wait : time in seconds before item respawns after being picked up (default 40, -1 = never respawn).
random : random time variance in seconds added or subtracted from "wait" delay (default 0 - see Notes).
count: sets the amount of ammo given to the player when picked up (default 15).
team : set this to team items. Teamed items will respawn randomly after team master is picked up (see Notes).
target : picking up the item will trigger the entity this points to.
targetname : a target_give entity can point to this for respawn freebies.
notfree : when set to 1, entity will not spawn in "Free for all" and "Tournament" modes.
notteam : when set to 1, entity will not spawn in "Teamplay" and "CTF" modes.
notsingle : when set to 1, entity will not spawn in Single Player mode (bot play mode).
notbot : used to make an item invisible for bot attraction.
-------- SPAWNFLAGS --------
SUSPENDED : item will spawn where it was placed in map and won't drop to the floor.
-------- NOTES --------
The amount of time it takes for an item in the team to respawn is determined by the "wait" value of the item that was picked up previously. So if one of the items in the team has it's "wait" key set to -1 (never respawn), the random respawning cycle of the teamed items will stop after that item is picked up.
When the random key is set, its value is used to calculate a minimum and a maximum delay. The final time delay will be a random value anywhere between the minimum and maximum values: (min delay = wait - random) (max delay = wait + random).
-------- MODEL FOR RADIANT ONLY - DO NOT SET THIS AS A KEY --------
wait : time in seconds before item respawns after being picked up (default 40, -1 = never respawn).
random : random time variance in seconds added or subtracted from "wait" delay (default 0 - see Notes).
count: sets the amount of ammo given to the player when picked up (default 50).
team : set this to team items. Teamed items will respawn randomly after team master is picked up (see Notes).
target : picking up the item will trigger the entity this points to.
targetname : a target_give entity can point to this for respawn freebies.
notfree : when set to 1, entity will not spawn in "Free for all" and "Tournament" modes.
notteam : when set to 1, entity will not spawn in "Teamplay" and "CTF" modes.
notsingle : when set to 1, entity will not spawn in Single Player mode (bot play mode).
notbot : used to make an item invisible for bot attraction.
-------- SPAWNFLAGS --------
SUSPENDED : item will spawn where it was placed in map and won't drop to the floor.
-------- NOTES --------
The amount of time it takes for an item in the team to respawn is determined by the "wait" value of the item that was picked up previously. So if one of the items in the team has it's "wait" key set to -1 (never respawn), the random respawning cycle of the teamed items will stop after that item is picked up.
When the random key is set, its value is used to calculate a minimum and a maximum delay. The final time delay will be a random value anywhere between the minimum and maximum values: (min delay = wait - random) (max delay = wait + random).
-------- MODEL FOR RADIANT ONLY - DO NOT SET THIS AS A KEY --------
wait : time in seconds before item respawns after being picked up (default 40, -1 = never respawn).
random : random time variance in seconds added or subtracted from "wait" delay (default 0 - see Notes).
count: sets the amount of ammo given to the player when picked up (default 30).
team : set this to team items. Teamed items will respawn randomly after team master is picked up (see Notes).
target : picking up the item will trigger the entity this points to.
targetname : a target_give entity can point to this for respawn freebies.
notfree : when set to 1, entity will not spawn in "Free for all" and "Tournament" modes.
notteam : when set to 1, entity will not spawn in "Teamplay" and "CTF" modes.
notsingle : when set to 1, entity will not spawn in Single Player mode (bot play mode).
notbot : used to make an item invisible for bot attraction.
-------- SPAWNFLAGS --------
SUSPENDED : item will spawn where it was placed in map and won't drop to the floor.
-------- NOTES --------
The amount of time it takes for an item in the team to respawn is determined by the "wait" value of the item that was picked up previously. So if one of the items in the team has it's "wait" key set to -1 (never respawn), the random respawning cycle of the teamed items will stop after that item is picked up.
When the random key is set, its value is used to calculate a minimum and a maximum delay. The final time delay will be a random value anywhere between the minimum and maximum values: (min delay = wait - random) (max delay = wait + random).
-------- MODEL FOR RADIANT ONLY - DO NOT SET THIS AS A KEY --------
Grenade Launcher ammo. Gives the player 5 by default.
-------- KEYS --------
wait : time in seconds before item respawns after being picked up (default 40, -1 = never respawn).
random : random time variance in seconds added or subtracted from "wait" delay (default 0 - see Notes).
count: sets the amount of ammo given to the player when picked up (default 5).
team : set this to team items. Teamed items will respawn randomly after team master is picked up (see Notes).
target : picking up the item will trigger the entity this points to.
targetname : a target_give entity can point to this for respawn freebies.
notfree : when set to 1, entity will not spawn in "Free for all" and "Tournament" modes.
notteam : when set to 1, entity will not spawn in "Teamplay" and "CTF" modes.
notsingle : when set to 1, entity will not spawn in Single Player mode (bot play mode).
notbot : used to make an item invisible for bot attraction.
-------- SPAWNFLAGS --------
SUSPENDED : item will spawn where it was placed in map and won't drop to the floor.
-------- NOTES --------
The amount of time it takes for an item in the team to respawn is determined by the "wait" value of the item that was picked up previously. So if one of the items in the team has it's "wait" key set to -1 (never respawn), the random respawning cycle of the teamed items will stop after that item is picked up.
When the random key is set, its value is used to calculate a minimum and a maximum delay. The final time delay will be a random value anywhere between the minimum and maximum values: (min delay = wait - random) (max delay = wait + random).
-------- MODEL FOR RADIANT ONLY - DO NOT SET THIS AS A KEY --------
Lightning Gun ammo. Gives the player 60 by default.
-------- KEYS --------
wait : time in seconds before item respawns after being picked up (default 40, -1 = never respawn).
random : random time variance in seconds added or subtracted from "wait" delay (default 0 - see Notes).
count: sets the amount of ammo given to the player when picked up (default 60).
team : set this to team items. Teamed items will respawn randomly after team master is picked up (see Notes).
target : picking up the item will trigger the entity this points to.
targetname : a target_give entity can point to this for respawn freebies.
notfree : when set to 1, when set to 1, entity will not spawn in "Free for all" and "Tournament" modes.
notteam : when set to 1, entity will not spawn in "Teamplay" and "CTF" modes.
notsingle : when set to 1, entity will not spawn in Single Player mode (bot play mode).
notbot : used to make an item invisible for bot attraction.
-------- SPAWNFLAGS --------
SUSPENDED : item will spawn where it was placed in map and won't drop to the floor.
-------- NOTES --------
The amount of time it takes for an item in the team to respawn is determined by the "wait" value of the item that was picked up previously. So if one of the items in the team has it's "wait" key set to -1 (never respawn), the random respawning cycle of the teamed items will stop after that item is picked up.
When the random key is set, its value is used to calculate a minimum and a maximum delay. The final time delay will be a random value anywhere between the minimum and maximum values: (min delay = wait - random) (max delay = wait + random).
-------- MODEL FOR RADIANT ONLY - DO NOT SET THIS AS A KEY --------
Rocket Launcher ammo. Gives the player 5 by default.
-------- KEYS --------
wait : time in seconds before item respawns after being picked up (default 40, -1 = never respawn).
random : random time variance in seconds added or subtracted from "wait" delay (default 0 - see Notes).
count: sets the amount of ammo given to the player when picked up (default 5).
team : set this to team items. Teamed items will respawn randomly after team master is picked up (see Notes).
target : picking up the item will trigger the entity this points to.
targetname : a target_give entity can point to this for respawn freebies.
notfree : when set to 1, entity will not spawn in "Free for all" and "Tournament" modes.
notteam : when set to 1, entity will not spawn in "Teamplay" and "CTF" modes.
notsingle : when set to 1, entity will not spawn in Single Player mode (bot play mode).
notbot : used to make an item invisible for bot attraction.
-------- SPAWNFLAGS --------
SUSPENDED : item will spawn where it was placed in map and won't drop to the floor.
-------- NOTES --------
The amount of time it takes for an item in the team to respawn is determined by the "wait" value of the item that was picked up previously. So if one of the items in the team has it's "wait" key set to -1 (never respawn), the random respawning cycle of the teamed items will stop after that item is picked up.
When the random key is set, its value is used to calculate a minimum and a maximum delay. The final time delay will be a random value anywhere between the minimum and maximum values: (min delay = wait - random) (max delay = wait + random).
-------- MODEL FOR RADIANT ONLY - DO NOT SET THIS AS A KEY --------
wait : time in seconds before item respawns after being picked up (default 40, -1 = never respawn).
random : random time variance in seconds added or subtracted from "wait" delay (default 0 - see Notes).
count: sets the amount of ammo given to the player when picked up (default 10).
team : set this to team items. Teamed items will respawn randomly after team master is picked up (see Notes).
target : picking up the item will trigger the entity this points to.
targetname : a target_give entity can point to this for respawn freebies.
notfree : when set to 1, entity will not spawn in "Free for all" and "Tournament" modes.
notteam : when set to 1, entity will not spawn in "Teamplay" and "CTF" modes.
notsingle : when set to 1, entity will not spawn in Single Player mode (bot play mode).
notbot : used to make an item invisible for bot attraction.
-------- SPAWNFLAGS --------
SUSPENDED : item will spawn where it was placed in map and won't drop to the floor.
-------- NOTES --------
The amount of time it takes for an item in the team to respawn is determined by the "wait" value of the item that was picked up previously. So if one of the items in the team has it's "wait" key set to -1 (never respawn), the random respawning cycle of the teamed items will stop after that item is picked up.
When the random key is set, its value is used to calculate a minimum and a maximum delay. The final time delay will be a random value anywhere between the minimum and maximum values: (min delay = wait - random) (max delay = wait + random).
-------- MODEL FOR RADIANT ONLY - DO NOT SET THIS AS A KEY --------
wait : time in seconds before item respawns after being picked up (default 40, -1 = never respawn).
random : random time variance in seconds added or subtracted from "wait" delay (default 0 - see Notes).
count: sets the amount of ammo given to the player when picked up (default 10).
team : set this to team items. Teamed items will respawn randomly after team master is picked up (see Notes).
target : picking up the item will trigger the entity this points to.
targetname : a target_give entity can point to this for respawn freebies.
notfree : when set to 1, entity will not spawn in "Free for all" and "Tournament" modes.
notteam : when set to 1, entity will not spawn in "Teamplay" and "CTF" modes.
notsingle : when set to 1, entity will not spawn in Single Player mode (bot play mode).
notbot : used to make an item invisible for bot attraction.
-------- SPAWNFLAGS --------
SUSPENDED : item will spawn where it was placed in map and won't drop to the floor.
-------- NOTES --------
The amount of time it takes for an item in the team to respawn is determined by the "wait" value of the item that was picked up previously. So if one of the items in the team has it's "wait" key set to -1 (never respawn), the random respawning cycle of the teamed items will stop after that item is picked up.
When the random key is set, its value is used to calculate a minimum and a maximum delay. The final time delay will be a random value anywhere between the minimum and maximum values: (min delay = wait - random) (max delay = wait + random).
-------- MODEL FOR RADIANT ONLY - DO NOT SET THIS AS A KEY --------
Solid entity that oscillates back and forth in a linear motion. By default, it will have an amount of displacement in either direction equal to the dimension of the brush in the axis in which it's bobbing. Entity bobs on the Z axis (up-down) by default. It can also emit sound if the "noise" key is set. Will crush the player when blocked.
-------- KEYS --------
speed : amount of time in seconds for one complete oscillation cycle (default 4).
height : sets the amount of travel of the oscillation movement (default 32).
phase : sets the start offset of the oscillation cycle. Values must be 0 < phase < 1. Any integer phase value is the same as no offset (default 0).
noise : path/name of .wav file to play. Use looping sounds only (eg. sound/world/drone6.wav - See Notes).
model2 : path/name of model to include (eg: models/mapobjects/jets/jets01.md3).
origin : alternate method of setting XYZ origin of sound and .md3 model included with entity (See Notes).
light : constantLight radius of .md3 model included with entity. Has no effect on the entity's brushes (default 0).
color : constantLight color of .md3 model included with entity. Has no effect on the entity's brushes (default 1 1 1).
notfree : when set to 1, entity will not spawn in "Free for all" and "Tournament" modes.
notteam : when set to 1, entity will not spawn in "Teamplay" and "CTF" modes.
notsingle : when set to 1, entity will not spawn in Single Player mode (bot play mode).
-------- SPAWNFLAGS --------
X_AXIS : entity will bob along the X axis.
Y_AXIS : entity will bob along the Y axis.
-------- NOTES --------
In order for the sound to be emitted from the entity, it is recommended to include a brush with an origin shader at its center, otherwise the sound will not follow the entity as it moves. Setting the origin key is simply an alternate method to using an origin brush. When using the model2 key, the origin point of the model will correspond to the origin point defined by either the origin brush or the origin coordinate value.*/
When a button is touched by a player, it moves in the direction set by the "angle" key, triggers all its targets, stays pressed by an amount of time set by the "wait" key, then returns to it's original position where it can be operated again.
-------- KEYS --------
angle : determines the direction in which the button will move (up = -1, down = -2).
target : all entities with a matching targetname will be triggered.
speed : speed of button's displacement (default 40).
wait : number of seconds button stays pressed (default 1, -1 = return immediately).
lip : lip remaining at end of move (default 4 units).
health : (default 0) if set to any non-zero value, the button must take damage (any amount) to activate.
light : constantLight radius of .md3 model included with entity. Has no effect on the entity's brushes (default 0).
color : constantLight color of .md3 model included with entity. Has no effect on the entity's brushes (default 1 1 1).
model2 : path/name of model to include (eg: models/mapobjects/pipe/pipe02.md3).
origin : alternate method of setting XYZ origin of .md3 model included with entity (See Notes).
notfree : when set to 1, entity will not spawn in "Free for all" and "Tournament" modes.
notteam : when set to 1, entity will not spawn in "Teamplay" and "CTF" modes.
notsingle : when set to 1, entity will not spawn in Single Player mode (bot play mode).
-------- NOTES --------
Setting the origin key is simply an alternate method to using an origin brush. When using the model2 key, the origin point of the model will correspond to the origin point defined by either the origin brush or the origin coordinate value.*/
Normal sliding door entity. By default, the door will activate when player walks close to it or when damage is inflicted to it.
-------- KEYS --------
angle : determines the opening direction of door (up = -1, down = -2).
speed : determines how fast the door moves (default 100).
wait : number of seconds before door returns (default 2, -1 = return immediately)
lip : lip remaining at end of move (default 8)
targetname : if set, a func_button or trigger is required to activate the door.
health : (default 0) if set to any non-zero value, the button must take damage (any amount) to activate.
dmg : damage to inflict on player when he blocks operation of door (default 4). Door will reverse direction when blocked unless CRUSHER spawnflag is set.
team: assign the same team name to multiple doors that should operate together (see Notes).
light : constantLight radius of .md3 model included with entity. Has no effect on the entity's brushes (default 0).
color : constantLight color of .md3 model included with entity. Has no effect on the entity's brushes (default 1 1 1).
model2 : path/name of model to include (eg: models/mapobjects/pipe/pipe02.md3).
origin : alternate method of setting XYZ origin of .md3 model included with entity (See Notes).
notfree : when set to 1, entity will not spawn in "Free for all" and "Tournament" modes.
notteam : when set to 1, entity will not spawn in "Teamplay" and "CTF" modes.
notsingle : when set to 1, entity will not spawn in Single Player mode (bot play mode).
-------- SPAWNFLAGS --------
START_OPEN : the door will spawn in the open state and operate in reverse.
CRUSHER : door will not reverse direction when blocked and will keep damaging player until he dies or gets out of the way.
-------- NOTES --------
Unlike in Quake 2, doors that touch are NOT automatically teamed. If you want doors to operate together, you have to team them manually by assigning the same team name to all of them. Setting the origin key is simply an alternate method to using an origin brush. When using the model2 key, the origin point of the model will correspond to the origin point defined by either the origin brush or the origin coordinate value.*/
This is not an entity as such. It is strictly an editor utility to group world brushes and patches together for convenience (selecting, moving, copying, etc). You cannot group entities with this.
-------- KEYS --------
alphamap : this is the path/name for the art file used to guide the mapping of textures on the terrain surface.
layers : this integer value is the number unique root shaders that will be use on the terrain.
shader : this is the path to the metashader used to assign textures to the terrain entity.
terrain : this is an on/off flag. When set to 1, the entity becomes a terrain entity.
-------- NOTES --------
The TAB key can be used to flip through the component pieces of a selected func_group entity, isolating individual components. To make a func_group into a terrain entity, refer to the Terrain Construction documentation.*/
Solid entity that describes a pendulum back and forth rotation movement. Rotates on the X axis by default. Pendulum frequency is a physical constant based on the length of the beam and gravity. Blocking the pendulum instantly kills a player.
-------- KEYS --------
angle : angle offset of axis of rotation from default X axis (default 0).
speed : angle of swing arc in either direction from initial position (default 30).
phase : sets the start offset of the swinging cycle. Values must be 0 < phase < 1. Any integer phase value is the same as no offset (default 0).
noise : path/name of .wav file to play. Use looping sounds only (eg. sound/world/drone6.wav).
model2 : path/name of model to include (eg: models/mapobjects/jets/jets01.md3).
origin : alternate method of setting XYZ origin of entity's rotation axis and .md3 model included with entity (default "0 0 0" - See Notes).
light : constantLight radius of .md3 model included with entity. Has no effect on the entity's brushes (default 0).
color : constantLight color of .md3 model included with entity. Has no effect on the entity's brushes (default 1 1 1).
notfree : when set to 1, entity will not spawn in "Free for all" and "Tournament" modes.
notteam : when set to 1, entity will not spawn in "Teamplay" and "CTF" modes.
notsingle : when set to 1, entity will not spawn in Single Player mode (bot play mode).
-------- NOTES --------
You need to have an origin brush as part of this entity. The center of that brush will be the point through which the rotation axis passes. Setting the origin key is simply an alternate method to using an origin brush. Pendulum will rotate along the X axis by default. Very crude operation: pendulum cannot rotate along Z axis, the speed of swing (frequency) is not adjustable. When using the model2 key, the origin point of the model will correspond to the origin point defined by either the origin brush or the origin coordinate value.*/
Rising platform the player can ride to reach higher places. Plats must always be drawn in the raised position, so they will operate and be lighted correctly but they spawn in the lowered position. The plat will stay in the raised position until the player steps off. There are no proper sounds for this entity, only beep noises. It will spawn in the game and work properly but it sounds silly (see Notes).
-------- KEYS --------
speed : determines how fast the plat moves (default 150).
lip : lip remaining at end of move (default 16). Has no effect if "height" is set.
height : if set, this will determine the total amount of vertical travel of the plat.
dmg : damage to inflict on player when he blocks operation of plat (default 4). Plat will reverse direction when blocked.
targetname : if set, the trigger that points to this will raise the plat each time it fires. The plat raises and comes back down a second later if no player is on it.
light : constantLight radius of .md3 model included with entity. Has no effect on the entity's brushes (default 0).
color : constantLight color of .md3 model included with entity. Has no effect on the entity's brushes (default 1 1 1).
model2 : path/name of model to include (eg: models/mapobjects/pipe/pipe02.md3).
origin : alternate method of setting XYZ origin of .md3 model included with entity (See Notes).
notfree : when set to 1, entity will not spawn in "Free for all" and "Tournament" modes.
notteam : when set to 1, entity will not spawn in "Teamplay" and "CTF" modes.
notsingle : when set to 1, entity will not spawn in Single Player mode (bot play mode).
-------- NOTES --------
By default, the total amount of vertical travel of a platform is implicitly determined by the overall vertical size of the brushes of which it's made minus the lip value. But if the "height" key is used, then the total amount of vertical travel of the plat will be exactly that value regardless of the shape and size of the plat and regardless of the value of the "lip" key. Using the "height" key is the best method for any kind of platforms and the only possible one for thin plats which need to travel vertical distances many times their own thickness. Setting the origin key is simply an alternate method to using an origin brush. When using the model2 key, the origin point of the model will correspond to the origin point defined by either the origin brush or the origin coordinate value.
There is a way to make plats play proper sounds. Just create a sound\movers\plats folder under baseq3 and put 2 sounds named pt1_strt.wav and pt1_end.wav in it. Those can be the renamed sounds from the Q2 plats or renamed copies of the sound\movers\doors sounds you can extract from your pak0.pk3 file or new custom sounds if you're up to it. Thanks to Fragzilla for the tip.*/
Solid entity that rotates continuously. Rotates on the Z axis by default and requires an origin brush. It will always start on in the game and is not targetable.
-------- KEYS --------
speed : determines how fast entity rotates (default 100).
noise : path/name of .wav file to play. Use looping sounds only (eg. sound/world/drone6.wav).
model2 : path/name of model to include (eg: models/mapobjects/bitch/fembotbig.md3).
origin : alternate method of setting XYZ origin of entity's rotation axis and .md3 model included with entity (default "0 0 0" - See Notes).
light : constantLight radius of .md3 model included with entity. Has no effect on the entity's brushes (default 0).
color : constantLight color of .md3 model included with entity. Has no effect on the entity's brushes (default 1 1 1).
notfree : when set to 1, entity will not spawn in "Free for all" and "Tournament" modes.
notteam : when set to 1, entity will not spawn in "Teamplay" and "CTF" modes.
notsingle : when set to 1, entity will not spawn in Single Player mode (bot play mode).
-------- SPAWNFLAGS --------
X_AXIS : entity will rotate along the X axis.
Y_AXIS : entity will rotate along the Y axis.
-------- NOTES --------
You need to have an origin brush as part of this entity. The center of that brush will be the point through which the rotation axis passes. Setting the origin key is simply an alternate method to using an origin brush. It will rotate along the Z axis by default. You can check either the X_AXIS or Y_AXIS box to change that. When using the model2 key, the origin point of the model will correspond to the origin point defined by either the origin brush or the origin coordinate value.*/
Static non-solid bspmodel. Can be used for conditional walls and models.
-------- KEYS --------
model2 : path/name of model to include (eg: models/mapobjects/bitch/fembotbig.md3).
origin : alternate method of setting XYZ origin of .md3 model included with entity (See Notes).
light : constantLight radius of .md3 model included with entity. Has no effect on the entity's brushes (default 0).
color : constantLight color of .md3 model included with entity. Has no effect on the entity's brushes (default 1 1 1).
targetname : NOT SUPPORTED BY RENDERER - if set, a func_button or trigger can make entity disappear from the game (See Notes).
notfree : when set to 1, entity will not spawn in "Free for all" and "Tournament" modes.
notteam : when set to 1, entity will not spawn in "Teamplay" and "CTF" modes.
notsingle : when set to 1, entity will not spawn in Single Player mode (bot play mode).
-------- NOTES --------
When using the model2 key, the origin point of the model will correspond to the origin point defined by either the origin brush or the origin coordinate value. If a model is included with a targeted func_static, the brush(es) of the entity will be removed from the game but the .md3 model won't: it will automatically be moved to the (0 0 0) world origin so you should NOT include an .md3 model to a targeted func_static.
Because the map has only a single bot navigation file, func_static's cannot be used to make significant changes in game play flow between differing game types.*/
Time delay trigger that will continuously fire its targets after a preset time delay. The time delay can also be randomized. When triggered, the timer will toggle on/off.
-------- KEYS --------
wait : delay in seconds between each triggering of its targets (default 1).
random : random time variance in seconds added or subtracted from "wait" delay (default 0 - see Notes).
target : this points to the entities to trigger.
targetname : a func_button or trigger that points to this will toggle the timer on/off when activated.
notfree : when set to 1, entity will not spawn in "Free for all" and "Tournament" modes.
notteam : when set to 1, entity will not spawn in "Teamplay" and "CTF" modes.
notsingle : when set to 1, entity will not spawn in Single Player mode (bot play mode).
-------- SPAWNFLAGS --------
START_ON : timer will start on in the game and continuously fire its targets.
-------- NOTES --------
When the random key is set, its value is used to calculate a minimum and a maximum delay. The final time delay will be a random value anywhere between the minimum and maximum values: (min delay = wait - random) (max delay = wait + random).*/
Trains are moving solids that follow a string of path_corner entities. Trains in Q3A are very basic, they also require an origin brush (see Notes).
-------- KEYS --------
speed : speed of displacement of train (default 100 or overridden by speed value of path).
target : this points to the first path_corner of the path which is also the spawn location of the train's origin.
model2 : path/name of model to include (eg: models/mapobjects/pipe/pipe02.md3).
origin : alternate method of setting XYZ origin of the train's brush(es) and .md3 model included with entity (See Notes).
light : constantLight radius of .md3 model included with entity. Has no effect on the entity's brushes (default 0).
color : constantLight color of .md3 model included with entity. Has no effect on the entity's brushes (default 1 1 1).
notfree : when set to 1, entity will not spawn in "Free for all" and "Tournament" modes.
notteam : when set to 1, entity will not spawn in "Teamplay" and "CTF" modes.
notsingle : when set to 1, entity will not spawn in Single Player mode (bot play mode).
-------- NOTES --------
1. Trains always start on in the game.
2. Trains do not damage the played when blocked.
3. Trains cannot emit sound.
4. Trains are not triggerable or toggle-able.
5. Trains cannot be block-stopped just by getting in their way, the player must be wedged between the train and another obstacle to block it.
Setting the origin key is simply an alternate method to using an origin brush. When using the model2 key, the origin point of the model will correspond to the origin point defined by either the origin brush or the origin coordinate value.*/
Medkit that can be picked up and used later. Brings the player's health back to 100 when used. Player can only carry one holdable item at a time.
-------- KEYS --------
wait : time in seconds before item respawns after being picked up (default 60, -1 = never respawn).
random : random time variance in seconds added or subtracted from "wait" delay (default 0 - see Notes).
team : set this to team items. Teamed items will respawn randomly after team master is picked up (see Notes).
target : picking up the item will trigger the entity this points to.
targetname : a target_give entity can point to this for respawn freebies.
notfree : when set to 1, entity will not spawn in "Free for all" and "Tournament" modes.
notteam : when set to 1, entity will not spawn in "Teamplay" and "CTF" modes.
notsingle : when set to 1, entity will not spawn in Single Player mode (bot play mode).
notbot : used to make an item invisible for bot attraction.
-------- SPAWNFLAGS --------
SUSPENDED : item will spawn where it was placed in map and won't drop to the floor.
-------- NOTES --------
The amount of time it takes for an item in the team to respawn is determined by the "wait" value of the item that was picked up previously. So if one of the items in the team has it's "wait" key set to -1 (never respawn), the random respawning cycle of the teamed items will stop after that item is picked up.
When the random key is set, its value is used to calculate a minimum and a maximum delay. The final time delay will be a random value anywhere between the minimum and maximum values: (min delay = wait - random) (max delay = wait + random).
-------- MODEL FOR RADIANT ONLY - DO NOT SET THIS AS A KEY --------
Teleporter item that can be picked up and used later. Teleports the player to a random player spawn point when used. Player can only carry one holdable item at a time.
-------- KEYS --------
wait : time in seconds before item respawns after being picked up (default 60, -1 = never respawn).
random : random time variance in seconds added or subtracted from "wait" delay (default 0 - see Notes).
team : set this to team items. Teamed items will respawn randomly after team master is picked up (see Notes).
target : picking up the item will trigger the entity this points to.
targetname : a target_give entity can point to this for respawn freebies.
notfree : when set to 1, entity will not spawn in "Free for all" and "Tournament" modes.
notteam : when set to 1, entity will not spawn in "Teamplay" and "CTF" modes.
notsingle : when set to 1, entity will not spawn in Single Player mode (bot play mode).
notbot : used to make an item invisible for bot attraction.
-------- SPAWNFLAGS --------
SUSPENDED : item will spawn where it was placed in map and won't drop to the floor.
-------- NOTES --------
The amount of time it takes for an item in the team to respawn is determined by the "wait" value of the item that was picked up previously. So if one of the items in the team has it's "wait" key set to -1 (never respawn), the random respawning cycle of the teamed items will stop after that item is picked up.
When the random key is set, its value is used to calculate a minimum and a maximum delay. The final time delay will be a random value anywhere between the minimum and maximum values: (min delay = wait - random) (max delay = wait + random).
-------- MODEL FOR RADIANT ONLY - DO NOT SET THIS AS A KEY --------
This atttracts bots which have a camping preference in their AI characteristics. It should be placed at least 32 units away from any brush surface.
-------- KEYS --------
range : number of units that the bot can move away from camp entity while camping on it.
weight : number that is compared against the weight assigned to all the other camp spots in the map to determine if a bot chooses to camp there. The value is normalized against all other weight values.
-------- NOTES --------
Examples of bots which have a high camping preference are: Razor, Tank Jr., Grunt, Patriot and Doom. Examples of bots which have a low camping preference are: Klesk, Mynx, Sarge, Keel and Xaero.*/
Used as a positional target for entities that can use directional pointing. A target_position can be used instead of this but was kept in Q3A for legacy purposes.
-------- KEYS --------
targetname : must match the target key of entity that uses this for pointing.
notfree : when set to 1, entity will not spawn in "Free for all" and "Tournament" modes.
notteam : when set to 1, entity will not spawn in "Teamplay" and "CTF" modes.
notsingle : when set to 1, entity will not spawn in Single Player mode (bot play mode).*/
Used as a positional target for light entities to create a spotlight effect. A target_position can be used instead of this but was kept in Q3A for legacy purposes.
-------- KEYS --------
targetname : must match the target key of entity that uses this for pointing.
notfree : when set to 1, entity will not spawn in "Free for all" and "Tournament" modes.
notteam : when set to 1, entity will not spawn in "Teamplay" and "CTF" modes.
notsingle : when set to 1, entity will not spawn in Single Player mode (bot play mode).*/
Camera for intermission screen between matches. This also automatically generates the podium for bot arena matches (see Notes). Can be aimed by setting the "angles" key or targeting an pointing to an aiming entity. Use only one per level.
-------- KEYS --------
angles: alternate "pitch, yaw, roll" angles method of aiming intermission camera (default 0 0 0).
target : point this to an info_notnull or target_position entity to set the camera's pointing angles.
-------- NOTES --------
In genuine bot arena matches, the podium for the 1st, 2nd and 3rd place players at the end of the match is generated by this entity. The podium's origin will automatically be located 128 units in the direction of the camera's view and 84 units down from the y height of the view line at that point. It will also always be generated on a level plane regardless of the pointing angle of the camera so if that angle is too steep, part of the podium model might not be visible. Make sure you leave at least 106 units of free space in front of where the camera points to otherwise the podium model won't be visible at all.*/
Red Armor - 100 points. All armor can be cumulated up to a maximum of 200 points and slowly wears out to 100 points.
-------- KEYS --------
wait : time in seconds before item respawns after being picked up (default 25, -1 = never respawn).
random : random time variance in seconds added or subtracted from "wait" delay (default 0 - see Notes).
team : set this to team items. Teamed items will respawn randomly after team master is picked up (see Notes).
target : picking up the item will trigger the entity this points to.
targetname : a target_give entity can point to this for respawn freebies.
notfree : when set to 1, entity will not spawn in "Free for all" and "Tournament" modes.
notteam : when set to 1, entity will not spawn in "Teamplay" and "CTF" modes.
notsingle : when set to 1, entity will not spawn in Single Player mode (bot play mode).
notbot : used to make an item invisible for bot attraction.
-------- SPAWNFLAGS --------
SUSPENDED : item will spawn where it was placed in map and won't drop to the floor.
-------- NOTES --------
The amount of time it takes for an item in the team to respawn is determined by the "wait" value of the item that was picked up previously. So if one of the items in the team has it's "wait" key set to -1 (never respawn), the random respawning cycle of the teamed items will stop after that item is picked up.
When the random key is set, its value is used to calculate a minimum and a maximum delay. The final time delay will be a random value anywhere between the minimum and maximum values: (min delay = wait - random) (max delay = wait + random).
-------- MODEL FOR RADIANT ONLY - DO NOT SET THIS AS A KEY --------
Yellow Armor - 50 points. All armor can be cumulated up to a maximum of 200 points and slowly wears out to 100 points.
-------- KEYS --------
wait : time in seconds before item respawns after being picked up (default 25, -1 = never respawn).
random : random time variance in seconds added or subtracted from "wait" delay (default 0 - see Notes).
team : set this to team items. Teamed items will respawn randomly after team master is picked up (see Notes).
target : picking up the item will trigger the entity this points to.
targetname : a target_give entity can point to this for respawn freebies.
notfree : when set to 1, entity will not spawn in "Free for all" and "Tournament" modes.
notteam : when set to 1, entity will not spawn in "Teamplay" and "CTF" modes.
notsingle : when set to 1, entity will not spawn in Single Player mode (bot play mode).
notbot : used to make an item invisible for bot attraction.
-------- SPAWNFLAGS --------
SUSPENDED : item will spawn where it was placed in map and won't drop to the floor.
-------- NOTES --------
The amount of time it takes for an item in the team to respawn is determined by the "wait" value of the item that was picked up previously. So if one of the items in the team has it's "wait" key set to -1 (never respawn), the random respawning cycle of the teamed items will stop after that item is picked up.
When the random key is set, its value is used to calculate a minimum and a maximum delay. The final time delay will be a random value anywhere between the minimum and maximum values: (min delay = wait - random) (max delay = wait + random).
-------- MODEL FOR RADIANT ONLY - DO NOT SET THIS AS A KEY --------
Green Armor Shard - 5 points. All armor can be cumulated up to a maximum of 200 points and slowly wears out to 100 points.
-------- KEYS --------
wait : time in seconds before item respawns after being picked up (default 25, -1 = never respawn).
random : random time variance in seconds added or subtracted from "wait" delay (default 0 - see Notes).
team : set this to team items. Teamed items will respawn randomly after team master is picked up (see Notes).
target : picking up the item will trigger the entity this points to.
targetname : a target_give entity can point to this for respawn freebies.
notfree : when set to 1, entity will not spawn in "Free for all" and "Tournament" modes.
notteam : when set to 1, entity will not spawn in "Teamplay" and "CTF" modes.
notsingle : when set to 1, entity will not spawn in Single Player mode (bot play mode).
notbot : used to make an item invisible for bot attraction.
-------- SPAWNFLAGS --------
SUSPENDED : item will spawn where it was placed in map and won't drop to the floor.
-------- NOTES --------
The amount of time it takes for an item in the team to respawn is determined by the "wait" value of the item that was picked up previously. So if one of the items in the team has it's "wait" key set to -1 (never respawn), the random respawning cycle of the teamed items will stop after that item is picked up.
When the random key is set, its value is used to calculate a minimum and a maximum delay. The final time delay will be a random value anywhere between the minimum and maximum values: (min delay = wait - random) (max delay = wait + random).
-------- MODEL FOR RADIANT ONLY - DO NOT SET THIS AS A KEY --------
Game Function: An invisible entity which attracts a bot to it. Use to move bots to parts of a map that might otherwise not be used (NEW ENTITY).
-------- KEYS --------
weight: non-zero floating point value, most often in the range 0 to 400. (Higher values are allowed but keep in mind that the bot should also be attracted to normal items. Don't make the weight value too high.
notfree : when set to 1, entity will not spawn in "Free for all" and "Tournament" modes.
notteam : when set to 1, entity will not spawn in "Teamplay" and "CTF" modes.
notsingle : when set to 1, entity will not spawn in Single Player mode (bot play mode).
-------- SPAWNFLAGS --------
SUSPENDED : item will spawn where it was placed in map and won't drop to the floor.
-------- NOTES --------
The item_botroam entity can be used when a bot does not roam the whole level or prefers to go to only specific areas. This (invisible) item can be placed in a map just like regular items. Nobody can actually pick up the item it's only used to attract bots to certain places of the map. The value is the weight of the roam_item is relative to the weight assigned other items in the map (each bot has its own weights). The bot character specific item weights are stored with the bot characters AI files ("botname"_i.c for items and "botname"_w.c for weapons) in the botfiles/bots/ sub-folder in the .pk3 file.*/
Battle Suit power-up - Gives protection against slime, lava and weapon splash damage. Lasts 30 seconds.
-------- KEYS --------
wait : time in seconds before item respawns after being picked up (default 120, -1 = never respawn).
random : random time variance in seconds added or subtracted from "wait" delay (default 0 - see Notes).
count : time in seconds power-up will last when picked up (default 30).
team : set this to team items. Teamed items will respawn randomly after team master is picked up (see Notes).
target : picking up the item will trigger the entity this points to.
targetname : a target_give entity can point to this for respawn freebies.
notfree : when set to 1, entity will not spawn in "Free for all" and "Tournament" modes.
notteam : when set to 1, entity will not spawn in "Teamplay" and "CTF" modes.
notsingle : when set to 1, entity will not spawn in Single Player mode (bot play mode).
notbot : used to make an item invisible for bot attraction.
-------- SPAWNFLAGS --------
SUSPENDED : item will spawn where it was placed in map and won't drop to the floor.
-------- NOTES --------
The amount of time it takes for an item in the team to respawn is determined by the "wait" value of the item that was picked up previously. So if one of the items in the team has it's "wait" key set to -1 (never respawn), the random respawning cycle of the teamed items will stop after that item is picked up.
When the random key is set, its value is used to calculate a minimum and a maximum delay. The final time delay will be a random value anywhere between the minimum and maximum values: (min delay = wait - random) (max delay = wait + random).
-------- MODEL FOR RADIANT ONLY - DO NOT SET THIS AS A KEY --------
wait : time in seconds before item respawns after being picked up (default 120, -1 = never respawn).
random : random time variance in seconds added or subtracted from "wait" delay (default 0 - see Notes).
count : time in seconds power-up will last when picked up (default 60).
team : set this to team items. Teamed items will respawn randomly after team master is picked up (see Notes).
target : picking up the item will trigger the entity this points to.
targetname : a target_give entity can point to this for respawn freebies.
notfree : when set to 1, entity will not spawn in "Free for all" and "Tournament" modes.
notteam : when set to 1, entity will not spawn in "Teamplay" and "CTF" modes.
notsingle : when set to 1, entity will not spawn in Single Player mode (bot play mode).
notbot : used to make an item invisible for bot attraction.
-------- SPAWNFLAGS --------
SUSPENDED : item will spawn where it was placed in map and won't drop to the floor.
-------- NOTES --------
The amount of time it takes for an item in the team to respawn is determined by the "wait" value of the item that was picked up previously. So if one of the items in the team has it's "wait" key set to -1 (never respawn), the random respawning cycle of the teamed items will stop after that item is picked up.
When the random key is set, its value is used to calculate a minimum and a maximum delay. The final time delay will be a random value anywhere between the minimum and maximum values: (min delay = wait - random) (max delay = wait + random).
-------- MODEL FOR RADIANT ONLY - DO NOT SET THIS AS A KEY --------
Speed power-up. Makes player run at double speed for 30 seconds.
-------- KEYS --------
wait : time in seconds before item respawns after being picked up (default 120, -1 = never respawn).
random : random time variance in seconds added or subtracted from "wait" delay (default 0 - see Notes).
count : time in seconds power-up will last when picked up (default 30).
team : set this to team items. Teamed items will respawn randomly after team master is picked up (see Notes).
target : picking up the item will trigger the entity this points to.
targetname : a target_give entity can point to this for respawn freebies.
notfree : when set to 1, entity will not spawn in "Free for all" and "Tournament" modes.
notteam : when set to 1, entity will not spawn in "Teamplay" and "CTF" modes.
notsingle : when set to 1, entity will not spawn in Single Player mode (bot play mode).
notbot : used to make an item invisible for bot attraction.
-------- SPAWNFLAGS --------
SUSPENDED : item will spawn where it was placed in map and won't drop to the floor.
-------- NOTES --------
The amount of time it takes for an item in the team to respawn is determined by the "wait" value of the item that was picked up previously. So if one of the items in the team has it's "wait" key set to -1 (never respawn), the random respawning cycle of the teamed items will stop after that item is picked up.
When the random key is set, its value is used to calculate a minimum and a maximum delay. The final time delay will be a random value anywhere between the minimum and maximum values: (min delay = wait - random) (max delay = wait + random).
-------- MODEL FOR RADIANT ONLY - DO NOT SET THIS AS A KEY --------
Yellow cross bubble - 25 Health. Cannot be picked up over 100 health.
-------- KEYS --------
wait : time in seconds before item respawns after being picked up (default 35, -1 = never respawn).
random : random time variance in seconds added or subtracted from "wait" delay (default 0 - see Notes).
count: sets the amount of health points given to the player when item is picked up (default 25).
team : set this to team items. Teamed items will respawn randomly after team master is picked up (see Notes).
target : picking up the item will trigger the entity this points to.
notfree : when set to 1, entity will not spawn in "Free for all" and "Tournament" modes.
notteam : when set to 1, entity will not spawn in "Teamplay" and "CTF" modes.
notsingle : when set to 1, entity will not spawn in Single Player mode (bot play mode).
notbot : used to make an item invisible for bot attraction.
-------- SPAWNFLAGS --------
SUSPENDED : item will spawn where it was placed in map and won't drop to the floor.
-------- NOTES --------
The amount of time it takes for an item in the team to respawn is determined by the "wait" value of the item that was picked up previously. So if one of the items in the team has it's "wait" key set to -1 (never respawn), the random respawning cycle of the teamed items will stop after that item is picked up.
When the random key is set, its value is used to calculate a minimum and a maximum delay. The final time delay will be a random value anywhere between the minimum and maximum values: (min delay = wait - random) (max delay = wait + random).
-------- MODEL FOR RADIANT ONLY - DO NOT SET THIS AS A KEY --------
Gold cross bubble - 50 Health. Cannot be picked up over 100 health.
-------- KEYS --------
wait : time in seconds before item respawns after being picked up (default 35, -1 = never respawn).
random : random time variance in seconds added or subtracted from "wait" delay (default 0 - see Notes).
count: sets the amount of health points given to the player when item is picked up (default 50).
team : set this to team items. Teamed items will respawn randomly after team master is picked up (see Notes).
target : picking up the item will trigger the entity this points to.
notfree : when set to 1, entity will not spawn in "Free for all" and "Tournament" modes.
notteam : when set to 1, entity will not spawn in "Teamplay" and "CTF" modes.
notsingle : when set to 1, entity will not spawn in Single Player mode (bot play mode).
notbot : used to make an item invisible for bot attraction.
-------- SPAWNFLAGS --------
SUSPENDED : item will spawn where it was placed in map and won't drop to the floor.
-------- NOTES --------
The amount of time it takes for an item in the team to respawn is determined by the "wait" value of the item that was picked up previously. So if one of the items in the team has it's "wait" key set to -1 (never respawn), the random respawning cycle of the teamed items will stop after that item is picked up.
When the random key is set, its value is used to calculate a minimum and a maximum delay. The final time delay will be a random value anywhere between the minimum and maximum values: (min delay = wait - random) (max delay = wait + random).
-------- MODEL FOR RADIANT ONLY - DO NOT SET THIS AS A KEY --------
Blue M bubble - 100 Health. Adds 100 health points to current health up to a maximum of 200.
-------- KEYS --------
wait : time in seconds before item respawns after being picked up (default 40, -1 = never respawn).
random : random time variance in seconds added or subtracted from "wait" delay (default 0 - see Notes).
count: sets the amount of health points given to the player when item is picked up (default 100).
team : set this to team items. Teamed items will respawn randomly after team master is picked up (see Notes).
target : picking up the item will trigger the entity this points to.
targetname : a target_give entity can point to this for respawn freebies.
notfree : when set to 1, entity will not spawn in "Free for all" and "Tournament" modes.
notteam : when set to 1, entity will not spawn in "Teamplay" and "CTF" modes.
notsingle : when set to 1, entity will not spawn in Single Player mode (bot play mode).
notbot : used to make an item invisible for bot attraction.
-------- SPAWNFLAGS --------
SUSPENDED : item will spawn where it was placed in map and won't drop to the floor.
-------- NOTES --------
The amount of time it takes for an item in the team to respawn is determined by the "wait" value of the item that was picked up previously. So if one of the items in the team has it's "wait" key set to -1 (never respawn), the random respawning cycle of the teamed items will stop after that item is picked up.
When the random key is set, its value is used to calculate a minimum and a maximum delay. The final time delay will be a random value anywhere between the minimum and maximum values: (min delay = wait - random) (max delay = wait + random).
-------- MODEL FOR RADIANT ONLY - DO NOT SET THIS AS A KEY --------
Green cross bubble - 5 Health. Can be picked up over 100 health but slowly wears out to 100 afterwards.
-------- KEYS --------
wait : time in seconds before item respawns after being picked up (default 35, -1 = never respawn).
random : random time variance in seconds added or subtracted from "wait" delay (default 0 - see Notes).
count: sets the amount of health points given to the player when item is picked up (default 5).
team : set this to team items. Teamed items will respawn randomly after team master is picked up (see Notes).
target : picking up the item will trigger the entity this points to.
targetname : a target_give entity can point to this for respawn freebies.
notfree : when set to 1, entity will not spawn in "Free for all" and "Tournament" modes.
notteam : when set to 1, entity will not spawn in "Teamplay" and "CTF" modes.
notsingle : when set to 1, entity will not spawn in Single Player mode (bot play mode).
notbot : used to make an item invisible for bot attraction.
-------- SPAWNFLAGS --------
SUSPENDED : item will spawn where it was placed in map and won't drop to the floor.
-------- NOTES --------
The amount of time it takes for an item in the team to respawn is determined by the "wait" value of the item that was picked up previously. So if one of the items in the team has it's "wait" key set to -1 (never respawn), the random respawning cycle of the teamed items will stop after that item is picked up.
When the random key is set, its value is used to calculate a minimum and a maximum delay. The final time delay will be a random value anywhere between the minimum and maximum values: (min delay = wait - random) (max delay = wait + random).
-------- MODEL FOR RADIANT ONLY - DO NOT SET THIS AS A KEY --------
wait : time in seconds before item respawns after being picked up (default 120, -1 = never respawn).
random : random time variance in seconds added or subtracted from "wait" delay (default 0 - see Notes).
count : time in seconds power-up will last when picked up (default 30).
team : set this to team items. Teamed items will respawn randomly after team master is picked up (see Notes).
target : picking up the item will trigger the entity this points to.
targetname : a target_give entity can point to this for respawn freebies.
notfree : when set to 1, entity will not spawn in "Free for all" and "Tournament" modes.
notteam : when set to 1, entity will not spawn in "Teamplay" and "CTF" modes.
notsingle : when set to 1, entity will not spawn in Single Player mode (bot play mode).
notbot : used to make an item invisible for bot attraction.
-------- SPAWNFLAGS --------
SUSPENDED : item will spawn where it was placed in map and won't drop to the floor.
-------- NOTES --------
The amount of time it takes for an item in the team to respawn is determined by the "wait" value of the item that was picked up previously. So if one of the items in the team has it's "wait" key set to -1 (never respawn), the random respawning cycle of the teamed items will stop after that item is picked up.
When the random key is set, its value is used to calculate a minimum and a maximum delay. The final time delay will be a random value anywhere between the minimum and maximum values: (min delay = wait - random) (max delay = wait + random).
-------- MODEL FOR RADIANT ONLY - DO NOT SET THIS AS A KEY --------
wait : time in seconds before item respawns after being picked up (default 120, -1 = never respawn).
random : random time variance in seconds added or subtracted from "wait" delay (default 0 - see Notes).
count : time in seconds power-up will last when picked up (default 30).
team : set this to team items. Teamed items will respawn randomly after team master is picked up (see Notes).
target : picking up the item will trigger the entity this points to.
targetname : a target_give entity can point to this for respawn freebies.
notfree : when set to 1, entity will not spawn in "Free for all" and "Tournament" modes.
notteam : when set to 1, entity will not spawn in "Teamplay" and "CTF" modes.
notsingle : when set to 1, entity will not spawn in Single Player mode (bot play mode).
notbot : used to make an item invisible for bot attraction.
-------- SPAWNFLAGS --------
SUSPENDED : item will spawn where it was placed in map and won't drop to the floor.
-------- NOTES --------
The amount of time it takes for an item in the team to respawn is determined by the "wait" value of the item that was picked up previously. So if one of the items in the team has it's "wait" key set to -1 (never respawn), the random respawning cycle of the teamed items will stop after that item is picked up.
When the random key is set, its value is used to calculate a minimum and a maximum delay. The final time delay will be a random value anywhere between the minimum and maximum values: (min delay = wait - random) (max delay = wait + random).
Health Regeneration power-up. This will boost your current health by 5 points every second for a period of up to 30 seconds or up to 200 points whichever comes first. Afterwards, any health points over 100 slowly wears out to 100.
-------- KEYS --------
wait : time in seconds before item respawns after being picked up (default 120, -1 = never respawn).
random : random time variance in seconds added or subtracted from "wait" delay (default 0 - see Notes).
count : time in seconds power-up will last when picked up (default 30).
team : set this to team items. Teamed items will respawn randomly after team master is picked up (see Notes).
target : picking up the item will trigger the entity this points to.
targetname : a target_give entity can point to this for respawn freebies.
notfree : when set to 1, entity will not spawn in "Free for all" and "Tournament" modes.
notteam : when set to 1, entity will not spawn in "Teamplay" and "CTF" modes.
notsingle : when set to 1, entity will not spawn in Single Player mode (bot play mode).
notbot : used to make an item invisible for bot attraction.
-------- SPAWNFLAGS --------
SUSPENDED : item will spawn where it was placed in map and won't drop to the floor.
-------- NOTES --------
The amount of time it takes for an item in the team to respawn is determined by the "wait" value of the item that was picked up previously. So if one of the items in the team has it's "wait" key set to -1 (never respawn), the random respawning cycle of the teamed items will stop after that item is picked up.
When the random key is set, its value is used to calculate a minimum and a maximum delay. The final time delay will be a random value anywhere between the minimum and maximum values: (min delay = wait - random) (max delay = wait + random).
-------- MODEL FOR RADIANT ONLY - DO NOT SET THIS AS A KEY --------
_color : weighted RGB value of light color (default white - 1.0 1.0 1.0).
Linear checkbox gives linear falloff instead of inverse square
Lights pointed at a target will be spotlights.
radius: overrides the default 64 unit radius of a spotlight at the target point.
-------- VLIGHT KEYS --------
atten_distscale: falloff for light ents. .25 will give you 4x the falloff distance, .5 will give twice the distance, etc.
atten_anglescale: angle falloff
-------- SPAWNFLAGS --------
LDAT_LINEAR, LDAT_NOSCALE, LAAT_QUADRATIC, LAAT_DOUBLE_QUADRATIC: Falloff settings. Note: Last three supported only with q3map -vlight. Also, q3map -light does not support linear falloff on spotlights.*/
Portal camera. This camera is used to project its view onto a portal surface in the level through the intermediary of a misc_portal_surface entity. Use the "angles" key or target a target_position or info_notnull entity to set the camera's pointing direction.
-------- KEYS --------
angles: this sets the pitch and yaw aiming angles of the portal camera (default 0 0). Use "roll" key to set roll angle.
target : point this to a target_position entity to set the camera's pointing direction.
targetname : a misc_portal_surface portal surface indicator must point to this.
roll: roll angle of camera. A value of 0 is upside down and 180 is the same as the player's view.
notfree : when set to 1, entity will not spawn in "Free for all" and "Tournament" modes.
notteam : when set to 1, entity will not spawn in "Teamplay" and "CTF" modes.
notsingle : when set to 1, entity will not spawn in Single Player mode (bot play mode).
-------- SPAWNFLAGS --------
SLOWROTATE : makes the portal camera rotate slowly along the roll axis.
FASTROTATE : makes the portal camera rotate faster along the roll axis.
-------- NOTES --------
Both the setting "angles" key or "targeting a target_position" methods can be used to aim the camera. However, the target_position method is simpler. In both cases, the "roll" key must be used to set the roll angle. If either the SLOWROTATE or FASTROTATE spawnflag is set, then the "roll" value is irrelevant.*/
Portal surface indicator. This will "lock on" the brush face closest to it and identify as a portal. The view displayed on the portal surface is the view of the misc_portal_camera that this entity targets. Also used for mirrors (see Notes).
-------- KEYS --------
target : point this to a misc_portal_camera that "sees" the view you want to display on the portal.
notfree : when set to 1, entity will not spawn in "Free for all" and "Tournament" modes.
notteam : when set to 1, entity will not spawn in "Teamplay" and "CTF" modes.
notsingle : when set to 1, entity will not spawn in Single Player mode (bot play mode).
-------- NOTES --------
The entity must be no farther than 64 units away from the portal surface to lock onto it. To make a mirror, apply the common/mirror shader to the surface, place this entity near it but don't target a misc_portal_camera.*/
This will shoot a grenade each time it's triggered. Aiming is done by setting the "angles" key or by targeting an info_notnull or target_position entity.
-------- KEYS --------
angles: this sets the pitch and yaw aiming angles of shooter (default 0 0). The roll angle does not apply.
targetname : activating trigger points to this.
target : this points to a target_position entity for aiming the grenades.
random : random aiming variance in degrees from the straight line to the targeted entity (default 0 - see Notes).
notfree : when set to 1, entity will not spawn in "Free for all" and "Tournament" modes.
notteam : when set to 1, entity will not spawn in "Teamplay" and "CTF" modes.
notsingle : when set to 1, entity will not spawn in Single Player mode (bot play mode).
-------- NOTES --------
When the random key is set, its value is used to calculate a maximum angle deviation from the normal trajectory formed by a straight line between the shooter and the aiming entity it targets. The final trajectory will be a random value anywhere between no deviation at all (0) to maximum deviation (value of the random key).
Both the setting "angles" key or "targeting a target_position" methods can be used to aim the shooter. However, the target_position method is simpler.*/
This will shoot a plasma ball each time it's triggered. Aiming is done by setting the "angles" key or by targeting an info_notnull or target_position entity.
-------- KEYS --------
angles: this sets the pitch and yaw aiming angles of shooter (default 0 0). The roll angle does not apply.
targetname : activating trigger points to this.
target : this points to a target_position entity for aiming the plasma balls.
random : random aiming variance in degrees from the straight line to the targeted entity (default 0 - see Notes).
notfree : when set to 1, entity will not spawn in "Free for all" and "Tournament" modes.
notteam : when set to 1, entity will not spawn in "Teamplay" and "CTF" modes.
notsingle : when set to 1, entity will not spawn in Single Player mode (bot play mode).
-------- NOTES --------
When the random key is set, its value is used to calculate a maximum angle deviation from the normal trajectory formed by a straight line between the shooter and the aiming entity it targets. The final trajectory will be a random value anywhere between no deviation at all (0) to maximum deviation (value of the random key).
Both the setting "angles" key or "targeting a target_position" methods can be used to aim the shooter. However, the target_position method is simpler.*/
This will shoot a rocket each time it's triggered. Aiming is done by setting the "angles" key or by targeting an info_notnull or target_position entity.
-------- KEYS --------
angles: this sets the pitch and yaw aiming angles of shooter (default 0 0). The roll angle does not apply.
targetname : activating trigger points to this.
target : this points to a target_position entity for aiming the rockets.
random : random aiming variance in degrees from the straight line to the targeted entity (default 0 - see Notes).
notfree : when set to 1, entity will not spawn in "Free for all" and "Tournament" modes.
notteam : when set to 1, entity will not spawn in "Teamplay" and "CTF" modes.
notsingle : when set to 1, entity will not spawn in Single Player mode (bot play mode).
-------- NOTES --------
When the random key is set, its value is used to calculate a maximum angle deviation from the normal trajectory formed by a straight line between the shooter and the aiming entity it targets. The final trajectory will be a random value anywhere between no deviation at all (0) to maximum deviation (value of the random key).
Both the setting "angles" key or "targeting a target_position" methods can be used to aim the shooter. However, the target_position method is simpler.*/
Time delay trigger intermediary. Like a target_relay, this can only be fired by other triggers which will cause it in turn to fire its own targets.
-------- KEYS --------
targetname : activating trigger points to this.
target : this points to entities to activate when this entity is triggered.
wait : delay in seconds from when this gets triggered to when it fires its own targets (default approx. 1).
delay : same as wait? replaces it? WTF?...I'm confused now.
random : random time variance in seconds added or subtracted from "wait" delay (default 0 - see Notes).
notfree : when set to 1, entity will not spawn in "Free for all" and "Tournament" modes.
notteam : when set to 1, entity will not spawn in "Teamplay" and "CTF" modes.
notsingle : when set to 1, entity will not spawn in Single Player mode (bot play mode).
-------- NOTES --------
When the random key is set, its value is used to calculate a minimum and a maximum delay. The final time delay will be a random value anywhere between the minimum and maximum values: (min delay = wait - random) (max delay = wait + random).*/
This is used to give ammo, weapons, health or items to the player who activates it.
-------- KEYS --------
target : this points to the item(s) to give when activated.
targetname : activating trigger or spawn entity points to this.
notfree : when set to 1, entity will not spawn in "Free for all" and "Tournament" modes.
notteam : when set to 1, entity will not spawn in "Teamplay" and "CTF" modes.
notsingle : when set to 1, entity will not spawn in Single Player mode (bot play mode).
-------- NOTES --------
There are 2 ways to use this entity.
a) automatically give items to players when they spawn in the game: make a spawn location entity like info_player_deathmatch or CTF respawn points target this entity, then make it target the item(s) to give to the player upon respawn.
b) give items to players during the game: make a trigger_multiple target this entity, then make it target the item(s) to give to the player when the trigger is touched.*/
Location marker used by bots and players for team orders and team chat in the course of Teamplay games. The closest target_location in sight is used for the location. If none is in sight, the closest in distance is used.
-------- KEYS --------
message : name of the location (text string). Displayed in parentheses in front of all team chat and order messages.
count : color of the location text displayed in parentheses during team chat. Set to 0-7 for color.
0 : white (default)
1 : red
2 : green
3 : yellow
4 : blue
5 : cyan
6 : magenta
7 : white
notfree : when set to 1, entity will not spawn in "Free for all" and "Tournament" modes.
notteam : when set to 1, entity will not spawn in "Teamplay" and "CTF" modes.
notsingle : when set to 1, entity will not spawn in Single Player mode (bot play mode).*/
This can be used to create jump pads and launch ramps. The direction of push can be set by the "angles" key or pointing to a target_position or info_notnull entity. Unlike trigger_push, this is NOT client side predicted and must be activated by a trigger.
-------- KEYS --------
angles: this sets the pitch and yaw aiming angles of push entity (default 0 0). The roll angle does not apply.
speed : speed of push (default 1000). Has no effect if entity targets an aiming entity.
targetname : the activating trigger points to this. Push originates from the location of the trigger.
target : this points to the aiming entity to which the player will jump.
notfree : when set to 1, entity will not spawn in "Free for all" and "Tournament" modes.
notteam : when set to 1, entity will not spawn in "Teamplay" and "CTF" modes.
notsingle : when set to 1, entity will not spawn in Single Player mode (bot play mode).
-------- SPAWNFLAGS --------
BOUNCEPAD : if set, trigger will play bounce noise instead of beep noise when activated (recommended).
-------- NOTES --------
To make a jump pad or launch ramp, create a trigger_multiple where the jump must originate. Place the target_push directly above the trigger_multiple and place the target_position entity at the highest point of the jump. Target the trigger_multiple to the target_push and target the target_push to the target_position/info_notnull (or set the target_push's "angles" key). Note that the "angle" key also works.*/
This takes away any and all item_* type powerups from player except health and armor (holdable_* items are not taken away either). Must be activated by a button or trigger_multiple entity. The player that activates the trigger will lose any powerup(s) currently in his possession.
-------- KEYS --------
targetname : activating trigger points to this.
notfree : when set to 1, entity will not spawn in "Free for all" and "Tournament" modes.
notteam : when set to 1, entity will not spawn in "Teamplay" and "CTF" modes.
notsingle : when set to 1, entity will not spawn in Single Player mode (bot play mode).*/
This is used to automatically give frag points to the player who activates this. A spawn location entity like info_player_* or CTF respawn points can target this entity to give points to the player when he spawns in the game. Or a trigger can also be used to activate this. The activator of the trigger will get the points.
-------- KEYS --------
targetname : ativating entity points to this.
count: number of frag points to give to player (default 1).
notfree : when set to 1, entity will not spawn in "Free for all" and "Tournament" modes.
notteam : when set to 1, entity will not spawn in "Teamplay" and "CTF" modes.
notsingle : when set to 1, entity will not spawn in Single Player mode (bot play mode).*/
Sound generating entity that plays .wav files. Normal non-looping sounds play each time the target_speaker is triggered. Looping sounds can be set to play by themselves (no activating trigger) or be toggled on/off by a trigger.
-------- KEYS --------
noise : path/name of .wav file to play (eg. sound/world/growl1.wav - see Notes).
wait : delay in seconds between each time the sound is played ("random" key must be set - see Notes).
random : random time variance in seconds added or subtracted from "wait" delay ("wait" key must be set - see Notes).
targetname : the activating button or trigger points to this.
notfree : when set to 1, entity will not spawn in "Free for all" and "Tournament" modes.
notteam : when set to 1, entity will not spawn in "Teamplay" and "CTF" modes.
notsingle : when set to 1, entity will not spawn in Single Player mode (bot play mode).
-------- SPAWNFLAGS --------
LOOPED_ON : sound will loop and initially start on in level (will toggle on/off when triggered).
LOOPED_OFF : sound will loop and initially start off in level (will toggle on/off when triggered).
GLOBAL : sound will play full volume throughout the level.
ACTIVATOR : sound will play only for the player that activated the target.
-------- NOTES --------
The path portion value of the "noise" key can be replaced by the implicit folder character "*" for triggered sounds that belong to a particular player model. For example, if you want to create a "bottomless pit" in which the player screams and dies when he falls into, you would place a trigger_multiple over the floor of the pit and target a target_speaker with it. Then, you would set the "noise" key to "*falling1.wav". The * character means the current player model's sound folder. So if your current player model is Visor, * = sound/player/visor, if your current player model is Sarge, * = sound/player/sarge, etc. This cool feature provides an excellent way to create "player-specific" triggered sounds in your levels.
The combination of the "wait" and "random" keys can be used to play non-looping sounds without requiring an activating trigger but both keys must be used together. The value of the "random" key is used to calculate a minimum and a maximum delay. The final time delay will be a random value anywhere between the minimum and maximum values: (min delay = wait - random) (max delay = wait + random).*/
Activating this will teleport players to the location of the targeted misc_teleporter_dest entity. Unlike trigger_teleport, this entity must be activated by a trigger and does NOT allow client prediction of events.
-------- KEYS --------
targetname : activating trigger points to this.
target : this must point to a misc_teleporter_dest entity.
notfree : when set to 1, entity will not spawn in "Free for all" and "Tournament" modes.
notteam : when set to 1, entity will not spawn in "Teamplay" and "CTF" modes.
notsingle : when set to 1, entity will not spawn in Single Player mode (bot play mode).*/
Any player that touches this will be hurt by "dmg" points of damage once per server frame (very fast). A sizzling sound is also played while the player is being hurt.
-------- KEYS --------
dmg : number of points of damage inflicted to player per server frame (default 5 - integer values only).
notfree : when set to 1, entity will not spawn in "Free for all" and "Tournament" modes.
notteam : when set to 1, entity will not spawn in "Teamplay" and "CTF" modes.
notsingle : when set to 1, entity will not spawn in Single Player mode (bot play mode).
-------- SPAWNFLAGS --------
SILENT : supresses the sizzling sound while player is being hurt.
NO_PROTECTION : player will be hurt regardless of protection (see Notes).
SLOW : changes the damage rate to once per second.
-------- NOTES --------
The invulnerability power-up (item_enviro) does not protect the player from damage caused by this entity regardless of whether the NO_PROTECTION spawnflag is set or not. Triggering a trigger_hurt will have no effect if the TOGGLE spawnflag is not set. A trigger_hurt always starts on in the game.*/
Variable size repeatable trigger. It will fire the entities it targets when touched by player. Can be made to operate like a trigger_once entity by setting the "wait" key to -1. It can also be activated by another trigger that targets it.
-------- KEYS --------
target : this points to the entity to activate.
targetname : activating trigger points to this.
wait : time in seconds until trigger becomes re-triggerable after it's been touched (default 0.2, -1 = trigger once).
random : random time variance in seconds added or subtracted from "wait" delay (default 0 - see Notes).
notfree : when set to 1, entity will not spawn in "Free for all" and "Tournament" modes.
notteam : when set to 1, entity will not spawn in "Teamplay" and "CTF" modes.
notsingle : when set to 1, entity will not spawn in Single Player mode (bot play mode).
-------- NOTES --------
When the random key is set, its value is used to calculate a minimum and a maximum delay. The final time delay will be a random value anywhere between the minimum and maximum values: (min delay = wait - random) (max delay = wait + random).*/
This is used to create jump pads and launch ramps. It MUST point to a target_position or info_notnull entity to work. Unlike target_push, this is client side predicted.
-------- KEYS --------
target : this points to the target_position to which the player will jump.
notfree : when set to 1, entity will not spawn in "Free for all" and "Tournament" modes.
notteam : when set to 1, entity will not spawn in "Teamplay" and "CTF" modes.
notsingle : when set to 1, entity will not spawn in Single Player mode (bot play mode).
-------- NOTES --------
To make a jump pad or launch ramp, place the target_position/info_notnull entity at the highest point of the jump and target it with this entity.*/
wait : time in seconds before item respawns after being picked up (default 5, -1 = never respawn).
random : random time variance in seconds added or subtracted from "wait" delay (default 0 - see Notes).
count: sets the amount of ammo given to the player when weapon is picked up (default 20).
team : set this to team items. Teamed items will respawn randomly after team master is picked up (see Notes).
target : picking up the item will trigger the entity this points to.
targetname : a target_give entity can point to this for respawn freebies.
notfree : when set to 1, entity will not spawn in "Free for all" and "Tournament" modes.
notteam : when set to 1, entity will not spawn in "Teamplay" and "CTF" modes.
notsingle : when set to 1, entity will not spawn in Single Player mode (bot play mode).
notbot : used to make an item invisible for bot attraction.
-------- SPAWNFLAGS --------
SUSPENDED : item will spawn where it was placed in map and won't drop to the floor.
-------- NOTES --------
The amount of time it takes for an item in the team to respawn is determined by the "wait" value of the item that was picked up previously. So if one of the items in the team has it's "wait" key set to -1 (never respawn), the random respawning cycle of the teamed items will stop after that item is picked up.
When the random key is set, its value is used to calculate a minimum and a maximum delay. The final time delay will be a random value anywhere between the minimum and maximum values: (min delay = wait - random) (max delay = wait + random).
-------- MODEL FOR RADIANT ONLY - DO NOT SET THIS AS A KEY --------
wait : time in seconds before item respawns after being picked up (default 5, -1 = never respawn).
random : random time variance in seconds added or subtracted from "wait" delay (default 0 - see Notes).
team : set this to team items. Teamed items will respawn randomly after team master is picked up (see Notes).
target : picking up the item will trigger the entity this points to.
targetname : a target_give entity can point to this for respawn freebies.
notfree : when set to 1, entity will not spawn in "Free for all" and "Tournament" modes.
notteam : when set to 1, entity will not spawn in "Teamplay" and "CTF" modes.
notsingle : when set to 1, entity will not spawn in Single Player mode (bot play mode).
notbot : used to make an item invisible for bot attraction.
-------- SPAWNFLAGS --------
SUSPENDED : item will spawn where it was placed in map and won't drop to the floor.
-------- NOTES --------
The amount of time it takes for an item in the team to respawn is determined by the "wait" value of the item that was picked up previously. So if one of the items in the team has it's "wait" key set to -1 (never respawn), the random respawning cycle of the teamed items will stop after that item is picked up.
When the random key is set, its value is used to calculate a minimum and a maximum delay. The final time delay will be a random value anywhere between the minimum and maximum values: (min delay = wait - random) (max delay = wait + random).
-------- MODEL FOR RADIANT ONLY - DO NOT SET THIS AS A KEY --------
Grappling Hook. Spawns in the game and works but is unskinned.
-------- KEYS --------
wait : time in seconds before item respawns after being picked up (default 5, -1 = never respawn).
random : random time variance in seconds added or subtracted from "wait" delay (default 0 - see Notes).
team : set this to team items. Teamed items will respawn randomly after team master is picked up (see Notes).
target : picking up the item will trigger the entity this points to.
targetname : a target_give entity can point to this for respawn freebies.
notfree : when set to 1, entity will not spawn in "Free for all" and "Tournament" modes.
notteam : when set to 1, entity will not spawn in "Teamplay" and "CTF" modes.
notsingle : when set to 1, entity will not spawn in Single Player mode (bot play mode).
notbot : used to make an item invisible for bot attraction.
-------- SPAWNFLAGS --------
SUSPENDED : item will spawn where it was placed in map and won't drop to the floor.
-------- NOTES --------
The amount of time it takes for an item in the team to respawn is determined by the "wait" value of the item that was picked up previously. So if one of the items in the team has it's "wait" key set to -1 (never respawn), the random respawning cycle of the teamed items will stop after that item is picked up.
When the random key is set, its value is used to calculate a minimum and a maximum delay. The final time delay will be a random value anywhere between the minimum and maximum values: (min delay = wait - random) (max delay = wait + random).
-------- MODEL FOR RADIANT ONLY - DO NOT SET THIS AS A KEY --------
wait : time in seconds before item respawns after being picked up (default 5, -1 = never respawn).
random : random time variance in seconds added or subtracted from "wait" delay (default 0 - see Notes).
count: sets the amount of ammo given to the player when weapon is picked up (default 10).
team : set this to team items. Teamed items will respawn randomly after team master is picked up (see Notes).
target : picking up the item will trigger the entity this points to.
targetname : a target_give entity can point to this for respawn freebies.
notfree : when set to 1, entity will not spawn in "Free for all" and "Tournament" modes.
notteam : when set to 1, entity will not spawn in "Teamplay" and "CTF" modes.
notsingle : when set to 1, entity will not spawn in Single Player mode (bot play mode).
notbot : used to make an item invisible for bot attraction.
-------- SPAWNFLAGS --------
SUSPENDED : item will spawn where it was placed in map and won't drop to the floor.
-------- NOTES --------
The amount of time it takes for an item in the team to respawn is determined by the "wait" value of the item that was picked up previously. So if one of the items in the team has it's "wait" key set to -1 (never respawn), the random respawning cycle of the teamed items will stop after that item is picked up.
When the random key is set, its value is used to calculate a minimum and a maximum delay. The final time delay will be a random value anywhere between the minimum and maximum values: (min delay = wait - random) (max delay = wait + random).
-------- MODEL FOR RADIANT ONLY - DO NOT SET THIS AS A KEY --------
wait : time in seconds before item respawns after being picked up (default 5, -1 = never respawn).
random : random time variance in seconds added or subtracted from "wait" delay (default 0 - see Notes).
count: sets the amount of ammo given to the player when weapon is picked up (default 100).
team : set this to team items. Teamed items will respawn randomly after team master is picked up (see Notes).
target : picking up the item will trigger the entity this points to.
targetname : a target_give entity can point to this for respawn freebies.
notfree : when set to 1, entity will not spawn in "Free for all" and "Tournament" modes.
notteam : when set to 1, entity will not spawn in "Teamplay" and "CTF" modes.
notsingle : when set to 1, entity will not spawn in Single Player mode (bot play mode).
notbot : used to make an item invisible for bot attraction.
-------- SPAWNFLAGS --------
SUSPENDED : item will spawn where it was placed in map and won't drop to the floor.
-------- NOTES --------
The amount of time it takes for an item in the team to respawn is determined by the "wait" value of the item that was picked up previously. So if one of the items in the team has it's "wait" key set to -1 (never respawn), the random respawning cycle of the teamed items will stop after that item is picked up.
When the random key is set, its value is used to calculate a minimum and a maximum delay. The final time delay will be a random value anywhere between the minimum and maximum values: (min delay = wait - random) (max delay = wait + random).
-------- MODEL FOR RADIANT ONLY - DO NOT SET THIS AS A KEY --------
wait : time in seconds before item respawns after being picked up (default 5, -1 = never respawn).
random : random time variance in seconds added or subtracted from "wait" delay (default 0 - see Notes).
count: sets the amount of ammo given to the player when weapon is picked up (default 100).
team : set this to team items. Teamed items will respawn randomly after team master is picked up (see Notes).
target : picking up the item will trigger the entity this points to.
targetname : a target_give entity can point to this for respawn freebies.
notfree : when set to 1, entity will not spawn in "Free for all" and "Tournament" modes.
notteam : when set to 1, entity will not spawn in "Teamplay" and "CTF" modes.
notsingle : when set to 1, entity will not spawn in Single Player mode (bot play mode).
notbot : used to make an item invisible for bot attraction.
-------- SPAWNFLAGS --------
SUSPENDED : item will spawn where it was placed in map and won't drop to the floor.
-------- NOTES --------
The amount of time it takes for an item in the team to respawn is determined by the "wait" value of the item that was picked up previously. So if one of the items in the team has it's "wait" key set to -1 (never respawn), the random respawning cycle of the teamed items will stop after that item is picked up.
When the random key is set, its value is used to calculate a minimum and a maximum delay. The final time delay will be a random value anywhere between the minimum and maximum values: (min delay = wait - random) (max delay = wait + random).
-------- MODEL FOR RADIANT ONLY - DO NOT SET THIS AS A KEY --------
wait : time in seconds before item respawns after being picked up (default 5, -1 = never respawn).
random : random time variance in seconds added or subtracted from "wait" delay (default 0 - see Notes).
count: sets the amount of ammo given to the player when weapon is picked up (default 50).
team : set this to team items. Teamed items will respawn randomly after team master is picked up (see Notes).
target : picking up the item will trigger the entity this points to.
targetname : a target_give entity can point to this for respawn freebies.
notfree : when set to 1, entity will not spawn in "Free for all" and "Tournament" modes.
notteam : when set to 1, entity will not spawn in "Teamplay" and "CTF" modes.
notsingle : when set to 1, entity will not spawn in Single Player mode (bot play mode).
notbot : used to make an item invisible for bot attraction.
-------- SPAWNFLAGS --------
SUSPENDED : item will spawn where it was placed in map and won't drop to the floor.
-------- NOTES --------
The amount of time it takes for an item in the team to respawn is determined by the "wait" value of the item that was picked up previously. So if one of the items in the team has it's "wait" key set to -1 (never respawn), the random respawning cycle of the teamed items will stop after that item is picked up.
When the random key is set, its value is used to calculate a minimum and a maximum delay. The final time delay will be a random value anywhere between the minimum and maximum values: (min delay = wait - random) (max delay = wait + random).
-------- MODEL FOR RADIANT ONLY - DO NOT SET THIS AS A KEY --------
wait : time in seconds before item respawns after being picked up (default 5, -1 = never respawn).
random : random time variance in seconds added or subtracted from "wait" delay (default 0 - see Notes).
count: sets the amount of ammo given to the player when weapon is picked up (default 10).
team : set this to team items. Teamed items will respawn randomly after team master is picked up (see Notes).
target : picking up the item will trigger the entity this points to.
targetname : a target_give entity can point to this for respawn freebies.
notfree : when set to 1, entity will not spawn in "Free for all" and "Tournament" modes.
notteam : when set to 1, entity will not spawn in "Teamplay" and "CTF" modes.
notsingle : when set to 1, entity will not spawn in Single Player mode (bot play mode).
notbot : used to make an item invisible for bot attraction.
-------- SPAWNFLAGS --------
SUSPENDED : item will spawn where it was placed in map and won't drop to the floor.
-------- NOTES --------
The amount of time it takes for an item in the team to respawn is determined by the "wait" value of the item that was picked up previously. So if one of the items in the team has it's "wait" key set to -1 (never respawn), the random respawning cycle of the teamed items will stop after that item is picked up.
When the random key is set, its value is used to calculate a minimum and a maximum delay. The final time delay will be a random value anywhere between the minimum and maximum values: (min delay = wait - random) (max delay = wait + random).
-------- MODEL FOR RADIANT ONLY - DO NOT SET THIS AS A KEY --------
wait : time in seconds before item respawns after being picked up (default 5, -1 = never respawn).
random : random time variance in seconds added or subtracted from "wait" delay (default 0 - see Notes).
count: sets the amount of ammo given to the player when weapon is picked up (default 10).
team : set this to team items. Teamed items will respawn randomly after team master is picked up (see Notes).
target : picking up the item will trigger the entity this points to.
targetname : a target_give entity can point to this for respawn freebies.
notfree : when set to 1, entity will not spawn in "Free for all" and "Tournament" modes.
notteam : when set to 1, entity will not spawn in "Teamplay" and "CTF" modes.
notsingle : when set to 1, entity will not spawn in Single Player mode (bot play mode).
notbot : used to make an item invisible for bot attraction.
-------- SPAWNFLAGS --------
SUSPENDED : item will spawn where it was placed in map and won't drop to the floor.
-------- NOTES --------
The amount of time it takes for an item in the team to respawn is determined by the "wait" value of the item that was picked up previously. So if one of the items in the team has it's "wait" key set to -1 (never respawn), the random respawning cycle of the teamed items will stop after that item is picked up.
When the random key is set, its value is used to calculate a minimum and a maximum delay. The final time delay will be a random value anywhere between the minimum and maximum values: (min delay = wait - random) (max delay = wait + random).
-------- MODEL FOR RADIANT ONLY - DO NOT SET THIS AS A KEY --------
wait : time in seconds before item respawns after being picked up (default 5, -1 = never respawn).
random : random time variance in seconds added or subtracted from "wait" delay (default 0 - see Notes).
count: sets the amount of ammo given to the player when weapon is picked up (default 10).
team : set this to team items. Teamed items will respawn randomly after team master is picked up (see Notes).
target : picking up the item will trigger the entity this points to.
targetname : a target_give entity can point to this for respawn freebies.
notfree : when set to 1, entity will not spawn in "Free for all" and "Tournament" modes.
notteam : when set to 1, entity will not spawn in "Teamplay" and "CTF" modes.
notsingle : when set to 1, entity will not spawn in Single Player mode (bot play mode).
notbot : used to make an item invisible for bot attraction.
-------- SPAWNFLAGS --------
SUSPENDED : item will spawn where it was placed in map and won't drop to the floor.
-------- NOTES --------
The amount of time it takes for an item in the team to respawn is determined by the "wait" value of the item that was picked up previously. So if one of the items in the team has it's "wait" key set to -1 (never respawn), the random respawning cycle of the teamed items will stop after that item is picked up.
When the random key is set, its value is used to calculate a minimum and a maximum delay. The final time delay will be a random value anywhere between the minimum and maximum values: (min delay = wait - random) (max delay = wait + random).
-------- MODEL FOR RADIANT ONLY - DO NOT SET THIS AS A KEY --------
message : text to print at user logon. Used for name of level.
music : path/name of looping .wav file used for level's music (eg. music/sonic5.wav).
ambient : Adds a constant value to overall lighting. Use is not recommended. Ambient light will have a tendency to flatten out variations in light and shade.
_color : RGB value for ambient light color (default is 0 0 0).
gravity : gravity of level (default is normal gravity: 800).
gridsize : granularity of the lightgrid created by q3map. Value is three integers separated by spaces, representing number of units between grid points in X Y Z. Default gridsize value is 128 128 256. Use larger powers of 2 to reduce BSP size and compile time on very large maps.
_blocksize : q3map always splits the BSP tree along the planes X=_blocksize*n and Y=_blocksize*n. Default _blocksize value is 1024. Increase the blocksize using larger powers of 2 to reduce compile times on very large maps with a low structural brush density.*/
wait : time in seconds before item respawns after being picked up (default 5, -1 = never respawn).
random : random time variance in seconds added or subtracted from "wait" delay (default 0 - see Notes).
count: sets the amount of ammo given to the player when weapon is picked up (default 10).
team : set this to team items. Teamed items will respawn randomly after team master is picked up (see Notes).
target : picking up the item will trigger the entity this points to.
targetname : a target_give entity can point to this for respawn freebies.
notfree : when set to 1, entity will not spawn in "Free for all" and "Tournament" modes.
notteam : when set to 1, entity will not spawn in "Teamplay" and "CTF" modes.
notsingle : when set to 1, entity will not spawn in Single Player mode (bot play mode).
notbot : used to make an item invisible for bot attraction.
-------- SPAWNFLAGS --------
SUSPENDED : item will spawn where it was placed in map and won't drop to the floor.
-------- NOTES --------
The amount of time it takes for an item in the team to respawn is determined by the "wait" value of the item that was picked up previously. So if one of the items in the team has it's "wait" key set to -1 (never respawn), the random respawning cycle of the teamed items will stop after that item is picked up.
When the random key is set, its value is used to calculate a minimum and a maximum delay. The final time delay will be a random value anywhere between the minimum and maximum values: (min delay = wait - random) (max delay = wait + random).
-------- MODEL FOR RADIANT ONLY - DO NOT SET THIS AS A KEY --------
Rising platform the player can ride to reach higher places. Plats must always be drawn in the raised position, so they will operate and be lighted correctly but they spawn in the lowered position. The plat will stay in the raised position until the player steps off. There are no proper sounds for this entity, only beep noises. It will spawn in the game and work properly but it sounds silly (see Notes).
-------- KEYS --------
speed : determines how fast the plat moves (default 150).
lip : lip remaining at end of move (default 16). Has no effect if "height" is set.
height : if set, this will determine the total amount of vertical travel of the plat.
dmg : damage to inflict on player when he blocks operation of plat (default 4). Plat will reverse direction when blocked.
targetname : if set, the trigger that points to this will raise the plat each time it fires. The plat raises and comes back down a second later if no player is on it.
light : constantLight radius of .md3 model included with entity. Has no effect on the entity's brushes (default 0).
color : constantLight color of .md3 model included with entity. Has no effect on the entity's brushes (default 1 1 1).
model2 : path/name of model to include (eg: models/mapobjects/pipe/pipe02.md3).
origin : alternate method of setting XYZ origin of .md3 model included with entity (See Notes).
notfree : when set to 1, entity will not spawn in "Free for all" and "Tournament" modes.
notteam : when set to 1, entity will not spawn in "Teamplay" and "CTF" modes.
notsingle : when set to 1, entity will not spawn in Single Player mode (bot play mode).
-------- NOTES --------
By default, the total amount of vertical travel of a platform is implicitly determined by the overall vertical size of the brushes of which it's made minus the lip value. But if the "height" key is used, then the total amount of vertical travel of the plat will be exactly that value regardless of the shape and size of the plat and regardless of the value of the "lip" key. Using the "height" key is the best method for any kind of platforms and the only possible one for thin plats which need to travel vertical distances many times their own thickness. Setting the origin key is simply an alternate method to using an origin brush. When using the model2 key, the origin point of the model will correspond to the origin point defined by either the origin brush or the origin coordinate value.
There is a way to make plats play proper sounds. Just create a sound\movers\plats folder under baseq3 and put 2 sounds named pt1_strt.wav and pt1_end.wav in it. Those can be the renamed sounds from the Q2 plats or renamed copies of the sound\movers\doors sounds you can extract from your pak0.pk3 file or new custom sounds if you're up to it. Thanks to Fragzilla for the tip.*/
When a button is touched by a player, it moves in the direction set by the "angle" key, triggers all its targets, stays pressed by an amount of time set by the "wait" key, then returns to it's original position where it can be operated again.
-------- KEYS --------
angle : determines the direction in which the button will move (up = -1, down = -2).
target : all entities with a matching targetname will be triggered.
speed : speed of button's displacement (default 40).
wait : number of seconds button stays pressed (default 1, -1 = return immediately).
lip : lip remaining at end of move (default 4 units).
health : if set to a non-zero value, the button must be damaged by "health" amount of points to operate.
light : constantLight radius of .md3 model included with entity. Has no effect on the entity's brushes (default 0).
color : constantLight color of .md3 model included with entity. Has no effect on the entity's brushes (default 1 1 1).
model2 : path/name of model to include (eg: models/mapobjects/pipe/pipe02.md3).
origin : alternate method of setting XYZ origin of .md3 model included with entity (See Notes).
notfree : when set to 1, entity will not spawn in "Free for all" and "Tournament" modes.
notteam : when set to 1, entity will not spawn in "Teamplay" and "CTF" modes.
notsingle : when set to 1, entity will not spawn in Single Player mode (bot play mode).
-------- NOTES --------
Setting the origin key is simply an alternate method to using an origin brush. When using the model2 key, the origin point of the model will correspond to the origin point defined by either the origin brush or the origin coordinate value.*/
wait : time in seconds before item respawns after being picked up (default 40, -1 = never respawn).
random : random time variance in seconds added or subtracted from "wait" delay (default 0 - see Notes).
team : set this to team items. Teamed items will respawn randomly after team master is picked up (see Notes).
target : picking up the item will trigger the entity this points to.
targetname : a target_give entity can point to this for respawn freebies.
notfree : when set to 1, entity will not spawn in "Free for all" and "Tournament" modes.
notteam : when set to 1, entity will not spawn in "Teamplay" and "CTF" modes.
notsingle : when set to 1, entity will not spawn in Single Player mode (bot play mode).
notbot : used to make an item invisible for bot attraction.
-------- SPAWNFLAGS --------
SUSPENDED : item will spawn where it was placed in map and won't drop to the floor.
-------- NOTES --------
The amount of time it takes for an item in the team to respawn is determined by the "wait" value of the item that was picked up previously. So if one of the items in the team has it's "wait" key set to -1 (never respawn), the random respawning cycle of the teamed items will stop after that item is picked up.
When the random key is set, its value is used to calculate a minimum and a maximum delay. The final time delay will be a random value anywhere between the minimum and maximum values: (min delay = wait - random) (max delay = wait + random).
-------- MODEL FOR RADIANT ONLY - DO NOT SET THIS AS A KEY --------
wait : time in seconds before item respawns after being picked up (default 40, -1 = never respawn).
random : random time variance in seconds added or subtracted from "wait" delay (default 0 - see Notes).
count: sets the amount of ammo given to the player when picked up (default 5).
target : picking up the item will trigger the entity this points to.
targetname : a target_give entity can point to this for respawn freebies.
notfree : when set to 1, entity will not spawn in "Free for all" and "Tournament" modes.
notteam : when set to 1, entity will not spawn in "Teamplay" and "CTF" modes.
notsingle : when set to 1, entity will not spawn in Single Player mode (bot play mode).
notbot : used to make an item invisible for bot attraction.
-------- SPAWNFLAGS --------
SUSPENDED : item will spawn where it was placed in map and won't drop to the floor.
-------- NOTES --------
The amount of time it takes for an item in the team to respawn is determined by the "wait" value of the item that was picked up previously. So if one of the items in the team has it's "wait" key set to -1 (never respawn), the random respawning cycle of the teamed items will stop after that item is picked up.
When the random key is set, its value is used to calculate a minimum and a maximum delay. The final time delay will be a random value anywhere between the minimum and maximum values: (min delay = wait - random) (max delay = wait + random).
-------- MODEL FOR RADIANT ONLY - DO NOT SET THIS AS A KEY --------
wait : time in seconds before item respawns after being picked up (default 40, -1 = never respawn).
random : random time variance in seconds added or subtracted from "wait" delay (default 0 - see Notes).
target : picking up the item will trigger the entity this points to.
targetname : a target_give entity can point to this for respawn freebies.
notfree : when set to 1, entity will not spawn in "Free for all" and "Tournament" modes.
notteam : when set to 1, entity will not spawn in "Teamplay" and "CTF" modes.
notsingle : when set to 1, entity will not spawn in Single Player mode (bot play mode).
notbot : used to make an item invisible for bot attraction.
-------- SPAWNFLAGS --------
SUSPENDED : item will spawn where it was placed in map and won't drop to the floor.
-------- NOTES --------
The amount of time it takes for an item in the team to respawn is determined by the "wait" value of the item that was picked up previously. So if one of the items in the team has it's "wait" key set to -1 (never respawn), the random respawning cycle of the teamed items will stop after that item is picked up.
When the random key is set, its value is used to calculate a minimum and a maximum delay. The final time delay will be a random value anywhere between the minimum and maximum values: (min delay = wait - random) (max delay = wait + random).
-------- MODEL FOR RADIANT ONLY - DO NOT SET THIS AS A KEY --------
Cells (For Invader Gat and Blaster). Gives the player 30 by default.
-------- KEYS --------
wait : time in seconds before item respawns after being picked up (default 40, -1 = never respawn).
random : random time variance in seconds added or subtracted from "wait" delay (default 0 - see Notes).
count: sets the amount of ammo given to the player when picked up (default 15).
target : picking up the item will trigger the entity this points to.
targetname : a target_give entity can point to this for respawn freebies.
notfree : when set to 1, entity will not spawn in "Free for all" and "Tournament" modes.
notteam : when set to 1, entity will not spawn in "Teamplay" and "CTF" modes.
notsingle : when set to 1, entity will not spawn in Single Player mode (bot play mode).
notbot : used to make an item invisible for bot attraction.
-------- SPAWNFLAGS --------
SUSPENDED : item will spawn where it was placed in map and won't drop to the floor.
-------- NOTES --------
The amount of time it takes for an item in the team to respawn is determined by the "wait" value of the item that was picked up previously. So if one of the items in the team has it's "wait" key set to -1 (never respawn), the random respawning cycle of the teamed items will stop after that item is picked up.
When the random key is set, its value is used to calculate a minimum and a maximum delay. The final time delay will be a random value anywhere between the minimum and maximum values: (min delay = wait - random) (max delay = wait + random).
-------- MODEL FOR RADIANT ONLY - DO NOT SET THIS AS A KEY --------
wait : time in seconds before item respawns after being picked up (default 40, -1 = never respawn).
random : random time variance in seconds added or subtracted from "wait" delay (default 0 - see Notes).
count: sets the amount of ammo given to the player when picked up (default 15).
team : set this to team items. Teamed items will respawn randomly after team master is picked up (see Notes).
target : picking up the item will trigger the entity this points to.
targetname : a target_give entity can point to this for respawn freebies.
notfree : when set to 1, entity will not spawn in "Free for all" and "Tournament" modes.
notteam : when set to 1, entity will not spawn in "Teamplay" and "CTF" modes.
notsingle : when set to 1, entity will not spawn in Single Player mode (bot play mode).
notbot : used to make an item invisible for bot attraction.
-------- SPAWNFLAGS --------
SUSPENDED : item will spawn where it was placed in map and won't drop to the floor.
-------- NOTES --------
The amount of time it takes for an item in the team to respawn is determined by the "wait" value of the item that was picked up previously. So if one of the items in the team has it's "wait" key set to -1 (never respawn), the random respawning cycle of the teamed items will stop after that item is picked up.
When the random key is set, its value is used to calculate a minimum and a maximum delay. The final time delay will be a random value anywhere between the minimum and maximum values: (min delay = wait - random) (max delay = wait + random).
-------- MODEL FOR RADIANT ONLY - DO NOT SET THIS AS A KEY --------
Sidrilian Watch (players get this by default for now, so it shouldn't need to be in the map)
-------- KEYS --------
wait : time in seconds before item respawns after being picked up (default 40, -1 = never respawn).
random : random time variance in seconds added or subtracted from "wait" delay (default 0 - see Notes).
count: sets the amount of ammo given to the player when picked up (default 15).
team : set this to team items. Teamed items will respawn randomly after team master is picked up (see Notes).
target : picking up the item will trigger the entity this points to.
targetname : a target_give entity can point to this for respawn freebies.
notfree : when set to 1, entity will not spawn in "Free for all" and "Tournament" modes.
notteam : when set to 1, entity will not spawn in "Teamplay" and "CTF" modes.
notsingle : when set to 1, entity will not spawn in Single Player mode (bot play mode).
notbot : used to make an item invisible for bot attraction.
-------- SPAWNFLAGS --------
SUSPENDED : item will spawn where it was placed in map and won't drop to the floor.
-------- NOTES --------
The amount of time it takes for an item in the team to respawn is determined by the "wait" value of the item that was picked up previously. So if one of the items in the team has it's "wait" key set to -1 (never respawn), the random respawning cycle of the teamed items will stop after that item is picked up.
When the random key is set, its value is used to calculate a minimum and a maximum delay. The final time delay will be a random value anywhere between the minimum and maximum values: (min delay = wait - random) (max delay = wait + random).
-------- MODEL FOR RADIANT ONLY - DO NOT SET THIS AS A KEY --------
Invader Blaster ModChip. This is what enables the alt-fire for players. Players will not get it by default. When someone dies a player can pick up their modchip.
-------- KEYS --------
wait : time in seconds before item respawns after being picked up (default 40, -1 = never respawn).
random : random time variance in seconds added or subtracted from "wait" delay (default 0 - see Notes).
count: sets the amount of ammo given to the player when picked up (default 15).
team : set this to team items. Teamed items will respawn randomly after team master is picked up (see Notes).
target : picking up the item will trigger the entity this points to.
targetname : a target_give entity can point to this for respawn freebies.
notfree : when set to 1, entity will not spawn in "Free for all" and "Tournament" modes.
notteam : when set to 1, entity will not spawn in "Teamplay" and "CTF" modes.
notsingle : when set to 1, entity will not spawn in Single Player mode (bot play mode).
notbot : used to make an item invisible for bot attraction.
-------- SPAWNFLAGS --------
SUSPENDED : item will spawn where it was placed in map and won't drop to the floor.
-------- NOTES --------
The amount of time it takes for an item in the team to respawn is determined by the "wait" value of the item that was picked up previously. So if one of the items in the team has it's "wait" key set to -1 (never respawn), the random respawning cycle of the teamed items will stop after that item is picked up.
When the random key is set, its value is used to calculate a minimum and a maximum delay. The final time delay will be a random value anywhere between the minimum and maximum values: (min delay = wait - random) (max delay = wait + random).
-------- MODEL FOR RADIANT ONLY - DO NOT SET THIS AS A KEY --------
Health Plant. Gives 50 health. It won't actually disappear, but instead it slowly animates back up to the closed position, at that point a player can run over it again to heal.
-------- KEYS --------
wait : time in seconds before item respawns after being picked up (default 40, -1 = never respawn).
random : random time variance in seconds added or subtracted from "wait" delay (default 0 - see Notes).
count: sets the amount of ammo given to the player when picked up (default 15).
team : set this to team items. Teamed items will respawn randomly after team master is picked up (see Notes).
target : picking up the item will trigger the entity this points to.
targetname : a target_give entity can point to this for respawn freebies.
notfree : when set to 1, entity will not spawn in "Free for all" and "Tournament" modes.
notteam : when set to 1, entity will not spawn in "Teamplay" and "CTF" modes.
notsingle : when set to 1, entity will not spawn in Single Player mode (bot play mode).
notbot : used to make an item invisible for bot attraction.
-------- SPAWNFLAGS --------
SUSPENDED : item will spawn where it was placed in map and won't drop to the floor.
-------- NOTES --------
The amount of time it takes for an item in the team to respawn is determined by the "wait" value of the item that was picked up previously. So if one of the items in the team has it's "wait" key set to -1 (never respawn), the random respawning cycle of the teamed items will stop after that item is picked up.
When the random key is set, its value is used to calculate a minimum and a maximum delay. The final time delay will be a random value anywhere between the minimum and maximum values: (min delay = wait - random) (max delay = wait + random).
-------- MODEL FOR RADIANT ONLY - DO NOT SET THIS AS A KEY --------
Solid entity that rotates continuously. Rotates on the Z axis by default and requires an origin brush. It will always start on in the game and is not targetable.
Sidrial specific: They can now accelerate and deccelerate
-------- KEYS --------
speed : determines how fast entity rotates (default 100).
noise : path/name of .wav file to play. Use looping sounds only (eg. sound/world/drone6.wav).
model2 : path/name of model to include (eg: models/mapobjects/bitch/fembotbig.md3).
origin : alternate method of setting XYZ origin of entity's rotation axis and .md3 model included with entity (default "0 0 0" - See Notes).
light : constantLight radius of .md3 model included with entity. Has no effect on the entity's brushes (default 0).
color : constantLight color of .md3 model included with entity. Has no effect on the entity's brushes (default 1 1 1).
notfree : when set to 1, entity will not spawn in "Free for all" and "Tournament" modes.
notteam : when set to 1, entity will not spawn in "Teamplay" and "CTF" modes.
notsingle : when set to 1, entity will not spawn in Single Player mode (bot play mode).
accel : rate of acceleration (can be negative) [*SIDRIAL Only]
state : when set to 1 the entity will start out at full throttle; when 0 the entity will start out at a standstill. [*SIDRIAL only]
-------- SPAWNFLAGS --------
X_AXIS : entity will rotate along the X axis.
Y_AXIS : entity will rotate along the Y axis.
-------- NOTES --------
You need to have an origin brush as part of this entity. The center of that brush will be the point through which the rotation axis passes. Setting the origin key is simply an alternate method to using an origin brush. It will rotate along the Z axis by default. You can check either the X_AXIS or Y_AXIS box to change that. When using the model2 key, the origin point of the model will correspond to the origin point defined by either the origin brush or the origin coordinate value.*/
angle : determines the opening direction of door (up = -1, down = -2).
speed : determines how fast the door moves (default 100).
wait : number of seconds before door returns (default 2, -1 = return immediately)
lip : lip remaining at end of move (default 8)
targetname : if set, a func_button or trigger is required to activate the door.
health : (default 0) if set to any non-zero value, the button must take damage (any amount) to activate.
dmg : damage to inflict on player when he blocks operation of door (default 4). Door will reverse direction when blocked unless CRUSHER spawnflag is set.
team: assign the same team name to multiple doors that should operate together (see Notes).
light : constantLight radius of .md3 model included with entity. Has no effect on the entity's brushes (default 0).
color : constantLight color of .md3 model included with entity. Has no effect on the entity's brushes (default 1 1 1).
model2 : path/name of model to include (eg: models/mapobjects/pipe/pipe02.md3).
origin : alternate method of setting XYZ origin of .md3 model included with entity (See Notes).
notfree : when set to 1, entity will not spawn in "Free for all" and "Tournament" modes.
notteam : when set to 1, entity will not spawn in "Teamplay" and "CTF" modes.
notsingle : when set to 1, entity will not spawn in Single Player mode (bot play mode).
distance : in degrees, the amount to open up
-------- SPAWNFLAGS --------
START_OPEN : the door to moves to its destination when spawned, and operate in reverse.
REVERSE : if you want the door to open in the other direction, use this switch.
TOGGLE : wait in both the start and end states for a trigger event.
X_AXIS : open on the X-axis instead of the Z-axis
Y_AXIS : open on the Y-axis instead of the Z-axis
-------- NOTES --------
Unlike in Quake 2, doors that touch are NOT automatically teamed. If you want doors to operate together, you have to team them manually by assigning the same team name to all of them. Setting the origin key is simply an alternate method to using an origin brush. When using the model2 key, the origin point of the model will correspond to the origin point defined by either the origin brush or the origin coordinate value.*/
Acts like the halflife trigger_changetarget entity.
-------- KEYS --------
dest_target : name of target that we will switch to
wait : Seconds between triggerings, 0.5 default, -1 = one time only.
random : wait variance, default is 0. Variable sized repeatable trigger. Must be targeted at one or more entities.so, the basic time between firing is a random time between
(wait - random) and (wait + random)
-------- SPAWNFLAGS --------
-------- NOTES --------
Unlike in Quake 2, doors that touch are NOT automatically teamed. If you want doors to operate together, you have to team them manually by assigning the same team name to all of them. Setting the origin key is simply an alternate method to using an origin brush. When using the model2 key, the origin point of the model will correspond to the origin point defined by either the origin brush or the origin coordinate value.*/
