI, 3, 22 FIRSTCAL, 21, 23 Flow, 43 Folded, 38 Fooled, 15 FORCE, 21 FORCED, 15, 31 Fraction, 5 Fragmentation, 31 FULL-DUPLEX, 42 GOTO, 17, 52, 53 HALF, 5, 15, 42 HALF-DUPLEX, 42 Handling, 3 HANGUP, 11, 15, 26, 34, 46, 47, 52 HDR, 22, 33 HDX, 48 Help, 3, 4, 6, 9, 16, 21, 22, 23, 24, 29, 42, 44 HERCULES, 5 Hierarchical, 28 HLP, 21, 22, 23, 25, 29 HOST, 4, 5, 6, 11, 12, 15, 19, 21, 22, 23, 24, 25, 26, 27, 29, 30, 31, 32, 33, 34, 35, 52 H-Z, 28 IDCDOORx, 22, 26 IDCDOS, 32 IDCSHELL, 4, 6, 12, 13, 18, 20, 22 IDCSYS, 3, 5, 2, 24, 34, 35 IDCUTILS, 31, 33 IEEE, 2, 44 IFCD, 52 IFF, 33 IFNOTCD, 53 JJ, 18 ================================================= Page 58 ================================================= Kaypro, 4 Kentucky, 1, 2, 3, 4 KSPE, 2 LICENSE, 4, 2, 3 LICENSING, 4, 3 LOGOFF, 21, 23, 29 LOGONSCR, 21, 22, 29 MAC, 12, 21 MACRO, 4, 12, 13, 18, 52 Macros, 13, 21 MAINMENU, 21, 22, 29 Maintenance, 35 MASM, 4 MCGA, 5 MD, 8 MDM, 12, 21 Mega, 55 MEGALINK, 5, 6, 17, 38, 54, 55 Meiners, 38, 55 Merrick, 1, 4 MGA, 5 MIDI, 51 Midnight, 22, 25, 31 ML, 54 MNP, 24, 38, 43 MNU, 21, 23, 25, 26 Modeming, 42 Modem's, 46 NARC, 4, 6, 13, 18, 20, 22 Network, 2, 38, 39 NEWUSERS, 22, 24, 35 Non-ANSI, 3, 23 NON-MNP, 24 NORTH, 3 Norton, 4 NSPE, 2 NUL, 37 NULL, 21, 36 NULL-MODEM, 15 NUMERIC, 10, 15, 48, 49 Oaks, 55 OFF-HOOK, 49 ON-LINE, 9 Option, 14, 31 Overcome, 25 Packet, 37, 38, 40, 41, 42 Packets, 37, 38 Packing, 35 ================================================= Page 59 ================================================= PARAMETERS, 4, 15, 17, 30, 43, 53 Parity, 10 Password, 10, 13, 18, 23, 34, 35, 53 PATH, 12, 15, 16, 17, 18, 19, 20, 28 PAUSE, 14, 24, 53 PCjr, 22 Petersen, 55 PgDn, 15, 16, 17, 19 PgUP, 15, 16, 17, 19 PHONEDIR, 52, 53 Picklist, 4, 6, 15, 16, 17, 19, 21, 38 PRICING, 4, 3 Protocol, 10, 16, 17, 21, 22, 24, 29, 35, 36, 37, 38, 39, 40, 48, 53 PROTOCOLS, 5, 6, 16, 17, 21, 29, 35, 36, 38, 39, 40, 43, 53, 55 PTH, 11, 12, 21 QuickBASIC, 4 QuickC, 4 QUIT, 53 Radio, 42 Ram, 5 Reboot, 31 Reboots, 33 RECEIVE, 12, 17, 42, 44 REM, 17, 31 RES, 12, 21 RESET, 11, 24, 32, 34, 47 ROLLDATE, 22, 25, 31 Rollover, 31 RTS, 5, 15, 38, 42, 43, 44 SAMPLE, 31 SDLC, 42 SENDCTRL, 53 SENDLN, 53 Serial, 6, 18, 21, 22, 32, 37, 39, 51, 52 SETUP, 4, 7, 8, 23, 29 Shell, 18, 22, 26, 27, 31, 33 Short-cut, 15 SIGNALS, 5, 7, 43, 44 SIMPLEX, 42 SOH, 37 STX, 37 Tagging, 16 TELENET, 39 Telephone, 42 TERMINAL, 4, 7, 9, 10, 12, 16, 21, 34, 42, 44 TRANSMIT, 12, 16, 26, 44 TSR, 22, 25 ================================================= Page 60 ================================================= TXD, 44 UNIQUE, 23 UNIX, 4 Upload, 16, 17, 18, 21, 25, 26, 30, 34 Uploaded, 6, 34 UPLOADING, 4, 16 Uploads, 6, 27 VERBOSE, 10, 15, 48, 49 VGA, 4, 5, 6, 20 Video, 5, 20, 45 VOLKSMODEM, 5, 47, 49 Wait, 24, 31, 53 WAITFOR, 53 WAITTIME, 53 Walkie-talkies, 42 WARNING, 24 Warranties, 1 WARRANTY, 4, 1 WATCHDOG, 33 WINGS, 2 WRITELN, 53 XMODEM, 5, 6, 35, 36, 37, 40, 41, 42, 54 XMODEM's, 37 XOFF, 5, 15, 38, 42, 43 XON, 5, 15, 38, 42, 43 YESNO, 31 YMODEM, 5, 6, 17, 35, 36, 37, 38, 54, 55 YMODEMS, 35 YMODEM-G, 5, 6, 37, 38, 43, 54 ZACK, 40 ZCHALLENGE, 40 ZCOMMAND, 40 ZCOMPL, 40 ZDATA, 39 ZEOF, 39, 40 ZFILE, 39 ZFIN, 39, 40 Zip, 6, 20, 22, 24, 26, 35 ZIPVIEW, 6, 13, 18, 22, 25, 27, 32, 33 ZMODEM, 5, 6, 17, 39, 40, 54, 55 ZOOM, 5, 46, 47, 48 ZRINIT, 39, 40 ZRPOS, 39 ZRQINIT, 39 ZVIEW, 22 ================================================= Page 61