home *** CD-ROM | disk | FTP | other *** search
- ; ----------------------------------------------------------------------------
- ; BINKLEY.CFG - Configuration File for BinkleyTerm 2.50
- ; ----------------------------------------------------------------------------
- ;
- ; ----------------------------------------------------------------------------
- ; All configuration options are explained in detail in the Reference
- ; Guide section, "Configuration File."
- ; ----------------------------------------------------------------------------
- ;
- ; ----------------------------------------------------------------------------
- ; The following may apply to all BinkleyTerm installations:
- ; ----------------------------------------------------------------------------
- ;
- ; Port The desired FOSSIL port to use, normally 1=COM1: and 2=COM2:
- ; Baud Maximum baud rate (300,1200,2400,4800,9600,19200,38400)
- ; Carrier Your carrier mask in hex (usually 80)
- ; Init Initialization string for your modem
- ; TermInit Initialization for terminal mode only operation
- ; Prefix Your modem's dial prefix (ATDT or ATDP)
- ; Suffix Your modem's dial suffix (if you need one, normally not)
- ; Busy What BinkleyTerm sends to the modem while doing other things
- ; Answer Use when modem isn't set to auto-answer, string to send to answer
- ; PreDial Modem string sent before dial string (Prefix) to override default
- ; PreInit Modem string sent before init string (Init) to override default
- ; ModemTrans Dynamic selection of modem prefix and suffix based on nodelist
- ; DTRHigh Leaves DTR (data terminal ready) line "high" on exit
- ; Protocol To use an Opus-CBCS style external protocol for Terminal Mode
- ; Serial Register BinkleyTerm with a serial number of your choosing
- ; StatusLog Path/filename of the desired log file, if any
- ; Downloads Path to put downloaded files into
- ; CaptureFile Designates file to use with Alt-L session logging feature
- ; LogLevel Amount of logging desired, 1-5 (1=minimal, 5=maximal)
- ; Gong Gong on successful connection or file transfer in terminal mode
- ; Rev3 Forces BinkleyTerm to assume Revision 3 FOSSIL driver
- ; SlowModem Add 1/10th second delay between modem command characters
- ; LockBaud Used with <reliable connect string>, or <baud rate> to lock port
- ; AutoBaud Always dial at baud rate listed above instead of nodelist rate
- ; TaskView Tells BinkleyTerm to release time slice on TaskView systems
- ; TopView Tells BinkleyTerm to release time slice on TopView systems
- ; MultiLink Tells BinkleyTerm to release time slice on MultiLink systems
- ; Macro Sends string over the line in Terminal Mode (Alt-F1 thru Alt-F9)
- ; Include Designates name of file with additional configuration statements
- ; Application Ignored by BinkleyTerm, may be used by other applications
- ; AnswerBack Sends designated text in response to ENQ char in Terminal Mode
- ; PollTries Number of times BT will dial during a dial or poll
- ; SwapDir Enables shell swapping and designates dir to place swap file
- ;
- ; ----------------------------------------------------------------------------
- ;
- Port 1
- Baud 38400
- Carrier 80
- ; NOTE! Refer to BT_REF.DOC for dial translation characters
- Init ATV1Q0X4|
- TermInit ATV1Q0X4E1|
- Prefix ATDT
- ; Suffix
- ; Busy ATM0H1|
- ; WARNING! Refer to BT_REF.DOC for details about 'Answer' statement!
- ; Answer ATA|
- ; PreDial `
- ; PreInit |v``^``
- ; ModemTrans 1 prefix/suffix ; HST
- ; ModemTrans 2 prefix/suffix ; PEP
- ; ModemTrans 3 prefix/suffix ; HST or PEP
- ; DTRHigh
- ; Protocol c:\opus\kermit.exe
- ; Serial
- StatusLog c:\binkley\binkley.log
- Downloads c:\binkley\downloads\
- CaptureFile c:\binkley\session.log
- LogLevel 5
- Gong
- ; Rev3
- ; SlowModem
- ; LockBaud /ARQ
- AutoBaud
- ; TaskView
- ; TopView
- ; MultiLink
- ; NOTE! In the next statement, Alt-F1 would send "Name" + carriage return
- ; Macro 1 Name|
- ; NOTE! In the next statement, Alt-F2 would send "Password" + carriage return
- ; Macro 2 Password|
- ; Include suplmnt.cfg
- ; Application Amax Direct
- ; AnswerBack My Name|
- ; PollTries 10
- ; SwapDir f:\ramdisk\
- ;
- ; ----------------------------------------------------------------------------
- ; In addition to the above, if you intend to run BinkleyTerm for point
- ; operation or mail interface operation, the following also may apply:
- ; ----------------------------------------------------------------------------
- ;
- ; System Name of your system (if mail interface, BBS name)
- ; Sysop Your name
- ; Address Your network address, including zone
- ; NoZones Causes zone support to be turned off, as in BT 1.50 and ealier
- ; PrivateNet Designates private network number, used with fakenet point nets
- ; Boss Net/Node of your Boss (if NOT a point, then your node address)
- ; BossPhone Phone number for your Boss (override nodelist)
- ; BossPwd Password for use during Boss mail sessions (overrides nodelist)
- ; NetMail Location of your "Matrix" message area
- ; NetFile (Default) Location of your inbound files area
- ; KnownInbound (Known) Location of your inbound files area
- ; ProtInbound (Protected) Location of your inbound files area
- ; Hold Location of your outbound hold area
- ; Domain Define domain name, 8-char abbreviation, nodelist filename
- ; Nodelist Where your system stores its nodelist files
- ; Version6 Tells BinkleyTerm to expect Version 6 compiled nodelist
- ; Version7 Tells BinkleyTerm to expect Version 7 compiled nodelist
- ; Dial Dial translation entries (refer to docs for details)
- ; ScriptPath Designates directory to find outward dialing scripts
- ; Reader Command line to invoke reader/editor with Alt-E command
- ; Overwrite Allows overwriting of existing inbound files of the same name
- ; (ARCmail files excepted)
- ; Unattended Makes BinkleyTerm always start-up in unattended (mailer) mode
- ; NoFullScreen Forces BinkleyTerm to not use the fancy full screen mode
- ; BoxType Designates type of boxes to draw for windowed interface
- ; Colors For windowed interface, gives screen color attributes
- ; NOTE! The winner of our screen colors contest is Mark Kromm of 1:261/1034
- ; NOTE! Mark gets a configuration verb named after him - and here it is!
- ; Mark_Kromm Makes colors 112, 9, 10, 11, 14 and 12
- ; ScreenBlank If used, makes screen blank after Blankwait <sec> of inactivity
- ; Blankwait Number of seconds to wait before blanking screen
- ; CursorCol Gives screen column number for cursor "resting place"
- ; CursorRow Gives screen row number for cursor "resting place"
- ; NoSlo Tells BinkleyTerm not to use SEAlink Overdrive
- ; SmallWindow Reduces "run ahead" during LoTek transfers (for hi-speed modems)
- ; StartBlkLen Starting block length to use in Wazoo mail transfers (64-1024)
- ; Okfile (Default) List of files okay for file request (for Binkley)
- ; Avail (Default) List of files okay for file request (for humans)
- ; About (Default) Your system's advertisement
- ; MaxReq (Default) Maximum files to be sent during any one f'req session
- ; MaxBytes (Default) Maximum bytes to be sent in one session's freqs
- ; MaxTime (Default) Maximum minutes allowed for a file request session
- ; KnownReqList (Known) List of files okay for file request (for Binkley)
- ; KnownAvail (Known) List of files okay for file request (for humans)
- ; KnownAbout (Known) Your system's advertisement
- ; KnownReqLim (Known) Maximum files to be sent during any one f'req session
- ; KnownMaxBytes (Known) Maximum bytes to be sent in one session's freqs
- ; KnownMaxTime (Known) Maximum minutes allowed for a file request session
- ; ProtReqList (Protected) List of files okay for file request (for Binkley)
- ; ProtAvail (Protected) List of files okay for file request (for humans)
- ; ProtAbout (Protected) Your system's advertisement
- ; ProtReqLim (Protected) Maximum files to be sent during any one f'req sess
- ; ProtMaxBytes (Protected) Maximum bytes to be sent in one session's freqs
- ; ProtMaxTime (Protected) Maximum minutes allowed for a file request session
- ; NoRequests Makes your system refuse any and all file requests
- ; ReqOnUs Whether to send inbound F Reqs when you initiate the call
- ; ReqTemplate (Default) Name of request response file template
- ; KnownReqTpl (Known) Name of request response file template
- ; ProtReqTpl (Protected) Name of request response file template
- ; NoPickup Tells BinkleyTerm to send mail during a session and not take any
- ; NoSharing Disables file sharing calls in networked environments
- ; RingTries Number of unanswered rings before Bink hangs up outbound call
- ; SameRing For modems that use RING reponse on inbound and outbound calls
- ; NoCollide Disables call collision detection for modems that hate it
- ; Shell DOS Shells...jumps to DOS, issues command (Alt-F1 thru Alt-F9)
- ; Timeout How long to wait for mail before assuming a human caller
- ; Banner Line displayed when someone calls
- ; BBSNote String to send to callers after they press Escape
- ; DoingMail String to send to callers during non-BBS events
- ; EnterBBS String to send to callers to prompt for input to access BBS
- ; ExtrnMail Designates errorlevel exit and string to match for external
- ; mailer or user-selected BBS functionality
- ; MailNote String to send when external mail handler is being loaded
- ; BBS Type of exit to the BBS to make when someone calls
- ; AfterMail Program or batch file invoked after receiving mail to process
- ; Cleanup Program or batch file invoked once before each scheduled event
- ; Packer Program or batch file invoked once just after 'Cleanup' is run
- ; NoWaZOO Forces BT to be an FSC-only mailer
- ; Janusbaud Baud rate at or below which all sessions could do Janus
- ; JanusOK Modem connect string for Janusbaud exception condition
- ; TaskNumber Arbitary task identifier for use in multitasking situations
- ; Flags Directory in which task identifier is created
- ;
- ; ----------------------------------------------------------------------------
- ;
- System BinkleyTerm Test System
- Sysop BinkleyTerm Tester
- Address 1:9999/9999.4@fidonet.org ; Default address
- ;Address 7:9876/5432.0@alternet.ftn ; Address for alternet Zone 7
- ;Address 99:1234/5678.0@eggnet.ftn ; Address for eggnet Zone 99
- ;NoZones
- ; PrivateNet 9999
- ; Boss 9999/9999
- ; BossPhone 555-1234
- ; BossPwd Password
- NetMail c:\binkley\mail\
- NetFile c:\binkley\file\
- ; KnownInbound c:\binkley\fileknow\
- ; ProtInbound c:\binkley\fileprot\
- Hold c:\binkley\outbound\
- ;
- Domain fidonet.org fidonet nodelist
- ; Domain alternet.ftn alternet anetlist
- ; Domain eggnet.ftn eggnet egglist
- ;
- Nodelist c:\binkley\
- Version6
- ; Version7
- ; Dial 1-404- "GA_PCP.SCR"404/ ; Example of dial translation
- ; Dial 1-603-888 888/ ; Example of dial translation
- ; ScriptPath c:\binkley\scripts\
- Reader c:\sirius\sirius
- ; Overwrite
- ; Unattended
- ; NoFullScreen
- BoxType 2
- ; Colors 113 30 30 30 31 31 113 15 ; Requires VFOSSIL
- Mark_Kromm ; Requires VFOSSIL
- ; ScreenBlank ; Requires VFOSSIL
- ; ScreenBlank Call ; Requires VFOSSIL
- ; BlankWait 60
- ; CursorCol 1
- ; CursorRow 1
- ; NoSlo
- ; SmallWindow
- Okfile c:\binkley\okfile1.txt
- Avail c:\binkley\myfiles1.arc
- About c:\binkley\mysys1.txt
- MaxReq 2
- MaxBytes 400000
- MaxTime 30
- ; KnownReqList c:\binkley\okfile2.txt
- ; KnownAvail c:\binkley\myfiles2.arc
- ; KnownAbout c:\binkley\mysys2.txt
- ; KnownReqLim 5
- ; KnownMaxBytes 600000
- ; KnownMaxTime 45
- ; ProtReqList c:\binkley\okfile3.txt
- ; ProtAvail c:\binkley\myfiles3.arc
- ; ProtAbout c:\binkley\mysys3.txt
- ; ProtReqLim 15
- ; ProtMaxBytes 1000000
- ; ProtMaxTime 60
- ; NoRequests
- ; ReqOnUs
- ReqTemplate c:\binkley\sample.tpl
- ; KnownReqTpl c:\binkley\known.tpl
- ; ProtReqTpl c:\binkley\prot.tpl
- ; NoPickup
- ; NoSharing
- ; RingTries 5
- ; SameRing
- ; NoCollide
- ; Shell 1 Sysopus ; Alt-F1 would send "Sysopus" to COMMAND.COM
- ; Shell 2 Amax ; Alt-F2 would send "Amax" to COMMAND.COM
- Timeout 20
- Banner Welcome to my FABULOUS BinkleyTerm System!
- BBSNote Thank you. Now loading BBS. Please wait...
- DoingMail Sorry, we're not available right now. Processing mail only.
- EnterBBS Please press your Escape key to enter the BBS, or wait a few moments.
- ; ExtrnMail 140 Gimme UUCP
- ; ExtrnMail 150 Gimme WidgetLink
- ; MailNote Now loading UUCP...please wait...
- ; BBS Exit
- ; BBS Spawn
- BBS Batch
- ; AfterMail Unpack.Bat
- ; CleanUp Scrub.Bat
- ; Packer Pack.Bat
- ; NoWaZOO
- ;
- Janusbaud 2400
- JanusOK /Arq/V32
- JanusOK /V32
- ;
- ; TaskNumber 1
- ; Flags c:\binkley\flags
- ;
- ; ----------------------------------------------------------------------------
- ; Please refer to the documentation for more details on BinkleyTerm set-up...
- ; That's why there's documentation included in the package.
- ; ----------------------------------------------------------------------------
- ;
-
