25 CORELDRW.INI is READ-ONLY. This does not prevent you from making changes to your drawing, but changes made to the CorelDRAW working environment will not be saved.
26 Printer Driver cannot be found. Printing is canceled.
27 TEMP Drive Invalid or Full. Running With Limited Memory.
28 Too Many Levels of Grouping. Cannot Group.
29 File Copy Error. TEMP Drive or Output Drive may be Full.
30 Object Too Complex, Exceeds 64K bytes.
31 Can't read metafile. Metafile invalid.
32 Metafile too large to put on clipboard.
33 Unable to create Auto-Backup file. Auto-Backup will not function for this file.
34 Generated contours will not be on drawing surface.
35 Guideline position specified was not on drawing surface.
36 Could not find any guidelines to move.
37 Could not find guideline specified. No guidelines deleted.
38 Ruler zero is too far from page center.
39 Object depth is too long for rotation.
40 Object position specified was not on drawing surface.
41 Cannot fuse this object to a blend.
42 Cannot split blend using this object.
43 Memory error in blend. Blend canceled.
44 Insufficient memory to complete blend.
45 Found un-blendable fill. Using white fill instead.
46 Create Pattern
47 Create pattern with selected area?
48 Could not create pattern. No objects in the selected area.
49 Pattern rectangle is too small. Please use a larger rectangle.
50 Cannot rotate with the current Vanishing Point setting.
51 Cannot rotate a Parallel type extrusion.
52 Performing this operation will separate the blend across frames.\n\nContinue?
53 Text file is too long. Truncating to manageable size.
54 You are currently editing a PowerClip. Please finish your editing before quitting.
55 Warning: Latest changes must be saved before extracting.
57 Cannot blend dynamic blends. Group the blend first.
58 Cannot blend dynamic object. Group the object first.
59 The string is too long for desired font. Not all of the text will be displayed.
60 Exceeded the Maximum Number of Objects.
61 Could not read Keyword/Notes section.
63 This is from an older version of CorelDRAW. Please re-save it to access note editing.
64 Cannot blend bitmaps.
65 Cannot blend paragraph text.
66 Cannot blend groups containing bitmaps, PowerLines, or paragraph text.
67 Cannot blend OLE objects.
68 Cannot use current control. Use Reverse Order to invert.
69 Cannot blend across layers.
70 End object must be in front of start object.
71 Start object must be behind end object.
72 There is no blend group currently selected.
73 No object selected. \nSelect OK to continue, or Cancel to quit
74 Nothing was changed. Objects must overlap each other to be successfully intersected.
75 Nothing changed.
76 Cannot blend Guideline objects.
77 Cannot blend to an Internet object.
80 Objects must be cut on their outline.
81 The selected object cannot be cut by the Knife tool.
82 Transparency cannot be applied to the selected object(s).
83 Unable to perform Order command on a connector line with one or all control objects selected
84 Fountain fill cannot be applied to the selected object.
85 Warning. The tint you are performing will change the color space of one or more of your objects.
88 Too many frames for available memory. Please reduce number of frames.
401 File contains unknown PostScript Texture(s). Using Fill of NONE instead.
404 There are no symbol fonts installed.
405 TrueType fonts must be enabled in the Windows Control Panel in order to create new symbols.
406 CorelDRAW 8 - Create Symbol Warning
407 No objects in drawing.
408 No objects selected.
409 Maximum zoom level achieved.
410 This zoom has exceeded the boundaries of the drawing space. \nYour window will be adjusted accordingly.
412 Cannot Merge Back to changed drawing. Drawings for Merge Back must be Extracted only.
416 CorelDRAW 8 (TM)
417 Version 8
418 Version 8.232
419 COREL CONFIDENTIAL VERSION
420 Copyright ⌐ 1988-1997 Corel Corporation.
421 All rights reserved.
422 WORKING MODEL - NOT FOR SALE
432 Loading Application...
433 Loading User Settings...
434 Registering OLE Automation Commands...
435 Creating Application Environment...
436 Almost Done...
437 Initializing User Interface Components...
438 Initializing Color Management System...
439 Enumerating Fonts...
440 Initializing Engines...
449 \nPANTONE« and other Pantone, Inc. trademarks are the property of Pantone, Inc.
450 \nSix-color Process System Patent Pending - Pantone, Inc. ⌐ Pantone, Inc., 1989, 1996
451 \nKodak Digital Science ICC API copyright ⌐ 1995-1997 Eastman Kodak Company.
453 \n\nKodak Digital Science ICC API copyright ⌐ 1995-1997 Eastman Kodak Company.
454 \n\nPortions copyright ⌐ Zsoft Corporation.
455 \n\nThe Paint Alchemy and Terrazzo Plug-In Filters ⌐
456 1996 XAOS, Tools, Inc. All rights reserved.
457 \n\nDIC Color Guide Process Color Note computer simulations used in this
458 product may not match DIC Color Guide and DIC Color Guide Part2
459 identified solid color standards. Use current DIC Color Guide Process Color
460 Note Manuals for better use. DIC, DIC Color Guide Process Color Note Part2
461 are trademarks of Dainippon Ink && Chemicals, Inc.
462 \n\nBar Code Pro« by Allen Lubow; program by Xinying Gu copyright ⌐
463 1991-1996 SYNEX. All rights reserved. Bar Code Pro« is a registered
464 trademark of SYNEX. The barcode technology used in CorelDRAW is based
465 on Bar Code Pro« by SYNEX, publishers of microcomputer software,
466 barcode readers and scanners. For more information on the use of
467 barcode call SYNEX at (718) 499-6293, fax (718) 768-3997, or write
468 to SYNEX, 692 10th St, Brooklyn, NY 11215-4502 or visit their homepage
469 at http://www.snx.com
470 \n\nAdobe File Utilities filters and converters copyright ⌐ 1986-1996
471 Adobe Systems Incorporated. Adobe and the Adobe logo are trademarks of
472 Adobe Systems Incorporated. Contains an implementation of the LZW
473 algorithm licensed under Patent No. 4,558,302.
474 CorelDRAW 8 Working Model
475 This working model cannot perform this function.\n\nFor ordering information, please refer to the on-line help.\n\nWould you like to see the ordering information now?
476 This is a working model of CorelDRAW 8.\n\nFor ordering information, please refer to the on-line help.\n\nWould you like to see the ordering information now?
477 Frame %d
480 Invalid Grid Frequency.
497 Import Text
499 Merge Script Files
512 *** Unused ***
544 Graphic%d
545 CorelDRAW 8 Defaults
547 None
548 1K (mono)
549 5K (color)
550 10K (color)
551 3K (color)
552 Version 5.0
553 Version 6.0
554 Version 7.0
555 Version 8.0
557 Current
558 None
559 1K (mono)
560 2K (mono)
561 4K (color)
562 8K (color)
563 Attempting to open a file created with a newer version of CorelDRAW!\nDue to the differences in file format, this file cannot be loaded.
575 %s will be saved in version 8 file format.
576 Error %s %Fs file.
577 Not enough disk space to save file %Fs.
578 Opening
579 Reading
580 Writing
581 Attempting to open Version 1.x or Version 2.x file.\nThis file format is not supported. Please access \nthe readme file for additional information.
582 File %s contains an invalid object.
583 File %s contains an invalid fill ID.
584 File %s contains an invalid outline ID.
585 File %s contains an invalid style ID.
586 File %s contains an invalid fill.
587 File %s contains an invalid outline.
588 File %s contains an invalid style.
589 Error reading a bitmap in file %s.
590 File %s contains an invalid arrow head.
591 File %s contains an invalid view.
592 File %s is missing a linked object.
593 Disk is write-protected.
594 Disk cannot be accessed.
595 Deleting
596 Error renaming %s file to %s.
597 Error copying %s file to %s.
598 \n\nClick ABORT if you do not wish to open the file.\nClick RETRY if you wish to continue opening the file.\nClick IGNORE if you wish to open the file without further error messages.
599 Editing PowerClip Contents (Level %d)
600 %s
601 %s x 10
608 Cannot Draw on %s %s
609 Inter-Paragraph:
610 %s on %.32s %s
611 Width: %s Height: %s %s
612 (Envelope)
613 Inter-Character:
614 Inter-Word:
615 Inter-Line:
616 Leave Original
617 Scale: %.1lf %% %s
618 Y Scale: %.1lf %% %s
619 X Scale: %.1lf %% %s
620 Angle: %s degrees
621 Group of %d Objects
622 Rectangle
623 Ellipse
624 Curve
625 Artistic Text: %s (%s)
626 Gray-Level Bitmap
627 Monochrome Bitmap
628 Open Path
629 For Tracing
630 Outline: None
631 Fill:
632 Fill: Fountain
633 Paragraph Text: %d Character(s)
634 Fill:
635 %d Objects Selected
636 Curve: %ld Nodes on %d Subpaths
637 Curve: %ld Nodes
638 First Node of a Closed Curve
639 First Node of an Open Curve
640 Selected Node: Line %s
641 Selected Node: Curve %s
642 Symmetrical
643 Smooth
644 Cusp
645 %ld Selected Nodes on %d Subpaths
646 %ld Selected Nodes
647 Rectangle: %s %i %s
648 (Distorted)
649 Ellipse: From %s to %s degrees Total Angle = %s degrees %s
834 No more space in arrows file. Please delete an existing arrow.
840 Delete Vector Pattern
841 Delete File: %s?
848 Welcome Screen
849 Start a New Document
850 Open an Existing Document
851 Open the Last Edited Document
852 Select a Template
853 Start CorelTUTOR
872 Error: File %s has been deleted.
873 Error: Nothing selected, cannot delete.
880 Preview
881 Stop
882 Previewing frame: %d
885 Insert new frames
886 Append new frames
887 Make common object
896 Outline: Hairline
898 Fill: Bitmap pattern
899 Fill: Full color pattern
900 Fill: Texture
901 2-color pattern
902 Snapped to Symmetrical Polygon
903 Externally Linked
904 Guideline
905 Snapped to Guideline
906 (Distortion)
907 %sDrop Shadow Group
908 Show Paragraph Text Frames
909 Swap: %lu MB
910 Mem: %d KB
911 Outline:
912 Fill:
913 Mouse Position
914 Object Information
915 Object Details
916 Snap Status
917 Memory Allocated
918 Swap Remaining
919 Time
920 Date
921 Locked
922 Duotone Bitmap
923 Control Duotone Bitmap
924 Clone Duotone Bitmap
925 Form Object
926 Java applet
927 Embedded Object
944 bytes
1008 Insert New Object
1009 CorelDRAW 8.0 Graphic
1011 Unable to add Office compatible entries to registry.
1024 Bitmap
1025 CorelDRAW Objects
1026 Text
1027 Text
1028 Edit &Bitmap
1057 This Section is %d%% complete.
1058 Cannot Paste Data. Server Is Busy
1065 Groups must contain a rollup. All empty groups are being removed.
1092 This object has been changed.\n\n Update %s before proceeding?
1093 Leave data on clipboard for other applications?
1094 The specified data format is not available.
1096 Cannot start the server application. Make sure there is enough memory and that the server is installed properly.
1120 Layer Override Color
1121 Grid
1122 Guides
1123 Desktop
1124 Layer
1125 The name is missing.
1126 The layer name has already been used.
1127 This layer contains objects on other pages.\n\nDelete this layer and all of its objects?
1128 Multiple layers selected
1129 Multiple Layer Settings
1130 Settings
1131 Maximum name length is 32, cropping.
1132 Local
1133 Common
1134 Internet Layer
1135 %s is a reserved layer name.
1136 Can not rename %s.
1143 CorelDRAW
1145 CorelDRAW CMX
1146 CorelDRAW 8.0 Exchange Graphic
1153 Cannot edit links to CMF files.
1216 Print File (*.prn)
1219 CorelDRAW File (*.cdr)
1220 Pattern File (*.pat)
1221 Bitmap File (*.bmp)
1222 Text File (*.txt)
1223 CorelDRAW Template (*.cdt)
1224 Preset File (*.pst)
1225 Corel Presentation Exchange 6.0 (*.cmx)
1226 All Files (*.*)
1248 Object
1249 Unknown
1251 Bitmap
1252 Picture
1253 Paragraph Text
1254 Device Independent Bitmap
1255 Picture( Enhanced Metafile )
1344 Contour Offset too large
1347 Object Properties
1348 Tool Properties
1349 Style Properties
1352 A factory preset named '%s' already exists.\n\nPlease enter a new name.
1353 A custom PowerLine named '%s' already exists.\n\nReplace?
1376 CorelDRAW is Cutting...
1377 CorelDRAW is Copying...
1379 CorelDRAW is Pasting...
1384 of %d objects
1385 Error creating temporary backup.\nCannot save to the chosen directory.
1428 Field
1429 Value
1431 Field%d
1440 Select Master
1441 Select Clones
1442 Revert To Master...
1443 Lock Contents to PowerClip
1474 Error generating texture
1488 Rendering images
1489 Frame %d
1504 Current Text Editing
1505 &Undo %s %s
1506 R&edo %s %s
1507 &Repeat %s %s
1536 Outline
1537 Fill
1538 Pen
1539 Pen/Outline
1540 Create
1541 Edit
1542 Curve Append
1543 Curve Edit
1544 Create PowerLine
1545 Bitmap Crop
1546 Knife Cut
1547 Erase
1548 Edit Symmetrical
1549 Auto-Close
1550 Open Closed Curve
1552 Cut
1553 Paste
1554 Delete
1555 Duplicate
1556 Clone
1557 Copy Attributes
1558 Extract From PowerClip
1559 Place Inside PowerClip
1560 Copy PowerClip
1561 Reflect
1568 Move
1569 Stretch
1570 Rotate
1571 Skew
1572 Clear Transformations
1573 Edit PowerClip Contents
1574 Finish Editing PowerClip
1576 Edit Text
1577 Fit Text To Curve
1578 Link Paragraph Text Frames
1579 Edit Paragraph Text
1580 Unlink Paragraph Text Frames
1581 Edit Paragraph Text Columns
1584 Add Envelope
1585 Edit Envelope
1586 Copy Envelope
1587 Clear Envelope
1588 Add Perspective
1589 Edit Perspective
1590 Copy Perspective
1591 Clear Perspective
1592 Extrude
1593 Copy Extrude
1594 Clone Extrude
1595 Clear Extrude
1596 Blend
1597 Copy Blend
1598 Clone Blend
1599 Clear Blend
1600 Split Blend
1601 Fuse Blend
1602 Contour
1603 Copy Contour
1604 Clone Contour
1605 Clear Contour
1606 PowerLine
1607 Copy PowerLine
1608 Clone PowerLine
1609 Clear PowerLine
1610 Edit Pressure
1611 Shared Extrude Vanishing Point
1612 Lens
1613 Apply Script
1614 Lens Removal
1615 Copy Lens
1616 Align
1617 To Front
1618 To Back
1619 Forward One
1620 Back One
1621 Reverse
1622 Group
1623 Ungroup
1624 Combine
1625 Break Apart
1629 Separate
1630 Convert To Curves
1632 Move To Layer
1633 Copy To Layer
1634 Delete Layer
1635 Create Layer
1636 Edit Layers
1637 Multi-Layer
1638 Move Layer
1639 Toggle Visibility
1640 Toggle Layer Printable
1641 Toggle Layer Lock
1642 Distribute
1643 Before Object
1644 After Object
1645 Ungroup All
1649 Create New Style
1650 Apply Style
1651 Save As Style
1652 Delete Style
1653 Revert To Style
1654 Update Style
1655 Load Template
1656 Merge Templates
1657 Rename Style
1664 Copy Style Attributes From
1665 Delete Frame
1666 Insert Frame
1667 Move To Frame
1668 Copy To Frame
1669 Make Object Common
1670 Toggle Master Layer
1671 Change Layer Color
1672 Rename
1673 Apply Element of Style
1674 Toggle Local Layer
1680 Insert Page
1681 Delete Page
1682 Page Setup
1683 Cleanup Desktop
1684 Drop Shadow
1685 Copy Drop Shadow
1686 Clear Drop Shadow
1687 Clone Drop Shadow
1689 Distortion
1690 Copy Distortion
1691 Clear Distortion
1696 Add Object Data
1697 Delete Object Data
1698 Modify Object Data
1699 Modify Object Data Field
1700 Change Object Data Field Order
1701 Copy User Data
1702 Data Manager Delete
1703 Delete Object Data
1704 Data Manager Paste
1712 Change Text Case
1713 Break Text Apart
1714 Combine Text
1715 Convert To Paragraph Text
1716 Convert To Artistic Text
1717 Repel Paragraph Text
1718 Edit Bitmap
1719 Fit Text To Frame
1720 Inflate Bitmap
1721 Make Text HTML Compatible
1728 Edit Properties
1729 Place Text Inside Path
1732 Replace
1733 Replace All
1736 Edit GuideLine Dialog
1754 Auto Create Color Styles
1755 Fill and Outline
1756 Move Color Styles
1757 Delete Color Styles
1758 Update Color Styles
1759 Bitmap Color Mask
1760 Move
1761 Move Center
1762 Revert To Master
1763 Create Linear Dimension
1764 Overprint Fill
1765 Overprint Outline
1766 Tiled Symbol
1767 Edit Linear Dimension
1768 Apply Dimension Text Label
1769 Create Callout
1770 Create Angled Dimension
1772 Create Connector Line
1774 Modify GuideLine
1775 Delete GuideLine
1776 Bitmap Effects
1777 Natural Pen
1778 Bitmap Effect
1779 Edit Internet Properties
1780 Draped Fills
1781 Convert To Bitmap
1783 Import File
1785 3D Extrude
1786 Edit Internet Bookmark
1787 Lock
1788 Unlock
1790 Create Internet Layer
1791 Edit Form Object Properties
1792 Clear Effect
1793 Clear Envelope
1794 Clear Perspective
1795 Clear Extrude
1796 Clear Blend
1797 Clear Contour
1798 Clear PowerLine
1799 Clear Drop Shadow
1800 Clear Distortion
1809 Default Artistic Text
1810 Default Paragraph Text
1811 Default Graphic
1813 Save Style As
1814 A style named '%s' already exists.\nDo you want to overwrite its attributes?
1815 '%s' is the default %s style.\n\nA default style cannot be deleted.
1816 artistic text
1817 paragraph text
1818 non-text
1819 A style of a different type named '%s' already exists.\n
1820 '%s' is the default %s style.\n\nA default style must have a fill and an outline.
1821 Find
1822 Find Next
1824 No Template
1825 The template %s has changed.\n\nSave current changes?
1826 Bullet1
1827 Bullet2
1828 Bullet3
1829 Changing text properties when nothing is selected will modify the attributes used by the text tools when creating new objects. \n\nClick on the boxes below to choose which tools will receive new default settings.
1830 Nothing is currently selected. To which types of new objects will the default apply?
1831 Too many objects are currently selected. To which types of new objects will the default apply?
1832 The template %s contains style names that are currently being used.\n\nDo you wish to update objects that use these styles?
1837 Name
1838 Type
1839 Hotkey
1840 Graphic
1841 Artistic Text
1842 Paragraph Text
1843 New Graphic
1844 New Artistic Text
1845 New Paragraph Text
1846 Document template:
1847 Special Bullet1
1848 Special Bullet2
1849 Special Bullet3
1850 You must type a style name.
1851 Apply Element of Style
1852 A style name cannot exceed %d characters.
1853 Copy of %s
1854 &More Styles...
1857 Wedge1
1858 Wedge2
1859 Wedge3
1860 Wedge4
1861 WoodCut1
1862 WoodCut2
1863 WoodCut3
1864 WoodCut4
1865 Trumpet1
1866 Trumpet2
1867 Trumpet3
1868 Trumpet4
1869 Bullet1
1870 Bullet2
1871 Bullet3
1872 Bullet4
1873 Teardrop1
1874 Teardrop2
1875 Pressure
1876 Nib
1877 Leaky Pen
1878 Maximum Width
1879 Custom
1880 None
2048 Horizontal
2049 Original
2050 Putty
2051 Vertical
2052 Text
2054 Add Preset
2064 Object Data
2065 Object Data Error
2067 An error occurred trying to load the \ndefault data field "%s".
2068 An error occurred trying to load the \nformat string "%s" for the \ndefault data field "%s".
2069 Clear the data from the selected field of the object?
2070 Clear all object data from the selected object(s)?
2071 A field already exists with the same name.
2072 The specified format is being used by the dimension command
2073 The specified format is in use by the field "%s"
2074 File ww Edit ww Field Options ww Preferences
2075 TOTAL
2076 One or more objects must be selected in order to access the Object Data Manager.
2077 Delete the selected fields from the list of all fields, and from all objects in the document?
2093 Delete Page
2094 Invalid %s
2095 Value must be between %u and %u.
2096 Width: %s %s\nHeight: %s %s
2112 Letter
2113 Legal
2114 Tabloid
2115 Slide
2116 Statement
2117 Executive
2118 Fanfold
2119 A3
2120 A4
2121 A5
2122 B4
2123 B5
2124 Envelope #9
2125 Envelope #10
2126 Envelope #11
2127 Envelope #12
2128 Envelope #14
2129 Envelope Monarch
2130 Custom
2144 Full Page
2145 Book
2146 Booklet
2147 Tent Card
2148 Side-Fold Card
2149 Top-Fold Card
2160 One Page per Sheet
2161 Two Pages per Sheet\nCut in Middle
2162 Two Pages per Sheet\nFold in Middle
2163 Two Pages per Sheet\nFold on Top
2164 Four Pages per Sheet\nFold on Left
2165 Four Pages per Sheet\nFold on Top
2183 L&eft Margin:
2184 Bullet &Indent:
2192 pt
2193 8
2194 720.0pt
2195 Name
2196 Font Size
2208 Character Attributes
2209 Paragraph Attributes
2210 Text Attributes
2246 Object Data Manager - %s
2289 Comments
2290 Cost
2291 Name
2304 0
2305 #,##0.00""
2306 #,##0.0 mm
2307 0 picas 0 points
2308 0.00 pts
2309 #,##0.00 cm
2310 #,##0 "pxl"
2311 #,##0'' 0.00""
2312 #,##0.00 mi
2313 #,##0.000 m
2314 #,##0.000 km
2315 0.0 deg
2321 0
2322 0
2323 0
2324 0
2325 0
2352 VP Locked To Object
2353 VP Locked To Page
2354 Copy VP From...
2355 Shared Vanishing Point
2356 Rotated Extrusion
2357 Cannot share vanishing points with, or copy vanishing points from rotated extrusions.\n\nDo you wish to try again?
2368 0
2369 0.0
2370 0.00
2371 0.000
2372 0.0000
2373 0.00000
2374 0.000000
2375 0.0000000
2376 0.00000000
2377 0.000000000
2378 0.0000000000
2379 0
2380 0 1/2
2381 0 1/4
2382 0 1/8
2383 0 1/16
2384 0 1/32
2385 0 1/64
2386 0 1/128
2387 0 1/256
2388 0 1/512
2389 0 1/1024
2390 0'-0"
2391 0'-0.0"
2392 0'-0.00"
2393 0'-0.000"
2394 0'-0.0000"
2395 0'-0.00000"
2396 0'-0.000000"
2397 0'-0.0000000"
2398 0'-0.00000000"
2399 0'-0.000000000"
2400 0'-0.0000000000"
2401 0'-0"
2402 0'-0 1/2"
2403 0'-0 1/4"
2404 0'-0 1/8"
2405 0'-0 1/16"
2406 0'-0 1/32"
2407 0'-0 1/64"
2408 0'-0 1/128"
2409 0'-0 1/256"
2410 0'-0 1/512"
2411 0'-0 1/1024"
2412 Decimal
2413 Fractional
2414 U.S. Engineering
2415 U.S. Architectural
2416 "
2417 in
2418 inches
2419 '
2420 ft
2421 mi
2422 miles
2423 yds
2424 yards
2425 m
2426 meters
2427 km
2428 kilometers
2429 cm
2430 centimeters
2431 mm
2432 millimeters
2433 picas
2434 points
2435 ciceros
2436 didots
2437 ""
2438 in
2439 inches
2440 ''
2441 ft
2442 mi
2443 miles
2444 yds
2445 yards
2446 m
2447 meters
2448 km
2449 kilometers
2450 cm
2451 centimeters
2452 mm
2453 millimeters
2454 picas
2455 points
2456 ciceros
2457 didots
2458 1:1
2459 1:2
2460 1:4
2461 1:8
2462 1:16
2463 1:10
2464 1:20
2465 1:30
2466 1:40
2467 1:50
2468 1:100
2469 3" = 1'
2470 1-1/2" = 1'
2471 1" = 1'
2472 3/4" = 1'
2473 1/2" = 1'
2474 3/8" = 1'
2475 1/4" = 1'
2476 3/16" = 1'
2477 1/8" = 1'
2478 3/32" = 1'
2479 1/16" = 1'
2480 1/32" = 1'
2481 1/64" = 1'
2482 1/128" = 1'
2483 2:1
2484 4:1
2485 8:1
2486 10:1
2487 100:1
2488 degrees
2489 radians
2490 gradians
2491 degrees
2492 radians
2493 gradians
2494 Unconstrained
2495 Vertical
2496 Horizontal
2497 Same as Line 2
2576 Apply
2577 Apply To Frame
2578 Apply
2579 Set Defaults
2597 Cannot get the text properties from the selected object.
2598 Cannot set the text properties for the selected object.
2599 Full Text
2600 Highlighted Text
2601 Selected Text
2602 Current Text Object.
2608 Object Types
2609 Fill Types
2610 Outlines
2611 Colors
2612 Special Effects
2617 Rectangle
2618 Ellipse
2619 Polygon
2620 Curve
2621 Artistic Text
2622 Paragraph Text
2623 Dimension
2624 Bitmap
2625 OLE
2640 No Fill
2641 Uniform Fill
2642 Fountain Fill
2643 Two Color Bitmap Fill
2644 Full Color Bitmap Fill
2645 Vector Fill
2646 Texture Fill
2647 PostScript Fill
2656 CMYK
2657 RGB
2658 HSB
2659 Lab
2660 Grayscale
2661 HLS
2662 YIQ
2663 PANTONE MATCHING SYSTEM«
2664 PANTONE« Process
2665 TRUMATCH
2666 FOCOLTONE
2667 SpectraMaster
2668 TOYO
2669 DIC
2672 No Outline
2673 Solid
2674 Dashed
2675 Calligraphy
2688 Blend
2689 Extrude
2690 Contour
2691 Text on a Path
2692 Perspective
2693 Envelope
2694 PowerLine
2695 PowerClip
2696 Lens
2697 Clone
2704 Select All
2705 Add to selection
2706 Select from selection
2707 Remove from selection
2708 Report on all pages
2720 Font
2721 Alignment
2722 Spacing
2723 Lines
2724 Indents and Margins
2725 Text Effects
2726 Typeface
2727 Typestyle
2728 Size
2729 Justification
2730 Tabs
2731 Hyphenation
2732 Inter-Character Spacing
2733 Inter-Word Spacing
2734 Inter-Line Spacing
2735 Inter-Language Spacing
2736 Spacing Before Paragraphs
2737 Spacing After Paragraphs
2738 Underline
2739 Overline
2740 Strikeout
2741 Bullet Indent
2742 First Line Indent
2743 Rest of Lines Indent
2744 Right Margin
2745 Superscript or Subscript
2746 Capitalization Effect
2747 Bullet
2748 Fill
2749 Outline
2750 Text
2752 Click a graphic to begin...
2753
2754 Start a new graphic with the current default template.
2755
2756 Open %s,
2757 to continue working where you left off.
2758 There are no documents in your history list. Please select another option.
2759
2760 Open an existing file.
2761
2762 Start a new graphic using the template of your choice.
2763 Select from 450 professionally created designs.
2764 Follow step-by-step instructions on completing dozens of
2765 tasks from creating objects to publishing your work.
2766 Learn about the new features in CorelDRAW 8, including
2767 optimized performance, interactive tools and more.
2768 Quality
2769 Preview
2784 Workspace
2785 Document
2786 Global
2794 General
2795 Display
2796 Edit
2797 HTML Conflicts
2798 Warnings
2799 Save
2800 Memory
2801 Plug-Ins
2802 Text
2803 Toolbox
2804 Customize
2805 Paragraph
2806 Fonts
2807 Spelling
2808 Type Assist
2809 Pick Tool
2976 Shape Tool
2977 Knife Tool
2978 Eraser Tool
2979 Zoom, Pan Tool
2980 Freehand/Bezier Tool
2981 Natural Pen Tool
2982 Dimension Tool
2983 Angular Dimension Tool
2984 Connector Tool
2985 Rectangle Tool
2986 Ellipse Tool
2987 Polygon Tool
2988 Spiral Tool
2989 Graph Paper Tool
2990 Text Tool
2991 Outline Tool
2992 Fill Tool
2993 Shortcut Keys
2994 Menus
2995 Toolbars
2996 Color Palette
2997 Roll-Ups
3008 General
3009 Page
3010 Grids and Guidelines
3011 Rulers
3012 Styles
3013 Save
3014 Publish To Internet
3015 Size
3016 Layout
3017 Label
3018 Background
3019 Image
3020 Text
3021 Links
3040 Color Management
3041 Printing Defaults
3042 Bitmap Effects
3043 Filters
3044 General
3045 Profiles
3046 Associate
4464 Moves, sizes, or closes the application window
4465 Quits CorelDRAW and prompts you to save the active drawing
4466 Enlarges the active window to full size
4467 Reduces the window to an icon
4468 Changes the window position
4469 Restores the window to normal size
4470 Changes the window size
4471 Switches to another active application
4480 For Help, press F1
4481 Updates the active drawing\nUpdate
4482 Exits CorelDRAW and returns to the specified application\nExit and Return
4973 Bitmap Mask
4975 Color Selector
4976 General
4977 Display
4978 Advanced
5633 Script Recording
5634 Selection of additional objects during transactions being recorded for a script is not allowed.
5636 %s - Recording Preset
5637 The object creation which just occurred is not valid during preset recording.
5638 Save Extrude Script
5639 A script by the name of "%s" already exists. Please use another name for the script.
5640 Cannot create the Preset file coreldrw.pst.
5641 No script can be created since no transactions were recorded. Script recording halted.
5642 Preset%02d
5643 Extrude%02d
5644 %s transactions are not valid as the first transaction of a script.
5645 Script recording must start with a transaction involving only one object, or a Create transaction.
5646 Closing the Script Roll-Up is not allowed during script recording.
5647 %s transactions require %d objects when script recording is active.
5648 %s transactions require either 1 or 2 objects when recording is active, but received %d.
5649 %s transactions require 1 or more objects when recording is active, but received %d.
5650 %s transactions require either 2 or 3 objects when recording is active, but received %d.
5651 %s transactions require 2 or more objects when recording is active, but received %d.
5652 %s transactions are not allowed in scripts, so it has not been recorded.
5653 Some part of the %s transaction was not allowed in scripts, so it has not been recorded.
5654 An error occurred while creating the preset file coreldrw.pst.
5655 This operation cannot be performed while script recording is in process.
5656 Start Recording
5657 Stop Recording
5658 Save As...
5659 Delete Script(s)...
5660 The recorder will only apply setting changes to the entire text object, not individual words or characters.
5661 This script file was not created by a compatible version of CorelDRAW.
5662 The transaction took place in a document other than the\none where the recording began, so it has not been recorded.
5663 Need a valid selection to apply preset
5664 Object Data
5665 Transform
5666 Dimension
5667 Fill
5668 Pen
5669 Layers
5670 Node Edit
5671 Envelope
5672 Symbols
5673 Frame Select
5674 Blend
5675 Extrude
5676 Contour
5677 Text
5678 Fit Text To Path
5679 PowerLine
5680 Styles
5681 Canvas
5682 Lens
5683 Presets
5684 Align
5686 Mosaic-1
5687 Mosaic-2
5712 No Roll-Ups
5713 All Roll-Ups Arranged
5714 Save On Exit
5715 Custom
5760 No filter for dropped file.\n Create an OLE object from the file?
5888 Failed to open a COREL Mosaic rollup!
5889 The %s directory from coreldrw.ini does not exist. A default directory will be used to open this rollup.
5968 Find and Replace
5969 Text not found!
5970 Replace complete.
5971 End of document reached
5984 Search Report
5985 The current page has one object matching the search criteria.
5986 The current page has %d objects matching the search criteria.
5988 Con&vert
5989 Con&vert To Paragraph Text
5990 Con&vert To Artistic Text
5991 Backup_of_%s
5992 Autobackup_of_%s
6000 M&ouse Coordinates
6001 Sna&p Constraints
6002 O&utLine
6016 No Lens Effect
6017 Brighten
6018 Color Add
6019 Color Limit
6020 Custom Color Map
6021 Fish Eye
6022 Heat Map
6023 Invert
6024 Magnify
6025 Tinted Grayscale
6026 Transparency
6027 Wireframe
6028 Rat&e:
6029 Amo&unt:
6030 %
6031 x
6032 Direct Palette
6033 Forward Rainbow
6034 Reverse Rainbow
6035 Bitmap
6037 View
6038 Page
6039 View Manager Error
6040 Error: Duplicate View - View not added
6048 The object selected must have a uniform fill.
6049 Script update color from...
6050 No fill color
6051 Fill color:
6052 From:
6053 To:
6054 Texture
6055 No outline color
6056 Outline color:
6057 Use Object Fill
6058 Solid Fill:
6059 %d:
6060 modifying
6061 %s #%d
6062 creating
6063 becoming
6064 Creation of
6065 Move
6066 Stretch
6067 Skew
6068 Rotate
6069 Fill
6070 Pen on
6071 Outline on
6072 Pen Outline on
6073 Duplicate
6074 Clone of
6075 Lens Set on
6076 Lens Copy from
6077 Align
6078 Distribute
6079 Blend from
6080 Copy Blend from
6081 Clone Blend from
6082 Extrude
6083 Copy Extrude from
6084 Clone Extrude from
6085 Contour
6086 Copy Contour from
6087 Clone Contour from
6088 Clear Extrude of
6089 Clear Blend of
6090 Clear Contour of
6091 Edit Text of
6092 Edit Paragraph Text of
6093 Weld
6094 Intersect
6095 Trim
6096 Overprint Trim of
6097 Overprint Outline of
6098 Add Perspective to
6099 Edit Perspective of
6100 Copy Perspective from
6101 Copy Style from
6102 Combine
6103 Clear Perspective of
6104 Reset Transformation for
6105 To Front
6106 To Back
6107 Forward One
6108 Back One
6109 Reverse
6110 Convert To Curves
6111 Delete
6112 Lens Clear of
6113 Unsupported operation on
6114 an object
6115 rectangle
6116 ellipse
6117 curve
6118 text
6119 bitmap
6120 paragraph
6121 blend link
6122 extrude link
6123 OLE object
6124 grid layer
6125 guides layer
6126 powerline
6127 powerline
6128 contour link
6129 dimension link
6130 desktop layer
6131 edit layer
6132 container layer
6133 blend
6134 extrude
6135 powerline
6136 contour
6137 group
6138 target object
6139 Group with
6140 multiple selection
6141 %s
6142 to
6143 an unrecorded object
6144 Ne&w...
6145 &Open...
6146 &Merge with...
6147 &Save as...
6148 New Presets File
6149 Open Presets File
6150 Save Presets File as...
6151 Merge Presets File with...
6152 pst
6153 CorelDraw Presets (*.pst)
6154 *.pst
6155 &Details <<
6156 Detail&s >>
6157 before
6158 after
6159 Arrange
6160 %s
6161 symmetrical polygon
6162 spiral
6163 graph paper
6192 Intersect
6193 Trim
6194 Weld
6195 Weld
6196 Intersect
6197 Trim
6200 Library
6201 Standard
6202 Internet Objects
6203 Transform
6207 3D Toolbox
6208 Toolbox
6209 Shape Edit Flyout
6210 Zoom Flyout
6211 Curve Flyout
6212 Dimensions Flyout
6213 Object Flyout
6214 Text Flyout
6215 Interactive Tool Flyout
6216 Outline Flyout
6217 Fill Flyout
6218 Text
6219 Node Edit
6220 Zoom
6221 Roll-Ups
6222 Workspace
6223 Property Bar
6224 Soft Returns
6225 Hard Returns
6226 Tabs
6227 Spaces
6228 Options
6229 Texture Fills
6230 Special Effects
6231 File Contents
6232 Bitmap Compression
6233 Graphic Object Compression
6240 The Eraser tool requires that only one object be selected.
6241 The Eraser tool requires that you select an object.
6242 The Eraser tool cannot be used on the selected object.
6243 Rebuilding textures decreases file size, but takes longer to open.
6244 Rebuilding special effects decreases file size, but takes longer to open.
6245 Save only changed items. No backup will be made.
6246 Bitmap compression will decrease file size, but will take longer to open.
6247 Compressing graphic objects decreases file size, but takes longer to open.
6248 Rebuild on load
6249 Rebuild on load
6250 Write only required data
6251 Use bitmap compression
6252 Use graphic compression
6253 Bounding box only
6254 Fast
6255 Normal
6256 Shaping
6257 Dimensioning
6258 Transform
6259 Attributes
6260 Effects
6261 Styles
6263 Script and Preset Manager
6264 Object Manager
6265 Corel Tutor
6272 Wireframe Display
6273 3D Camera Flyout
6274 HTML Object Conflict Analyzer
6275 3D View Quality Flyout
6276 3D Director View
6277 Hints
6278 View Manager
6279 Object Properties
6281 Bookmark Manager
6288 &Style :
6289 &Apply All
6298 Hide Colors
6299 Show Colors
6300 Depth: %s %s
6400 %d x %d pixels
6401 Monochrome
6402 16 colors
6403 256 colors
6404 %d Bit Color Grayscale (%d colors)
6405 %d Bit Color
6406 %d x %d dpi
6407 %d Bit Color CMYK
6408 %d Bit Color RGB
6409 %d Bit Color Lab
6410 %d Bit Color Paletted (%d colors)
6411 %d Bit Color Duotone (%d colors)
6420 %d
6421 %d
6422 (%-6s, %-6s) %s
6440 %-6s %s
6441 %-6s %s
6442 %d
6443 (%-6s, %-6s) %s
6460 Vertical
6461 Horizontal
6462 Slanted
6463 Leader
6464 Angle
6465 Size:
6466 %s %s
6467 Angle:
6468 %f %s
6480 %d bytes
6600 Applying the %s page's changes might conflict with\nthe modifications made in the %s page.\n\nDo you want the %s page to reflect\nthe selected objects' new properties?
6601 Object Property Sheet
6912 General
6913 Tools:
6914 Pick
6915 Shape
6916 Eraser
6917 Knife
6918 Zoom, Pan
6919 Freehand/Bezier
6920 Dimension
6921 Angular Dimension
6922 Rectangle
6923 Ellipse
6924 Polygon
6925 Graph Paper
6926 Spiral
6927 Text
6928 Paragraph Text
6929 Connector
6930 Fill
6931 Outline
6932 Natural Pen
6933 Do you want to apply the changes you made in some of the tool property pages?
6934 Tools properties
6935 &Apply All
6942 Using %s's attributes which are:
6943 %s %s
6944 Tool
6945 Traditional
6946 Interactive
7114 &Apply All
7168 Previe&w
7169 Re&set
7424 What's This?
7425 Properties
7426 Changing text properties now will modify the attributes used by the artistic text tool when creating new objects. Click cancel if you don't want to modify the artistic text tool's settings.
7427 Changing text properties now will modify the attributes used by the paragraph text tool when creating new objects. Click cancel if you don't want to modify the paragraph text tool's settings.
7428 Changing outline properties when nothing is selected will modify the attributes used by tools when creating new objects. \n\nClick on the boxes below to choose which tools will receive new default setting.
7429 Changing fill properties when nothing is selected will modify the attributes used by tools when creating new objects. \n\nClick on the boxes below to choose which tools will receive new default setting.
7430 Page %d
7431 Could not load the MULTIMEDIA MANAGER. \nPlease ensure that it is properly installed.
7432 Customize
7433 Find Text
7434 Replace Text
7435 Finish Editing
7436 Edit Width
7446 Corel Memo...
7456 Could not execute method because there is no active document.
7457 Could not execute method because there are no selected objects.
7458 Could not initialize Scripting Engine.
7459 Selected object(s) not correct type for this operation.
7460 Apply Styles
7461 This style was not found
7462 Apply %s style
7463 Changing fill and outline properties when nothing is selected will modify the attributes used by tools when creating new objects. \n\nClick on the boxes below to choose which tools will receive new default setting.
7488 Export error
7489 An internal filter limitation prevented the export from succeeding\nTry using another export filter
7490 Invalid selection for True Type export
7491 Error while exporting
7497 Import Warning
7504 Import error
7505 An internal filter limitation prevented the import from succeeding\nTry using another import filter
7506 Find Next
7507 Find
7508 File format is not supported
7509 Changing text properties when nothing is selected will modify the attributes used by the text tools when creating new objects.
7510 There was a problem reading file %s
7511 Cannot import an empty document
7512 You are importing a file into a document with facing pages. To ensure proper alignment, please turn off facing pages before importing.
7513 Do you want to continue the import?
7536 Not a valid page number.
7552 Edit Blend Group
7553 Edit Extrude Group
7554 Edit Contour Group
7555 Edit Powerline Group
7556 Edit Dimension Group
7557 Edit Extrude Group
7568 Hierarchy
7569 NONE
7570 Rectangle
7571 Ellipse
7572 Curve
7573 Artistic Text
7574 Bitmap
7575 Paragraph Text
7576 Blended
7577 Extruded
7578 Text Path
7579 OLE
7581 Guide
7582 Power Link
7681 Line
7682 Contour
7683 Linear Dimensions
7684 Desktop
7685 Contents
7686 Container
7687 Polygon
7688 Spiral
7690 Root
7691 Page
7692 Layer
7693 Group
7694 Linked Group
7697 Structural
7698 Master
7699 Child
7700 on Layer
7701 on
7702 You did not select a layer.\n\nDo you wish to try again?
7703 Can not copy/move on the Internet layer.\n\nDo you wish to select another layer?
7712 Show All Items
7713 Edit Across Layers
7714 New Layer
7715 Show Object Properties
7716 Move Up
7717 Move Down
7718 Object Manager Options
7722 S&how Object Properties
7723 &Hide Object Properties
7936 Main
7937 Text Editing
8192 Add Current View
8193 Delete Current View
8194 View Pop-up menu
8195 Zoom In
8196 Zoom Out
8198 Zoom To Selected
8199 Zoom to All Objects
8203 Spreadsheet button
8204 Value text box
8205 View Pop-up menu
8224 Import Files
8225 Move %s Object
8226 Copy %s Object
8227 Create Link
8228 Cancel
8229 Drop %s
8230 Edit Bitmap
8231 Bitmap in
8246 NYI_PST_MENU
8249 Horizontal Mirror button
8250 Vertical Mirror button
8259 Straight Line
8260 Single Arc
8261 Double Arc
8262 Unconstrained
8263 Color Selector
8264 There isn't any text in this document!
8265 Place within line
8272 Place above line
8282 Place below line
8283 Place horizontally
8284 Place in center
8285 Start button
8286 End button
8287 Path button
8288 Direct Path button
8289 Clockwise Path button
8290 Counterclockwise Path button
8291 Direct Path button
8292 Clockwise Path button
8293 Counterclockwise Path button
8294 Light switch 1
8295 Light switch 2
8296 Light switch 3
8304 Fountain fill
8305 Two-color bitmap pattern fill
8306 Full-color pattern fill
8307 Bitmap pattern fill
8308 Texture fill
8309 Linear Fountain Fill
8310 Radial Fountain Fill
8311 Conical Fountain Fill
8312 Square Fountain Fill
8313 NYI_CM_NODE_CLOSE
8314 Add Node(s)
8315 Delete Node(s)
8316 Join Two Nodes
8317 Break Curve
8318 Extend Curve To Close
8319 Convert Line To Curve
8320 To Line button
8321 To Curve button
8322 Symmetrical Node button
8323 Align Nodes
8324 Auto-reduce Curve
8325 NYI_CM_NODE_MODE
8326 Stretch and Scale Nodes
8327 Rotate and Skew Nodes
8328 Extract subpath
8329 NYI_CM_NODE_MERGE_SUBPATH
8330 NYI_CM_NODE_ADD_SEGMENT
8331 NYI_STR_MENU
8332 NYI_LYR_MENU
8333 NYI_BR_POPUPMENU
8334 New Color Style
8335 New Child Color
8336 Edit Color Style
8337 Create Shades
8338 Auto Create Color Styles
8346 Copy Fill Here
8347 Copy Outline Here
8348 Copy All Properties
8384 Find Wizard
8385 Find and Replace Wizard
8386 Welcome to the %s.
8387 This Wizard will help you search through your drawing and find objects that have certain properties.
8388 It will then help you change the properties of the objects that it finds.
8389 Find
8390 Find and Replace
8391 Select the type of %s you want to find.
8392 Select how you would like to replace %s.
8393 Replace with:
8394 Recent Search
8400 Transparency
8401 Magnify
8402 Brighten
8403 Invert
8404 Color Limit
8405 Color Add
8406 Tinted Grayscale
8407 Heat Map
8408 Custom Color Map
8409 Wireframe
8410 Fish Eye
8448 Curves
8449 Rectangles
8450 Ellipses
8451 Polygons
8452 Text
8453 Artistic Text
8454 Paragraph Text
8455 Text on a Path
8456 Dimensions
8457 Linear Dimensions
8458 Angular Dimensions
8459 Call Outs
8460 Connector Lines
8461 Others
8462 Bitmaps
8463 OLE Objects
8464 3D Objects
8480 No Fill
8481 Uniform Color
8482 Special Fills
8483 Fountain Fill
8484 2-color Pattern
8485 Bitmap Pattern
8486 Full color Pattern
8487 Texture Fill
8488 PostScript Fill
8489 General Fill Color Model
8490 General Fill Color Palette
8512 No Outline
8513 Outline properties
8514 General Outline Color Model
8515 General Outline Color Palette
8528 CMY
8529 CMYK
8530 CMYK255
8531 RGB
8532 HSB
8533 HLS
8534 Lab
8535 YIQ
8536 Grayscale
8537 Registration Color
8538 Uniform Colors
8539 FOCOLTONE Colors
8540 PANTONE MATCHING SYSTEM« Colors
8541 PANTONE« Process Colors
8542 PANTONE« HEXACHROME (TM) Colors
8543 TRUMATCH Colors
8544 SpectraMaster Color
8545 TOYO COLOR FINDER
8546 DIC Colors
8547 Lab Colors
8560 Envelope
8561 Perspective
8562 Blend
8563 Extrude
8564 Contour
8565 Lens
8566 PowerClip
8567 Bitmap Color Mask
8568 Transparency
8569 Distortion
8576 Drop Shadow
8592 &Specify Properties for
8593 more than
8594 less than
8595 exactly
8596 Monochrome (1-Bit)
8597 16 Colors (4-Bit)
8598 GrayScale (8-Bit)
8599 256 Colors (8-Bit)
8600 RGB Color (24-Bit)
8601 CMYK Color (32-Bit)
8613 Corel BARCODE 6.0 Object
8614 Corel MOTION 3D Scene
8615 Corel PHOTO-PAINT 6.0 Image
8616 Corel SCRIPT 6.0 Script
8617 Corel Sticky Note
8618 CorelEquation! 1.0 Equation
8624 No Justification
8625 Left Justification
8626 Center Justification
8627 Right Justification
8628 Full Justification
8629 Forced Justification
8634 Click Next> to select Fills.
8635 Click Next> to select Outlines.
8636 Click Next> to select Effects.
8637 Click Next> to Review your search.
8638 There are no properties for this type of object.
8639 To be more specific, select an Object type from the list and specify its properties below.
8640 To be more specific, select a Special Fill from the list and specify its properties below.
8641 To be more specific, select an Effect from the list and specify its properties below.
8642 On
8643 Off
8644 Yes
8645 No
8646 To Center
8647 Inside
8648 Outside
8649 Uses lighting
8650 Does not uses lighting
8651 VP locked to object
8652 VP locked to page
8653 Shared Vanishing Point
8654 Rotated in 3D
8656 &Color:
8657 Rotatio&n:
8658 Fro&m:
8659 T&o:
8660 Out&line:
8661 F&ill:
8662 CorelDRAW has reached the end of this page.\n\nThe document has been modified, do you want to continue searching at the beginning?
8663 CorelDRAW has finished searching this page.
8664 CorelDRAW has finished searching this page. No objects were found.
8665 The object you selected is invalid.
8672 Paragraph Text Style
8673 Artistic Text Style
8674 Graphic Style
8675 Color Style
8676 Finish
8677 Next>
8678 Click Back to change your search.
8679 Click Edit to change your search.
8680 Click Edit to change or remove some parts of your search.
8681 One or more of the objects you want to find are within groups. Find All cannot\nselect objects that are within groups.\n\nWould you like to ungroup these groups?
8682 F&ind any
8683 Fi&nd a specific
8684 Object Types
8685 Fills
8686 Outlines
8687 Special Effects
8688 Any
8689 Specific
8690 with the following
8691 Palette Color Fills
8692 Color Fills
8693 Find the following Types of Objects:
8694 Find all objects:
8695 No objects or properties have been selected.
8696 Outline
8704 &Number of nodes
8705 P&olygon as Star
8706 &Type
8707 &Ellipse
8708 &Pie
8709 &Arc
8710 Angles
8711 C&lockwise
8712 Countercloc&kwise
8713 W&idth:
8714 Hei&ght:
8715 &Corner roundness:
8716 &Number of points:
8717 &Sharpness:
8718 &Polygon
8719 St&ar
8720 &Text:
8721 &Match case
8722 &Font:
8723 &Size:
8724 &Weight:
8725 &Alignment:
8726 &Underline:
8727 &Overline:
8728 Str&ikeout:
8729 &Placement:
8730 Text effe&ct:
8731 &Size
8732 St&yle:
8733 &Precision:
8734 Pr&efix:
8735 S&uffix:
8736 &Angle
8737 &Call Out text:
8738 &Bitmap type:
8739 &OLE object type:
8740 &Envelope type:
8741 &Style:
8742 &Offset:
8743 &Number of steps:
8744 Rainbo&w Contour:
8745 &Number of steps:
8746 Rotation &angle:
8747 Blend occurs along a &path:
8748 Rainbo&w Blend:
8749 &Depth:
8750 &Style:
8751 &Lighting:
8752 &Vanishing point and rotation:
8753 &Type:
8754 &Frozen:
8755 Style:
8756 Arrows:
8757 &Color:
8758 Be&hind fill:
8759 Sc&ale with image:
8760 &Line caps
8761 O&verprint fill:
8762 Overprint o&utline:
8763 Butted
8764 Round
8765 Square
8766 &Object name:
8767 &Style
8768 Style &name:
8769 Style &type:
8770 Color
8771 Find
8772 Select the object type that you want to find. Click on Fills, Outlines, or Special Effects to define your search further.
8773 Select 'Uniform Color' to find objects that contain a particular color fill, such as Red or Pantone 185. Select from the General Color Model or Palette lists to find all objects of the same color model or palette.
8774 Select 'Outline properties' to find objects having particular outline properties, such as color or width. Select from the General Color Model or Palette lists to find all objects of the same color model or palette.
8775 To include special effects in your search, select from the list on this page.
8776 &Bevel:
8777 &Type:
8778 Replace %s Properties...
8779 Select an Object Type, and specify the properties to be replaced.
8780 There are no properties to replace for this type of object.
8784 No Transparency
8785 Uniform Transparency
8786 Linear Transparency
8787 Radial Transparency
8788 Conical Transparency
8789 Square Transparency
8790 2-Color Pattern Transparency
8791 Full Color Pattern Transparency
8792 Bitmap Transparency
8793 Texture Transparency
8794 find overprinted outlines.fin
8795 find pantone fills.fin
8796 find pantone outlines.fin
8797 find scale with image off.fin
8798 find text with rgb fills.fin
8800 &Push and Pull
8801 &Zipper
8802 &Random
8803 &Smooth
8804 &Local
8805 &Twister
8864 CorelDRAW 8 Object Types
8865 Groups
8866 Rectangles
8867 Ellipses
8868 Curves
8869 Artistic Text
8870 Bitmaps
8871 Paragraph Text
8872 OLE Objects
8873 Polygons
8874 Linear Dimensions
8875 Angular Dimensions
8876 Connector Lines
8877 Callouts
8878 Guidelines
8880 Special Effects
8882 Blends
8883 Extrudes
8884 Powerlines
8885 Contours
8886 Clones
8887 Lenses
8888 PowerClips
8889 Perspectives
8890 Envelopes
8891 Distortions
8896 Fills
8897 Objects with no fill
8898 Uniform Fills
8899 Fountain Fills
8900 Postscript Fills
8901 2-Color Pattern Fills
8902 Bitmap Pattern Fills
8903 Full Color Pattern Fills
8904 Texture Fills
8912 Outlines
8913 No Outlines
8914 Create From
8915 Java Object
8916 Embedded Object
8960 No Selection
8961 Multiple Objects
8962 Group
8963 Curve or Connector
8964 Rectangle
8965 Ellipse
8966 Symmetrical Polygon
8967 Text
8968 Bitmap or OLE Object
8969 Blend
8971 Contour
8972 Dimension or Call Out
8973 Text on Curve/Object
8974 Edit curve, polygon & envelope
8975 Kerning text
8976 Editing text
8977 Knife and Eraser Tools
8978 Graph Paper and Spiral Tools
8979 Zoom Tool
8980 Interactive Uniform (Model Color) Fill
8981 Interactive Uniform (Palette Color) Fill
8982 Interactive 2 Color Fountain Fill
8983 Interactive Multi Color Fountain Fill
8984 Interactive Pattern Fill
8985 Interactive Texture Fill
8986 Interactive PostScript Fill
8987 Interactive Uniform Transparency
8988 Interactive Fountain Transparency
8989 Interactive Pattern Transparency
8990 Interactive Texture Transparency
8991 Interactive Distortion - Push and Pull Effect
8992 Interactive Distortion - Zipper Effect
8994 Envelope
8996 Pick Tool
8997 Zoom/Hand Tool
8998 Walk/Slide Tool
8999 Camera Rotation Tool
9000 3D Model Translation
9001 3D Zoom
9002 3D Slide
9003 3D Approach
9004 3D Pan
9005 3D Rotate
9006 3D Text
9007 3D Model Rotation
9008 Interactive Distortion - Twister Effect
9009 Interactive Drop Shadow
9013 Interactive Extrude - Color
9014 Interactive Extrude - Bevels
9015 Interactive Extrude - Lighting
9016 HTML Text
9017 Editing HTML text
9018 3D No Selection
9019 3D Translation Light
9020 3D Rotation Light
9021 Free Transform Tool
9022 3D Text Rotation
9023 HTML Form Object
9024 Natural Pen Tool
9216 Incorrect number of objects selected for this operation.
9217 The object ID provided for this operation is not available.
9218 This operation would cause the contour to be drawn off of the page.
9219 No layer has been selected.
9220 This operation can not be performed on a special layer.
9221 This operation can not be performed on a grid layer.
9222 The selected layer is not a TN layer.
9223 The specified layer does not exist.
9224 The operation can not be performed on a locked layer.
9225 The page layout type specified is invalid.
9226 Parameter #%d is not optional.
9227 Parameter #%d must be non-zero.
9228 The color model is invalid.
9229 Invalid values in passed parameters.
9230 Error Allocating Memory.
9231 The layer name has already been \nused.
9232 The artistic text should not be null.
9233 Error in retrieving text.
9234 Error in creating text.
9235 Invalid curve information.
9236 The specified layer is hidden.
9237 Unable to create envelope.
9238 Unable to open script file.
9255 Unable to setup the script envelope.
9256 The start node is out of range.
9257 The end node is out of range.
9258 Parameter #%d is out of range.
9259 Not enough free memory to perform this operation.
9260 Rotating parallel extrudes or extrudes with shared vanishing points is not allowed.
9261 The rotation parameters would result in an invalid rotation.
9262 Unable to create the recorder list.
9263 Error accessing the recorder list.
9264 Trying to select an object that has been deleted.
9265 The requested recorder object index does not exist.
9266 Unable to select an object that is inside a group.
9267 This command is reserved for use with the automation recorder.
9268 No preselected objects were recorded.
9269 Already in a recording - nested recordings are not supported.
9270 Already recorded preselected objects - nested recordings are not supported.
9271 No preselected objects have been stored.
9272 No recorder created objects to select from.
9273 Error: Unable to get printer device information.
9274 Error: Invalid printer paper type.
9275 Error: All parameters are mandatory for this operation
9276 Error in getting new fill
9277 Error in getting fill (object does not have a fill)
9278 Error in setting Fountain Fill color
9279 Error in deleting Fountain Fill color
9280 Error in getting the outline information
9281 Error: Invalid parameter value for position
9282 Error: Invalid file name for this operation
9283 Error: Invalid style name for this operation
9284 Error: Invalid layer name for this operation
9285 Are you sure you want to delete %s?
9286 Unable to rotate and extrude with a shared vanishing point
9287 Preset functionality has been superceded by automation recording. \nDo you wish to convert preset, '%s', \nto a COREL SCRIPT of the same name?
9288 Conversion to script is complete. \nDo you wish to delete preset, '%s', \nfrom your preset file?
9289 Converted from a DRAW PRESET binary to a DRAW RECORDING script
9290 Generated by DRAW's automation recorder
9291 Parameter #%d must be greater than zero.
9292 Error: Invalid MenuID parameter
9293 Error: Invalid ButtonID parameter
9294 Error: Invalid DialogID parameter
9295 The object selected is not a curve
9296 Need to call EndDrawArrow before beginning a new arrow
9297 Trying to add more arrow points than the amount reserved in BeginDrawArrow
9298 Need to BeginDrawArrow before this command
9299 The page orientation specified is invalid
9300 Invalid fountain fill color index
9301 There is already a recording in progress. Please stop the script manager and try this operation again
9302 Fill file '%s' for script not found.
9303 The two points cannot be identical
9304 An error occurred while working with guidelines
9305 Invalid guideline index
9306 Another script or script-based feature is currently running.\nCorelDRAW can only run one script at a time. Please try again when the other script finishes executing.
9307 Cannot run a script on Powerclip Contents. Edit contents first.
9308 Another CorelDRAW feature, script, or external application is\ncurrently accessing this document. Only one client can\naccess this document at once.
9309 Non-edit type operations will not be recorded while editing an object
9311 With snap to grid enabled, the grid frequency is too small to draw an object.\nPlease increase the grid frequency or disable snap to grid.
9312 The Hue of '%s' has been linked to '%s'.
9313 Color Style
9314 New Color Style
9315 Edit Color Style
9316 Child%d
9317 Child%d of %s
9318 Style%d
9319 Grayscale
9320 Edit Child Color
9321 Create a New Child Color
9322 The object(s) you have selected contains color(s) which are color styles. \nThey will not be re-added.
9323 You did not click on a color style.\n\nDo you wish to try again?
9324 CorelDRAW 8 - Select Parent Color Style
9325 A Color Style already exists with this name. If you wish to add another Color Style with the same color, please rename the existing color style.
9326 The ID of '%s' has been linked to '%s'.
9338 Too many objects selected.
9344 Cancel
9345 Undo 1 action
9346 Redo 1 action
9347 Undo %1!i! actions
9348 Redo %1!i! actions
9360 in
9361 mm
9362 picas
9363 points
9364 ciceros
9365 didots
9366 Page
9367 (none)
9368 SmallCaps
9369 AllCaps
9370 Normal
9371 Superscript
9372 Subscript
9472 Unable to initialize Writing Tools
9473 This tool was not found
9474 Unable to register document with Writing Tools
9475 Writing Tools
9476 Invalid entry in file CorelWT.cfg
9477 Tool Manager Window
9478 Tool Manager
9479 Unable to initialize tool. Please ensure all DLLs are present and registered.
9840 Error: The executable file is invalid
9841 Error: Out of memory
9842 Error loading TrueDoc library: 'CSR32D.DLL'.
9843 Error recording TrueDoc font.
9844 Error creating TrueDoc font.
9845 Error installing TrueDoc font.
9846 Error loading TrueDoc library: 'CSP32D.DLL'.
9984 File
9985 Name and location: %s
9986 File size: %3.2fMB (%ld bytes)
9987 Created: %s
9988 Modified: %s
9989 Accessed: %s
9990 Attributes: %s
9991 Read only
9992 Archive
9993 Hidden
9994 System
10000 Document
10001 Pages: %d
10002 Layers: %d
10003 Page size: %s (%s)
10004 Page orientation: %s
10005 Keywords: %s
10006 Notes: %s
10016 Graphic Objects
10017 There are no graphic objects in this document.
10018 Number of objects: %d
10019 Max. # of curve subpaths: %d
10020 Groups: %d
10021 Curves: %d
10022 Rectangles: %d
10023 Ellipses: %d
10024 Polygons: %d
10025 Linear dimensions: %d
10026 Angular dimensions: %d
10027 Call outs: %d
10028 Connector lines: %d
10029 Linked OLE objects: %d
10030 Embedded OLE objects: %d
10031 Number of points: %d
10032 Max. # of curve points: %d
10033 Guidelines: %d
10048 Text Statistics
10049 There are no text objects in this document.
10050 Paragraph text frames: %d
10051 Empty frames: %d
10052 Paragraphs: %d
10053 Artistic text: %d
10054 Lines: %d
10055 Words: %d
10056 Characters: %d
10057 TrueType fonts: %d
10058 Type 1 fonts: %d
10059 Fonts used:
10060 %s
10064 Bitmap Objects
10065 There are no bitmap objects in this document.
10066 Bitmaps: %d
10067 Embedded (%s - %d bits, %ld bytes)
10068 Externally linked (%s - %d bits, %ld bytes)
10069 Black and White
10070 CMYK
10071 Grayscale
10072 RGB
10073 Paletted
10074 Lab
10075 Duotone
10076 Drop shadow
10080 Styles
10081 There are no styles used in this document.
10082 Graphic (total): %d
10083 Artistic text (total): %d
10084 Paragraph text (total): %d
10085 Color style parents: %d
10086 Color style children: %d
10096 Effects
10097 There are no effects used in this document.
10098 Perspective: %d
10099 Envelopes: %d
10100 Blends: %d
10101 Extrudes: %d
10102 Bevels: %d
10103 Contours: %d
10104 PowerClips: %d
10105 Clones: %d
10106 Lens: %d
10108 Transparency: %d
10109 Magnify: %d
10110 Brighten: %d
10111 Invert: %d
10112 Color limit: %d
10113 Color add: %d
10114 Tinted grayscale: %d
10115 Heat map: %d
10116 Color custom map: %d
10117 Wireframe: %d
10118 Fish eye: %d
10119 Transparencies: %d
10120 Distortions: %d
10128 Fills
10129 There are no fill colors used in this document.
10130 No fill: %d
10131 Uniform: %d
10132 Fountain: %d
10133 Pattern: %d
10134 Texture: %d
10135 Postscript: %d
10136 Objects and Color models
10137 Color palettes
10138 %s: %d
10144 Outlines
10145 There are no outline used in this document.
10146 No outline: %d
10147 Uniform: %d
10148 Behind fill: %d
10149 Scaled with image: %d
10150 Hairlines: %d
10160 Document Information for : %s
10161 Page : %d
10162 Resolution: %u dpi
10170 Convert To GrayScale
10171 Convert To LAB
10172 Convert To Black and White
10173 Convert To Paletted
10174 Resample
10176 Brightness-Contrast-Intensity
10177 Color Balance
10178 Gamma
10179 Hue-Saturation-Lightness
10180 Invert
10181 Posterize
10182 Edge Detect
10183 Wet Paint
10184 Pixelate
10185 Solarize
10186 Add Noise
10187 Remove Noise
10188 Sharpen
10189 UnSharpen
10190 Convert To RGB
10191 Convert To CMYK
10192 PlugInFilters
10193 Dirs
10194 LetPluginDoDisplay
10195 FileExtensions
10196 ,;
10197 *.dll,*.8b?,*.eff
10198 Searching for plug-ins...
10199 Not Installed
10201 Plug-in effect
10202 Square
10203 Round
10204 Line
10205 Cross
10206 Fixed 8x8
10207 Fixed 4x4
10218 Template Wizard
10219 &Which type of %s would you like to create?
10220 document
10221 There are no templates in this category.
10222 CorelDRAW template
10223 PaperDirect template
10224 Black and White (1-bit)
10225 16 Colors (4-bit)
10226 Paletted (8-bit)
10227 Grayscale (8-bit)
10228 RGB Color (24-bit)
10229 CMYK Color (32-bit)
10230 300 dpi
10231 200 dpi
10232 150 dpi
10233 75 dpi
10234 Invalid resolution, please enter a number between 60 and 600
10235 You are about to convert a control object, this will remove the %s. Do you want to continue
10236 Convert to Bitmap Warning
10237 effect
10239 The generated fonts created using the TrueDoc technology are distributed only for the purpose of rendering and viewing the original document. Corel does not condone and does not authorize or allow such regenerated fonts to be used for any other purpose.
10240 Glass Block
10241 Impressionist
10242 Vignette
10243 Psychedelic
10244 Smooth
10245 Gaussian
10246 Pinch\Punch
10247 Motion
10248 Map to Object
10249 Emboss
10256 Pagecurl
10257 3D Rotate
10258 Perspective
10259 Swirl
10260 Offset
10261 Convert To Duotone
10287 dpi
10288 Not enough virtual memory for Enhanced view.\nSwitching to Normal view.
10309 CD #3
10310 CD #2
10320 c%d
10321 All Settings in this file can be changed within
10322 CorelDRAW. This file should not be altered by the user.
10323
10324 See the REFERENCE section in CorelDRAW's On-Line Help
10325 for more information.
10336 Tab%d
10337 1,1,Browse,.\Samples
10338 3,5,Clipart,ClipArtCD
10339 2,2,Photos,PhotosCD
10340 4,7,3D Models,PhotosCD, .\3DModels\3dmf
10341 7,6,Favorite Fills and Outlines,.\Fill_Out
10342 9,9,Ftp Sites,.\Net_Fav\Links
10352 FileName%d
10353 .\find\find pantone fills.fin
10354 .\find\find pantone outlines.fin
10355 .\find\find overprinted outlines.fin
10356 .\find\find scale with image off.fin
10357 .\find\find text with rgb fills.fin
10358 Name
10359 Notes
10373 Presets
10374 Scripts
10375 Directory %s was not found.\nDefaulting to the Desktop.
10376 Desktop
10384 Scale factor cannot be set to 0.
10385 Invalid Size.
10386 Virtual memory is running low.\nAmount of free memory detected: %d megs\nMinimum amount of memory required: %d megs\n\nPlease free up some memory before continuing by:\n-closing any unneeded applications\n-increasing the amount of free disk space on the swapfile drive\nand/or\n-increasing the virtual memory limit in Window's System Properties settings
10387 The file you are attempting to load was created by a previous unsupported version of CorelDRAW and therefore may not load correctly.
10388 CorelDRAW has detected a change in the system color palette.\nTo ensure the best display, please shut down and re-start CorelDRAW.
10496 Outline: %s %s %s
10497 Outline: %s Hairline
10501 C:%d M:%d Y:%d K:%d
10502 C:%d M:%d Y:%d
10503 L:%.1f a:%.1f b:%.1f
10504 R:%d G:%d B:%d
10505 H:%d L:%d S:%d
10506 H:%d S:%d B:%d
10507 Y:%d I:%d Q:%d
10508 G:%d
10509 Registration Color
10512 .\Scripts
10513 CdrCpr80.dll could not be found in the programs directory.
10514 ..\tutors\drwtutor.exe
10528 Graphic
10529 Fill
10530 Outline
10531 Resulting bitmap may be too large. Do you want to continue
10532 CorelDRAW 8 - Resample
10533 Resulting bitmap may be too large. Do you want to continue
10566 No profile has been selected in the Color Manager to handle CMYK conversions.
10567 The following profile is selected in the Color Manager to handle CMYK conversions: %s.
10568 CorelDRAW 8 - Warning
10569 Revert %s to last saved version,\nand lose all current changes?
10570 Cannot Revert to last Saved File.\nFile %s not found.
10577 An error occurred while applying distortion
10580 _PAGE
10581 Could not add Bookmark
10582 The Bookmark '%s' is already in use.\n\nPlease use another name.
10583 Use Object's Shape.
10584 Use Object's Bounding Box.
10585 More...
10586 Page
10587 Bookmark
10588 Page
10589 Top Of Page
10592 blend
10593 extrude
10594 power line
10595 contour
10596 bevel
10597 shadow
10608 The HTML folder is missing.
10609 The folder %1 does not exist. Do you want to create it?
10610 An error occurred creating the folder %1
10611 Page
10612 Title (Page Name)
10613 File name
10614 Export of %1 failed.
10615 The file %1 already exists. Do you want to replace it?
10616 Images\
10617 An error occurred adding the font '%1' to the TrueDoc(TM) file.
10618 Error loading TrueDoc library: %1.
10619 At least one domain is required for TrueDoc(TM) Fonts to be available in a Web page.\nDo you want to use TrueDoc(TM) ?
10620 The generated fonts created using the TrueDoc technology are distributed only for the purpose of viewing the original Web page. Corel does not condone and does not authorize or allow such regenerated fonts to be used for any other purpose.
10624 Script canceled by user.
10625 Unable to load symbol.
10626 Error: Invalid Handle parameter
10627 Error: Invalid LensType parameter
10628 Error: Guideline not found
10629 Error: Change case operation failed
10630 Error: Change case operation failed
10631 Error: Invalid filter ID parameter
10632 Error: Filter does not support specified bit depth
10633 Error: File already exists, overwrite not specified
10634 Error: Full color fill bounding box is required
10640 DRAW OPEN File Dialog
10641 DRAW SAVE File Dialog
10642 Maintain layers and pages
10643 Version 8.0
10644 Version 7.0
10645 Version 6.0
10646 Version 5.0
10647 The generated fonts created using the TrueDoc technology are distributed only for the purpose of rendering and viewing the original document. Corel does not condone and does not authorize or allow such regenerated fonts to be used for any other purpose.
12032 \n\nTIP: You currently have the 'Use Offscreen Image' option enabled.\nDisabling this option will free resources, but will lower the display performance.
12048 Unknown error
12049 Cannot find the Java class file on disk
12050 Text properties are not HTML compatible, will be converted to bitmap
12051 Object intersects with one or more other objects
12052 The externally linked bitmap file can not be found
12053 The object has a transformation (scale, rotate or skew)
12054 Text object is not HTML compatible, will be converted to bitmap
12055 One or more objects are off the page, objects will be cut-off or ignored
12056 Cannot find the CGI Script file for form objects
12058 Verify Publish To Internet
12059 Check for object intersections on Internet layer
12060 Check text for HTML compatibility
12061 Check links to externally linked bitmap files
12062 Check links to Java applets && embedded files
12063 Check for transformations on Internet objects
12064 Check for objects off page
12065 Check for presence of form CGI Script file
12286 Publish To Internet
12287 Potential conflicts were found in this document while Publishing to Internet.\nDo you want to fix them?\n\nClick Yes to open the HTML Conflict dialog and fix the conflicts.\nClick No to ignore the conflicts and proceed with Publishing to Internet\n
12288 %s separation
12289 Page %d
12290 Default
12291 Printer paper orientation does not match document.\n\nAdjust printer automatically?
12292 Unable to create printing resource lists.
12293 Unable to write %s.
12294 Unable to allocate memory.
12295 No printers have been installed.
12296 %d %% Complete
12297 Composite
12298 Tile %d of %d
12299 Band %d
12300 Disabled
12301 Analyzing Document...
12302 Even & Odd
12303 Even Pages
12304 Odd Pages
12305 %d spot color separations are about to be output. Are you sure you want to continue?
12306 Spot Color Separations Warning:
12307 If any spot colors are used
12308 If more than 1 spot colors used
12309 If more than 2 spot colors used
12310 If more than 3 spot colors used
12312 Left & Right
12313 Left Pages
12314 Right Pages
12315 &Maximum:
12316 Wi&dth:
12317 No printers have been installed. Do you like to add one?
12320 There is an object with a very complex outline.
12321
12322 Outlines with more than 500 nodes may cause limitcheck errors
12323 on Level 1 PostScript devices. It would be best to redesign
12324 such objects so that fewer nodes are necessary.
12325
12326
12327
12328
12329
12330 Locate external bitmap
12331 Transparency in the document is complex and computation could be lengthy.\nSubstitute a faster but less accurate approach (recommended)?
12332 COMPLEX TRANSPARENCY
12336 There is an object with a complex fill and a complex outline.
12337
12338
12339 Objects with more than 300 nodes that contain complex
12340 fills may cause limitcheck errors on Level 1 PostScript
12341 devices. It would be best to redesign such objects so
12342 that fewer nodes are necessary.
12343
12344
12345
12352 There is a clipping path (e.g., a Lens or PowerClip) that
12353 contains many nodes.
12354
12355 Complex clipping paths may cause limitcheck errors on
12356 Level 1 PostScript devices. It would be best to redesign
12357 such clipping paths so that they use as few nodes and
12358 subpaths as possible.
12359
12360
12361
12368 There is an object with multiple subpaths that contains a
12369 texture fill.
12370
12371 Objects comprised of multiple subpaths that contain
12372 texture fills may cause limitcheck errors on Level 1
12373 PostScript devices. These objects should be redesigned so
12374 that only one curve, with no subpaths, exists.
12375
12376
12377
12384 There is a clipping path (e.g., a Lens or PowerClip), with
12385 multiple subpaths, that contains a bitmap.
12386
12387 Bitmaps inside complex clipping paths may cause limitcheck
12388 errors on Level 1 PostScript devices. These objects should
12389 be redesigned so that only one curve, with no subpaths,
12390 exists.
12391
12392
12393
12400 There is a text object that contains a texture fill.
12401
12402 Text objects that contain texture fills may cause
12403 limitcheck errors on Level 1 PostScript devices. This is
12404 because multiple subpaths are usually necessary in order to
12405 render text objects.
12406
12407
12408
12409
12416 There is a linear fountain fill that will likely show
12417 banding on output.
12418
12419 The following actions can eliminate banding:
12420
12421 ╖ reduce the length of the fountain fill
12422 ╖ increase the number of fountain steps
12423 ╖ increase the range of color in the fill
12424 ╖ output to a higher resolution
12425 ╖ output using a lower screen frequency
12432 Layout
12433 Separations
12434 Options
12435 Special
12440 Cyan
12441 Magenta
12442 Yellow
12443 Black
12444 Color
12445 Frequency
12446 Angle
12447 Overprint
12449 Standard Defaults
12450 No PostScript screen sets found in CORELPRN.INI!
12451 Unable to locate the file %s in the data directory \nor the custom directory!\n
12452 Default
12453 Dot
12454 Line
12455 No colors were chosen for separation!
12456 Number of fountain steps must be between 0 and %d inclusive!
12462 Some values are invalid. Make sure that values are\npositive and that angles do not exceed 360 degrees
12463 The value entered for the angle is invalid.\nMake sure it is between -360 and 360 degrees.\n
12464 The value entered for the frequency is invalid,\nMake sure it is a positive number.\n
12465 Print Job Info Sheet to Text File
12467 Text File (*.txt)|*.txt|All Files (*.*)|*.*||
12468 Print Job Info Sheet
12470 Print Job Info File (*.pji)|*.pji|All Files (*.*)|*.*||
12473 High
12474 Medium
12475 Low
12476 Draft
12477 The character '%c' cannot be used in the range of page numbers to be printed.
12478 You must specify at least one valid page number to be printed.\nCheck your page range and even/odd pages setting.
12485 %s%5.1f x %5.1f Millimeters
12486 %ld dpi
12487 %ld dpi x %ld dpi
12488 (%s)
12489 %s%ld dpi
12490 %s%3.4f Inches
12491 %s%3.4f x %3.4f Inches
12492 %s%3.3f Points
12493 %3.3f Points
12561 Print Job Information:
12562 Application Information
12563 Filename:
12564 Application:
12565 Version:
12567 Device Name:
12568 Driver Information
12569 Driver Name:
12570 Driver File:
12571 Resolution:
12572 Job Information
12573 Mode:
12574 Invert:
12575 Mirror:
12576 AutoFlatness:
12577 AutoSpreading:
12578 Fountain Steps:
12579 For Macintosh:
12580 Color Profile:
12581 Screen Frequency:
12582 Bleed Limit:
12583 Crop Marks:
12584 Registration Marks:
12585 File Information:
12586 Densitometer Scale:
12587 Calibration Bar:
12588 Copies:
12589 Separation Information
12590 %s:
12593 Flatness:
12594 Maximum Spread:
12595 Text Above:
12596 Font(s)
12597 Font(s) Required
12598 Font(s) Supplied
12599 OPI Linked Images
12600 None
12601 Yes
12602 No
12603 Enabled
12604 Disabled
12605 Separations
12606 No
12607 Yes
12608 No
12609 Yes
12610 See Separation Information
12611 degrees
12612 lpi
12613 UNKNOWN
12614 Landscape
12615 Portrait
12616 N/A
12617 Do not know where to output the sheet.\n Go into Info Settings and specify a destination\n
12618 Printer Default
12619 PostScript Level:
12620 Bitmap Color Space:
12621 Auto Increase Fountain Steps:
12622 Optimize Fountain fills:
12623 Current Selection:
12624 Bitmap Printing:
12625 Output Entire Bitmap
12626 Output in 64K Chunks
12627 Preview Image Default:
12628 Off At Startup
12629 On At Startup
12630 Bitmap Font Limit (PS):
12631 Bitmap Font Size Threshold (PS):
12632 Overprint Black Threshold (PS):
12633 Fill Clipping:
12634 Use Driver Clipping For Fills
12635 Use Software Clipping For Fills
12636 Grayscale Driver Bitmap Output (PS):
12637 Send Color Bitmaps As Color
12638 Send Color Bitmaps As Grayscale
12639 PostScript 2 Stroke Adjust (PS):
12640 Off
12641 On
12642 Registration Mark Type:
12643 Standard Bullseye
12644 Half Inverted Bullseye
12645 Square and Circle
12646 Elongated Bullseye
12647 Driver Banding:
12648 Let Driver Handle Banding
12649 Send Bands to Driver
12650 Corel Logo
12651 Print Preview Drag Mode:
12652 Drag Marquee
12653 Drag Full Image
12654 Page Orientation Warning:
12655 Off
12656 On
12657 Composite Crop Marks (PS):
12658 Output in Black Only
12659 Output in CMYK
12660 Text Output Method:
12661 All Text as Graphics
12662 Text as Text When Possible
12663 Conform to DSC (PS):
12664 Off
12665 On
12666 Resolve DCS Links (PS):
12667 Leave DCS Links Unresolved
12668 Substitute Plates at Print Time
12669 Bitmap Chunk Overlap Pixels:
12670 Default To Fast Mode
12671 &Help
12672 Unable to read print styles database; print styles will not be available.
12673 Limit on number of print styles has been reached; unable to add another style.
12674 The print style:\n\n %s\n\nalready exists. Do you wish to update it with new settings?
12675 Unable to save print style. Please ensure that CORELPRN.INI has read/write access.
12676 Cannot remove style:\n\n %s\n\nStyle does not exist.
12677 You are about to delete the print style: %s\n\nDo you wish to proceed?
12678 Unable to remove style:\n\n %s
12679 You must enter a valid name for the style in order to save it.
12681 %s Defaults
12682 Unable to load the specified print style.
12683 Insufficient memory or system resources to carry out this operation.\nClose some applications and try again.
12684 Custom (Current settings not saved)
12717 Print to File:
12718 Fixed Spread:
12774 Job Information Sheet Settings
12775 Advanced Separations Settings
12776 Layout Settings
12777 Separations Settings
12778 Prepress Settings
12779 Miscellaneous Settings
12780 Proofing and Color Settings
12781 PostScript Settings
12782 Fixed Auto Spreading
12783 Auto Trapping Settings
12784 Center Page
12785 Fit to Page
12786 Maintain Aspect Ratio
12787 Print Tiled Pages
12788 Signature Layout
12789 N-up Format
12790 Tile Overlap
12792 Print Separations
12793 Print Separations in Color
12794 Convert Spot Colors to CMYK
12795 Print Empty Plates
12796 Print File Information
12797 Position File Info Within Page
12798 Print Crop Marks
12799 Exterior Crop Marks Only
12800 Print Registration Marks
12801 Color Calibration Bar
12802 Densitometer Scales
12803 Invert
12804 Mirror
12805 Print Job Information Sheet
12806 Always Overprint Black
12807 Auto Spreading
12808 Auto Spread Maximum
12809 Auto Spread Text
12810 Fountain Steps
12811 Width Scale Factor
12812 Height Scale Factor
12813 Job Info Sheet Contents
12814 Job Info Sheet Location
12815 Bleed Amount
12816 Print Vectors
12817 Print Bitmaps
12818 Print Text
12819 Print All Text in Black
12820 All Colors Black
12821 Fit Marks and Layout to Page
12822 Maximum Points per Curve
12823 Curve Flatness
12824 Auto Increase Flatness
12825 Complex Object Warnings
12826 Download Type 1 Fonts
12827 Convert True Type to Type 1
12828 PostScript Level
12829 Auto Increase Fountain Steps
12830 Optimize Fountain Fills
12831 Banded Fountain Fill Warnings
12832 Output Color Bitmaps in RGB
12833 Maintain OPI Links
12834 Print Page Numbers
12835 Screening
12836 Halftone Type
12837 Hexachrome Plates
12838 Apply Settings to All Pages
12839 Screen Frequency
12840 High Solid Ink Density
12841 Densitometer Densities
12842 Job Name / Slug Line
12843 Bounding Box
12844 Use JPEG Compresssion
12845 JPEG Quality Factor
12846 Too Many Spot Colors Warning
12847 Too Many Fonts Warning
12858 You are about to delete the style: %s\n\nDo you wish to proceed?
12864 Full Page
12865 Book
12866 Booklet
12867 Tent-Card
12868 Side-Fold Card
12869 Top-Fold Card
12870 Tri-Fold Card
12871 As in document (%s)
12872 Double Sided Full Page
12879 Error loading %s.
12896 Ready
12897 Paused
12898 Error
12899 Pending Deletion
12900 Paper Jam
12901 Paper Out
12902 Manual Feed
12903 Paper Problem
12904 Offline
12905 I/O Active
12906 Busy
12907 Printing
12908 Output Bin Full
12909 Not Available
12910 Waiting
12911 Processing
12912 Initializing
12913 Warming Up
12914 Toner Low
12915 No Toner
12916 Page Punt
12917 User Intervention Required
12918 Out Of Memory
12919 Door Open
12920 Server Unknown
12921 ;
12922 Default printer
12923 %d documents waiting
12924 1 document waiting
12933 PagePath Section
12934 Refeed this stack with this sheet
12935 in the direction of the arrow.
12936 Use the smaller arrow if your printer feeds the paper along the long edge.
12937 FACE UP
12944 FACE DOWN
12945 The first side of your print job is being printed.\n\nWhen the printer is finished, follow the instructions on top of the stack of printed sheets.\n\nOnce you have done this, click OK to print the second side.
12946 The first side of your print job is being printed.\n\nWhen the printer is finished, refeed the stack for printing on the second side. The stack should be fed %s, with the %s edge that came out of the printer facing into the paper feed.\n\nOnce you have done this, click OK to print the second side.
12947 face up
12948 face down
12949 first
12950 last
12960 RGB
12961 CMYK
12962 Page Numbers:
12963 Client Information
12964 Client Name:
12965 Company Name:
12966 Mailing Address:
12967 Phone Number:
12968 Fax Number:
12969 Email Address:
12970 Job Name:
12971 Job Comments:
12972
12975 Documents to print
12976 C&urrent page
12977 C&urrent slide
12978 C&urrent thumbnail
12979 C&urrent frame
12980 C&urrent handout
12984 Pa&ges:
12985 Sl&ide&s:
12986 Thumbna&ils:
12987 Fr&ames:
12988 H&andouts:
12992 &Apply settings to all pages
12993 &Apply settings to all slides
12994 &Apply settings to all thumbnails
12995 &Apply settings to all frames
12996 &Apply settings to all handouts
13000 &Pages per sheet:
13001 Slides &per sheet:
13002 Thumbnails &per sheet:
13003 Frames &per sheet:
13004 Handouts &per sheet:
13008 Style name cannot be empty.
13009 0░
13010 180░
13011 Front frame
13012 Back frame
13013 Unable to access printer driver.Try removing and reinstalling this printer driver.
13014 The Position style:\n\n %s\n\nalready exists. Do you wish to update it with new settings?
13015 The style:\n\n %s\n\nalready exists. Do you wish to update it with new settings?
13016 Manual Double-Sided Printing
13017 You are printing a double-sided layout on a non-duplexing printer.\n\nChoose Yes to be prompted when to flip the paper to duplex manually.\nChoose No to disable the prompts and print on one side only.\n
13018 The left and top bounding box positions must be smaller than the right and bottom positions
13019 Note that this action will reset any changes you have made to the image positions or the list of separation colors in Print Options or Print Preview.
13020 Note that this action will reset any changes you have made to the list of separation colors in Print Options or Print Preview.
13022 This is the name of a built-in style that cannot be changed.
13131 Plate: %d of %d
13132 Preparing document fonts
13133 Color profile:
13134 %.5g lpi at %.5g degrees
13136 Default screen
13137 Composite
13152 No Error
13153 Unknown Error
13154 Out Of Memory
13155 Invalid Parameters
13156 Could Not Write Output
13157 Could Not Create Command Block
13158 No Output Stream Specified
13159 Could Not Read Input
13160 Invalid Block Type
13161 String Too Large
13162 No Graphics State Available
13163 No Graphics Vector Fill Available
13164 No Text Block Available
13165 No Printing State Available
13166 No Printer Vector Fill Available
13167 Invalid Parameter To Print Routine
13168 No Text Block Available
13169 Cannot Print Outside of Text Block
13264 Page %d
13265 Slide %d
13266 Thumbnail %d
13267 Frame %d
13268 Handout %d
13272 Page Size:
13273 Slide Size:
13274 Thumbnail Size:
13275 Frame Size:
13276 Handout Size:
13280 Page Orientation:
13281 Slide Orientation:
13282 Thumbnail Orientation:
13283 Frame Orientation:
13284 Handout Orientation:
13290 %s%3.4f %s
13291 %s%3.4f x %3.4f %s
13292 %3.4f x %3.4f %s
13293 %3.4f %s
13296 Full Page
13297 Book
13298 Booklet
13299 Tent-Card
13300 Side-Fold Card
13301 Top-Fold Card
13302 Tri-Fold Card
13303 Manual
13304 Clipping factors:
13305 Scale factor:
13307 User Defined
13308 Cannot Open File
13309 Form Already Exists OverWrite?
13312 &Printer Capabilities
13313 Device Mode Information:
13314 Device Name:
13315 Version Number:
13316 Printer Driver Version:
13317 Size:
13318 Driver Extra:
13319 Fields:
13320 Orientation:
13321 Portrait
13322 Landscape
13323 Paper Size:
13324 Paper Length:
13325 Paper Width:
13326 Scale (%):
13327 Copies:
13328 Default Source:
13329 Print Quality:
13330 High
13331 Medium
13332 Low
13333 Draft
13334 Color:
13335 On
13336 Off
13337 Duplex:
13338 Simplex
13339 Horizontal
13340 Vertical
13344 Y Resolution:
13345 TrueType Options:
13346 Prints TT as Graphics
13347 Downloads TT Fonts as Soft Fonts
13348 Substitutes Device Fonts for TT
13349 Collate:
13350 True
13351 False
13352 From Name:
13353 Pixels (per logical inch):
13354 Color Resolution (in bits per pixel):
13355 Width (in pixels):
13356 Height (in pixels):
13357 Device's display mode:
13358 Text mode
13360 Frequency (htz):
13361 ICM Handled:
13362 Disabled:
13363 Windows:
13364 Device Driver:
13365 Destination Device:
13366 Color Matching Methods:
13367 Optimize for Color Saturation:
13368 Optimize for Color Contrast:
13369 Optimize to Match the Exact Color:
13370 Media Type:
13371 Plain Paper:
13372 Glossy Paper:
13373 Transparent Film:
13374 Dither Type:
13375 Non
13376 A Coarse Brush
13377 A Fine Brush
13378 Line Art Dithering
13379 Grayscale
13380 Device Capabilities:
13381 Device Type:
13382 PostScript
13383 Non-PostScript
13384 Device Technology:
13385 Vector Plotter
13386 Raster Display
13387 Raster Printer
13388 Raster Camera
13389 Character Stream
13390 Metafile
13391 Display File
13392 Physical Width (mm):
13393 Physical Height (mm):
13394 Width of the Screen (pixels):
13395 Height of the Screen (raster lines):
13396 Number of Pixels Hor (logical inch):
13397 Number of Pixels Ver (logical inch):
13398 Color Bits (pixel):
13399 Color Planes (pixel):
13400 Device-Specific Brushes:
13401 Device-Specific Pens:
13402 Device-Specific Fonts:
13403 System Colors:
13404 Relative Pixel Width:
13405 Relative Pixel Height:
13406 Relative Pixel Diagonal Width:
13407 Reserved:
13408 Entries in System Palette:
13409 Reserved Entries in System Palette:
13410 Color Resolution:
13411 Physical Width (device units):
13412 Physical Height (device units):
13413 Horizontal Physical Printable Area:
13414 Vertical Physical Printable Area:
13415 Horizontal Scaling Factor:
13416 Vertical Scaling Factor:
13417 Vertical Refresh Rate:
13418 Width of the Virtual Desktop (pixels):
13419 Height of the Virtual Desktop (pixels):
13420 Horizontal Drawing Alignment:
13421 Clipping Capabilities:
13422 Clip Output to Rectangle
13424 Raster Capabilities:
13425 Requires Banding Support
13426 Transfer Bitmaps
13427 Support Bitmaps Larger than 64K
13428 Supports SetDIBits and GetDIBits
13429 Supports SetDIBits To Device
13430 Flood Fills
13431 Support Windows 2.0 Features
13432 Specifies a Palette-Based Device
13433 Capable of Scaling
13434 Supports StretchBlt
13435 Supports StretchDIBits
13436 Curve Capabilities:
13437 Does not Support
13438 Draw Circles
13439 Draw Pie Wedges
13440 Draw Chord Arcs
13441 Draw Ellipses
13442 Draw Wide Borders
13443 Draw Styled Borders
13444 Draw Wide Styled Borders
13445 Draw Interiors
13446 Draw Rounded Rectangles
13447 Line Capabilities:
13448 Not Supported
13449 Draw A Polyline
13450 Draw a Marker
13451 Draw Multiple Markers
13452 Draw Wide Lines
13453 Draw Styled Lines
13454 Draw Wide and Styled Line
13455 Draw Interiors
13456 Polygon Capabilities:
13457 Not Supported
13458 Draw Alternate-fill Polygons
13459 Draw Rectangles
13460 Draw Winding-fill Polygons
13461 Draw Single Scan Line
13462 Draw Wide Borders
13463 Draw Styled Borders
13464 Draw Wide and Styled Borders
13465 Draw Interiors
13466 Text Capabilities:
13467 Capable of Character Output Precision
13468 Capable of Stroke Output Precision
13469 Capable of Stroke Clip Precision
13470 Capable of 90-degree Character Rotation
13472 Capable of Any Character Rotation
13473 Scale in X and Y Direction
13474 Capable of Doubled Character for Scaling
13475 Uses Integer Multiples for Scaling
13476 Uses Multiples for Exact Scaling
13477 Draw Double-Weighted Characters
13478 Italics
13479 Underline
13480 Draw Strikeouts
13481 Draw Raster Fonts
13482 Draw Vector Fonts
13483 Must be Zero
13484 Can not Scroll using Bit-Block Transfer
13485 Yes
13486 No
13488 Saves current print settings in the current print style
13489 Saves current print settings as a new print style
13490 Deletes the current print style
13491 Prints all or part of the document
13492 Immediately prints the current sheet only
13493 Chooses printer to use and/or changes printer properties
13494 Closes print preview, returning to edit mode
13495 Exits the application and prompts to save changes
13496 Overrides preview type to show a composite image of all colors on each sheet
13497 Overrides preview type to show color separations that will be printed for each sheet
13498 Shows only a specific color separation for each sheet
13499 Represents the image to be printed by a gray bounding box
13500 Quickly shows a rough approximation of the image to be printed
13501 Draws a more accurate version of the image to be printed
13502 Overrides preview type to show how sheets would appear if printed in color
13503 Overrides preview type to show how sheets would appear if printed in grayscale
13504 Shows or hides the edge of the printable area for the current printer
13505 Shows or hides boundaries between pages when print tiled pages is on
13506 Shows a fold at the upper right corner of the page
13507 Shows or hides handles that can be used to move or resize the image
13508 Shows or hides the main print preview toolbar
13509 Shows or hides the status bar
13510 Shows or hides the rulers
13511 Shows the current view in full-screen preview mode
13512 Changes the current zoom (magnification) setting
13513 Jumps to a specific location in the document
13514 Resizes or repositions image(s) to be printed
13515 Edits page layout
13516 Edits rows and colums of pages
13517 Changes basic color separation settings
13518 Changes advanced screening parameters
13519 Changes miscellaneous print options
13520 Turns on or off printer's marks and other prepress settings
13521 Changes PostScript-specific settings
13522 Sets up a job information sheet to be printed with the document
13523 Sets up double-sided printing on a single-sided printer
13524 Opens the search dialog box, which searches for help on a specific topic
13525 Invokes context-sensitive help
13526 &Close
13527 Print
13528 Print Options
13529 Close Print Preview
13530 Print Style
13531 Save Print Style As
13532 Delete Print Style
13533 Pick Tool
13534 Zoom Tool
13535 Zoom Factor
13536 Full Screen
13537 Layout
13538 Separations
13539 Help
13540 Previous Sheet
13541 Next Sheet
13542 Mirror
13543 Invert
13544 Densitometer Scales
13545 Color Calibration Bar
13546 Registration Marks
13547 Crop Marks
13548 Page Numbers
13549 File Information
13550 Close
13551 You must specify at least one valid chapter number to be printed.
13552 &Options...
13553 You must specify at least one valid page number to be printed.\nCheck your page range and left/right pages setting.
13554 &Print... Ctrl+P
13555 &Print Ctrl+P
13556 %d%%
13557 To Page
13558 To Width
13559 To Height
13560 To Selected
13561 To Fit
13562 AaBbCcDdEeXxYyZz
13563 (Print Preview)
13564 Page %d
13565 Sheet %d
13566 Front
13567 Back
13568 -
13569 PANTONE
13570 PMS
13571 CV
13572 Seps
13573 Composite
13574 CMYK
13575 Hexachrome
13576 &
13577 Spot
13578 Printer:
13579 Composite
13580 (%s)
13581 Sheet
13582 Side
13583 Plate
13584 Page(s)
13585 %d of %d
13586 ,
13587 No pages are selected for printing.
13588 No plates matching the View|Plate setting are selected for printing.
13589 Color Separations To Print
13590 Currently Selected Printer
13591 PostScript Printer
13592 Color Printer
13593 Grayscale Printer
13594 Width: %s Height: %s Position: (%s, %s)
13595 Scale: %.lf%%
13596 Scale: (%.lf%%, %.lf%%)
13597 Selection:
13598 None
13599 ,
13600 Positive Image / Emulsion Up
13601 Positive Image / Emulsion Down
13602 Negative Image / Emulsion Up
13603 Negative Image / Emulsion Down
13604 %s Densitometer Scale
13605 Toolbar
13606 Prepress Bar
13607 Shows or hides the toolbar with printers marks and prepress settings
13608 Shows or hides the bounding box which printer's marks are aligned to
13612 Automatically sets the preview type to match what will be printed
13613 Displays program information and copyright
13614 Non-PostScript Printer
13615 PostScript Printer - AdobePS Driver
13616 No
13617 Color Separations Are Off
13618 Current Selection
13619 Color Printer - Grayscale Mode
13620 Preview of duotone separations is not supported
13762 The current settings for this document will cause %d fonts to be\ndownloaded to the printer. This could overrun memory and prevent\nthe page(s) from printing.\n\nAre you sure you want to continue?
13763 Not configured
13764 Not configured for composite
13765 Not configured for separations
13766 No color profile has been setup for separations. Use Corel Color Manager to configure a separations profile.
13767 Preview Color Default:
13768 Auto (Simulate Output)
13769 Color
13770 Grayscale
13771 Preview Separations Default:
13772 Auto (Simulate Output)
13773 Composite
13774 Off
13776 Prepare For Service Bureau Wizard
13777 %s is currently gathering linked image files used by your graphic.
13778 %s is currently assembling information about your graphic.
13779 %s is currently creating a %s file.
13780 %s is currently printing your graphic to a .PRN file.
13781 The gathering of files for your service bureau was not completed.
13782 \n\nIf you wish to change any of your previous settings or try again, click Back. Click Cancel if you wish to exit the Prepare For Service Bureau Wizard.
13783 UserName
13784 CompanyName
13785 MailingAddress
13786 PhoneNumber
13787 FaxNumber
13788 EmailAddress
13789 PrepareForServiceBureauWizard
13791 Corel Service Bureau Profiles (*.csp)
13792 Browse Service Bureau Profiles
13793 Choose Location
13795 Folder (*.*)
13798 The location you specified could not be found or created.\n\nClick back to select another location.
13800 (%s)
13802 To change color calibration to use this profile, choose 'Set Profiles' and change the %s profile. When you are finished, click Next to continue.
13803 composite
13804 separations
13806 The gathering of files for your service bureau was not completed. The following files were not created:
13807 \n
13808 \n
13809 %s x %s %s
13810 (%s)
13811 The service bureau has requested the use of color calibration.\n\nYou do not have color management installed with %s. You must exit %s to install the color management component. Please save your work before exiting.\n\nPress cancel to exit this wizard and then run Setup from %s CD #1. Choose the Custom option and select Color Management in the Graphics Utilities section.
13812 The service bureau requests that the following color profile be used as the %s printer profile:
13813 Your document's page size is too large for the current physical page size. The document page size selected in page setup must be small enough to fit within the physical page selected in printer properties, while still leaving a %s %s margin on all sides.\n\nClick Cancel if you wish to return to your document to adjust its page size, or click Back to change the page size in printer properties.
13814 Unable to find the file:\n\n %s\n\nDo you wish to continue gathering files, omitting this file?
13815 The folder where files are being gathered to already contains a file named:\n\n %s\n\nDo you wish to replace this file?
13816 You have cancelled the gathering of files for your service bureau.
13817 Font Name
13818 Filename
13819 Fonts.TXT
13820 Below is a list of the fonts used by %s.\n\nFont Name Path\n----------------------------------------------------------------------------\n
13821 %-25.25s %s\n
13822 ,
13823 Links.TXT
13824 Below is a list of externally linked images used by %s.\n\n
13825 %s\n
13826 Your document's page size is too large for the largest physical page size supported by this service bureau. The document page size selected in page setup must be no larger than %s. \n\nClick Cancel if you wish to return to your document to adjust its page size, or click Back to select a different profile.
13828 The selected service bureau profile is not intended for use with this version of %s. Using this profile may not produce the results requested by the service bureau.\n\nDo you wish to proceed using this profile?
13829 Download profile from Internet...
13830 This service bureau profile was created for %s, and cannot be used with %s.\n\nClick Back to select a different profile, or click Cancel to exit the Prepare For Service Bureau Wizard.
13831 Any
13832 The service bureau has requested that you set the printer page size to %s.
13833 Your document page size set in page setup is %s.
13834 This is the minimum printer page size that may be used to print your graphic.
13835 To allow for any printer's marks outside this area, the minimum printer page size that may be used to print your graphic is %s.
13836 The largest printer page size supported by the service bureau is %s.\n\nIn Printer Properties, choose a printer page size that is within this range.
13837 JobInfo.TXT
13840 Resolve External Bitmaps
13841 Limit Bleed
13842 Image Position Preset
13843 All Colors Grayscale
13844 Print Pictures & Graphics
13845 Print Hidden Pictures
13846 Use Advanced Settings
13847 Screening Settings
13848 Resolution
13849 Basic Screen
13850 Marks Alignment Rectangle
13851 Auto-Position Marks Rectangle
13852 Application Information
13853 Driver Information
13854 Font Information
13855 Links Information
13856 Job Information
13857 Separaton Information
13858 Send to Text File
13859 Sent to Printer
13860 Text File Name
13861 Print File Name
13862 Print Driver Name
13863 Print Device Name
13864 Apply Default To All Pages
13888 Print
13889 Print Options
13890 Level 1
13891 Level 2
13892 PostScript 3
13893 Prepress...
13894 N-up Format
13895 Signature Layout
13896 Signature Layout (Front)
13897 Signature Layout (Back)
13898 Nothing is selected to be printed. Check your page range and/or color separation settings.
13899 You have requested that the name of the current signature layout be included in this print style. However, the current signature layout has not been saved.\n\nDo you wish to save the current signature layout?\n\n
13900 Choose Yes to save this signature layout now, No to continue saving this print style without the name of a signature layout, or Cancel if you do not wish to save this print style at this time.
13901 You have requested that the name of the current n-up format be included in this print style. However, the current n-up format has not been saved.\n\nDo you wish to save the current n-up format?\n\n
13902 Choose Yes to save this n-up format now, No to continue saving this print style without the name of a n-up format, or Cancel if you do not wish to save this print style at this time.
13903 Generic Profile
13904 One signature per sheet (1-up)
13905 1 x 2 (2-up)
13906 2 x 1 (2-up)
13907 2 x 2 (4-up)
13908 2 x 3 (6-up)
13909 3 x 2 (6-up)
13910 3 x 3 (9-up)
13911 3 x 4 (12-up)
13912 4 x 3 (12-up)
13913 4 x 4 (16-up)
13914 Custom
13920 As in document
13921 Fit to page
13922 Center of page
13923 Top center
13924 Left center
13925 Right center
13926 Bottom center
13927 Top left corner
13928 Top right corner
13929 Bottom left corner
13930 Bottom right corner
13931 Custom
13936 -
13937 Not installed
13938 Not used for grayscale output
13939 Option
13940 Setting
13941 No printers installed
13942 Do not override
13943 (Portrait)
13944 (Landscape)
13945 Tiled pages: off
13946 Tiled pages: 1
13947 Tiled pages: %d
13948 x 1
13949 x %d
13950 Selection:
13951 Page range:
13952 (%s, %s)
13953 Maximum zoom level achieved.
13954 Zoom
13955 Pick Tool
13956 Signature Layout
13957 N-up Format
13958 Marks Placement
13959 Zoom Tool
13960 x:
13961 y:
13962 %
13963 Profiles
13964 Print
13965 You cannot print more than one document simultaneously. You must either wait for the current print job to finish or cancel it.
13984 On
13985 NT Double Download Workaround (PS):
13986 Off
13987 On
13988 NT Bookman Download Workaround (PS):
13989 Render to Bitmap Resolution (PS):
13990 Automatic
13991 150 dpi
13992 200 dpi
13993 250 dpi
13994 300 dpi
13995 350 dpi
13996 400 dpi
13997 450 dpi
13998 500 dpi
13999 550 dpi
14000 600 dpi
14076 Error loading %s.
14077 Cannot Open File
14078 User Defined
14079 Form Already Exists OverWrite?
14336 Corel Color Manager
14337 unnamed color
14338 unknown INK
14339 unknown PANTONE color %d
14340 white
14341 BLACK
14342 Transparent
14344 color %d
14368 CMY
14369 CMYK
14370 CMYK255
14371 RGB
14372 HSB
14373 Grayscale
14374 Uniform Colors
14375 PANTONE MATCHING SYSTEM« Colors
14376 PANTONE« Process Colors
14377 PANTONE« HEXACHROME (TM)
14378 Netscape Navigator (TM)
14379 Microsoft« Internet Explorer
14380 TRUMATCH Colors
14381 FOCOLTONE Colors
14382 Custom Palette
14383 Lab
14384 XYZ
14385 User Defined Inks
14386 YIQ
14387 HLS
14388 Palette
14389 Mixing Area
14390 Color Blend
14391 Registration Color
14392 SpectraMaster« Colors
14393 TOYO COLOR FINDER
14394 DIC Colors
14395 Lab Colors
14396 Image Palette
14397 Color Harmonies
14398 Ink
14399 Black Body
14400 Standard VGA
14401 System
14402 Uniform Colors
14403 Microsoft (R) Internet Explorer
14416 Le&vel:
14417 T&int:
14418 &C:
14419 &M:
14420 &Y:
14421 &K:
14422 &R:
14423 &G:
14424 &B:
14425 &H:
14426 &S:
14427 &B:
14428 &L:
14429 &a:
14430 &b:
14431 &X:
14432 &Y:
14433 &Z:
14434 &Y:
14435 &I:
14436 &Q:
14437 &L:
14438 &H:
14439 &S:
14440 B&lend:
14441 &O:
14442 Brush T&ype
14443 &Hard
14444 &Medium
14445 &Soft
14446 Unable to add color, color already in palette
14447 Value 1
14448 Value 2
14449 M&ore >>
14450 << &Less
14464 inch
14465 Default
14466 Dot
14467 Line
14468 Not enough disk space to save file %s.
14469 Opening
14470 Reading
14471 Writing
14472 Corel Color Manager
14473 Error %s %s file.
14474 untitled.cpl
14475 Custom palette (*.cpl)|*.cpl|
14476 Process palette (*.pal)|*.pal|
14477 Spot palette (*.ipl)|*.ipl|
14478 Select Color
14483 Delete '%s' from palette?
14484 You have not saved the changes to %s. Opening a new palette will discard these changes.\n\nDo you wish to continue opening a new palette?
14485 You have not saved the changes to %s. Creating a new palette will discard these changes.\n\nDo you wish to continue creating a new palette?
14486 The current custom palette is a Process Palette (%s) and cannot be saved under the *.%s format. To save your changes, rename the palette to a Custom Palette (*.%s).\nDo you wish to continue and discard your changes?
14487 The current custom palette is a Spot Palette (%s) and cannot be saved under the *.%s format. To save your changes, rename the palette to a Custom Palette (*.%s).\nDo you wish to continue and discard your changes?
14488 %s is not a valid palette filename.
14489 Not Enough Memory, Please close some applications and try again.
14490 Can't find file %s in directory %s
14493 untitled.bmp
14494 Color mixing files (*.bmp)| *.bmp|
14495 Open Color Mix File
14496 Save Color Mix File
14497 Open Palette
14498 Save Palette As
14499 New Palette
14500 BMP File (*.bmp)|*.bmp|
14501 Load Mixing Area File
14502 Save Mixing Area File As
14503 Error opening file %s.
14504 %s is not a valid mixing area file.\nOnly 1, 4, 8, and 24 bit non-compressed .BMP files are supported.
14505 Error reading file %s.
14506 Error - low memory.
14507 Open Palette...
14561 Warning
14617 C:
14618 M:
14619 Y:
14620 R:
14621 G:
14622 B:
14623 The specified color name has already been used. Please choose another name for this color.
14625 Hex. Yellow
14626 The number of colors in the Custom Color Palette has reached its maximum. Adding the new color will cause the last color to be overwritten.\nWould you like to add this color?
14627 Adding all colors will cause the maximum number of colors in the Custom Color Palette to be exceeded by %d colors. Delete some colors from the Custom Palette, or create a new palette before adding these colors.
14628 Custom Colors -
14640 OK
14641 %s calibration error.
14642 General error. Please check your Profile generating procedure.
14643 Not Enough Memory. Please close some applications and try again.
14644 Cannot open file %s.
14645 Incorrect file format or Bad values in %s.
14646 Not enough disk space, or file %s is read only.
14647 Incorrect file format or Bad values in %s.
14648 %s calibration error.
14649 %s calibration error.
14650 Exit Corel Color Manager?
14651 Time out
14652 Can't overwrite %s !
14653 File %s does not exist !
14654 Scanner calibration file %s does not exist.
14655 The file %s is read only. Please change the file attributes and try again.
14656 %s is not a valid System Profile.
14657 Incorrect file format or bad values in measurement file %s. Check that all colors are in XYZ100; check also that the file contains %d colors.
14658 Gam&ut Alarm
14659 &Measure From
14660 &None
14661 &Gretag SPM55
14662 XRite &DTP22
14664 Do you want to overwrite the existing file ?
14665 Other...
14666 Please wait...
14667 Generating the System Profile %s
14688 &Add Color to Palette
14689 &Swap Color
14690 B&rush Size
14691 &Small
14692 &Medium
14693 &Large
14694 &Color Viewer
14695 CMY&K - 3D Subtractive
14696 &RGB - 3D Additive
14697 HSB - &Hue Based (Default)
14698 HSB - &Brightness Based
14699 &CMY - 3D Subtractive
14700 HSB - &Wheel Based
14701 &Lab - Device Independent
14702 &YIQ - Television
14703 HSB - &Saturation Based
14704 &Load Bitmap...
14705 Sa&ve Bitmap...
14706 Cl&ear Bitmap
14707 Show Color Names
14708 &PostScript Options...
14709 &Grid Size
14710 Color Options
14711 Palette Options
14712 Mod&el:
14713 Typ&e:
14714 Mod&el:
14715 Selecte&d Color
14716 Add A&ll Grid Colors to Palette
14717 &Get Color
14718 &What's This?
14720 \ColorMgr.exe
14722 Could not load the Color Profile Wizard. Please ensure it is properly installed.
14723 Color Manager - Error
14724 Color Manager was unable to detect the selected device. \n Please check that the correct device has been selected, \n and that connections are in order.
14725 Color Manager was unable to read the measurement. Please try again.
14726 Device failed to validate password.\n Possible transmission error, please check connections and try again.
14727 An unspecified device error occurred with the Colortron II
14728 &XRite 918
14729 &Colortron II
14731 The DLL's %s and %s are both required for the Colortron II,\n and at least one could not be found.
14732 %s, which is required for the Colortron II, \ncould not be found.
14745 The calibration was successful.
14746 The calibration was not successful. Please try again.
14752 K:
14753 H:
14754 S:
14755 B:
14756 L:
14757 a:
14758 b:
14759 O:
14760 Color Name -
14761 Color Manager was unable to read the measurement. \n Please take the measurement again and check that \n Your Colortron II is calibrated correctly.
14762 The Colortron II is known to conflict with certain \ntablets causing them to function improperly. Do you \nstill wish to use the Colorton II?
14800 CMYK offset press, SWOP inks on coated paper
14801 Generic CMYK printer profile
14802 Generic offset separations profile
14816 The Color Manager could not create a needed color transform. Colors in your document will be uncorrected.
14817 1.3.1
14819 2.7.4
14821 The Kodak Color Management system could not be initialized. Color management functions will be disabled.
14822 No Color Management System installed.
14823 An older version of the Kodak Color Management System is installed on this system. Please reinstall this application from your original disks.
14824 Unable to load file Profiles.ccm. Please restore the file to the Color directory, or reinstall this application from your original disks.
14832 Don't Calibrate (None)
14833 Don't Calibrate
14834 Don't Calibrate
14835 Cancel
14836 Finish
14837 None
14838 N/A
14848 Plug-In Folders
14849 The selected plug-in directory is a duplicate and will be deleted.
14850 The specified directory could not be created.
14851 The directory %s does not exist. Do you wish to create it?
14852 C
14853 M
14854 Y
14855 K
14856 H
14857 S
14858 B
14859 L
14860 I
14861 Q
14862 R
14863 G
14864 B
14865 L
14866 a
14867 b
14868 Edit
14869 Pick
14870 RGB
14871 HSB
14872 HLS
14873 CMY
14874 Lab
14875 YIQ
14876 Color Blend
14877 CMYK
14878 CMYK255
14879 Grayscale
14880 Registration Color
14881 Palette
14882 Mixing Area
14883 Uniform Colors
14884 Image Colors
14885 Custom Colors
14886 XYZ
14887 PANTONE« Process Colors
14888 PANTONE MATCHING SYSTEM« Colors
14889 PANTONE« HEXACHROME (TM)
14890 TRUMATCH Colors
14891 SpectraMaster« Colors
14892 TOYO COLOR FINDER
14893 DIC Colors
14894 Lab Colors
14895 Netscape Navigator (TM)
14896 Microsoft« Internet Explorer
14897 FOCOLTONE Colors
14898 Green
14899 Blue
14900 Cyan
14901 Magenta
14902 Yellow
14903 Black
14904 Gray
14905 Channel
14906 Duotone
14907 Fill Mixing Area
14909 Inside Gamut
14910 Outside Gamut
14911 USERINKS Colors
14923 X
14924 Y
14925 Z
14926 Paper Color
14927 Paint Color
14928 Show Color Com&ponents
14929 S&how Color Name
14930 Show Mi&xing Area
14931 Show &Model
14932 Swap Co&lors
14934 &What's This?
14935 &Properties...
14947 Gam&ut Alarm
14949 &Add Color to Palette
14950 Red
14954 B&rush Size
14955 &Small
14956 &Medium
14957 &Large
14958 Load Bi&tmap...
14959 &Save Bitmap...
14960 Clear &Bitmap...
14961 &Grid Size
14962 &Color Model
14963 &CMYK
14964 &RGB
14965 &HSB
14966 &Edit Color...
14967 &Rename Color
14968 &Delete Color
14969 &New Palette...
14970 &Open Palette...
14971 &Save
14972 Sa&ve As...
14973 Show Color Names
14974 Auto-Blend
14978 Brush T&ype
14979 &Hard
14980 &Medium
14981 &Soft
14982 O
14983 HSB - &Wheel Based
14984 HSB - &Hue Based (Default)
14985 &RGB - 3D Additive
14986 &CMY - 3D Subtractive
14987 CMY&K - 3D Subtractive
14988 &Lab - Device Independent
14989 &YIQ - Television
14990 &Color Model
14991 HSB - &Brightness Based
14992 HSB - &Saturation Based
15115 Corel Black
15116 Corel Red
15117 Corel Green
15118 Corel Blue
15119 Corel White
15120 Set Absolute References
15121 You should do this at least once a day, but there's little benefit from doing this more than twice a day.
15122 Absolute White
15123 Last set:
15124 Absolute white has not been set.
15125 Measure the white Calibration Target matched to your Colortron(TM) until you hear the 'measurement done' sound.
15126 Absolute Black (Zero Reflectance)
15127 Last set:
15128 Absolute black has not been set.
15129 Measure the opening on your Black Trap until you hear the 'measurement done' sound.
15136 Save palette?
15137 Reset palette?
15138 %d%% %s
15139 C:%d M:%d Y:%d K:%d
15140 C:%d M:%d Y:%d
15141 L:%.1f a:%.1f b:%.1f
15142 R:%d G:%d B:%d
15143 H:%d L:%d S:%d
15144 H:%d S:%d B:%d
15145 Y:%d I:%d Q:%d
15146 G:%d
15147 Registration Color
15148 Y:%d O:%d M:%d C:%d G:%d K:%d
15149 G:
15150 Remove selected group of colors
15151 Color Table
15152 Invalid color for User Defined Inks palette
15153 Palette Editor
15154 unnamed
15155 This palette can not be edited. Only User Defined Inks and custom palettes can be modified.
15168 -
15169 Color Display
15170 Color General
15172 Color Profiles
15173 Automatic
15174 Photographic
15175 Illustration
15176 Get profile from disk...
15177 Install from disk
15178 OK
15179 The specified location does not contain any profiles for your device.
15180 The device %s is already defined in %s.\nDo you want to replace the existing device file with the new one?
15184 Primary
15185 Complement
15186 Contrast 1
15187 Contrast 2
15188 Harmony 1
15189 Harmony 2
15190 Harmony 3
15191 Harmony 4
15192 Harmony 5
15193 None
15194 Lighter
15195 Darker
15196 Warmer
15197 Cooler
15198 Less saturated
15200 Color Palettes
15201 None
15202 Fixed Palettes
15203 Custom
15204 Uniform
15205 FOCOLTONE Colors
15206 PANTONE MATCHING SYSTEM« Colors
15207 PANTONE« Process Colors
15208 PANTONE« HEXACHROME (TM)
15209 TRUMATCH Colors
15210 Netscape Navigator (TM)
15211 Microsoft« Internet Explorer
15212 SpectraMaster« Colors
15213 TOYO COLOR FINDER
15214 DIC Colors
15215 Lab Colors
15216 CMYK
15217 RGB
15218 Loaded Palette
15219 Image Colors
15360 Texture : non RGB colors
15361 Texture fills are rendered as bitmaps and hence are optimized to retain colors selected from the RGB color model. All other color models used to select texture fill parameters will be converted to RGB.
15362 Spot Color Lens/Object
15363 Lens effects are rendered in RGB. Spot color lens and/or any spot color objects underneath the lens will be rendered in process color for color separations output..
15364 Lens is over a Spot Color
15365 Lens effects are rendered in RGB. The effect on any spot color objects underneath a lens will be rendered in process color for color separations output.
15366 Bitmap has color mask
15367 Converting to Duotone will result in a loss of the Bitmap Color Mask.
15368 Distortion Effect
15369 This distortion is extremely complex and may take several minutes to calculate.\n\nWould you like to continue?
15370 Applying Lens to Duotone Bitmap
15371 Printing Duotones to Postscript printers is optimized.\nIf a lens effect is applied to the duotone, these optimizations cannot be used and may result in slower printing.
15372 This operation will prevent the embedded graphic(s) from displaying and printing in this text string.
15373 Softmask Replacment
15374 This operation is being applied to a bitmap with a softmask. It will replace the original softmask.
15375 %ld bitmap images will be required to fill the chosen page size. This will take considerable amount of time to calculate and display. Would you like to continue?
15440 Uniform
15441 Standard VGA
15442 Adaptive
15443 Optimized
15444 Custom
15445 Black body
15446 Grayscale
15447 System
15448 Microsoft Internet Explorer
15449 Netscape Navigator(TM)
15616 pixels
15617 Wireframe
15618 Smooth Shading
15619 Flat Shading
15632 Select File
15633 Corel on the &Web
15634 Can not cut/copy across Internet Layer.
15635 Unable to create the Corel HTML Viewer Control.\nTutor files have not been installed.
16385 SCEDIT.EXE
16386 SCCOMP80.DLL
16387 SCINT80.DLL
16388 Unable to load Corel SCRIPT Compiler DLL SCCOMP80.DLL or SCCOMP78.DLL.
16389 Unable to load Corel SCRIPT Interpreter DLL SCINT80.DLL or SCINT78.DLL.
16390 DLL Entry point not found
16391 Corel SCRIPT Error
16392 Script contains an error and could not be run.
16393 Script %s contains an error and could not be run.
16400 This operation is not available
16401 You need an open document for this operation
16402 You cannot Playback/Run a Script while recording
16403 A Begin... command is needed before this command
21973 '%s - %s' is no longer available. A component\nof your application may have been uninstalled.
21974 '%s - %s' is no longer available.
21975 Reset the status bar to original settings? (This operation cannot be undone)
21976 Wednesday, September 30, 2000
21977 Table
21978 Columns
21979 Cancel
21980 &Update
21981 Save Copy &As...
21982 Main Table
21983 Clear Bitmap\nThis will clear off all the drawing irrevocably.\nAre you sure you want to proceed?
21984 Copy Bitmap\nSome other application has the clipboard ownership.\nRetry after closing all other applications.
21985 Paste Bitmap\nThis operation will erase the bitmap being edited.\nDo you want to continue?
21986 Paste Bitmap\nUnable to complete operation.\nMake sure that the clipboard contains a bitmap.
21987 Restore Defaults\nYou will lose the customized button properties irrevocably.\nAre you sure you want to proceed?
21988 Import Bitmap\nBitmap too large for the toolbar button.\nDo you want to shrink it to fit?\n\nHint: Shrinking may distort the image\n Click NO if you want to pan around the cropped bitmap
21989 Import Bitmap\nBitmap too large for the toolbar button.\nDo you want to shrink it to fit?\n\nHint: Shrinking may distort the image\n Click NO if you want to pan around the bitmap
21990 Drop File\nInvalid file format.\nYou can drop only .BMP and .DIB files
21991 Button Properties
21992 Edit &Scale...
21993 Re&solution...
21994 per tick
21995 Roll-Up Groups
21996 %s : %s
21997 This will cause the drawing scale to be reset to 1.0. Continue?
21998 Keyboard Shortcuts
21999 Page : %d
22000 Text File (*.txt)
22001 *.txt
22003 Spacing
22004 Frequency
22005 &X1:
22006 Y&1:
22007 &X:
22008 &Y:
22009 There is already a Roll-Up Group with that name. Please use a different name.
22010 &Other...
22011 1:
22012 2:
22013 3:
22014 Rotation values
22015 Link files
22016 The item '%s' referred by this link file is missing.\n\n Do you want to try to resolve the link ?
22017 Unable to delete the file '%s'\nA read-only attribute may be the cause.
22018 Unable to launch '%s'
22019 Shortcut to
22020 The maximum number of tabs are already present
22021 CorelDRAW!
22022 Error
22023 Error saving file
22024 Error allocating memory
22025 Image
22026 Text
22027 Shortcut Key Configuration
22028 Save the current shortcut key configuration in\n'%s' ?
22029 Reset to default application settings?
22030 Shortcut key Files (*.sck) | *.sck||
22031 Command\nTable\nKeyStroke\nDescription
22032 Keyboard Shortcuts
22033 Page : %d
22034 Shortcut keys print better in landscape mode\n Do you want to print in landscape mode?
22035 &Options <<
22528 Uniform Fill
22529 Outline Color
22530 Uniform Transparency
22656 Two-Color Foreground
22657 Two-Color Background
22658 Fountain Fill
22659 Uniform Fill
22660 User Defined
22661 Are you Sure You Want to Delete?
22662 Label Name cannot be Empty
22663 Cannot Open File
22664 Label form name \n %s already exists\n Overwrite?
22672 Customize Label
22673 The current label layout does not allow the specified number of\nlabels to fit across the page.
22674 The current label layout does not allow the specified number of\nlabels to fit down the page.
22675 The current label layout does not allow the specified number of\nlabels to fit across and down the page.
22688 Right Side
22689 Left Side
22690 Booklet
22691 Book
22692 Full Page
22693 Side-Fold Card
22694 Tent Card
22695 Top-Fold Card
22696 One page per sheet
22697 Two pages per sheet
22698 Four pages per sheet
22699
22700 Cut in middle
22701 Fold in middle
22702 Fold on top
22703 Fold on left
22704 OK
22705 Cancel
22706 &Help
22707 Page Setup
22708 Label Types
22709 %s, %s
22710 %.4g %s
22711 in.
22712 The printer is currently set to use an unrecognized paper size. Paper type not changed.
22713 Cannot Set From Printer
22714 Paper Color
22715 The new page type could not be saved.
22716 Unable to save Paper Type, the specified name already exists.
22717 Failed to delete Paper Type file.
22718 Are you sure you want to delete the paper type
22719 Are you sure you want to rename the paper type
22720 Failed to rename Paper Type file.
22721 Save &Custom Page
22722 &Delete Custom Page
22723 Page Background
22724 Please choose a bitmap by clicking on the Browse button.
22725 File %s not found.
22726 The Paper Type file %s already exists. Do you want to replace it?
22727 Multi-layer bitmaps cannot be used as a background image. Please select another bitmap file format
22787 %
22788 Delete last selected arrow?
22789 Outline Color
22791 Vector Pattern
22792 Vector Pattern
22793 Two-Color Bitmap Pattern
22794 Error: Nothing selected, cannot delete.
22795 Delete Full-Color Pattern
22796 Error: File %s has been deleted.
22797 Delete File: %s?
22798 Delete currently selected Two-Color Pattern?
22799 Delete Two-Color Pattern
22800 Two-Color Foreground
22801 Two-Color Background
22802 Fountain Fill
22803 Uniform Fill
22804 Full-Color Bitmap Pattern
22805 Tiles.ini Not Found
22806 Delete currently selected Bitmap Pattern?
22807 Delete Bitmap Pattern
22808 Cannot Open Full-Color Bitmap File
22809 Load
22810 Pattern File (*.pat)|*.pat||
22812 Could not import selected file
22813 Delete currently selected Full-Color Pattern?
22814 Error: Could not
22815 There are too many dots and dashes, please remove some to continue.
22816 Fountain Fill
22817 Default
22818 Delete preset: %s?
22819 Edit Line Style Warning
22820 2-color
22821 Full color
22822 Bitmap
22832 %s is read only. \n\n CorelDRAW cannot create the arrow !
22833 Create Arrow
22834 HAIRLINE
22835 Delete Arrowhead
22848 Linear
22849 Radial
22850 Conical
22851 Square
22852 Preset already exists,\n Overwrite ?
22853 Rectangular
22864 Texture Fill
22865 The format of the file %s is not currently supported for use as a fill.
22866 Style Name:
22867 Arrowhead file CORELDRW.END could not be found
22868 Save Texture as
22869 Texture exists in this Library,\n Overwrite ?
22870 Please enter a different name.
22871 Delete Texture: %s?
22872 Texture Options
22873 %s bytes
22874 Error generating Texture
22875 Are you sure?
22876 Function not found in TXR_EngineProc
22877 TXR_EngineProc not found in Texture DLL
22878 Texture DLL not found
22879 Could not find your Texture directory
22890 Error during Save As
22891 Texture file CORELDRW.TXR could not be found.
22892 You cannot Save in the Styles Library
22893 Cannot Open Texture Bitmap File
22894 None
22895 Hairline
22896 Could not create any new outline style,\nthe maximal number of outline styles being reached.\n\nPlease remove some outline styles if you want to add new ones.
22897 Fountain Transparency
22898 Texture Fill
22899 Texture Transparency
22900 Pattern Fill
22901 Pattern Transparency
23552 Invalid Custom Directory specified in corelapp.ini.
23554 coreldrw.hlp
23555 Find and Replace
23556 Find has reached the end of the text.\nDo you want to continue the search\nfrom the beginning of the text?
23557 Search text not found!
23558 Unknown Operation
23559 Typing
23560 Break Paragraph
23561 Delete
23562 Delete Selection
23563 Paste
23564 Cut
23565 Select Text
23566 Cursor Move
23567 Apply Style
23568 Revert To Style
23569 Change Multiple Attributes
23570 Change Alignment
23571 Change Spacing
23572 Change Tabs
23573 Change Bullet
23574 Change Indents
23575 Change Hypenation
23576 Change Color
23577 Change Typeface
23578 Change Type Style
23579 Change Type Size
23580 Change Type Angle
23581 Change Character Shifts
23582 Change Range Kerning
23583 Change Line Attributes
23584 Change Drop Cap
23585 Change Case
23586 Replace Text
23587 Change Paragraph Text Frame
23588 Drag and Drop Text
23589 Change Anchor Name
23590 Change HotLink
23591 Change Text Interactively
23592 Type Assist
23593 .?!& í┐
23594 monday
23595 tuesday
23596 wednesday
23597 thursday
23598 friday
23599 saturday
23600 sunday
23602 This entry already exists. Do you want to Replace it?
23603 Are you sure you want to delete this entry?
23604 % of Char. height
23605 points
23606 % of Pt. size
23607 AaBbYyZz
23608 This is a TrueType font.
23609 This is a PostScript Type 1 font.
23610 (none)
23611 Single Thin
23612 Single Thin Word
23613 Single Thick
23614 Single Thick Word
23615 Double Thin
23616 Double Thin Word
23617 ╞x╞xAa12
23618 Thin
23619 Thin-Italic
23620 ExtraLight
23621 ExtraLight-Italic
23622 Light
23623 Light-Italic
23624 Normal
23625 Normal-Italic
23626 Medium
23627 Medium-Italic
23628 SemiBold
23629 SemiBold -Italic
23630 Bold
23631 Bold-Italic
23632 ExtraBold
23633 ExtraBold-Italic
23634 Black
23635 Black-Italic
23636 (Not Found)
23637 There are no fonts available for text.
23638 (none)
23639 Small CAPS
23640 All CAPS
23641 Subscript
23642 Superscript
23643 Bullet
23644 Drop cap
23645 Default Graphic
23646 Default Artistic Text
23647 Default Paragraph Text
23649 Edit Underline
23650 Edit Overline
23651 Edit Strikeout
23652 Paragraph Text Frames:
23653 Linked Frames:
23654 Empty Frames:
23655 Not all of the text fits in the frames.
23656 Not all of the text fits in the frame.
23657 Artistic Text Objects:
23658 Paragraphs:
23659 Paragraphs:
23660 Lines:
23661 Words:
23662 Characters:
23663 \nAll Text In Document
23664 Selection:\n%d Artistic Text Object, %d Paragraph Text Frame
23665 Selection:\n%d Artistic Text Object, %d Paragraph Text Frames
23666 Selection:\n%d Artistic Text Objects, %d Paragraph Text Frame
23667 Selection:\n%d Artistic Text Objects, %d Paragraph Text Frames
23668 \nSelection: Artistic Text Object
23669 \nSelection: %d Artistic Text Objects
23670 \nSelection: Paragraph Text Frame
23671 \nSelection: Linked Paragraph Text Frames
23672 \nSelection: %d Paragraph Text Frames
23673 Number of styles used:
23674 Fonts used:
23675 Bullet &indent:
23676 There are already %d tabs which is the maximum number allowed.
23677 There are no symbol fonts installed.
23678 Selected Frames Only
23679 Selected And Subsequent Frames
23680 All Frames
23681 This action cannot be completed because it would produce a paragraph that is greater than the maximum allowable length.
23682 Can't Allocate memory to be used for proof reading a sentence.\nSentence skipped
23683 Error allocating memory.\nProcess is not completed.
23684 This is not a valid number.\nCan't set the new font size.
23685 Text import error
23686 This action cannot be completed because it would produce a text object with too many paragraphs.
23687 Font Options
23688 Please select at least one font option
23689 Please select at least one type of style in the style list
23690 There isn't any text in this document!
23691 No fonts available. Reset all options.
23697 Spell Assist internal error '%d'.
23698 Add
23699 No Alternate Spelling
23701 Cannot initialize Spell Assist
23702 Cannot initialize QuickSpell plug-in
23703 Error while checking word
23704 Cannot initialize Hyphenation
23705 Cannot shutdown Hyphenation
23706 Soft Returns
23707 Hard Returns
23708 Tabs
23709 Spaces
23710 Fail to set spell assist data
23711 Grayscale value:
23712 Tint value:
23713 Format Text
23717 !%),.?]}íúñѺ¿⌐¬½¼¡«»░▐▀üAüBüCüDüEüFüGüHüIüJüKüRüSüTüUüXü[üfühüjülünüpürütüvüxüzü9 üRüìüÄü ü ü± x í ú Ñ º ┴ ß π σ ∞Æ@ÆBÆDÆFÆHÆbÆÆÆ& Æ! ÆÄÆ" Æ
23718 $([\{óüeügüiükümüoüqüsüuüwüyüÅüÉü
23719 ,.íñüAüBüCüD
23720 Top
23721 Bottom
23722 Full
23723 Center
23724 Left
23725 Right
23726 Decimal
23727 Tabs
23728 Alignment
23729 Leadered
24848 Invalid file handle
24849 Out of Memory
24850 Invalid resource data
24851 I/O read error
24852 I/O write error or Disk is full
24853 Invalid file format
24854 Invalid header
24855 Invalid bitmap raw data
24856 Invalid compress data
24857 Internal Memory is corrupted
24858 Key is not in registry file.
24859 Invalid Parameters.
24860 Invalid filter.
24862 User Aborted
24863 Stack Violation
24864 Unrecoverable Error
24865 Invalid Arithmetic operation
24866 Memory Access Violation
24868 All Files
24869 *.*
24870 Import
24871 Export
24872 Full Image
24873 Crop
24874 Resample
24875 Partial Load
24903 Import Into Bitmap
24904 Bitmap Export
24916 Black and White
24917 Grayscale (8-bit)
24918 16 Colors
24919 Paletted (8-bit)
24920 RGB Color (24-bit)
24921 CMYK Color (32-bit)
24922 Option&s >>
24923 Option&s <<
24924 Pixels , Black and White (1-bit)
24925 Pixels , 16 Colors (4-bit)
24926 Pixels , Grayscale (8-bit)
24927 Pixels , 256 Colors (8-bit)
24928 Pixels , 16.7 Million Colors (24-bit)
24929 Pixels , 16.7 Million Colors (32-bit)
24930 Unknown
24931 Imp&ort
24932 E&xport
24933 bytes
24938 1 to 1
24939 640x480(VGA)
24940 800x600(SVGA)
24941 1024x768
24942 Custom
24943 Initial DIR
24944 Prev Check
24945 Import Type
24946 Use Def Value
24950 OPEN File Dialog
24951 SAVE File Dialog
24952 Option State
24954 Filter Manager
24955 Dithered
24956 Size Index
24957 Identical Value
24958 H Resolution
24959 V Resolution
24960 Width
24961 Height
24962 Anti Alias
24963 Resolution Index
24964 300 DPI
24965 200 DPI
24966 150 DPI
24967 75 DPI
24968 FAX Fine (200x100)
24969 FAX Normal (100x100)
24970 Color Index
24971 Color Profile
24972 Fountain Steps
24973 Aspect Ratio
24974 Apply Mask
24975 Uncompressed
24976 FILTER ID
24978 already exists.\n\nReplace existing file?
24979 Cannot access this file because it is being used by another process
24981 is not the same format as the selected filter.
24992 Raster
24993 Vector
24994 Text
24995 Animation
24996 Sound
25014 Check for Watermark
25017 Internet
25018 There must be at least one import/export filter available. A random filter was enabled.
25019 There are no import filters available
25020 There are no export filters available
25021 No Selection
25024 Pixels , Duotone (8-bit)
25025 Pixels , Lab Color, 16.7 Million Colors (24-bit)
25026 There are no internet filters available
25027 To enable changes to the installed filters, please close and re-open the current dialog
25028 Pixels , %ld Colors (%d-bit)
25029 Pixels , Grayscale (16-bit)
25030 Pixels , RGB (48-bit)
25031 Group Selected
25032 %s has an invalid file format
25118 Font Manager
25119 No fonts were found. This application may not have been properly installed.
25120 No fonts were found. This application may not have been properly installed.
25121 Invalid font directory specified in corelapp.ini.
25122 A problem occurred accessing %s from the Font Navigator Catalog. The file\nfor this font should be located at %s.\n\nPlease ensure the Font Navigator Catalog has up to date information about\nthe fonts on the system. %s will be temporarily used to replace\n%s until the issue is resolved.
25125 (Not Found)
26147 &Edit
26148 &Edit,0,2
26149 &Open,0,2
26150 \nPresentation Exchange Objects have full display capabilities, but logical information may not be preserved.
26375 Limit of %d 'plug-in' filters reached - Ignoring the rest.
26376 Could not load %s.
26378 a memory full
26379 a user cancelled
26380 a read error
26381 a write error
26382 an open error
26383 an I/O error
26384 an error
26385 a null handle error
26386 a disk full error
26387 an end-of-file error
26388 Plug-in filter '%s' in file %s reported %s condition.
26389 an error %d
26390 Unknown
26391 Other
26392 a bad parameters
26393 an unsupported image type
26394 This plug-in is attemping to use a feature not implemented by Corel PHOTO-PAINT.
26395 Warning
26397 a missing .ini file
26399 Some plug-ins could not be loaded. There could be a memory shortage.
26401 an internal error
26402 This filter does not support the current image type.
27461 Memory
27462 File
27463 Buffered
27464 An Unknown Error has occured in the Twain Source Manager during Initialization.\n\nTwain functionality will be disabled.
27465 The Twain Source Manager could not be Loaded, the file Twain_32.dll is either missing or corrupted.\n\nTwain functionality will be disabled.
27466 The Twain Source Manager could not be Initialized.\n\nTwain Functionality will be disabled.
27467 No Twain Drivers could be found.\n\nPlease make sure that your Twain Driver(s) have been installed properly.
27468 The Selected Twain Driver could not be enabled.\n\nThe driver is either busy, or the Hardware is not installed properly.
27469 An Unknown Error has occured during Image Acquisition.
27470 A Low Memory Error occured during Twain Image Acquisition.\n\nPlease try reducing the size of your Image.
27471 A Low Disk Space Error has occured during Twain Image Acquisition.\n\nPlease try reducing the size of your Image, or free up some disk space.
27472 The Selected Image is too large.\n\nPlease try reducing the size of your Image.
27474 The Twain Driver could not complete the Image Acquisition to Memory.\n\nPlease try Buffered, or File Mode from the Options Dialog.
27475 The Twain Driver could not complete the Image Acquisition in Buffered Mode.\n\nPlease try Memory, or File Mode from the Options Dialog.
27476 The Twain Driver could not complete the Image Acquisition to File.\n\nPlease try Memory or Buffered Mode from the Options Dialog.
27477 An Unknown Error occured when creating a temporary file.\n\nPlease check your Windows temp Directory and try again.
27478 The Selected Image has an unsupported Pixel Depth.\n\nPlease try reducing the number of colors in your image.
27479 Buffered Transfer Mode does not support Planar Data.\n\nPlease try Native or File Transfer Mode with this Twain Driver.
27480 This image contains an unsupported image data type.\n\nPlease check the options in your Twain Driver for B&W, Gray, or RGB Selections.
27481 This Twain Driver does not support File Transfer Mode.\n\nPlease try Native, or Buffered Mode from the Options Dialog.
27482 CorelSCAN 8
27483 Failed to launch CorelSCAN correctly
27490 Failed: %s %s\n\nIn order to use CorelSCAN with this Twain Driver, you must scan with the Vendor User Interface.
27491 Set Current
27493 Get Supported
27494 Get Current
27495 Image Layout
27496 Resolution
27497 Bit Depth
27498 Pixel Type
27499 CorelSCAN has detected a serious problem with a previous test using this device.\n\nDo you wish to try the test again?
27501 Testing: %s
27502 Feeder
27503 Native Resolution
27504 Physical Size
27505 Scan
27506 The Current TWAIN Driver has already been tested. \n\nDo you wish to perform the test again?
27507 CorelSCAN is about to begin a scan compatibility\ntest for the driver you have selected. Please\nsave ALL your work before starting this test.\n\nDo you wish to proceed?
27508 Protocol
27509 Scanner
27510 Unknown
27511 Driver UI
27512 Feeder
27513 Flat Bed
27514 An unknown error has occured.\n\nPlease make sure you Scanner software is installed properly.
27515 An error has occured while trying to access a Scanner protocol.\n\nPlease make sure your Scanner software is installed properly
27516 There is no Scanner currently selected.\n\nPlease choose the scanner you wish to use.
27517 No Scanners could be detected in your system.\n\nPlease make sure you have installed the software for your Scanner correctly
27519 A Low Memory Error occured.\n\nPlease try reducing the size of your Image, or close some applications
27520 A Low Disk Space Error has occured.\n\nPlease try reducing the size of your Image, or free up some disk space.
27521 There is a problem with the Image paramaters used for this scan.\n\nPlease try adjusting your Image and try again.
27522 An error occured while trying to create Scan Buffers.\n\nPlease free some memory and try again.
27523 Scanner reports that incoming image data is Planar.\n\nCorel currently does not support Planar Image Data.
27524 This image contains an unsupported image data type.\n\nPlease check the options in your Twain Driver for B&W, Gray, or RGB Selections.
27525 The Selected Image has an unsupported Pixel Depth.\n\nPlease try reducing the number of colors in your image.
27526 An error occured while trying to start your Scanner.\n\nPlease make sure it is connected properly.
27527 Generic Profile
27528 An error occured trying to start your scanner's Automatic Document Feeder.\n\nPlease make sure it is connected properly.
27529 You cannot run multiple instance of CorelSCAN
27530 None
27920 (PANOSE default)
27921 (Corel default)
27922 Temp
27923 Perm
27924 Save changes to your font matching exceptions file?
27925 Save changes
28065 Blank font name
28066 Font names may not be left blank.
28067 Exception conflict
28068 A matching exception already exists for this font.
28069 Duplicate Macintosh name
28070 An alternate spelling rule for this Macintosh font name already exists.
28071 Duplicate Windows name
28072 An alternate spelling rule for this Windows font name already exists.
28073 Memory allocation failure
28074 An error occurred allocating memory.
28075 List full
28076 No more entries can be added to the required list.
28160 US
28161 Writing Tools
28162 &Close
28163 &Help
28164 Spell Checker
28165 Thesaurus
28166 Grammatik
28170 Word
28171 Sentence
28172 Paragraph
28173 Document
28174 Selected Text
28175 Highlighted Text
28190 Cannot Initialize Writing Tools.
28191 Unable to initialize Writing Tools Registry.
28192 has not been installed.
28193 No Writing Tools have been installed.
28671 CorelCMS
32770 Opens the Color Manager Wizard\nColor Manager
32771 Opens the Corel Multimedia Manager\nCorel Multimedia Manager
32773 Exits CorelDRAW and prompts to save the active drawing\nExit
32774 Allows the properties of a tool to be viewed and edited\nTool Properties
32775 Opens the Toolbar dialog\nToolbar Dialog oolbar
32776 Runs a Corel SCRIPT file\nRun Script
32777 Runs the Corel SCRIPT Editor\nCorel SCRIPT Editor
32778 Opens the Script and Preset Docker Window\nScript and Preset\nScript && Preset
32781 Opens the Contents tab of the Help Topics dialog\nHelp Contents
32782 Opens the Hints Window; provides context-sensitive hints depending on the tool selected\nHints
32783 Opens the CorelDRAW Technical Support help file\nTechnical Support
32784 Displays registration, system and copyright information\nAbout CorelDRAW!
32785 Launches Other Applications\nApplication Launcher\nLauncher
32786 Runs the CorelTUTOR; provides step-by-step instructions on completing CorelDRAW tasks\nCorelTUTOR
32787 Brings up the Property Bar and gives focus to the first visible item that can be tabbed to\nBring up Property Bar
32793 Applies no color correction to the drawing\nNo Color Correction
32794 Applies a fast color correction level to the drawing\nFast Color Correction
32795 Applies an accurate color correction level to the drawing\nAccurate Color Correction
32796 Simulates the selected printer's colors\nSimulate Printer
32797 Turns the gamut alarm on or off (toggle)\nGamut Alarm
32809 Hides the color palette\nNo Palette
32810 Displays the Uniform color palette\nUniform Colors
32811 Displays a Custom color palette\nCustom Colors
32812 Displays the FOCOLTONE color palette\nFOCOLTONE Colors
32813 Displays the PANTONE MATCHING SYSTEM« color palette\nPANTONE MATCHING SYSTEM« Colors
32814 Displays the PANTONE« Process color palette\nPANTONE« Process Colors
32815 Displays the PANTONE« HEXACHROME (TM) color palette\nPANTONE« HEXACHROME (TM) Colors
32816 Displays the TRUMATCH color palette\nTRUMATCH Colors
32817 Loads a custom color palette\nLoad Custom Colors
32818 Displays the Netscape Navigator (TM) color palette\nNetscape Navigator (TM) Colors
32819 Displays the Microsoft« Internet Explorer color palette\nMicrosoft« Internet Explorer Colors
32821 Displays the DuPont SpectraMaster« color palette\nDuPont SpectraMaster« Colors
32822 Displays the TOYO COLOR FINDER color palette\nTOYO COLOR FINDER
32823 Displays the DIC color palette\nDIC colors
32824 Displays the L*a*b* color palette\nLab Colors
32833 Creates a new drawing\nNew
32834 Opens the Template Wizard; CorelDRAW and PaperDirect templates can be used as the basis for a new drawing\nNew From Template
32835 Opens an existing drawing\nOpen
32838 Object Select\nObject Select\nSelect
32839 Camera Zoom\nCamera Zoom\nZoom
32840 Camera Slide\nCamera Slide\nSlide
32841 Camera\n Camera
32842 Camera Walk\nCamera Walk\nWalk
32843 Camera Pan\nCamera Pan\nPan
32844 Camera Rotate\nCamera Rotate\nRotate
32845 3D Text\n3D Text
32846 Object Rotate\nObject Rotate\nRotate
32849 Selects and transforms objects; clicking twice on an object allows for rotating/skewing; double-clicking the tool selects all objects in drawing\nPick Tool\nPick
32850 Selects the last used tool on the Shape Edit Flyout\nLast Used Shape Edit Tool\n Edit
32851 Edits the nodes of an object; double-clicking the tool opens the Node Edit Roll-Up\nShape Tool\nShape
32852 Opens closed objects, breaks apart open objects\nKnife Tool\nKnife
32853 Erases part of a graphic or splits an object into two closed paths\nEraser Tool\nEraser
32854 Selects the last used Zoom tool\nLast Used Zoom Tool\n Zoom
32855 Zooms in and out of the drawing; click and drag to zoom in on a selected area, right click to zoom out\nZoom Tool\nZoom
32856 Pans around the drawing by clicking and dragging using this tool\nPan Tool\nPan
32857 Selects the last used Zoom tool\nLast Used Zoom Tool\n Zoom
32858 Selects the last used Curve tool\nLast Used Curve Tool\n Curve
32859 Draws lines and curves in Freehand mode\nFreehand Tool\nFreehand
32860 Draws lines and curves in Bezier mode\nBezier Tool\nBezier
32861 Draws curves using a fixed width, pressure-sensitive, calligraphic or preset Natural Pen style\nNatural Pen Tool\nNatural Pen
32862 Selects the last used Dimension tool\nDimension Tool\nDimension
32863 Joins two objects with a live connection\nConnector Line Tool\nConnector
32865 Draws vertical dimension lines for measuring distances\nVertical Dimension Tool\nVertical
32866 Draws horizontal dimension lines for measuring distances\nHorizontal Dimension Tool\nHorizontal
32867 Draws slanted dimension lines for measuring distances\nSlanted Dimension Tool\nSlanted
32868 Attaches callouts to objects\nCallout Tool\nCallout
32869 Draws angular dimension lines for measuring angles\nAngular Dimension Tool\nAngular
32870 Draws either horizontal or vertical dimension lines for measuring distances\nAuto Dimension Tool\nAuto
32871 Draws rectangles; double-clicking the tool creates a page frame\nRectangle Tool\nRectangle
32872 Draws ellipses and circles; double-clicking the tool opens the Toolbox tab of the Options dialog box\nEllipse Tool\nEllipse
32873 Selects the last used object tool\nLast Used Object Tool\n Object
32874 Draws symmetrical polygons; double-clicking opens the Toolbox tab of the Options dialog\nPolygon Tool\nPolygon
32875 Draws spirals; double-clicking opens the Toolbox tab of the Options dialog\nSpiral Tool\nSpiral
32876 Draws a group of rectangles; double-clicking opens the Toolbox tab of the Options dialog\nGraph Paper Tool\nGrid
32877 Adds text; click on the page to add Artistic Text; click and drag to add Paragraph Text\nText Tool\nText
32881 Adds outlines, outline colors, and line ending shapes to objects\nOutline Tool\nOutline
32883 Fills object(s) with uniform, fountain, pattern, texture or PostScript fills\nFill Tool\nFill
32884 Selects the last used tool on the Interactive Tool Flyout\nLast Used Interactive Tool\n Effects
32885 Adds a fill to object(s); clicking and dragging on object(s) applies a fountain fill\nInteractive Fill Tool\nFill
32886 Adds transparency to vector and bitmap object(s); clicking and dragging on object(s) applies a fountain transparency\nInteractive Transparency Tool\nTransparency
32887 Direct manipulation of extrudes for single object\nInteractive Extrude Tool\nExtrude
32888 Blends two objects by clicking and dragging between them using this tool\nInteractive Blend Tool\nBlend
32889 Rotates an object around a center specified by the first click-and-hold\nFree Rotation Tool\nRotate
32890 Reflects an object across a line\nFree Angle Reflection Tool\nReflect
32891 Scales an object relative to a distance from a center\nFree Scale Tool\nScale
32892 Skews an object relative to a distance from a center\nFree Skew Tool\nSkew
32893 Applies a Distortion to an object\nInteractive Distortion Tool\nDistort
32894 Applies an Envelope to an object\nInteractive Envelope Tool\nEnvelope
32895 Direct manipulation of drop shadows for objects\nInteractive Drop Shadow Tool\nDrop Shadow
32897 Selects the last used Free Transform tool\nFree Transform Tool\nTransform
32913 Contains tools for drawing, editing, shape creation, text entry, fill, and outline\nToolbox
32914 Provides access to the most commonly used functions\nStandard Toolbar\nStandard
32915 Provides access to styles and text properties\nText Toolbar\nText
32916 Provides access to zoom tools and one-shot zoom actions\nZoom Toolbar\nZoom
32917 Provides access to all Roll-Ups\nRoll-Ups Toolbar\nRoll-ups
32918 Provides control for visibility of tools in the workspace\nWorkspace Toolbar\nWorkspace
32919 Provides access to object and tool properties\nProperty Bar
32920 Provides access to the symbols, samples, clipart, photos, favorite fills and outlines and scripts\nLibrary Toolbar\nLibrary
32921 Provides controls for creating image maps for the Internet\nInternet Objects Toolbar\nInternet
32922 Shows and hides a toolbar that lets you apply transformations to objects\nTransform Toolbar\nTransform
32923 Contains 3D tools for zooming, and moving\n3D Toolbox
32929 Cancels the secondary mouse button drag operation
32930 Applies the selected style to the object
32931 Applies the fill property of the selected style to the object
32932 Applies the outline property of the selected style to the object
32933 Applies specified properties of the selected style to the object
32938 Moves the object here
32939 Copies the object here
32940 Copies the fill of the chosen object to this object
32941 Copies the outline of the chosen object to this object
32942 Copies all properties of the chosen object to this object
32943 Places the chosen object into this object; PowerClips the object
32950 Fits the selected blend along this path.
32951 Copies all properties of the chosen object to this entire group
33024 Saves all open drawings\nSave All
33025 Shows or hides the Status Bar\nShow Status Bar\nStatus Bar
33026 Shows or hides the Color Palette\nShow Color Palette\nColor Palette
33027 Monitors progress of multi-threaded tasks\nTask Progress
33028 Opens the dialog for customizing the CorelDRAW workspace and environment\nCustomize
33029 Opens an Object Manager view of the current drawing\nObject Manager
33031 Hides all Roll-Ups which are currently active\nHide Roll-Ups
33032 Shows all Roll-Ups that have been removed by Hide Rollups\nShow Roll-Ups
33035 Opens the Options dialog with the Edit options page selected\nEdit Options\nEdit
33036 Opens the Options dialog with the Display options page selected\nDisplay Options\nDisplay
33037 Opens the Options dialog with the General options page selected\nGeneral Options\nGeneral
33038 Selects object(s) by specified properties\nFind Wizard
33039 Globally or individually replaces specified object properties\nReplace Wizard
33043 Enables or disables interactive cursors which change depending upon the tool that you have selected (toggle)\nInteractive Cursors\nCursors
33044 Acquires an image using CorelSCAN; CorelSCAN is a wizard-driven scanning utility\nAcquire using CorelSCAN\nCorelSCAN
33046 Closes all windows\nClose all Windows
33047 Retrieve a past version of a document from the archive\nRetrieve Version
33048 Archive the present document\nArchive Document
33049 Retrieve a document from a Corel Versions archive on disk\nRetrieve Archive
33050 Opens the Options dialog with the Memory options page selected\nBitmap Memory Options\nMemory
33051 Shows the frame for unselected paragraph text\nShow Text Frames
33540 Imports text or objects\nImport
33541 Exports text or objects to another format\nExport
33542 Prints the active drawing\nPrint
33543 Prints the active drawing with substitution text\nPrint Merge
33544 Changes the printer and the printing options\nPrint Setup
33545 Shows pages as they will be printed and allows print settings to be changed\nPrint Preview
33546 Gathers the necessary files to be sent to your service bureau in preparation for professional output\nPrepare For Service Bureau\nService Bureau
33547 Displays the document Info\nDocument Info
33548 Reverses the last operation\nUndo
33549 Reverses the last Undo operation\nRedo
33550 Repeats the last operation\nRepeat
33551 Cuts the selection and places it on the Clipboard\nCut
33552 Copies the selection and places it on the Clipboard\nCopy
33553 Pastes the Clipboard contents into the drawing\nPaste
33554 Pastes an OLE object into the drawing\nPaste OLE Object\nPaste OLE
33555 Deletes the selected object(s)\nDelete
33556 Duplicates the selected object(s) and offsets by a specified amount\nDuplicate
33557 Clones the selected object(s)\nClone
33558 Copies specified properties to the selected object(s) from another object\nCopy Properties
33559 Selects the entire drawing\nSelect All
33560 Selects an object across several frames\nSelect Across Frames
33561 Edits OLE Objects\nEdit OLE Object
33562 Edits this OLE Object\nEdit OLE Object
33566 Allows links to be viewed, opened, updated, or removed\nEdit Links
33567 Inserts the specified number of pages in the drawing\nInsert Page
33568 Deletes specified pages from the drawing\nDelete Page
33569 Jumps to a specified page in the drawing\nGo to Page
33570 Changes the page setup options \nPage Setup
33571 Opens the Grids & Guidelines page in the Options dialog box\nGrid Setup
33572 Opens the Guidelines Setup dialog box\nGuideline Setup
33573 Places the selected object(s) to the front\nTo Front
33574 Places the selected object(s) to the back\nTo Back
33575 Places the selected object(s) forward one position in the object stacking order\nForward One
33576 Places the selected object(s) back one position in the object stacking order\nBack One
33577 Places the selected object(s) in front of a specified object\nIn Front Of
33578 Places the selected object(s) behind a specified object\nBehind
33579 Reverses the stacking order of the selected objects\nReverse Order
33580 Groups the selected objects\nGroup
33581 Ungroups the selected objects or group of objects\nUngroup
33582 Ungroups all grouped objects within the current selection\nUngroup All
33583 Combines the selected objects\nCombine
33584 Breaks apart the selected object\nBreak Apart
33585 Separates the selected objects\nSeparate
33586 Converts the selected object to a curve; converting to curves can provide for more flexible editing\nConvert To Curves\nTo Curves
33587 Shows or hides the grid (toggle)\nShow Grid\nGrid
33588 Shows or hides the guidelines (toggle)\nShow Guidelines\nGuidelines
33589 Shows or hides the Printable Area (toggle)\nShow Printable Area\nPrint Area
33590 Drapes or maintains individual special fills across a group (toggle); draped fills use the group's bounding box when displayed\nDrape Fills
33591 Converts the selected object(s) to a 3D object\nConvert To 3D
33592 Selects all guidelines in the drawing\nSelect All Guidelines
33593 Selects all text in the drawing\nSelect All Text
33594 Shows objects containing Overprinted fills and/or outlines with special fill\nShow Overprinted Objects\nOverprint
33601 Clears transformations such as scaling, rotating and skewing from the selected object(s)\nClear Transformations
33602 Adds perspective to the selected object or group\nPerspective
33603 Places selected object(s) into a PowerClip container object\nPlace Inside
33604 Extracts the contents (objects) from a PowerClip container object\nExtract Contents
33605 Allows editing of the object(s) inside a PowerClip container object\nEdit Contents
33606 Ends the PowerClip editing operation\nStop Editing Contents
33607 Clears special effects from the selected object(s)\nClear Effect
33608 Copies perspective to selected object(s) from another object\nCopy Perspective
33609 Copies an envelope to selected object(s) from another object\nCopy Envelope
33610 Copies a blend to selected object(s) from another object\nCopy Blend
33611 Copies an extrude to selected object(s) from another object\nCopy Extrude
33612 Copies a contour to selected object(s) from another object\nCopy Contour
33613 Copies PowerLine to selected object(s) from another object\nCopy PowerLine
33614 Copies a lens to selected object(s) from another object\nCopy Lens
33615 Copies a PowerClip to selected object(s) from another object\nCopy PowerClip
33616 Clones a blend to selected object(s) from another object\nClone Blend
33617 Clones an extrude to selected object(s) from another object\nClone Extrude
33618 Clones a contour to selected object(s) from another object\nClone Contour
33619 Clones a PowerLine to selected object(s) from another object\nClone PowerLine
33620 Formats the properties of text\nFormat Text\nFormat
33621 Adds 3D extrusion to text\nExtrude Text\nExtrude
33623 Aligns text to the baseline\nAlign To Baseline
33624 Straightens text characters which have been shifted\nStraighten Text
33625 Shrink or expand text size to fill the text frame\nFit Text To Frame
33626 Changes the case of selected text\nChange Case
33627 Changes the case of the selected text string(s) to sentence case\nSentence Case
33628 Changes the case of the selected text string(s) to lowercase\nLowercase
33629 Changes the case of the selected text string(s) to uppercase\nUppercase
33630 Changes the case of the selected text string(s) to title case\nTitle Case
33631 Toggles the case of each character of the selected text string(s)\nToggle Case
33632 Converts artistic text to paragraph text or vice versa\nConvert Text
33633 Opens the Spell Checker; checks the spelling of the selected text\nSpelling
33634 Finds the specified text in the drawing\nFind Text
33635 Finds and replaces specified text in the drawing\nReplace Text
33636 Opens the Edit Text dialog box\nEdit Text
33637 Opens the Options dialog with the Type Assist options page selected; provides options for common error correction and replacement text\nType Assist Options\nType Assist
33638 Opens the Thesaurus; provides synonym(s) for the selected word\nThesaurus
33639 Opens the Japanese language preferences dialog box\nJapanese Preferences
33640 Replaces the selected error with this alternative
33641 Deletes the selected error
33642 Ignores all instances of the selected error
33643 Adds the selected error to a personal dictionary
33644 Unignores all instances of the selected error
33645 Toggles the selected text to be HTML compatible\nMake Text HTML compatible\nHTML
33646 Opens the Options dialog with the Spelling options page selected; provides Automatic Spell Checking options\nSpelling Options\nSpelling
33647 Opens the Options dialog with the Font options page selected\nFont Options\nFonts
33648 Selects the start object of the blend
33649 Allows for the selection of a new start object for the blend
33650 Selects the end object of the blend
33651 Allows for the selection of a new end object for the blend
33652 Selects the path used by the selected blend
33653 Allows for the selection of a new path for the blend
33654 Removes the selected blend from its path
33655 Increases font size to next point size.\nFont Size Increase
33656 Increase font size to next setting in Font Size List\nFont Size Next Combo Size
33657 Decreases font size to previous point size.\nFont Size Decrease
33658 Decrease font size to previous setting available in the Font Size List\nFont Size Previous Combo Size
33659 Repeats object(s) along a specified path\nRepeat Objects
33660 Opens the Fit Text to Path Roll-Up\nFit Text To Path Roll-Up\nFit Text To Path
33661 Copies a Shadow to selected object(s) from another object\nCopy Shadow
33662 Clones a Shadow to selected object(s) from another object\nClone Shadow
33663 Copies a distortion to selected object(s) from another object\nCopy Distortion
33666 Creates a two-color or full-color pattern by selecting an area\nCreate Pattern
33667 Creates an arrow from the selected object\nCreate Arrow
33668 Creates a symbol from the selected object\nCreate Symbol
33669 Saves text from drawing to an ASCII text file\nExtract Text
33670 Merges back text from an ASCII text file to the drawing\nMerge Text
33672 Sends drawing through electronic mail or fax\nSend
33677 Allows the properties of an object to be viewed and edited\nObject Properties\nProperties
33678 Opens the Options dialog with the Text options page selected\nText Options\nText
33679 Opens the Text Statistics dialog\nStatistics
33680 Shows a list of all the available/active fonts\nFont List
33682 Shows a list of all the available/active font sizes\nFont Size List
33683 Shows a list of all the available/active font sizes\nFont Size List
33684 Shows a list of all the available/active font weights\nFont Weight List
33685 Shows a list of all the available/active font weights\nFont Weight List
33686 Changes the style of text to bold\nBold
33687 Changes the style of text to italic\nItalic
33688 Changes the style of text to underline\nUnderline
33689 Changes the style of text to superscript\nSuperscript
33690 Changes the style of text to subscript\nSubscript
33691 Changes all text characters to capital letters\nAll Capitals
33692 Changes the alignment of text to left alignment\nLeft Alignment\nLeft
33693 Changes the alignment of text to center alignment\nCenter Alignment\nCenter
33694 Changes the alignment of text to right alignment\nRight Alignment\nRight
33695 Changes the alignment of text to full alignment\nFull Alignment\nFull
33696 Changes the alignment of text to force last line full alignment\nForce Full Alignment\nForce Full
33697 Changes the alignment of text to have no alignment\nNo Alignment\nNone
33698 Changes the spacing of text to have 1 line spacing\n1 Line Spacing
33699 Changes the spacing of text to have 1.5 line spacing\n1.5 Line Spacing
33700 Changes the spacing of text to have 2 line spacing\n2 Line Spacing
33701 Adds/removes bullets for the text object (toggle)\nShow/Hide Bullet\nBullet
33702 Adds/removes a Drop Cap for the text object (toggle)\nShow/Hide Drop Cap\nDrop Cap
33703 Increases the text indent\nIncrease Indent\nIndent +
33704 Decreases the text indent\nDecrease Indent\nIndent -
33705 Changes all text characters to small capital letters\nAll Small Capitals
33706 Changes the text to vertical (toggle)\nVertical Text
33707 Opens last saved version from disk\nRevert
33709 Lock selected object(s)\nLock
33710 Unlock selected object(s)\nUnlock
33711 Unlock all locked object(s)\nUnlock All
33712 Changes the text to horizontal direction \nHorizontal Text
33713 Creates and Saves a new Palette from the colors of the selection\nCreate New Palette from selection
33714 Creates and Saves a new Palette from the colors of the document\nCreate New Palette from document
33715 Opens the dialog for setting CorelDRAW options\nOptions
33716 Shows a list of all the available/active HTML font sizes\nHTML Font Size List
33717 Shows a list of all the available/active HTML font sizes\nHTML Font Size List
33729 Shows a list of all the styles in the drawing\nStyle List
33730 Shows a list of all the styles in the drawing\nStyle List
33731 Allows the properties of a style to be viewed and edited\nStyle Properties
33732 Displays Object or Tool Properties depending on the current selection or tool\nProperties
33733 Closes the active drawing\nClose
33734 Formats the size of artistic characters and text\nFont Size
33735 Saves selected object's style under a new name\nSave Style
33736 Updates an existing style\nUpdate Style
33737 Reverts to the previous style\nRevert To Style
33738 Reverts the style of the selected clone object to the style of its master object\nRevert Clones
33739 Overprints the object's outline \nOverprint Outline
33740 Overprints the object's fill\nOverprint Fill
33741 Locks or Unlocks the contents of a PowerClip object (toggle); locking the contents moves the contents with the container\nLock Contents to PowerClip
33742 Opens the More Styles dialog box\nStyles
33743 Applies the selected style to a selected object\nApply Style
33808 Adds a frame to the printable page\nAdd Page Frame
33809 Opens the Outline Pen dialog box\nOutline Pen Dialog\nPen
33810 Removes the outline from the selected objects\nNo Outline\nNone
33811 Adds an outline of 1/4 point to the selected objects\nHairline Outline\nHairline
33812 Adds an outline of 1/2 point to the selected objects\n1/2 Point Outline\n1/2 pnt
33813 Adds an outline of 1 point to the selected objects\n1 Point Outline\n1 pnt
33814 Adds an outline of 2 points to the selected objects\n2 Point Outline (Thin)\n2 pnt
33815 Adds an outline of 4 points to the selected objects\n4 Point Outline\n4 pnt
33816 Adds an outline of 8 points to the selected objects\n8 Point Outline (Medium)\n8 pnt
33817 Adds an outline of 12 points to the selected objects\n12 Point Outline\n12 pnt
33818 Adds an outline of 16 points to the selected objects\n16 Point Outline (Medium-Thick)\n16 pnt
33819 Adds an outline of 20 points to the selected objects\n20 Point Outline\n20 pnt
33820 Adds an outline of 24 points to the selected objects\n24 Point Outline (Thick)\n24 pnt
33821 Opens the Outline Color dialog box\nOutline Color Dialog\nColor
33822 Adds a white outline to the selected objects\nWhite Outline Color\nWhite
33823 Adds outline of 10% black to the selected objects\n10% Black Outline Color\n10% Black
33824 Adds outline of 20% black to the selected objects\n20% Black Outline Color\n20% Black
33825 Adds outline of 30% black to the selected objects\n30% Black Outline Color\n30% Black
33826 Adds outline of 40% black to the selected objects\n40% Black Outline Color\n40% Black
33827 Adds outline of 50% black to the selected objects\n50% Black Outline Color\n50% Black
33828 Adds outline of 60% black to the selected objects\n60% Black Outline Color\n60% Black
33829 Adds outline of 70% black to the selected objects\n70% Black Outline Color\n70% Black
33830 Adds outline of 80% black to the selected objects\n80% Black Outline Color\n80% Black
33831 Adds outline of 90% black to the selected objects\n90% Black Outline Color\n90% Black
33832 Adds a black outline to the selected objects\nBlack Outline Color\n100% Black
33833 Causes paragraph text to flow around this object; text wrap offset can be set in the Object Properties dialog for this object\nWrap Paragraph Text\nWrap Text
33857 Applies uniform color fills to objects\nFill Color Dialog\nColor
33858 Applies fountain fills to objects\nFountain Fill Dialog\nFountain
33859 Applies a pattern fill to objects\nPattern Fill Dialog\nPattern
33860 Applies a two-color bitmap pattern fill to objects\nTwo-Color Fill Dialog\nTwo-Color
33861 Applies full-color patterns to objects\nFull-Color Pattern Dialog\nFull-Color
33862 Applies texture fills to objects\nTexture Fill Dialog\nTexture
33863 Applies PostScript fills to objects; PostScript fills can be viewed in Enhanced View\nPostScript Fill Dialog\nPostScript
33864 Removes fill from selected objects\nNo Fill
33865 Applies a white fill to selected objects\nWhite Fill\nWhite
33866 Applies a fill of 10% black to selected objects\n10% Black Fill\n10% Black
33867 Applies a fill of 20% black to selected objects\n20% Black Fill\n20% Black
33868 Applies a fill of 30% black to selected objects\n30% Black Fill\n30% Black
33869 Applies a fill of 40% black to selected objects\n40% Black Fill\n40% Black
33870 Applies a fill of 50% black to selected objects\n50% Black Fill\n50% Black
33871 Applies a fill of 60% black to selected objects\n60% Black Fill\n60% Black
33872 Applies a fill of 70% black to selected objects\n70% Black Fill\n70% Black
33873 Applies a fill of 80% black to selected objects\n80% Black Fill\n80% Black
33874 Applies a fill of 90% black to selected objects\n90% Black Fill\n90% Black
33875 Applies a black fill to selected objects\nBlack Fill\n100% Black
33876 Applies full-color bitmap patterns to objects\nFull-Color Bitmap Pattern
33877 Welds the selected objects\nWeld
33878 Welds the selected object(s) to a target\nWeld Target
33879 Creates an object from the intersection of the selected objects\nIntersect
33880 Creates an object from the intersection of the selected object and a target\nIntersect Target
33881 Trims the last-selected object with the shape of the other object(s)\nTrim
33882 Trims the target object using the selected object(s)\nTrim Target
33883 Adds a node when editing the width of a PowerLine\nAdd PowerLine Node
33884 Deletes a node when editing the width of a PowerLine\nDelete PowerLine Node
33885 Straightens a section of a PowerLine when editing its width\nStraighten PowerLine Segment
33886 Curves a section of a PowerLine when editing its width\nCurve PowerLine Segment
33887 Makes a section of a PowerLine concave when editing its width\nConcave PowerLine
33888 Makes a section of a PowerLine convex when editing its width\nConvex PowerLine
33889 Reduces the number of nodes on a PowerLine when editing its width\nAuto-Reduce PowerLine Nodes
33890 Manages the Internet bookmarks present in the document\nInternet Bookmark Manager\nBookmarks
33921 Edits the bitmap image in Corel PHOTO-PAINT\nEdit Bitmap
33922 Closes a curve by averaging the position of the two end points\nJoin Two Nodes\nJoin
33923 Adds node(s) to the edited curve\nAdd Node(s)\nAdd
33924 Deletes the selected node(s)\nDelete Node(s)\nDelete
33925 Joins the selected nodes\nJoin Two Nodes\nJoin
33926 Breaks a curve at the selected point\nBreak Curve\nBreak
33927 Converts the selected node(s) to cusps\nMake Node A Cusp\nCusp
33928 Makes the curve smooth at the selected point\nMake Node Smooth\nSmooth
33929 Converts the curve segment(s) to line segment(s)\nConvert Curve To Line\nLine
33930 Converts the line segment(s) to curve segment(s)\nConvert Line To Curve\nCurve
33931 Makes the curve symmetrical at the selected point\nMake Node Symmetrical\nSymmetrical
33932 Aligns the selected nodes\nAlign Nodes\nAlign
33933 Auto-reduces the selected nodes\nAuto-Reduce Curve\nAuto-Reduce
33934 Turns elastic-mode editing on or off (toggle)\nElastic Mode\nElastic
33936 Scales and/or stretches the selected nodes\nStretch and Scale Nodes\nScale
33937 Rotates and/or skews the selected nodes\nRotate and Skew Nodes\nRotate && Skew
33938 Extracts the subpath containing the selected node(s)\nExtract Subpath\nExtract
33939 Merges a selected object\nMerge Subpath\nMerge
33940 Closes a curve by adding a line segment\nExtend Curve to Close\nClose
33941 Replaces the selected error with this alternate spelling
33942 Replaces the selected error with this alternate spelling
33943 Replaces the selected error with this alternate spelling
33944 Replaces the selected error with this alternate spelling
33945 Replaces the selected error with this alternate spelling
33946 Replaces the selected error with this alternate spelling
33947 Replaces the selected error with this alternate spelling
33948 Replaces the selected error with this alternate spelling
33949 Replaces the selected error with this alternate spelling
33950 Replaces the selected error with this alternate spelling
33951 Adds the selected error to a personal dictionary
33952 Adds the selected error to a personal dictionary
33953 Adds the selected error to a personal dictionary
33954 Adds the selected error to a personal dictionary
33955 Adds the selected error to a personal dictionary
33956 Adds the selected error to a personal dictionary
33957 Adds the selected error to a personal dictionary
33958 Adds the selected error to a personal dictionary
33959 Adds the selected error to a personal dictionary
33960 Adds the selected error to a personal dictionary
33985 Changes the vertical alignment of text to top alignment\nTop Vertical Alignment
33986 Changes the vertical alignment of text to center alignment\nCenter Vertical Alignment
33987 Changes the vertical alignment of text to bottom alignment\nBottom Vertical Alignment
33988 Changes the vertical alignment of text to full alignment\nFull Vertical Alignment
33989 Opens the Align and Distribute dialog\nAlign and Distribute
33990 Aligns selected objects to the left\nAlign Left
33991 Vertically aligns the centers of the selected objects\nAlign Centers Vertically
33992 Aligns selected objects to the right\nAlign Right
33993 Aligns selected objects to the top\nAlign Top
33994 Horizontally aligns the centers of the selected objects\nAlign Centers Horizontally
33995 Aligns selected objects to the bottom\nAlign Bottom
33999 Provides helpful information on the selected item\nWhat's This?
34001 Converts the selected object(s) to a bitmap\nConvert To Bitmap
34003 Publishes document to WYSIWYG HTML, Corel Barista or Internet image map\nPublish To Internet\nInternet
34004 Opens the Publish To Internet Wizard\nPublish To Internet Wizard\nInternet
34006 Opens the Roll-Up for the selected special effect\nSpecial Effect Roll-Up\nSpecial Effects
34007 Inserts a page after current page\nInsert Page After
34008 Inserts a page before current page\nInsert Page Before
34009 Deletes current page\nDelete Page
34010 Automatically inflates the size of a Bitmap when effects are applied (toggle)\nAuto Inflate Bitmap\nAuto Inflate
34011 Opens Inflate Bitmap dialog to add white-space around a bitmap\nManual Bitmap Inflation\nManual Inflate
34012 Renames current page\nRename Page
34562 Inserts an object from another application into your drawing\nInsert Object
34563 Opens the Bar Code Wizard; inserts a new bar code object into the drawing\nBar Code
34564 Shows or hides the rulers (toggle)\nShow Rulers\nRulers
34565 Shows only the basic wireframe of the drawing (toggle); i.e. only control objects of blends, extrudes and contours are shown\nSimple Wireframe
34566 Shows only the wireframe of the drawing (toggle); i.e. fills are not shown and bitmaps are shown in grayscale\nWireframe
34567 Shows a draft view of the drawing (toggle); faster but less detailed than Normal view\nDraft
34568 Shows the normal view of the drawing (toggle); this is the default view quality in CorelDRAW\nNormal
34569 Shows an enhanced view of the drawing (toggle); super-sampling smooths the display of objects\nEnhanced
34570 Toggles between the last two used view qualities\nToggle View
34572 Displays a full-screen preview of the drawing\nFull-screen Preview
34573 Displays a full-screen preview of selected objects only\nPreview Selected
34574 Redraws the drawing window\nRedraw
34575 Snaps objects to the grid (toggle)\nSnap To Grid\nSnap Grid
34576 Snaps objects to the guidelines (toggle)\nSnap To Guidelines\nSnap Guideline
34577 Snaps objects to other objects (toggle)\nSnap To Objects\nSnap Object
34578 Turns on snap to grid, guidelines and objects\nSnap to All
34579 Turns all snapping off\nSnap to None
34580 Selects the master object of the selected clone\nSelect Master
34581 Selects the clones of the selected master object\nSelect Clones
34582 Goes to the previous page\nPrevious Page
34583 Goes to the next page\nNext Page
34584 Toggles between the current tool and the Pick tool\nToggle Pick State
34585 Enables temporary node editing state when cursor tracks over nodes\nEnable Node Tracking\nTracking
34626 Inserts a new CorelMEMO object\nCorelMEMO
34643 Changes the default settings for new CorelDRAW graphic documents\nSave Settings
34656 Copies special effects from one object to another\nCopy Effect
34657 Clones an effect from one object to another\nClone Effect
34689 Zooms in on the drawing\nZoom In
34690 Zooms out on the drawing\nZoom Out
34691 Zooms out on the drawing\nZoom Out
34692 Shows the drawing at the size at which it will print\nZoom Actual Size\nActual Size
34693 Zooms in on selected objects only\nZoom To Selected\nSelected
34694 Zooms in on all objects in the drawing\nZoom To All Objects\nAll Objects
34695 Displays the entire printable page\nZoom To Page\nPage
34696 Pans around the drawing then returns to the previous tool\nPan One-Shot\nPan
34699 Zooms in on the page width\nZoom To Page Width\nWidth
34713 Zooms in to show the page at 400% of its size\n400% Zoom
34714 Zooms in to show the page at 200% of its size\n200% Zoom
34715 Zooms to show 100% of the page\n100% Zoom
34716 Zooms out to show the page at 75% of its size\n75% Zoom
34717 Zooms out to show the page at 50% of its size\n50% Zoom
34718 Zooms out to show the page at 25% of its size\n25% Zoom
34719 Zooms out to show the page at 10% of its size\n10% Zoom
34721 Zooms in by a factor of 2\n2X Zoom
34724 Pans the drawing to the left\nPan Left
34725 Pans the drawing to the right\nPan Right
34726 Pans the drawing upward\nPan Up
34727 Pans the drawing downward\nPan Down
34730 Nudges the object to the left\nNudge Left
34731 Nudges the object to the right\nNudge Right
34732 Nudges the object upward\nNudge &Up
34733 Nudges the object downward\nNudge &Down
34734 Nudges the object to the left by the Super Nudge factor\nSuper Nudge Left
34735 Nudges the object to the right by the Super Nudge factor\nSuper Nudge Right
34736 Nudges the object upward by the Super Nudge factor\nSuper Nudge Up
34737 Nudges the object downward by the Super Nudge factor\nSuper Nudge Down
34738 Zooms in on the page height\nZoom To Page Height\nHeight
34739 Zooms/Pans around the drawing and returns to the previous tool\nZoom/Pan One-Shot\nZoom
34753 Moves the text caret left 1 character\nMove Left 1 Character
34754 Moves the text caret right 1 character\nMove Right 1 Character
34755 Moves the text caret left 1 word\nMove Left 1 Word
34756 Moves the text caret right 1 word\nMove Right 1 Word
34757 Moves the text caret up 1 line\nMove Up 1 Line
34758 Moves the text caret down 1 line\nMove Down 1 Line
34759 Moves the text caret up 1 paragraph\nMove Up 1 Paragraph
34760 Moves the text caret down 1 paragraph\nMove Down 1 Paragraph
34761 Moves the text caret up 1 frame\nMove Up 1 Frame
34762 Moves the text caret down 1 frame\nMove Down 1 Frame
34763 Moves the text caret to the beginning of the line\nMove to Beginning of Line
34764 Moves the text caret to the end of the line\nMove to End of Line
34765 Moves the text caret to the beginning of the frame\nMove to Beginning of Frame
34766 Moves the text caret to the end of the frame\nMove to End of Frame
34767 Moves the text caret to the beginning of the text\nMove to Beginning of Text
34768 Moves the text caret to the end of the text\nMove to End of Text
34769 Selects the character to the left of the text caret\nSelect Left 1 Character
34770 Selects the character to the right of the text caret\nSelect Right 1 Character
34771 Selects the word to the left of the text caret\nSelect Left 1 Word
34772 Selects the word to the right of the text caret\nSelect Right 1 Word
34773 Selects text upwards by 1 line\nSelect Up 1 Line
34774 Selects text downwards by 1 line\nSelect Down 1 Line
34775 Selects text upwards by 1 paragraph\nSelect Up 1 Paragraph
34776 Selects text downwards by 1 paragraph\nSelect Down 1 Paragraph
34777 Selects text upwards by 1 frame\nSelect Up 1 Frame
34778 Selects text downwards by 1 frame\nSelect Down 1 Frame
34779 Selects text to the beginning of the line\nSelect to Beginning of Line
34780 Selects text to the end of the line\nSelect to End of Line
34781 Selects text to the beginning of the frame\nSelect to Beginning of Frame
34782 Selects text to the end of the frame\nSelect to End of Frame
34783 Selects text to the beginning of the text\nSelect to Beginning of Text
34784 Selects text to the end of the text\nSelect to End of Text
34785 Deletes the character to the left of the text caret\nDelete Character to left
34786 Deletes the word to the left of the text caret\nDelete Word to Left
34787 Deletes the character to the right of the text caret\nDelete Character to Right
34788 Deletes the word to the right of the text caret\nDelete Word to Right
34789 Increases the kerning between selected characters\nIncrease Kerning
34790 Decreases the kerning between selected characters\nDecrease Kerning
34791 Collapses paragraph to show a single line\nCollapse Paragraph
34792 Expands paragraph to a show all lines\nExpand Paragraph
34795 Closes active window\nClose Window
34817 Adjusts the brightness, contrast, and intensity of the bitmap\nAdjusts Brightness, Contrast, and Intensity\nBCI
34818 Enhances details in a bitmap by adjusting middle grayscale values (gamma)\nAdjusts Gamma\nGamma
34819 Balances bitmap colors by changing the mixture of colors in a bitmap\nBalances Bitmap Colors\nBalance
34820 Posterizes image colors to remove gradations, creating a simplified image\nPosterizes Bitmap\nPosterize
34821 Adjusts a bitmap's hue, saturation, and lightness (without affecting the brightness), to correct for color shifts\nAdjusts Hue, Saturation, and Lightness\nHSL
34822 Adds different outline effects to a bitmap, including color and edge sensitivity.\nHighlight Edges\nEdges
34823 Adjusts the offset of a bitmap\nOffset Bitmap\nOffset
34824 Applies a pixelation to bitmap; adds a block-like appearance to the bitmap\nApplies a Pixelating Effect\nPixelate
34825 Applies a swirl effect; rotates and drags the bitmap in the designated angle\nApplies a Swirling Effect\nSwirl
34826 Applies a wet paint effect; makes the bitmap appear as if it is dripping fresh paint\nApplies a Wet Paint Effect\nWet Paint
34827 Inverts the bitmap's colors precisely to resemble those of a photographic negative\nInverts Bitmap Colors\nInvert
34828 Applies a gaussian blur to the bitmap; creates a hazy effect; can be used to create realistic drop shadows\nApplies a Gaussian Blur to Bitmap\nGaussian
34829 Applies a motion blur to the bitmap; creates the impression of movement\nApplies a Motion Blur to Bitmap\nMotion
34830 Smooths the bitmap; tones down the differences between adjacent pixels with a marginal loss of detail\nApplies a Smoothing to Bitmap\nSmooth
34831 Adds noise to the bitmap; creates a granular effect that adds texture to a flat or overly blended bitmap\nAdds Noise to Bitmap\nNoise
34832 Removes noise from the bitmap; softens edges and reduces the speckled effect that is created by the scanning process\nRemoves Noise from Bitmap\nRemove Noise
34833 Applies convolution sharpening; improves the resolution of the bitmap or the defined area\nApplies a Convolution Sharpening Effect\nSharpen
34834 Unsharpens the bitmap; accentuates edge detail and sharpens smooth areas\nApplies an Unsharp Masking Effect\Unsharpen
34835 Solarizes the bitmap; lets you control the degree to which the current bitmap resembles a photographic negative\nApplies a Solarize Filter Effect\nSolarize
34836 Rotates the bitmap in 3D space; rotates the bitmap as if it were three dimensional\nRotates Bitmap in Three Dimensions\Rotate 3D
34837 Applies an emboss effect to the bitmap; creates a three-dimensional relief effect\nApplies a Three-Dimensional Relief Effect\nRelief
34838 Curls the edge of the bitmap; rolls a corner of the paper over part of the bitmap\nApplies a Page Curl Effect\nPage Curl
34839 Applies 3D perspective to the bitmap\nApplies a 3D Perspective Effect\n3D Perspective
34840 Applies a Pinch/Punch effect to the bitmap; causes the bitmap to appear as if it has been pulled out or pushed in\nApplies a Pinch/Punch Effect\nPintch/Punch
34841 Applies a 3D Object Mapping effect to the bitmap; creates the illusion of the bitmap being wrapped around the surface of a sphere or cylinder\nApplies a 3D Object Mapping Effect\n3D Mapping
34842 Applies a Glass Block effect to the bitmap; causes the bitmap to appear as though it were constructed of glass blocks\nApplies a Glass Block Effect\nGlass Block
34843 Applies an Impressionist Brush effect to the bitmap; applies impressionist-like brush strokes to the bitmap\nApplies an Impressionist Brush to Bitmap effect\nImpressionist
34844 Applies a Photo Vignette effect to the bitmap; applies an oval opaque mask around the perimeter of the bitmap\nApplies a Photo Vignette Filter Effect\nVignette
34845 Applies a Psychedelic effect; changes the colors of a bitmap to bright, electric colors such as orange, hot pink and more\nApplies a Psychedelic Filter Effect\nPsychedelic
34846 Resamples the bitmap by changing its size and/or resolution\nResamples the Bitmap\nResample
34847 Converts a bitmap to black and white (1-bit)\nConvert to black and white\nB&&W
34848 Converts a bitmap to 16-color (4-bit)\nConvert to 16-color\n16-Color
34849 Converts a bitmap to 256 grayscale\nConvert to 256 grayscale\nGrayscale
34850 Converts a bitmap into a monotone (one ink), duotone (two ink), tritone (three ink), or quadtone (four ink) bitmap; duotones can only be applied to grayscale bitmaps\nConvert to Duotone\nDuotone
34851 Edits a duotone bitmap\nEdit Duotone
34852 Converts a bitmap to a paletted color\nConvert to Paletted\nPaletted
34853 Converts a bitmap to 24-bit RGB color\nConvert to RGB color\nRGB
34854 Converts a bitmap to 32-bit CMYK color\nConvert to CMYK color\nCMYK
34855 Converts a bitmap to Lab colors (24-bit)\nConvert to Lab color (24-bit)\nLAB
34856 Resolve link to Bitmap
34857 Update preview from linked bitmap
34864 Inserts an HTML Form Object Radio Button\nInsert Radio Button
34865 Inserts an HTML Form Object Check Box\nInsert Check Box
34866 Inserts an HTML Form Object Submit Button\nInsert Submit Button
34867 Inserts an HTML Form Object Reset Button\nInsert Reset Button
34868 Inserts an HTML Form Object Text Input Field\nInsert Text Input Field
34869 Inserts an HTML Form Object Text Input Box\nInsert Text Input Box
34870 Inserts an HTML Form Object Popup Menu\nInsert Popup Menu
34871 Inserts an HTML Form Object Options List\nInsert Options List
34872 Inserts a placeholder for a JAVA Applet\nInsert a JAVA Applet
34873 Inserts an HTML Form Object Simple Button\nInsert Simple Button
34874 Inserts a placeholder for a file\nInsert an Embedded object
35088 Opens the View Manager Docker Window\nView Manager
35090 Opens the Graphic and Text Styles Docker Window\nGraphic and Text Styles\nStyles
35091 Opens the Object Data editor\nObject Data
35092 Opens the Symbols Docker Window\nSymbols
35093 Opens the Presets Roll-Up\nPresets Roll-Up
35094 Opens the Envelope Roll-Up\nEnvelope Roll-Up\nEnvelope
35095 Opens the Blend Roll-Up\nBlend Roll-Up\nBlend
35096 Opens the Contour Roll-Up\nContour Roll-Up\nContour
35097 Opens the PowerLine Roll-Up\nPowerline Roll-Up
35098 Opens the Lens Roll-Up\nLens Roll-Up\nLens
35099 Opens the Bitmap Color Mask Roll-Up; masks a selected color or range of colors in a bitmap\nBitmap Color Mask Roll-Up\nMask
35100 Opens the Color Roll-Up\nColor Roll-Up\nColor
35101 Contains tools for shaping the nodes of an object or curve\nNode Edit Roll-Up\nNode Edit
35102 Contains functions for assigning attributes to linear dimension lines\nLinear Dimensions Roll-Up\nLinear
35103 Contains functions for assigning attributes to angular dimension lines\nAngular Dimensions Roll-Up\nAngular
35104 Opens the Weld Roll-Up\nWeld Roll-Up\nWeld
35105 Opens the Intersect Roll-Up\nIntersect Roll-Up\nIntersect
35106 Opens the Trim Roll-Up\nTrim Roll-Up\nTrim
35107 Selects object(s) with specific properties\nSelect by Properties Roll-Up\nSelect Props
35108 Opens the Special Fill Roll-Up\nSpecial Fill Roll-Up\nFill
35109 Opens the Pen Roll-Up\nPen Roll-Up\nPen
35110 Opens the Position Roll-Up\nPosition Roll-Up\nPosition
35111 Opens the Rotate Roll-Up\nRotate Roll-Up\nRotate
35112 Opens the Scale and Mirror Roll-Up\nScale and Mirror Roll-Up\nScale && Mirror
35113 Opens the Skew Roll-Up\nSkew Roll-Up\nSkew
35114 Opens the Size Roll-Up\nSize Roll-Up\nSize
35115 Opens the last selected Transform Roll-Up\nLast Selected Transform Roll-Up\nTransform
35116 Opens the Extrude Roll-Up\nExtrude Roll-Up\nExtrude
35117 Opens the Color Styles Docker Window\nColor Styles
35121 Opens the Scrapbook Docker Window\nScrapbook
35122 Opens the Clipart tab of the Scrapbook\nClipart Scrapbook Tab\nClipart
35123 Opens the Photos tab of the Scrapbook\nPhotos Scrapbook Tab\nPhotos
35124 Opens the Browse tab of the Scrapbook\nBrowse Scrapbook Tab\nBrowse
35125 Opens the Favorite Fills and Outlines tab of the Scrapbook\nFavorite Fills and Outlines Scrapbook Tab\nFills && Outlines
35126 Opens the Favorite Outlines Scrapbook\nFavorite Outlines Scrapbook Tab\nOutlines
35127 Opens the Object Manager Docker Window\nObject Manager
35128 Opens the 3D Models tab of the Scrapbook\n3D Models Scrapbook Tab\n3D Models
35130 Opens the HTML Object Conflict Docker Window\nHTML Object Conflict
35137 Opens the FTP Sites tab of the Scrapbook\nFTP Sites Scrapbook Tab\nFTP
35200 Opens this rollup group
35201 Opens %s rollup group
35587 Changes position of the selected object(s) based on the ruler coordinates entered here\nObject(s) Position\nPosition
35588 Changes position of the selected object(s) based on the ruler coordinates entered here\nObject(s) Position\nPosition
35589 Sizes the object(s) based on the values entered here\nObject(s) Size\nSize
35590 Sizes the object(s) based on the values entered here\nObject(s) Size\nSize
35591 Scales the object(s) based on a percentage of the current size; 200% doubles it, 50% halves it\nScale Factor\nScale
35592 Scales the object(s) based on a percentage of the current size; 200% doubles it, 50% halves it\nScale Factor\nScale
35593 Sets the object's center of rotation based on the ruler coordinates entered here\nCenter of Rotation Position\nCenter of Rotation
35594 Sets the object's center of rotation based on the ruler coordinates entered here\nCenter of Rotation Position\nCenter of Rotation
35595 Sets the angle of rotation. Positive values rotate counterclockwise, negative values rotate clockwise.\nAngle of Rotation\nAngle
35596 Sets the angle of rotation. Positive values rotate counterclockwise, negative values rotate clockwise.\nAngle of Rotation\nAngle
35597 Sets the skew angles relative to the current state of the object; negative values skew counterclockwise; positive values skew clockwise\nSkew Angle\nSkew
35598 Sets the skew angles relative to the current state of the object; negative values skew counterclockwise; positive values skew clockwise\nSkew Angle\nSkew
35599 Locks the anchor point at this location before and after the object is transformed\nAnchor Point
35636 Sets the corner roundness of rectangles and squares; the higher the setting, the more roundness appears on the corners\nRectangle Corner Roundness
35637 Sets the angles for the start and end of an arc or pie\nStarting and Ending Angles\nAngles
35638 Sets the angles for the start and end of an arc or pie\nStarting and Ending Angles\nAngles
35639 Sets the number of points for drawing polygons, stars and polygons as stars\nNumber of Points on Polygon\nPoints
35640 Sets the number of points for drawing polygons, stars and polygons as stars\nNumber of Points on Polygon\nPoints
35641 Specifies the sharpness of stars and polygons as stars; sharpness for stars may be set before or after the star is drawn, sharpness for polygons must be set before drawing\nSharpness of Polygon
35642 Lists the available units for the decimal and fractional styles\nDimension Style
35643 Lists the available units for the decimal and fractional styles\nDimension Style
35644 Lists the available decimal places\nDimension Precision
35645 Lists the available decimal places\nDimension Precision
35646 Lists available styles for the dimension text\nDimension Units
35647 Lists available styles for the dimension text\nDimension Units
35648 Attaches a prefix to the dimension text\nPrefix for Dimension
35649 Attaches a prefix to the dimension text\nPrefix for Dimension
35650 Attaches a suffix to the dimension text\nSuffix for Dimension
35651 Attaches a suffix to the dimension text\nSuffix for Dimension
35652 Click to drop down a small dialog that let you change text position\nText Position Drop Down\nText Position
35653 Sets the spacing between lines of text in points or percentages of character height or point size.\nLine Spacing
35654 Sets the spacing between lines of text in points or percentages of character height or point size.\nLine Spacing
35655 Sets the spacing before and after paragraphs in percentages of character height; uses the same measurement type set for Line spacing.\nSpace Before and After Paragraph
35656 Sets the spacing before and after paragraphs in percentages of character height; uses the same measurement type set for Line spacing.\nSpace Before and After Paragraph
35657 Sets the spacing between text characters as a percentage of the SPACE character in the selected font.\nCharacter Spacing
35658 Sets the spacing between text characters as a percentage of the SPACE character in the selected font.\nCharacter Spacing
35659 Sets the spacing between words as a percentage of the SPACE character in the selected font.\nWord Spacing
35660 Sets the spacing between words as a percentage of the SPACE character in the selected font.\nWord Spacing
35661 Type the horizontal shift as a percentage of point size.\nHorizontal Shift
35662 Type the horizontal shift as a percentage of point size.\nHorizontal Shift
35663 Type the vertical shift as a percentage of point size.\nVertical Shift
35664 Type the vertical shift as a percentage of point size.\nVertical Shift
35665 Sets the angle of rotation. Positive values rotate counterclockwise, negative values rotate clockwise.\nAngle of Rotation
35666 Sets the angle of rotation. Positive values rotate counterclockwise, negative values rotate clockwise.\nAngle of Rotation
35667 Sets the paper type/size\nPaper Type/Size\nPaper
35668 Sets the paper type/size\nPaper Type/Size\nPaper
35669 Sets the paper width and height\nPaper Width and Height\nSize
35670 Sets the paper width and height\nPaper Width and Height\nSize
35671 Sets the name of the selected Form Object\nForm Object name
35672 Sets the name of the selected Form Object\nForm Object name
35673 Sets the default value for the selected Form Object\nForm Object Default Value
35674 Sets the default value for the selected Form Object\nForm Object Default Value
35681 Sets the number of intermediate shapes or the offset between intermediate shapes in the blend\nNumber of Steps or Offset Between Blend Shapes\nSteps
35682 Sets the number of intermediate shapes or the offset between intermediate shapes in the blend.\nNumber of Steps or Offset Between Blend Shapes\nSteps
35683 Rotates the intermediate blend objects counterclockwise; negative values reverse the direction of the rotation\nBlend Direction\nDirection
35684 Rotates the intermediate blend objects counterclockwise; negative values reverse the direction of the rotation\nBlend Direction\nDirection
35685 Modifies the distribution for the blend intermediate shapes on a path\nBlend Object Acceleration\nObject Acc
35686 Modifies the color distribution for the blend intermediate shapes on a path\nBlend Color Acceleration\nColor Acc
35687 Presents controls for modifying miscellaneous blend options\nMiscellaneous Blend Options\nOptions
35690 Presents a list of extrusion types\nExtrusion Type\nType
35691 Presents a list of extrusion types\nExtrusion Type\nType
35692 Sets the properties of the vanishing point\nVanishing Point Properties\nVP
35693 Sets the properties of the vanishing point.\nVanishing Point Properties\nVP
35694 Specifies how far a perspective extrusion recedes from, or approaches the vanishing point; values between 1 and 99 can be entered\nDepth
35695 Specifies how far a perspective extrusion recedes from, or approaches, the vanishing point; values between 1 and 99 can be entered\nDepth
35696 Sets the solid or beginning shade color for the extrusion\nSolid/Shade From Extrude Color\nColor
35697 Sets color to shade the extrude to\nShade To Extrude Color\nColor
35698 Specifies the coordinates for the current object's vanishing point\nVanishing Point Coordinate\nVP Coordinate
35699 Specifies the coordinates for the current object's vanishing point\nVanishing Point Coordinate\nVP Coordinate
35700 Display the position of the vanishing point relative to the 0,0 point on the rulers.\nPosition Vanishing Point relative to Page Origin\nVP Page
35701 Display the position of the vanishing point relative to the center of the selected object.\nPosition Vanishing Point relative to Object Center\nVP Object
35703 Specify the number of shapes you want created and/or the distance you want between the intermediate shapes.\nSteps and Offset
35704 Specify the number of shapes you want created and/or the distance you want between the intermediate shapes.\nSteps and Offset
35705 Specify the number of shapes you want created.\nContour Steps
35706 Specify the number of shapes you want created.\nContour Steps
35707 Specify the distance you want between the intermediate shapes.\nContour Offset
35708 Specify the distance you want between the intermediate shapes.\nContour Offset
35709 Specify the fill color to which the original object's fill color will fade once you apply a contour to it.\nFill Color
35710 Click to choose the end color of the fountain fill to be applied to the last contour object. In the palette, click More to access the Select Color dialog box.\nEnd Fountain Fill Color
35711 Specify the outline color to which the original object's outline color will fade once you apply a contour to it.\nOutline Color
35715 Determines the orientation of the letters on the path.\nText Orientation
35716 Determines the orientation of the letters on the path.\nText Orientation
35717 Determines the vertical placement of text with respect to the path.\nVertical Placement
35718 Determines the vertical placement of text with respect to the path.\nVertical Placement
35719 For text on a curve, determines the side you want to fit the object. For text on an object, determines the horizontal placement of text with respect to the path.\nText Placement
35720 For text on a curve, determines the side you want to fit the object. For text on an object, determines the horizontal placement of text with respect to the path.\nText Placement
35721 Specifies how far above or below the path you want to position the text.\nDistance from Path
35722 Specifies how far above or below the path you want to position the text.\nDistance from Path
35723 Specifies how far along the path you want to position the text.\nHorizontal Offset
35724 Specifies how far along the path you want to position the text.\nHorizontal Offset
35729 Specifies what type of fill to use on the selected object or as a default\nFill Type
35730 Specifies what type of fill to use on the selected object or as a default\nFill Type
35731 Sets which fill of current fill type you want applied, represents first color of a Fountain Fill\nFirst Fill Picker
35732 Sets which fill of current fill type you want applied, represents last color of a Fountain Fill\nLast Fill Picker
35733 Specifies what type of uniform fill to use on the selected object or as a default\nUniform Fill Type
35734 Specifies what type of uniform fill to use on the selected object or as a default\nUniform Fill Type
35735 Specifies what the palette of a uniform fill to use\nUniform Fill Palette
35736 Specifies what the palette of a uniform fill to use\nUniform Fill Palette
35737 Specifies what color of a palette to use as a Uniform Fill\nUniform Fill Palette Color
35738 Specifies what color of a palette to use as a Uniform Fill\nUniform Fill Palette Color
35739 Specifies the tint of a PANTONE MATCHING SYSTEM« or PANTONE« HEXACHROME (TM) palette color\nPantone Color Tint
35740 Specifies the first component of a color\nFirst Color Component
35741 Specifies the first component of a color\nFirst Color Component
35742 Specifies the second component of a color\nSecond Color Component
35743 Specifies the second component of a color\nSecond Color Component
35744 Specifies the third component of a color\nThird Color Component
35745 Specifies the third component of a color\nThird Color Component
35746 Specifies the fourth component of a color\nFourth Color Component
35747 Specifies the fourth component of a color\nFourth Color Component
35748 Specifies the angle and the Edge Pad of a Fountain Fill\nFountain Fill Angle and Edge Pad
35749 Specifies the angle and the Edge Pad of a Fountain Fill\nFountain Fill Angle and Edge Pad
35750 Specifies the number of step in Fountain Fill\nFountain Step
35751 Specifies the number of step in Fountain Fill\nFountain Step
35752 Specifies the MidPoint of a Fountain Fill\nFountain Fill MidPoint
35753 Edits the position of the selected intermediate node of a custom fountain fill\nCustom Fountain Fill Node Position
35754 Edits the position of the selected intermediate node of a custom fountain Fill\nCustom Fountain Fill Node Position
35755 Modifies the color of a selected fountain fill node\nFountain Fill Node Color
35756 Opens a flyout from which you can choose the front color of your 2 Colors Pattern Fill.\nFront Color
35757 Opens a flyout from which you can choose the back color of your 2 Colors Pattern Fill.\nBack Color
35758 Edit tile size\nEdit Tiling of Pattern
35759 Edit tile size\nEdit Tiling of Pattern
35760 Lets you select Texture Library fill to use on the selected object or as a default\nTexture Library
35761 Lets you select Texture Library fill to use on the selected object or as a default\nTexture Library
35762 Specifies which PostScript Texture of a uniform fill to use\nPostScript Fill Textures
35763 Specifies which PostScript Texture of a uniform fill to use\nPostScript Fill Textures
35764 Specifies the transparency type.\nTransparency Type
35765 Specifies the transparency type\nTransparency Type
35766 Uses the slider or entered value to specify the ending level of the transparency\nEnding Transparency
35767 Uses the slider or entered value to specify the starting level of transparency\nStarting Transparency
35768 Uses the slider or entered value to specify the transparency level at the selected point\nTransparency Midpoint
35769 Sets which transparency of current transparency type you want applied, represents first grayscale of a Transparency Fill\nFirst Transparency Picker
35770 Sets which transparency operation you want applied\nTransparency Operation
35771 Sets which transparency operation you want applied\nTransparency Operation
35772 Specifies the angle and the Edge Pad Of a Fountain Transparency\nFountain Transparency Angle and Edge Pad
35773 Specifies the angle and the Edge Pad Of a Fountain Transparency\nFountain Transparency Angle and Edge Pad
35774 Sets the texture style or sample library to use when creating a texture transparency\nTexture Library
35775 Sets the texture style or sample library to use when creating a texture transparency\nTexture Library
35776 Provides a list of arrowheads and symbols that can be applied to the beginning of the selected line\nStart Arrowhead Selector
35777 Provides a list of arrowheads and symbols that can be applied to the end of the selected line\nEnd Arrowhead Selector
35778 Provides a list of dotted and dashed outline styles that can be applied to the selected object\nOutline Style Selector
35779 Provides a palette of colors that can be applied to the outline of the selected object\nOutline Color
35780 Provides a list of preset outline widths that can be applied to the selected object; a custom value can be entered\nOutline Width
35781 Provides a list of preset outline widths that can be applied to the selected object; a custom value can be entered\nOutline Width
35782 Sets the amount of space you want between the frame and the text on the top and bottom\nText Wrap Offset
35783 Push and Pull Distortion Amplitude.\nPush and Pull Distortion Amplitude
35862 Change the color of the selected light\nLight Color\nColor
35863 Camera Rotation\nCamera Rotation\nRotation
35864 Walk Interactive\nWalk Interactive\nWalk
35865 Walk Level\nWalk Level\nLevel
35866 Walk Level\nWalk Level\nLevel
35871 Changes the angle of rotation about the z-axis\nZ-Axis Rotation
35872 Changes the angle of rotation about the z-axis\nZ-Axis Rotation
35873 Changes the angle of rotation about the x-axis\nX-Axis Rotation
35874 Changes the angle of rotation about the x-axis\nX-Axis Rotation
35875 Changes the angle of rotation about the y-axis\nY-Axis Rotation
35876 Changes the angle of rotation about the y-axis\nY-Axis Rotation
35877 Changes the depth of extrusion of the 3D text\nDepth of Extrusion\nDepth
35878 Changes the depth of extrusion of the 3D text\nDepth of Extrusion\nDepth
35879 Changes the shape of the front bevel\nFront Bevel
35881 Changes the shape of the back bevel\nBack Bevel
35883 Changes the width of the bevels\nBevel Width
35884 Changes the width of the bevels\nBevel Width
35885 Changes the height of the bevels\nBevel Height
35886 Changes the height of the bevels\nBevel Height
35888 Applies texture fill to objects\nTexture Fill
35970 Mirrors the object horizontally or vertically.\nMirror Buttons\nMirror
35972 Allow different values in the first and second number boxes. Disable in order to maintain the object's proportion\nNonproportional Sizing\nNonproportional
35973 Keeps the original object, and makes changes according to the specified options to a duplicate object\nApply to Duplicate
35974 Moves the object a specified distance when enabled, otherwise moves the object to the the co-ordinates specified\nRelative to Object
36017 When checked, the selected rectangle roundness is stretched with the object\nScale Roundness With Rectangle
36018 Sets the Ellipse tool to draw full ellipses and circles by default\nEllipse
36019 Sets the Ellipse tool to draw pie wedges by default\nPie
36020 Sets the Ellipse tool to draw arcs by default\nArc
36021 Determines the direction that pies and arcs are drawn; the beginning and ending points are determined by the Starting and Ending angles boxes\nClockwise/Counterclockwise Arcs or Pies\nDirection
36022 Toggles the Polygon tool between drawing polygons and drawing stars.\nPolygon/Star
36023 Displays the units beside the dimension text\nShow Units for Dimension\nShow Units
36024 Turns on/off Dynamic Dimensioning (toggle); updates the dimension value if stretched or scaled\nDynamic Dimensioning
36025 When down, connector is locked to connector node, otherwise it always connects to the closest node\nLock To Connector Node\nLock
36026 Sets which default text style to edit with toolbar when there is no object selected\nDefault Style to Edit
36028 Sets the paper orientation to portrait\nPortrait
36029 Sets the paper orientation to landscape\nLandscape
36065 Sets the blend to be based on a certain number of steps or fixed spacing\nUse Steps or Fixed Spacing for Blend\nFixed
36066 Sets the blend to be based on a certain offset between intermediate shapes\nUse Offset for Blend\nOffset
36067 Rotates a blend's intermediate objects around a point halfway between the start and end objects' centers of rotation\nLoop Blend\nLoop
36068 Creates a blend with colors interpolated in a straight line direction\nDirect Blend\nDirect
36069 Creates a blend with colors interpolated in a clockwise direction\nClockwise Blend\nClockwise
36070 Creates a blend with colors interpolated in a counterclockwise direction\nCounterclockwise Blend\nCounterclockwise
36071 Toggles whether object acceleration should also have impact on the object's size\nAccelerate Sizing for Blend\nAcc Sizing
36072 Toggles whether object acceleration and color acceleration should be linked\nLink Blend Accelerations\nLink Acc
36073 Brings up the Blend Roll-Up with the Acceleration tab selected\nAcceleration Tab in Blend Roll-Up\nAcc Tab
36075 Click to set extrude's color to be of same color used by extruded object\nUse Object Fill\nObject Fill
36076 Click to set extrude's color to be a solid color\nUse Solid Color\nSolid
36077 Click to set extrude's color to be a color shading\nUse Color Shading\nShading
36078 Click to set extrude's orientation\nExtrude Rotation\nRotation
36079 Click to display extrude's Lighting properties\nExtrude Lighting\nLighting
36081 Click to display extrude's Color properties\nExtrude Color\nColor
36082 Click to enable Draped Fills\nDraped Fills
36083 Click to use extrude's fill for bevel, deselect to specify bevel color\nUse Extrude Fill for Bevel\nExtrude Fill
36084 Click to set Bevel fill color\nBevel Color\nColor
36085 Click to set extrude's Bevel\nBevel Preview\nPreview
36086 Specifies the depth of extrude's bevel\nBevel Depth\nDepth
36088 Specifies the angle of extrude's bevel\nBevel Angle\nAngle
36090 Click to apply beveled surfaces to extrude\nUse Bevel\nBevel
36091 Click to display beveled surfaces only - no extruded surfaces\nBevel Only
36092 Click to set extruded lighting\nExtrude Lighting\nLighting
36093 Click to turn on Light #1\nEnable Light #1\nLight 1
36094 Click to turn on Light #2\nEnable Light #2\nLight 2
36095 Click to turn on Light #3\nEnable Light #3\nLight 3
36096 Click to enable full color range shading for lighting effects\nUse Full Color Range\nFull Color
36097 Click to reset the rotation applied to the extrude\nReset Rotation\nReset
36101 Creates proportionate shapes inside the object that get progressively smaller until they reach its center.\nTo Center
36102 Creates proportionate shapes inside the object that get progressively smaller as they approach its center.\nInside
36103 Creates proportionate shapes outside the object that get progressively larger as they move away from it.\nOutside
36104 Creates a contour with colors interpolated in a straight line direction.\nLinear Contour Colors\nLinear
36105 Creates a contour with colors interpolated in a clockwise direction.\nClockwise Contour Colors\nClockwise
36106 Creates a contour with colors interpolated in a counterclockwise direction.\nCounterclockwise Contour Colors\nCounterclockwise
36108 Flips the text to the opposite side of the path and reverses the path's start and end nodes.\nPlace on Other Side
36113 Brings up a dialog to edit the selected object's or the default style's fill\nEdit Fill
36114 Applies a linear fountain fill; shows a progression of colors in a straight line\nLinear Fountain Fill\nLinear
36115 Applies a radial fountain fill; shows a progression of colors in a circular path that radiates from the center of the object\nRadial Fountain Fill\nRadial
36116 Applies a conical fountain fill; shows a progression of colors that radiates from the center of the object outwards\nConical Fountain Fill\nConical
36117 Applies a linear fountain fill; shows a progression of colors in square shapes that radiate from the center of the object outwards\nSquare Fountain Fill\nSquare
36118 Specifies whether to use application preference's number of step in Fountain Fill or not\nFountain Step Lock/Unlock
36119 Uses small tiling\nSmall Tile for Pattern
36120 Uses medium tiling\nMedium Tile for Pattern
36121 Uses large tiling\nLarge Tile for Pattern
36122 Stretches the pattern with the object if enabled\nTransform Fill With Object\nTransform Fill
36123 Creates a pattern from a user-defined area and applies it to the selected object\nSelect Pattern
36124 Applies a two-color bitmap pattern fill to the selection\nTwo-color Bitmap Pattern Fill\nTwo-Color
36125 Applies a full-color pattern fill to the selection\nFull-color Pattern fill\nFull Color
36126 Applies a bitmap pattern fill to the selection\nBitmap pattern Fill\nBitmap
36127 Regenerates the texture fill to use on the selected object or as a default\nRegenerate Texture\nnRegenerate
36128 Brings up a dialog that lets the user change texture's options\nTexture Options Dialog\Options
36129 Edits uniform, fountain, pattern or texture transparency; colors are shown in dialogs, but grayscale values are generated\nEdit Transparency
36130 Applies a linear fountain transparency to the selection\nLinear Fountain Transparency\nLinear
36131 Applies a radial fountain transparency to the selection\nRadial Fountain Transparency\nRadial
36132 Applies a conical fountain transparency to the selection\nConical Fountain Transparency\nConical
36133 Applies a square fountain transparency to the selection\nSquare Fountain Transparency\nSquare
36134 Applies a two-color bitmap pattern transparency to the selection\nTwo-color bitmap pattern transparency\nTwo-Color
36135 Applies a full-color pattern transparency to the selection\nFull-color pattern transparency\nFull Color
36136 Applies a bitmap pattern transparency to the selection\nBitmap pattern transparency\nBitmap
36137 Captures image under lens\nFreeze
36138 Removes transparency from the object\nRemove Transparency
36139 If enabled, draws the outline behind the fill of the object\nOutline Behind Fill
36140 If enabled, scales the outline with the object when the object is scaled\nScale Outline with Object
36141 Applies a Push and Pull Distortion to an object.\nPush and Pull Distortion\nPush && Pull
36142 Applies a Zipper Distortion to an object.\nZipper Distortion\nZipper
36143 Applies a Twister Distortion to an object.\nTwister Distortion\nTwister
36144 Adds a New Distortion.\nAdd New Distortion\nAdd New
36149 Adds New Envelope.\nAdd New Envelope\nAdd New
36150 Chooses Mesh Size.\nMesh Size
36151 Selects a Preset Envelope to Apply.\nSelect and Apply Preset\nPresets
36152 Mapping Mode for the Envelope.\nMapping Mode\nMode
36154 Clears the Envelope.\nClear Envelope\nClear
36155 Applies a random distortion to an object.\nRandom Distortion\nRandom
36156 Applies a smooth Distortion.\nSmooth Distortion\nSmooth
36157 Localizes the distortion to a portion of the object.\nLocal Distortion\nLocal
36158 Positions distortion on the center of the object.\nCenter Distortion\nCenter
36159 Specifies direction of twister to be Clockwise.\nClockwise Rotation\nClockwise
36160 Specifies direction of twister to be Counter-Clockwise.\nCounterclockwise Rotation\nCounterclockwise
36161 Changes the offset of the drop shadow\nDrop Shadow Offset\nOffset
36162 Changes the offset of the drop shadow\nDrop Shadow Offset\nOffset
36163 Changes the feathering of the drop shadow\nDrop Shadow Feathering\nFeathering
36164 Changes the feathering of the drop shadow\nDrop Shadow Feathering\nFeathering
36165 Changes the opacity of the drop shadow\nDrop Shadow Opacity\nOpacity
36166 Changes the opacity of the drop shadow\nDrop Shadow Opacity\nOpacity
36167 Changes the feathering direction of the drop shadow\nDrop Shadow Direction\nDirection
36168 Changes the feathering direction of the drop shadow\nDrop Shadow Direction\nDirection
36169 Changes the edge style of the drop shadow\nDrop Shadow Edges\nEdges
36170 Changes the edge style of the drop shadow\nDrop Shadow Edges\nEdges
36171 Changes the color of the drop shadow\nDrop Shadow Color\nColor
36172 Maintains a one to one ratio between the axis\nNonproportional Offset\nNonproportional
36177 When checked, the parts of the cut object are combined\nLeave As One Object\nLeave One
36178 When checked, the parts of the cut object are closed\nAuto-Close On Cut\nAuto-Close
36179 When checked, the number of nodes in the erased area of the object are reduced\nAuto-Reduce On Erase\nAuto-Reduce
36180 Draws the wireframe of a complex object when it is moved or transformed\nDraw Complex Objects When Moving or Transforming\nDraw Objects
36181 Sets the default behavior of the Pick tool to treat all objects as filled; unfilled objects can be selected by clicking inside the object\nTreat As Filled
36182 Sets default Spiral Type of Spiral Tool to Symmetrical\nSymmetrical Spiral\nSymmetrical
36183 Sets default Spiral Type of Spiral Tool to Logarithmic\nLogarithmic Spiral\nLogarithmic
36184 Closes all open subpaths\nAuto-Close Curve\nAuto-Close
36185 Curves drawn using Natural Pen will be of a fixed width\nFixed Width Natural Pen Type\nFixed Width
36186 Uses pressure to draw using Natural Pen\nPressure Natural Pen Type\nPressure
36187 Uses calligraphic style to draw using Natural Pen\nCalligraphic Natural Pen Type\nCalligraphic
36188 Uses preset to draw using Natural Pen\nPreset Natural Pen Type\nType
36190 Uses the object shape to define the hotspot\nUse Object Shape to Define Hotspot\nShape
36191 Uses the object's bounding box to define the hotspot\nUse Bounding Box to Define Hotspot\nBounds
36192 Displays the image map of the drawing; highlights all URL-tagged objects\nShow Internet Objects\nShow
36248 Adds or removes ambient light\nAmbient Light
53296 &Time and Date
53297 &None
53298 &Memory
53299 &State Icons
53300 &Keyboard States
53301 &Large Color Swatch
53302 Sm&all Color Swatches
53303 Object &Information
53304 Object &Details
53305 Small Color S&watches
53350 Opens the Customize dialog with the Toolbars tab selected; provides the ability to customize toolbar buttons\nCustomize Toolbars
53351 Opens the Customize dialog with the Menu tab selected; provides the ability to customize menu commands\nCustomize Menus
53352 Opens the Customize dialog with the Keyboard tab selected; provides the ability to customize keyboard accelerators\nCustomize Keyboard
53354 Opens the Customize dialog with the Roll-Ups tab selected; provides the ability to customize the placement and grouping of Roll-Ups\nCustomize Roll-Ups
53355 Opens the Customize dialog with the Color Palette tab selected; provides the ability to customize the look/behavior of the Color Palette\nCustomize Color Palette
53501 Changes the spacing of text to have 1 line spacing\n1 Line Spacing
53502 Changes the spacing of text to have 1.5 line spacing\n1.5 Line Spacing
53503 Changes the spacing of text to have 2 line spacing\n2 Line Spacing
53504 Changes all text characters to capital letters\nAll Capitals
53505 Changes the style of text to subscript\nSubscript
53506 Changes the style of text to superscript\nSuperscript
53507 Sets/resets the DropCap for the text object (toggle)\nShow/Hide DropCap
53508 Increases the text indent\nIncrease Indent
53509 Decreases the text indent\nDecrease Indent
53510 Changes the alignment of text to force last line full alignment\nForce Full Alignment
53511 Changes the alignment of text to have no alignment\nNo Alignment
53512 Changes the alignment of text to center alignment\nCenter Alignment
53513 Changes the alignment of text to left alignment\nLeft Alignment
53514 Changes the alignment of text to right alignment\nRight Alignment
53515 Changes the alignment of text to full alignment\nFull Alignment
53516 Changes the style of text to underline\nUnderline
53517 Changes the style of text to bold\nBold
53518 Changes the style of text to italic\nItalic
53519 Sets/resets the bullet for the text object (toggle)\nShow/Hide Bullet
53520 Changes the justification of text to Top\nTop VerticalJustify
53521 Changes the justification of text to Bottom\nBottom Vertical Justify
53522 Changes the justification of text to Centre\nCenter Vertical Justify
53523 Changes the justification of text to Full\nFull Vertical Justify
53524 Adds or removes columns from a paragraph text frame\nColumns
53525 Formats the font face and weight of Artistic characters and text\nCharacter
53526 Formats the properties of Paragraph text\nParagraph
53528 Toggle Horizontal and Vertical text
54001 Opens the search dialog box, which searchs for help on a specific topic\nHelp Topics
54003 Displays copyright and program information\nAbout
54004 Controls where the contents of one or more document pages will be placed on each sheet of paper\nLayout
54005 Controls prepress settings, including printer's marks\nPrepress Options
54006 Controls color separation settings, if separations are enabled in the prepress options\nSeparations
54007 Controls miscellaneous printing options, such as proofing options and print quality\nMisc Options
