5425 Gretag SPM50, SPM55, SPM60, SPM100 or SPM100-II
5426 X-Rite 918,938,948, or 968
5427 X-Rite Color Digital Swatchbook (DTP22 Spectrophotometer)
5429 Colortron II
5430 ICM files(*.ICM)|*.ICM|All files|*.*|
5888 Color Profile Wizard
5889 Color Profile Wizard
5891 Profile Generation Failed!
5892 Please go to the printer characterization dialog box and pick a name.
5893 Please go to the printer calibration dialog box and pick a name.
5894 Please go to the scanner file dialog box and either pick a name or create a scanner profile.
5895 Please check your Corel COLOR directory.
5896 The device <%s, %s> is already defined in the device list, Do you want to overwrite it?
5897 Color Profile Wizard
5898 Invalid Profile %s
5901 Are you sure you want to remove the profile <%s - %s>?
5902 Are you sure you want to remove the manufacturer %s (All manufacturer models will be deleted)?
5903 Are you sure you want to remove the system color profile %s?
5904 Are you sure you want to label each square of the Test Pattern with a number? (Select No if using scanner method)
5905 A calibrated scanner is needed to perform color measurements automatically; Please go back to scanner calibration and select a scanner.
5906 Cannot copy to file %s. Please check that the drive is not full and that the disk is not write protected.
5907 Generic files are missing from your Color directory. Please reinstall the Color Profile Wizard.
5908 Generating Scanner Profile...
5909 Generating Monitor Profile...
5910 Generating Printer Test Pattern...
5911 Measuring Colors...
5912 Generating Printer Profile...
5913 Generating Printer Circuits...
5914 Generating Scanner Circuit...
5915 Generating System Color Profile...
5916 Do you want to Exit the Color Profile Wizard?
5917 The current path is invalid
5921 When the System Profile is complete, you will return to your application.
5922 When the System Profile is complete, you will return to Windows.
5923 Zoom...
5924 Color Calibration
5925 SystemColorProfile
5926 Write error: please check your temp directory.
5927 You accurately selected the four reference marks
5928 You scanned the entire image, including the four white reference marks and the entire grayscale along the bottom
5929 You selected a reference file corresponding to the scanned target
5930 The values you selected for the monitor characteristics are in a reasonable range
5931 You accurately selected the four reference marks; also make sure that you scanned the entire image, including the four white reference marks
5932 The image has the proper patches for CMYK printer calibration
5933 The image has the proper patches for RGB printer calibration
5934 Your scanner has been properly calibrated, and the four reference marks on the scanner target have been accurately selected
5935 Your measurement file contains valid measurements in XYZ100 format
5936 Your measurement file contains valid measurements in XYZ100 format
5937 The CMYK colorants of your printer may be individually controlled
5938 The System Color Profile %s will be the default for all Corel suite applications
5939 Do you want to stop the Color Profile Generation?
5940 to
5941 Printing...
5942 Initializing color space
5943 Image Orientation...
5944 The selected device <%s,%s> will not be added to the list
5945 Color measurement file was saved successfully as %s
5946 Error loading device profile!
5947 The color measurement data has not been saved! Would you like to save it now?
5948 This action will clear all of your measurement data! \n Are you sure?
5949 Unable to create temporary file for conversion to TDF format!\nCheck your temp directory,
5950 Color System Initialization Error
5951 Low Quality profile
5952 Light profile
5953 Dark profile
5954 Are you sure you want to save the the file %s?
5955 Are you sure you want to clear all measurements?
5956 Are you sure you want to overwrite the file %s?
5957 The measurements have been saved successfully to %s.
5958 Can not create the file %s
5959 The specified location doesn't contain valid profile for your device.
5960 Your current measurements have not been saved, Would you like to reset them?
5961 Please select an RGB bitmap (24 bit)
5968 N/A
5969 The number of patches should be in the range <%s, %s>.
5970 Color Profile Wizard
5971 Please reset your current measurements before updating the pattern.
5972 There is no printer connected by your system.
5973 Error Loading the Monitor information from the windows registery
5974 Calibration requires a 24-bit scanned target.\nPlease rescan the target and ensure that the depth is set to 24-bits.
5975 Verifying Fiduciary Marks...
5976 Device not installed.
5977 No active Separations Printer, Composite selected.
5978 No active Composite Printer, Separation selected.
5979 Your CMYK printer profile has been successfully generated.\nDo you wish to edit the black colorant to control GCR?
5980 Error when trying to control CMYK components.
5982 Bad parameter. Please check the values set in the aimed curve and the TAC.
5983 Bad TAC and Black constraint.
5984 Initializing Lookup Tables
5985 Generating Lookup Tables
5987 Install Profiles...
5989 The specified location '%s' does not contain the ICM profile(s).\nHints: Use the Get Profile From Disk option to select another source.
5990 Unable to locate the ICM profile(s).\nHints: Use the Get Profile From Disk option to select another source.
5991 Are you sure you want to cancel the changes to the device <%s - %s>?
5992 Automatic
5993 Photographic
5994 Illustration
5995 Initialization failed. GCR can not be edited for this profile.
8192 Manufacturer and Model:
8193 Enter the Manufacturer and Model Name:
8194 Finish
8195 Next >
8196
8197 OK
8198 Rotate 90░ Clockwise
8199 Rotate 90░ Counter-Clockwise
8200 Zoom Tool
8448 Name and Description of the selected System Profile
8449 Enter a Name and a Description for the System Profile.
8450 Composite Printer
8451 Separations Printer
8452 Activate Scanner Profile
8453 Activate Monitor Profile
8454 Activate Composite Printer Profile
8455 Activate Separations Printer Profile and Internal CMYK Conversions
8705 Align this point with the top left corner
8706 Align this point with the bottom left corner
8707 Align this point with the top right corner
8708 Align this point with the bottom right corner
8709 The Scanner Profile %s has an Invalid Name
8710 Cannot find the scanner profile %s. Either check the directory %s, regenerate the file %s through the scanner calibration process, or select a different scanner profile.
8711 Cannot find the generic scanner profile %s. Either check the directory %s, select an existing scanner, or reinstall this product.
8712 Cannot find the data reference file %s.
8713 Cannot find the reference file %s
8714 Template TDF file %s is missing or invalid.
8715 The reference file %s is invalid, unable to translate to TDF format.
9216 Measure the CIE XYZ100 values of each palette rectangle from 1 to %d (please refer to the test pattern file you have have just printed), and create a measurement file (%s) in the Color directory (%s).
9217 When ready, click 'Done' and select the new %s file.
9218 No measurement file has been found in the color directory %s.
9219 The measurement file %s does not exist. Please select or generate a measurement file.
9220 Custom
9221 None
9222 Light
9223 Medium
9224 Heavy
9225 Maximum
9226 A measurement file will be automatically generated from the printer target image; this file will be stored in your color directory.
9227 Type the name of the color measurement file. If you don't know the name, click Browse to view available files.
9228 Patches: %d
9231 Number of Color Patterns: %d - %s Printer Calibration Date of Print: %s
9233 (This pattern is for calibration using a colorimeter, do not calibrate by using this pattern with a scanner.)
9234 Current Printer: %s
9235 The printout has the %s color profile applied to it. Would you like to tune the profile to be more accurate?
9236 There are no printers installed. You must install a printer if you wish to use it to tune a profile.
9237 There are no printers installed. You must install a printer before you may test a printer profile.
9473 The specified location does not contain calibration information
9474 Note: the following list shows the %s information files already defined in the Color directory. You can either add %s to an existing file or create a new file.
9475 Monitor
9476 Scanner
9477 Printer
9478 This directory does not contain the required device profiles
9480 Select information file path
9729 %s is not a valid Color Profile Wizard system file.
9730 %s is an incorrect version.
9777 File name is bad: check name, directory and extension of file.
9778 The manufacturer does not match the profile.
9779 Cannot open file %s.
9780 Cannot write to file %s.
9781 Not Enough Memory, Please close some applications and try again.
9782 Bad file format or values in %s.
9783 General error.
9784 Incorrect file format or Bad values in %s.
9785 Cannot find device in the profile %s.
9786 The selected profile file is defined for another type of device.
9787 Cannot delete the file <%s>, Please check the file existance and attributes.
9788 Unable to update %s, file is read only.
9789 Not enough disk space, or scanning error.
9790 The device %s-%s is already defined in %s; Do you want to replace the existing device profile with the new one?
12288 %s separation
12289 Page %d
12290 Default
12291 Printer paper orientation does not match document.\n\nAdjust printer automatically?
12292 Unable to create printing resource lists.
12293 Unable to write %s.
12294 Unable to allocate memory.
12295 No printers have been installed.
12296 %d %% Complete
12297 Composite
12298 Tile %d of %d
12299 Band %d
12300 Disabled
12301 Analyzing Document...
12302 Even & Odd
12303 Even Pages
12304 Odd Pages
12305 %d spot color separations are about to be output. Are you sure you want to continue?
12306 Spot Color Separations Warning:
12307 If any spot colors are used
12308 If more than 1 spot colors used
12309 If more than 2 spot colors used
12310 If more than 3 spot colors used
12312 Left & Right
12313 Left Pages
12314 Right Pages
12315 &Maximum:
12316 Wi&dth:
12317 No printers have been installed. Do you like to add one?
12320 There is an object with a very complex outline.
12321
12322 Outlines with more than 500 nodes may cause limitcheck errors
12323 on Level 1 PostScript devices. It would be best to redesign
12324 such objects so that fewer nodes are necessary.
12325
12326
12327
12328
12329
12330 Locate external bitmap
12331 Transparency in the document is complex and computation could be lengthy.\nSubstitute a faster but less accurate approach (recommended)?
12332 COMPLEX TRANSPARENCY
12336 There is an object with a complex fill and a complex outline.
12337
12338
12339 Objects with more than 300 nodes that contain complex
12340 fills may cause limitcheck errors on Level 1 PostScript
12341 devices. It would be best to redesign such objects so
12342 that fewer nodes are necessary.
12343
12344
12345
12352 There is a clipping path (e.g., a Lens or PowerClip) that
12353 contains many nodes.
12354
12355 Complex clipping paths may cause limitcheck errors on
12356 Level 1 PostScript devices. It would be best to redesign
12357 such clipping paths so that they use as few nodes and
12358 subpaths as possible.
12359
12360
12361
12368 There is an object with multiple subpaths that contains a
12369 texture fill.
12370
12371 Objects comprised of multiple subpaths that contain
12372 texture fills may cause limitcheck errors on Level 1
12373 PostScript devices. These objects should be redesigned so
12374 that only one curve, with no subpaths, exists.
12375
12376
12377
12384 There is a clipping path (e.g., a Lens or PowerClip), with
12385 multiple subpaths, that contains a bitmap.
12386
12387 Bitmaps inside complex clipping paths may cause limitcheck
12388 errors on Level 1 PostScript devices. These objects should
12389 be redesigned so that only one curve, with no subpaths,
12390 exists.
12391
12392
12393
12400 There is a text object that contains a texture fill.
12401
12402 Text objects that contain texture fills may cause
12403 limitcheck errors on Level 1 PostScript devices. This is
12404 because multiple subpaths are usually necessary in order to
12405 render text objects.
12406
12407
12408
12409
12416 There is a linear fountain fill that will likely show
12417 banding on output.
12418
12419 The following actions can eliminate banding:
12420
12421 ╖ reduce the length of the fountain fill
12422 ╖ increase the number of fountain steps
12423 ╖ increase the range of color in the fill
12424 ╖ output to a higher resolution
12425 ╖ output using a lower screen frequency
12432 Layout
12433 Separations
12434 Options
12435 Special
12440 Cyan
12441 Magenta
12442 Yellow
12443 Black
12444 Color
12445 Frequency
12446 Angle
12447 Overprint
12449 Standard Defaults
12450 No PostScript screen sets found in CORELPRN.INI!
12451 Unable to locate the file %s in the data directory \nor the custom directory!\n
12452 Default
12453 Dot
12454 Line
12455 No colors were chosen for separation!
12456 Number of fountain steps must be between 0 and %d inclusive!
12462 Some values are invalid. Make sure that values are\npositive and that angles do not exceed 360 degrees
12463 The value entered for the angle is invalid.\nMake sure it is between -360 and 360 degrees.\n
12464 The value entered for the frequency is invalid,\nMake sure it is a positive number.\n
12465 Print Job Info Sheet to Text File
12467 Text File (*.txt)|*.txt|All Files (*.*)|*.*||
12468 Print Job Info Sheet
12470 Print Job Info File (*.pji)|*.pji|All Files (*.*)|*.*||
12473 High
12474 Medium
12475 Low
12476 Draft
12477 The character '%c' cannot be used in the range of page numbers to be printed.
12478 You must specify at least one valid page number to be printed.\nCheck your page range and even/odd pages setting.
12485 %s%5.1f x %5.1f Millimeters
12486 %ld dpi
12487 %ld dpi x %ld dpi
12488 (%s)
12489 %s%ld dpi
12490 %s%3.4f Inches
12491 %s%3.4f x %3.4f Inches
12492 %s%3.3f Points
12493 %3.3f Points
12561 Print Job Information:
12562 Application Information
12563 Filename:
12564 Application:
12565 Version:
12567 Device Name:
12568 Driver Information
12569 Driver Name:
12570 Driver File:
12571 Resolution:
12572 Job Information
12573 Mode:
12574 Invert:
12575 Mirror:
12576 AutoFlatness:
12577 AutoSpreading:
12578 Fountain Steps:
12579 For Macintosh:
12580 Color Profile:
12581 Screen Frequency:
12582 Bleed Limit:
12583 Crop Marks:
12584 Registration Marks:
12585 File Information:
12586 Densitometer Scale:
12587 Calibration Bar:
12588 Copies:
12589 Separation Information
12590 %s:
12593 Flatness:
12594 Maximum Spread:
12595 Text Above:
12596 Font(s)
12597 Font(s) Required
12598 Font(s) Supplied
12599 OPI Linked Images
12600 None
12601 Yes
12602 No
12603 Enabled
12604 Disabled
12605 Separations
12606 No
12607 Yes
12608 No
12609 Yes
12610 See Separation Information
12611 degrees
12612 lpi
12613 UNKNOWN
12614 Landscape
12615 Portrait
12616 N/A
12617 Do not know where to output the sheet.\n Go into Info Settings and specify a destination\n
12618 Printer Default
12619 PostScript Level:
12620 Bitmap Color Space:
12621 Auto Increase Fountain Steps:
12622 Optimize Fountain fills:
12623 Current Selection:
12624 Bitmap Printing:
12625 Output Entire Bitmap
12626 Output in 64K Chunks
12627 Preview Image Default:
12628 Off At Startup
12629 On At Startup
12630 Bitmap Font Limit (PS):
12631 Bitmap Font Size Threshold (PS):
12632 Overprint Black Threshold (PS):
12633 Fill Clipping:
12634 Use Driver Clipping For Fills
12635 Use Software Clipping For Fills
12636 Grayscale Driver Bitmap Output (PS):
12637 Send Color Bitmaps As Color
12638 Send Color Bitmaps As Grayscale
12639 PostScript 2 Stroke Adjust (PS):
12640 Off
12641 On
12642 Registration Mark Type:
12643 Standard Bullseye
12644 Half Inverted Bullseye
12645 Square and Circle
12646 Elongated Bullseye
12647 Driver Banding:
12648 Let Driver Handle Banding
12649 Send Bands to Driver
12650 Corel Logo
12651 Print Preview Drag Mode:
12652 Drag Marquee
12653 Drag Full Image
12654 Page Orientation Warning:
12655 Off
12656 On
12657 Composite Crop Marks (PS):
12658 Output in Black Only
12659 Output in CMYK
12660 Text Output Method:
12661 All Text as Graphics
12662 Text as Text When Possible
12663 Conform to DSC (PS):
12664 Off
12665 On
12666 Resolve DCS Links (PS):
12667 Leave DCS Links Unresolved
12668 Substitute Plates at Print Time
12669 Bitmap Chunk Overlap Pixels:
12670 Default To Fast Mode
12671 &Help
12672 Unable to read print styles database; print styles will not be available.
12673 Limit on number of print styles has been reached; unable to add another style.
12674 The print style:\n\n %s\n\nalready exists. Do you wish to update it with new settings?
12675 Unable to save print style. Please ensure that CORELPRN.INI has read/write access.
12676 Cannot remove style:\n\n %s\n\nStyle does not exist.
12677 You are about to delete the print style: %s\n\nDo you wish to proceed?
12678 Unable to remove style:\n\n %s
12679 You must enter a valid name for the style in order to save it.
12681 %s Defaults
12682 Unable to load the specified print style.
12683 Insufficient memory or system resources to carry out this operation.\nClose some applications and try again.
12684 Custom (Current settings not saved)
12717 Print to File:
12718 Fixed Spread:
12774 Job Information Sheet Settings
12775 Advanced Separations Settings
12776 Layout Settings
12777 Separations Settings
12778 Prepress Settings
12779 Miscellaneous Settings
12780 Proofing and Color Settings
12781 PostScript Settings
12782 Fixed Auto Spreading
12783 Auto Trapping Settings
12784 Center Page
12785 Fit to Page
12786 Maintain Aspect Ratio
12787 Print Tiled Pages
12788 Signature Layout
12789 N-up Format
12790 Tile Overlap
12792 Print Separations
12793 Print Separations in Color
12794 Convert Spot Colors to CMYK
12795 Print Empty Plates
12796 Print File Information
12797 Position File Info Within Page
12798 Print Crop Marks
12799 Exterior Crop Marks Only
12800 Print Registration Marks
12801 Color Calibration Bar
12802 Densitometer Scales
12803 Invert
12804 Mirror
12805 Print Job Information Sheet
12806 Always Overprint Black
12807 Auto Spreading
12808 Auto Spread Maximum
12809 Auto Spread Text
12810 Fountain Steps
12811 Width Scale Factor
12812 Height Scale Factor
12813 Job Info Sheet Contents
12814 Job Info Sheet Location
12815 Bleed Amount
12816 Print Vectors
12817 Print Bitmaps
12818 Print Text
12819 Print All Text in Black
12820 All Colors Black
12821 Fit Marks and Layout to Page
12822 Maximum Points per Curve
12823 Curve Flatness
12824 Auto Increase Flatness
12825 Complex Object Warnings
12826 Download Type 1 Fonts
12827 Convert True Type to Type 1
12828 PostScript Level
12829 Auto Increase Fountain Steps
12830 Optimize Fountain Fills
12831 Banded Fountain Fill Warnings
12832 Output Color Bitmaps in RGB
12833 Maintain OPI Links
12834 Print Page Numbers
12835 Screening
12836 Halftone Type
12837 Hexachrome Plates
12838 Apply Settings to All Pages
12839 Screen Frequency
12840 High Solid Ink Density
12841 Densitometer Densities
12842 Job Name / Slug Line
12843 Bounding Box
12844 Use JPEG Compresssion
12845 JPEG Quality Factor
12846 Too Many Spot Colors Warning
12847 Too Many Fonts Warning
12858 You are about to delete the style: %s\n\nDo you wish to proceed?
12864 Full Page
12865 Book
12866 Booklet
12867 Tent-Card
12868 Side-Fold Card
12869 Top-Fold Card
12870 Tri-Fold Card
12871 As in document (%s)
12872 Double Sided Full Page
12879 Error loading %s.
12896 Ready
12897 Paused
12898 Error
12899 Pending Deletion
12900 Paper Jam
12901 Paper Out
12902 Manual Feed
12903 Paper Problem
12904 Offline
12905 I/O Active
12906 Busy
12907 Printing
12908 Output Bin Full
12909 Not Available
12910 Waiting
12911 Processing
12912 Initializing
12913 Warming Up
12914 Toner Low
12915 No Toner
12916 Page Punt
12917 User Intervention Required
12918 Out Of Memory
12919 Door Open
12920 Server Unknown
12921 ;
12922 Default printer
12923 %d documents waiting
12924 1 document waiting
12933 PagePath Section
12934 Refeed this stack with this sheet
12935 in the direction of the arrow.
12936 Use the smaller arrow if your printer feeds the paper along the long edge.
12937 FACE UP
12944 FACE DOWN
12945 The first side of your print job is being printed.\n\nWhen the printer is finished, follow the instructions on top of the stack of printed sheets.\n\nOnce you have done this, click OK to print the second side.
12946 The first side of your print job is being printed.\n\nWhen the printer is finished, refeed the stack for printing on the second side. The stack should be fed %s, with the %s edge that came out of the printer facing into the paper feed.\n\nOnce you have done this, click OK to print the second side.
12947 face up
12948 face down
12949 first
12950 last
12960 RGB
12961 CMYK
12962 Page Numbers:
12963 Client Information
12964 Client Name:
12965 Company Name:
12966 Mailing Address:
12967 Phone Number:
12968 Fax Number:
12969 Email Address:
12970 Job Name:
12971 Job Comments:
12972
12975 Documents to print
12976 C&urrent page
12977 C&urrent slide
12978 C&urrent thumbnail
12979 C&urrent frame
12980 C&urrent handout
12984 Pa&ges:
12985 Sl&ide&s:
12986 Thumbna&ils:
12987 Fr&ames:
12988 H&andouts:
12992 &Apply settings to all pages
12993 &Apply settings to all slides
12994 &Apply settings to all thumbnails
12995 &Apply settings to all frames
12996 &Apply settings to all handouts
13000 &Pages per sheet:
13001 Slides &per sheet:
13002 Thumbnails &per sheet:
13003 Frames &per sheet:
13004 Handouts &per sheet:
13008 Style name cannot be empty.
13009 0░
13010 180░
13011 Front frame
13012 Back frame
13013 Unable to access printer driver.Try removing and reinstalling this printer driver.
13014 The Position style:\n\n %s\n\nalready exists. Do you wish to update it with new settings?
13015 The style:\n\n %s\n\nalready exists. Do you wish to update it with new settings?
13016 Manual Double-Sided Printing
13017 You are printing a double-sided layout on a non-duplexing printer.\n\nChoose Yes to be prompted when to flip the paper to duplex manually.\nChoose No to disable the prompts and print on one side only.\n
13018 The left and top bounding box positions must be smaller than the right and bottom positions
13019 Note that this action will reset any changes you have made to the image positions or the list of separation colors in Print Options or Print Preview.
13020 Note that this action will reset any changes you have made to the list of separation colors in Print Options or Print Preview.
13022 This is the name of a built-in style that cannot be changed.
13131 Plate: %d of %d
13132 Preparing document fonts
13133 Color profile:
13134 %.5g lpi at %.5g degrees
13136 Default screen
13137 Composite
13152 No Error
13153 Unknown Error
13154 Out Of Memory
13155 Invalid Parameters
13156 Could Not Write Output
13157 Could Not Create Command Block
13158 No Output Stream Specified
13159 Could Not Read Input
13160 Invalid Block Type
13161 String Too Large
13162 No Graphics State Available
13163 No Graphics Vector Fill Available
13164 No Text Block Available
13165 No Printing State Available
13166 No Printer Vector Fill Available
13167 Invalid Parameter To Print Routine
13168 No Text Block Available
13169 Cannot Print Outside of Text Block
13264 Page %d
13265 Slide %d
13266 Thumbnail %d
13267 Frame %d
13268 Handout %d
13272 Page Size:
13273 Slide Size:
13274 Thumbnail Size:
13275 Frame Size:
13276 Handout Size:
13280 Page Orientation:
13281 Slide Orientation:
13282 Thumbnail Orientation:
13283 Frame Orientation:
13284 Handout Orientation:
13290 %s%3.4f %s
13291 %s%3.4f x %3.4f %s
13292 %3.4f x %3.4f %s
13293 %3.4f %s
13296 Full Page
13297 Book
13298 Booklet
13299 Tent-Card
13300 Side-Fold Card
13301 Top-Fold Card
13302 Tri-Fold Card
13303 Manual
13304 Clipping factors:
13305 Scale factor:
13307 User Defined
13308 Cannot Open File
13309 Form Already Exists OverWrite?
13312 &Printer Capabilities
13313 Device Mode Information:
13314 Device Name:
13315 Version Number:
13316 Printer Driver Version:
13317 Size:
13318 Driver Extra:
13319 Fields:
13320 Orientation:
13321 Portrait
13322 Landscape
13323 Paper Size:
13324 Paper Length:
13325 Paper Width:
13326 Scale (%):
13327 Copies:
13328 Default Source:
13329 Print Quality:
13330 High
13331 Medium
13332 Low
13333 Draft
13334 Color:
13335 On
13336 Off
13337 Duplex:
13338 Simplex
13339 Horizontal
13340 Vertical
13344 Y Resolution:
13345 TrueType Options:
13346 Prints TT as Graphics
13347 Downloads TT Fonts as Soft Fonts
13348 Substitutes Device Fonts for TT
13349 Collate:
13350 True
13351 False
13352 From Name:
13353 Pixels (per logical inch):
13354 Color Resolution (in bits per pixel):
13355 Width (in pixels):
13356 Height (in pixels):
13357 Device's display mode:
13358 Text mode
13360 Frequency (htz):
13361 ICM Handled:
13362 Disabled:
13363 Windows:
13364 Device Driver:
13365 Destination Device:
13366 Color Matching Methods:
13367 Optimize for Color Saturation:
13368 Optimize for Color Contrast:
13369 Optimize to Match the Exact Color:
13370 Media Type:
13371 Plain Paper:
13372 Glossy Paper:
13373 Transparent Film:
13374 Dither Type:
13375 Non
13376 A Coarse Brush
13377 A Fine Brush
13378 Line Art Dithering
13379 Grayscale
13380 Device Capabilities:
13381 Device Type:
13382 PostScript
13383 Non-PostScript
13384 Device Technology:
13385 Vector Plotter
13386 Raster Display
13387 Raster Printer
13388 Raster Camera
13389 Character Stream
13390 Metafile
13391 Display File
13392 Physical Width (mm):
13393 Physical Height (mm):
13394 Width of the Screen (pixels):
13395 Height of the Screen (raster lines):
13396 Number of Pixels Hor (logical inch):
13397 Number of Pixels Ver (logical inch):
13398 Color Bits (pixel):
13399 Color Planes (pixel):
13400 Device-Specific Brushes:
13401 Device-Specific Pens:
13402 Device-Specific Fonts:
13403 System Colors:
13404 Relative Pixel Width:
13405 Relative Pixel Height:
13406 Relative Pixel Diagonal Width:
13407 Reserved:
13408 Entries in System Palette:
13409 Reserved Entries in System Palette:
13410 Color Resolution:
13411 Physical Width (device units):
13412 Physical Height (device units):
13413 Horizontal Physical Printable Area:
13414 Vertical Physical Printable Area:
13415 Horizontal Scaling Factor:
13416 Vertical Scaling Factor:
13417 Vertical Refresh Rate:
13418 Width of the Virtual Desktop (pixels):
13419 Height of the Virtual Desktop (pixels):
13420 Horizontal Drawing Alignment:
13421 Clipping Capabilities:
13422 Clip Output to Rectangle
13424 Raster Capabilities:
13425 Requires Banding Support
13426 Transfer Bitmaps
13427 Support Bitmaps Larger than 64K
13428 Supports SetDIBits and GetDIBits
13429 Supports SetDIBits To Device
13430 Flood Fills
13431 Support Windows 2.0 Features
13432 Specifies a Palette-Based Device
13433 Capable of Scaling
13434 Supports StretchBlt
13435 Supports StretchDIBits
13436 Curve Capabilities:
13437 Does not Support
13438 Draw Circles
13439 Draw Pie Wedges
13440 Draw Chord Arcs
13441 Draw Ellipses
13442 Draw Wide Borders
13443 Draw Styled Borders
13444 Draw Wide Styled Borders
13445 Draw Interiors
13446 Draw Rounded Rectangles
13447 Line Capabilities:
13448 Not Supported
13449 Draw A Polyline
13450 Draw a Marker
13451 Draw Multiple Markers
13452 Draw Wide Lines
13453 Draw Styled Lines
13454 Draw Wide and Styled Line
13455 Draw Interiors
13456 Polygon Capabilities:
13457 Not Supported
13458 Draw Alternate-fill Polygons
13459 Draw Rectangles
13460 Draw Winding-fill Polygons
13461 Draw Single Scan Line
13462 Draw Wide Borders
13463 Draw Styled Borders
13464 Draw Wide and Styled Borders
13465 Draw Interiors
13466 Text Capabilities:
13467 Capable of Character Output Precision
13468 Capable of Stroke Output Precision
13469 Capable of Stroke Clip Precision
13470 Capable of 90-degree Character Rotation
13472 Capable of Any Character Rotation
13473 Scale in X and Y Direction
13474 Capable of Doubled Character for Scaling
13475 Uses Integer Multiples for Scaling
13476 Uses Multiples for Exact Scaling
13477 Draw Double-Weighted Characters
13478 Italics
13479 Underline
13480 Draw Strikeouts
13481 Draw Raster Fonts
13482 Draw Vector Fonts
13483 Must be Zero
13484 Can not Scroll using Bit-Block Transfer
13485 Yes
13486 No
13488 Saves current print settings in the current print style
13489 Saves current print settings as a new print style
13490 Deletes the current print style
13491 Prints all or part of the document
13492 Immediately prints the current sheet only
13493 Chooses printer to use and/or changes printer properties
13494 Closes print preview, returning to edit mode
13495 Exits the application and prompts to save changes
13496 Overrides preview type to show a composite image of all colors on each sheet
13497 Overrides preview type to show color separations that will be printed for each sheet
13498 Shows only a specific color separation for each sheet
13499 Represents the image to be printed by a gray bounding box
13500 Quickly shows a rough approximation of the image to be printed
13501 Draws a more accurate version of the image to be printed
13502 Overrides preview type to show how sheets would appear if printed in color
13503 Overrides preview type to show how sheets would appear if printed in grayscale
13504 Shows or hides the edge of the printable area for the current printer
13505 Shows or hides boundaries between pages when print tiled pages is on
13506 Shows a fold at the upper right corner of the page
13507 Shows or hides handles that can be used to move or resize the image
13508 Shows or hides the main print preview toolbar
13509 Shows or hides the status bar
13510 Shows or hides the rulers
13511 Shows the current view in full-screen preview mode
13512 Changes the current zoom (magnification) setting
13513 Jumps to a specific location in the document
13514 Resizes or repositions image(s) to be printed
13515 Edits page layout
13516 Edits rows and colums of pages
13517 Changes basic color separation settings
13518 Changes advanced screening parameters
13519 Changes miscellaneous print options
13520 Turns on or off printer's marks and other prepress settings
13521 Changes PostScript-specific settings
13522 Sets up a job information sheet to be printed with the document
13523 Sets up double-sided printing on a single-sided printer
13524 Opens the search dialog box, which searches for help on a specific topic
13525 Invokes context-sensitive help
13526 &Close
13527 Print
13528 Print Options
13529 Close Print Preview
13530 Print Style
13531 Save Print Style As
13532 Delete Print Style
13533 Pick Tool
13534 Zoom Tool
13535 Zoom Factor
13536 Full Screen
13537 Layout
13538 Separations
13539 Help
13540 Previous Sheet
13541 Next Sheet
13542 Mirror
13543 Invert
13544 Densitometer Scales
13545 Color Calibration Bar
13546 Registration Marks
13547 Crop Marks
13548 Page Numbers
13549 File Information
13550 Close
13551 You must specify at least one valid chapter number to be printed.
13552 &Options...
13553 You must specify at least one valid page number to be printed.\nCheck your page range and left/right pages setting.
13554 &Print... Ctrl+P
13555 &Print Ctrl+P
13556 %d%%
13557 To Page
13558 To Width
13559 To Height
13560 To Selected
13561 To Fit
13562 AaBbCcDdEeXxYyZz
13563 (Print Preview)
13564 Page %d
13565 Sheet %d
13566 Front
13567 Back
13568 -
13569 PANTONE
13570 PMS
13571 CV
13572 Seps
13573 Composite
13574 CMYK
13575 Hexachrome
13576 &
13577 Spot
13578 Printer:
13579 Composite
13580 (%s)
13581 Sheet
13582 Side
13583 Plate
13584 Page(s)
13585 %d of %d
13586 ,
13587 No pages are selected for printing.
13588 No plates matching the View|Plate setting are selected for printing.
13589 Color Separations To Print
13590 Currently Selected Printer
13591 PostScript Printer
13592 Color Printer
13593 Grayscale Printer
13594 Width: %s Height: %s Position: (%s, %s)
13595 Scale: %.lf%%
13596 Scale: (%.lf%%, %.lf%%)
13597 Selection:
13598 None
13599 ,
13600 Positive Image / Emulsion Up
13601 Positive Image / Emulsion Down
13602 Negative Image / Emulsion Up
13603 Negative Image / Emulsion Down
13604 %s Densitometer Scale
13605 Toolbar
13606 Prepress Bar
13607 Shows or hides the toolbar with printers marks and prepress settings
13608 Shows or hides the bounding box which printer's marks are aligned to
13612 Automatically sets the preview type to match what will be printed
13613 Displays program information and copyright
13614 Non-PostScript Printer
13615 PostScript Printer - AdobePS Driver
13616 No
13617 Color Separations Are Off
13618 Current Selection
13619 Color Printer - Grayscale Mode
13620 Preview of duotone separations is not supported
13762 The current settings for this document will cause %d fonts to be\ndownloaded to the printer. This could overrun memory and prevent\nthe page(s) from printing.\n\nAre you sure you want to continue?
13763 Not configured
13764 Not configured for composite
13765 Not configured for separations
13766 No color profile has been setup for separations. Use Corel Color Manager to configure a separations profile.
13767 Preview Color Default:
13768 Auto (Simulate Output)
13769 Color
13770 Grayscale
13771 Preview Separations Default:
13772 Auto (Simulate Output)
13773 Composite
13774 Off
13776 Prepare For Service Bureau Wizard
13777 %s is currently gathering linked image files used by your graphic.
13778 %s is currently assembling information about your graphic.
13779 %s is currently creating a %s file.
13780 %s is currently printing your graphic to a .PRN file.
13781 The gathering of files for your service bureau was not completed.
13782 \n\nIf you wish to change any of your previous settings or try again, click Back. Click Cancel if you wish to exit the Prepare For Service Bureau Wizard.
13783 UserName
13784 CompanyName
13785 MailingAddress
13786 PhoneNumber
13787 FaxNumber
13788 EmailAddress
13789 PrepareForServiceBureauWizard
13791 Corel Service Bureau Profiles (*.csp)
13792 Browse Service Bureau Profiles
13793 Choose Location
13795 Folder (*.*)
13798 The location you specified could not be found or created.\n\nClick back to select another location.
13800 (%s)
13802 To change color calibration to use this profile, choose 'Set Profiles' and change the %s profile. When you are finished, click Next to continue.
13803 composite
13804 separations
13806 The gathering of files for your service bureau was not completed. The following files were not created:
13807 \n
13808 \n
13809 %s x %s %s
13810 (%s)
13811 The service bureau has requested the use of color calibration.\n\nYou do not have color management installed with %s. You must exit %s to install the color management component. Please save your work before exiting.\n\nPress cancel to exit this wizard and then run Setup from %s CD #1. Choose the Custom option and select Color Management in the Graphics Utilities section.
13812 The service bureau requests that the following color profile be used as the %s printer profile:
13813 Your document's page size is too large for the current physical page size. The document page size selected in page setup must be small enough to fit within the physical page selected in printer properties, while still leaving a %s %s margin on all sides.\n\nClick Cancel if you wish to return to your document to adjust its page size, or click Back to change the page size in printer properties.
13814 Unable to find the file:\n\n %s\n\nDo you wish to continue gathering files, omitting this file?
13815 The folder where files are being gathered to already contains a file named:\n\n %s\n\nDo you wish to replace this file?
13816 You have cancelled the gathering of files for your service bureau.
13817 Font Name
13818 Filename
13819 Fonts.TXT
13820 Below is a list of the fonts used by %s.\n\nFont Name Path\n----------------------------------------------------------------------------\n
13821 %-25.25s %s\n
13822 ,
13823 Links.TXT
13824 Below is a list of externally linked images used by %s.\n\n
13825 %s\n
13826 Your document's page size is too large for the largest physical page size supported by this service bureau. The document page size selected in page setup must be no larger than %s. \n\nClick Cancel if you wish to return to your document to adjust its page size, or click Back to select a different profile.
13828 The selected service bureau profile is not intended for use with this version of %s. Using this profile may not produce the results requested by the service bureau.\n\nDo you wish to proceed using this profile?
13829 Download profile from Internet...
13830 This service bureau profile was created for %s, and cannot be used with %s.\n\nClick Back to select a different profile, or click Cancel to exit the Prepare For Service Bureau Wizard.
13831 Any
13832 The service bureau has requested that you set the printer page size to %s.
13833 Your document page size set in page setup is %s.
13834 This is the minimum printer page size that may be used to print your graphic.
13835 To allow for any printer's marks outside this area, the minimum printer page size that may be used to print your graphic is %s.
13836 The largest printer page size supported by the service bureau is %s.\n\nIn Printer Properties, choose a printer page size that is within this range.
13837 JobInfo.TXT
13840 Resolve External Bitmaps
13841 Limit Bleed
13842 Image Position Preset
13843 All Colors Grayscale
13844 Print Pictures & Graphics
13845 Print Hidden Pictures
13846 Use Advanced Settings
13847 Screening Settings
13848 Resolution
13849 Basic Screen
13850 Marks Alignment Rectangle
13851 Auto-Position Marks Rectangle
13852 Application Information
13853 Driver Information
13854 Font Information
13855 Links Information
13856 Job Information
13857 Separaton Information
13858 Send to Text File
13859 Sent to Printer
13860 Text File Name
13861 Print File Name
13862 Print Driver Name
13863 Print Device Name
13864 Apply Default To All Pages
13888 Print
13889 Print Options
13890 Level 1
13891 Level 2
13892 PostScript 3
13893 Prepress...
13894 N-up Format
13895 Signature Layout
13896 Signature Layout (Front)
13897 Signature Layout (Back)
13898 Nothing is selected to be printed. Check your page range and/or color separation settings.
13899 You have requested that the name of the current signature layout be included in this print style. However, the current signature layout has not been saved.\n\nDo you wish to save the current signature layout?\n\n
13900 Choose Yes to save this signature layout now, No to continue saving this print style without the name of a signature layout, or Cancel if you do not wish to save this print style at this time.
13901 You have requested that the name of the current n-up format be included in this print style. However, the current n-up format has not been saved.\n\nDo you wish to save the current n-up format?\n\n
13902 Choose Yes to save this n-up format now, No to continue saving this print style without the name of a n-up format, or Cancel if you do not wish to save this print style at this time.
13903 Generic Profile
13904 One signature per sheet (1-up)
13905 1 x 2 (2-up)
13906 2 x 1 (2-up)
13907 2 x 2 (4-up)
13908 2 x 3 (6-up)
13909 3 x 2 (6-up)
13910 3 x 3 (9-up)
13911 3 x 4 (12-up)
13912 4 x 3 (12-up)
13913 4 x 4 (16-up)
13914 Custom
13920 As in document
13921 Fit to page
13922 Center of page
13923 Top center
13924 Left center
13925 Right center
13926 Bottom center
13927 Top left corner
13928 Top right corner
13929 Bottom left corner
13930 Bottom right corner
13931 Custom
13936 -
13937 Not installed
13938 Not used for grayscale output
13939 Option
13940 Setting
13941 No printers installed
13942 Do not override
13943 (Portrait)
13944 (Landscape)
13945 Tiled pages: off
13946 Tiled pages: 1
13947 Tiled pages: %d
13948 x 1
13949 x %d
13950 Selection:
13951 Page range:
13952 (%s, %s)
13953 Maximum zoom level achieved.
13954 Zoom
13955 Pick Tool
13956 Signature Layout
13957 N-up Format
13958 Marks Placement
13959 Zoom Tool
13960 x:
13961 y:
13962 %
13963 Profiles
13964 Print
13965 You cannot print more than one document simultaneously. You must either wait for the current print job to finish or cancel it.
13984 On
13985 NT Double Download Workaround (PS):
13986 Off
13987 On
13988 NT Bookman Download Workaround (PS):
13989 Render to Bitmap Resolution (PS):
13990 Automatic
13991 150 dpi
13992 200 dpi
13993 250 dpi
13994 300 dpi
13995 350 dpi
13996 400 dpi
13997 450 dpi
13998 500 dpi
13999 550 dpi
14000 600 dpi
14076 Error loading %s.
14077 Cannot Open File
14078 User Defined
14079 Form Already Exists OverWrite?
14336 Corel Color Manager
14337 unnamed color
14338 unknown INK
14339 unknown PANTONE color %d
14340 white
14341 BLACK
14342 Transparent
14344 color %d
14368 CMY
14369 CMYK
14370 CMYK255
14371 RGB
14372 HSB
14373 Grayscale
14374 Uniform Colors
14375 PANTONE MATCHING SYSTEM« Colors
14376 PANTONE« Process Colors
14377 PANTONE« HEXACHROME (TM)
14378 Netscape Navigator (TM)
14379 Microsoft« Internet Explorer
14380 TRUMATCH Colors
14381 FOCOLTONE Colors
14382 Custom Palette
14383 Lab
14384 XYZ
14385 User Defined Inks
14386 YIQ
14387 HLS
14388 Palette
14389 Mixing Area
14390 Color Blend
14391 Registration Color
14392 SpectraMaster« Colors
14393 TOYO COLOR FINDER
14394 DIC Colors
14395 Lab Colors
14396 Image Palette
14397 Color Harmonies
14398 Ink
14399 Black Body
14400 Standard VGA
14401 System
14402 Uniform Colors
14403 Microsoft (R) Internet Explorer
14416 Le&vel:
14417 T&int:
14418 &C:
14419 &M:
14420 &Y:
14421 &K:
14422 &R:
14423 &G:
14424 &B:
14425 &H:
14426 &S:
14427 &B:
14428 &L:
14429 &a:
14430 &b:
14431 &X:
14432 &Y:
14433 &Z:
14434 &Y:
14435 &I:
14436 &Q:
14437 &L:
14438 &H:
14439 &S:
14440 B&lend:
14441 &O:
14442 Brush T&ype
14443 &Hard
14444 &Medium
14445 &Soft
14446 Unable to add color, color already in palette
14447 Value 1
14448 Value 2
14449 M&ore >>
14450 << &Less
14464 inch
14465 Default
14466 Dot
14467 Line
14468 Not enough disk space to save file %s.
14469 Opening
14470 Reading
14471 Writing
14472 Corel Color Manager
14473 Error %s %s file.
14474 untitled.cpl
14475 Custom palette (*.cpl)|*.cpl|
14476 Process palette (*.pal)|*.pal|
14477 Spot palette (*.ipl)|*.ipl|
14478 Select Color
14483 Delete '%s' from palette?
14484 You have not saved the changes to %s. Opening a new palette will discard these changes.\n\nDo you wish to continue opening a new palette?
14485 You have not saved the changes to %s. Creating a new palette will discard these changes.\n\nDo you wish to continue creating a new palette?
14486 The current custom palette is a Process Palette (%s) and cannot be saved under the *.%s format. To save your changes, rename the palette to a Custom Palette (*.%s).\nDo you wish to continue and discard your changes?
14487 The current custom palette is a Spot Palette (%s) and cannot be saved under the *.%s format. To save your changes, rename the palette to a Custom Palette (*.%s).\nDo you wish to continue and discard your changes?
14488 %s is not a valid palette filename.
14489 Not Enough Memory, Please close some applications and try again.
14490 Can't find file %s in directory %s
14493 untitled.bmp
14494 Color mixing files (*.bmp)| *.bmp|
14495 Open Color Mix File
14496 Save Color Mix File
14497 Open Palette
14498 Save Palette As
14499 New Palette
14500 BMP File (*.bmp)|*.bmp|
14501 Load Mixing Area File
14502 Save Mixing Area File As
14503 Error opening file %s.
14504 %s is not a valid mixing area file.\nOnly 1, 4, 8, and 24 bit non-compressed .BMP files are supported.
14505 Error reading file %s.
14506 Error - low memory.
14507 Open Palette...
14561 Warning
14617 C:
14618 M:
14619 Y:
14620 R:
14621 G:
14622 B:
14623 The specified color name has already been used. Please choose another name for this color.
14625 Hex. Yellow
14626 The number of colors in the Custom Color Palette has reached its maximum. Adding the new color will cause the last color to be overwritten.\nWould you like to add this color?
14627 Adding all colors will cause the maximum number of colors in the Custom Color Palette to be exceeded by %d colors. Delete some colors from the Custom Palette, or create a new palette before adding these colors.
14628 Custom Colors -
14640 OK
14641 %s calibration error.
14642 General error. Please check your Profile generating procedure.
14643 Not Enough Memory. Please close some applications and try again.
14644 Cannot open file %s.
14645 Incorrect file format or Bad values in %s.
14646 Not enough disk space, or file %s is read only.
14647 Incorrect file format or Bad values in %s.
14648 %s calibration error.
14649 %s calibration error.
14650 Exit Corel Color Manager?
14651 Time out
14652 Can't overwrite %s !
14653 File %s does not exist !
14654 Scanner calibration file %s does not exist.
14655 The file %s is read only. Please change the file attributes and try again.
14656 %s is not a valid System Profile.
14657 Incorrect file format or bad values in measurement file %s. Check that all colors are in XYZ100; check also that the file contains %d colors.
14658 Gam&ut Alarm
14659 &Measure From
14660 &None
14661 &Gretag SPM55
14662 XRite &DTP22
14664 Do you want to overwrite the existing file ?
14665 Other...
14666 Please wait...
14667 Generating the System Profile %s
14688 &Add Color to Palette
14689 &Swap Color
14690 B&rush Size
14691 &Small
14692 &Medium
14693 &Large
14694 &Color Viewer
14695 CMY&K - 3D Subtractive
14696 &RGB - 3D Additive
14697 HSB - &Hue Based (Default)
14698 HSB - &Brightness Based
14699 &CMY - 3D Subtractive
14700 HSB - &Wheel Based
14701 &Lab - Device Independent
14702 &YIQ - Television
14703 HSB - &Saturation Based
14704 &Load Bitmap...
14705 Sa&ve Bitmap...
14706 Cl&ear Bitmap
14707 Show Color Names
14708 &PostScript Options...
14709 &Grid Size
14710 Color Options
14711 Palette Options
14712 Mod&el:
14713 Typ&e:
14714 Mod&el:
14715 Selecte&d Color
14716 Add A&ll Grid Colors to Palette
14717 &Get Color
14718 &What's This?
14720 \ColorMgr.exe
14722 Could not load the Color Profile Wizard. Please ensure it is properly installed.
14723 Color Manager - Error
14724 Color Manager was unable to detect the selected device. \n Please check that the correct device has been selected, \n and that connections are in order.
14725 Color Manager was unable to read the measurement. Please try again.
14726 Device failed to validate password.\n Possible transmission error, please check connections and try again.
14727 An unspecified device error occurred with the Colortron II
14728 &XRite 918
14729 &Colortron II
14731 The DLL's %s and %s are both required for the Colortron II,\n and at least one could not be found.
14732 %s, which is required for the Colortron II, \ncould not be found.
14745 The calibration was successful.
14746 The calibration was not successful. Please try again.
14752 K:
14753 H:
14754 S:
14755 B:
14756 L:
14757 a:
14758 b:
14759 O:
14760 Color Name -
14761 Color Manager was unable to read the measurement. \n Please take the measurement again and check that \n Your Colortron II is calibrated correctly.
14762 The Colortron II is known to conflict with certain \ntablets causing them to function improperly. Do you \nstill wish to use the Colorton II?
21973 '%s - %s' is no longer available. A component\nof your application may have been uninstalled.
21974 '%s - %s' is no longer available.
21975 Reset the status bar to original settings? (This operation cannot be undone)
21976 Wednesday, September 30, 2000
21977 Table
21978 Columns
21979 Cancel
21980 &Update
21981 Save Copy &As...
21982 Main Table
21983 Clear Bitmap\nThis will clear off all the drawing irrevocably.\nAre you sure you want to proceed?
21984 Copy Bitmap\nSome other application has the clipboard ownership.\nRetry after closing all other applications.
21985 Paste Bitmap\nThis operation will erase the bitmap being edited.\nDo you want to continue?
21986 Paste Bitmap\nUnable to complete operation.\nMake sure that the clipboard contains a bitmap.
21987 Restore Defaults\nYou will lose the customized button properties irrevocably.\nAre you sure you want to proceed?
21988 Import Bitmap\nBitmap too large for the toolbar button.\nDo you want to shrink it to fit?\n\nHint: Shrinking may distort the image\n Click NO if you want to pan around the cropped bitmap
21989 Import Bitmap\nBitmap too large for the toolbar button.\nDo you want to shrink it to fit?\n\nHint: Shrinking may distort the image\n Click NO if you want to pan around the bitmap
21990 Drop File\nInvalid file format.\nYou can drop only .BMP and .DIB files
21991 Button Properties
21992 Edit &Scale...
21993 Re&solution...
21994 per tick
21995 Roll-Up Groups
21996 %s : %s
21997 This will cause the drawing scale to be reset to 1.0. Continue?
21998 Keyboard Shortcuts
21999 Page : %d
22000 Text File (*.txt)
22001 *.txt
22003 Spacing
22004 Frequency
22005 &X1:
22006 Y&1:
22007 &X:
22008 &Y:
22009 There is already a Roll-Up Group with that name. Please use a different name.
22010 &Other...
22011 1:
22012 2:
22013 3:
22014 Rotation values
22015 Link files
22016 The item '%s' referred by this link file is missing.\n\n Do you want to try to resolve the link ?
22017 Unable to delete the file '%s'\nA read-only attribute may be the cause.
22018 Unable to launch '%s'
22019 Shortcut to
22020 The maximum number of tabs are already present
22021 CorelDRAW!
22022 Error
22023 Error saving file
22024 Error allocating memory
22025 Image
22026 Text
22027 Shortcut Key Configuration
22028 Save the current shortcut key configuration in\n'%s' ?
22029 Reset to default application settings?
22030 Shortcut key Files (*.sck) | *.sck||
22031 Command\nTable\nKeyStroke\nDescription
22032 Keyboard Shortcuts
22033 Page : %d
22034 Shortcut keys print better in landscape mode\n Do you want to print in landscape mode?
22035 &Options <<
24848 Invalid file handle
24849 Out of Memory
24850 Invalid resource data
24851 I/O read error
24852 I/O write error or Disk is full
24853 Invalid file format
24854 Invalid header
24855 Invalid bitmap raw data
24856 Invalid compress data
24857 Internal Memory is corrupted
24858 Key is not in registry file.
24859 Invalid Parameters.
24860 Invalid filter.
24862 User Aborted
24863 Stack Violation
24864 Unrecoverable Error
24865 Invalid Arithmetic operation
24866 Memory Access Violation
24868 All Files
24869 *.*
24870 Import
24871 Export
24872 Full Image
24873 Crop
24874 Resample
24875 Partial Load
24903 Import Into Bitmap
24904 Bitmap Export
24916 Black and White
24917 Grayscale (8-bit)
24918 16 Colors
24919 Paletted (8-bit)
24920 RGB Color (24-bit)
24921 CMYK Color (32-bit)
24922 Option&s >>
24923 Option&s <<
24924 Pixels , Black and White (1-bit)
24925 Pixels , 16 Colors (4-bit)
24926 Pixels , Grayscale (8-bit)
24927 Pixels , 256 Colors (8-bit)
24928 Pixels , 16.7 Million Colors (24-bit)
24929 Pixels , 16.7 Million Colors (32-bit)
24930 Unknown
24931 Imp&ort
24932 E&xport
24933 bytes
24938 1 to 1
24939 640x480(VGA)
24940 800x600(SVGA)
24941 1024x768
24942 Custom
24943 Initial DIR
24944 Prev Check
24945 Import Type
24946 Use Def Value
24950 OPEN File Dialog
24951 SAVE File Dialog
24952 Option State
24954 Filter Manager
24955 Dithered
24956 Size Index
24957 Identical Value
24958 H Resolution
24959 V Resolution
24960 Width
24961 Height
24962 Anti Alias
24963 Resolution Index
24964 300 DPI
24965 200 DPI
24966 150 DPI
24967 75 DPI
24968 FAX Fine (200x100)
24969 FAX Normal (100x100)
24970 Color Index
24971 Color Profile
24972 Fountain Steps
24973 Aspect Ratio
24974 Apply Mask
24975 Uncompressed
24976 FILTER ID
24978 already exists.\n\nReplace existing file?
24979 Cannot access this file because it is being used by another process
24981 is not the same format as the selected filter.
24992 Raster
24993 Vector
24994 Text
24995 Animation
24996 Sound
25014 Check for Watermark
25017 Internet
25018 There must be at least one import/export filter available. A random filter was enabled.
25019 There are no import filters available
25020 There are no export filters available
25021 No Selection
25024 Pixels , Duotone (8-bit)
25025 Pixels , Lab Color, 16.7 Million Colors (24-bit)
25026 There are no internet filters available
25027 To enable changes to the installed filters, please close and re-open the current dialog
25028 Pixels , %ld Colors (%d-bit)
25029 Pixels , Grayscale (16-bit)
25030 Pixels , RGB (48-bit)
25031 Group Selected
25032 %s has an invalid file format
27461 Memory
27462 File
27463 Buffered
27464 An Unknown Error has occured in the Twain Source Manager during Initialization.\n\nTwain functionality will be disabled.
27465 The Twain Source Manager could not be Loaded, the file Twain_32.dll is either missing or corrupted.\n\nTwain functionality will be disabled.
27466 The Twain Source Manager could not be Initialized.\n\nTwain Functionality will be disabled.
27467 No Twain Drivers could be found.\n\nPlease make sure that your Twain Driver(s) have been installed properly.
27468 The Selected Twain Driver could not be enabled.\n\nThe driver is either busy, or the Hardware is not installed properly.
27469 An Unknown Error has occured during Image Acquisition.
27470 A Low Memory Error occured during Twain Image Acquisition.\n\nPlease try reducing the size of your Image.
27471 A Low Disk Space Error has occured during Twain Image Acquisition.\n\nPlease try reducing the size of your Image, or free up some disk space.
27472 The Selected Image is too large.\n\nPlease try reducing the size of your Image.
27474 The Twain Driver could not complete the Image Acquisition to Memory.\n\nPlease try Buffered, or File Mode from the Options Dialog.
27475 The Twain Driver could not complete the Image Acquisition in Buffered Mode.\n\nPlease try Memory, or File Mode from the Options Dialog.
27476 The Twain Driver could not complete the Image Acquisition to File.\n\nPlease try Memory or Buffered Mode from the Options Dialog.
27477 An Unknown Error occured when creating a temporary file.\n\nPlease check your Windows temp Directory and try again.
27478 The Selected Image has an unsupported Pixel Depth.\n\nPlease try reducing the number of colors in your image.
27479 Buffered Transfer Mode does not support Planar Data.\n\nPlease try Native or File Transfer Mode with this Twain Driver.
27480 This image contains an unsupported image data type.\n\nPlease check the options in your Twain Driver for B&W, Gray, or RGB Selections.
27481 This Twain Driver does not support File Transfer Mode.\n\nPlease try Native, or Buffered Mode from the Options Dialog.
27482 CorelSCAN 8
27483 Failed to launch CorelSCAN correctly
27490 Failed: %s %s\n\nIn order to use CorelSCAN with this Twain Driver, you must scan with the Vendor User Interface.
27491 Set Current
27493 Get Supported
27494 Get Current
27495 Image Layout
27496 Resolution
27497 Bit Depth
27498 Pixel Type
27499 CorelSCAN has detected a serious problem with a previous test using this device.\n\nDo you wish to try the test again?
27501 Testing: %s
27502 Feeder
27503 Native Resolution
27504 Physical Size
27505 Scan
27506 The Current TWAIN Driver has already been tested. \n\nDo you wish to perform the test again?
27507 CorelSCAN is about to begin a scan compatibility\ntest for the driver you have selected. Please\nsave ALL your work before starting this test.\n\nDo you wish to proceed?
27508 Protocol
27509 Scanner
27510 Unknown
27511 Driver UI
27512 Feeder
27513 Flat Bed
27514 An unknown error has occured.\n\nPlease make sure you Scanner software is installed properly.
27515 An error has occured while trying to access a Scanner protocol.\n\nPlease make sure your Scanner software is installed properly
27516 There is no Scanner currently selected.\n\nPlease choose the scanner you wish to use.
27517 No Scanners could be detected in your system.\n\nPlease make sure you have installed the software for your Scanner correctly
27519 A Low Memory Error occured.\n\nPlease try reducing the size of your Image, or close some applications
27520 A Low Disk Space Error has occured.\n\nPlease try reducing the size of your Image, or free up some disk space.
27521 There is a problem with the Image paramaters used for this scan.\n\nPlease try adjusting your Image and try again.
27522 An error occured while trying to create Scan Buffers.\n\nPlease free some memory and try again.
27523 Scanner reports that incoming image data is Planar.\n\nCorel currently does not support Planar Image Data.
27524 This image contains an unsupported image data type.\n\nPlease check the options in your Twain Driver for B&W, Gray, or RGB Selections.
27525 The Selected Image has an unsupported Pixel Depth.\n\nPlease try reducing the number of colors in your image.
27526 An error occured while trying to start your Scanner.\n\nPlease make sure it is connected properly.
27527 Generic Profile
27528 An error occured trying to start your scanner's Automatic Document Feeder.\n\nPlease make sure it is connected properly.
27529 You cannot run multiple instance of CorelSCAN
27530 None
28671 CorelCMS
53296 &Time and Date
53297 &None
53298 &Memory
53299 &State Icons
53300 &Keyboard States
53301 &Large Color Swatch
53302 Sm&all Color Swatches
53303 Object &Information
53304 Object &Details
53305 Small Color S&watches
54001 Opens the search dialog box, which searchs for help on a specific topic\nHelp Topics
54003 Displays copyright and program information\nAbout
54004 Controls where the contents of one or more document pages will be placed on each sheet of paper\nLayout
54005 Controls prepress settings, including printer's marks\nPrepress Options
54006 Controls color separation settings, if separations are enabled in the prepress options\nSeparations
54007 Controls miscellaneous printing options, such as proofing options and print quality\nMisc Options
