10 Warning: Load Config command is no longer supported and will be ignored.
11 Not enough memory
12 End of file
13 Warning
14 Error finding string in combo box
15 No connection
16 Combobox Error
17 Listbox Error
18 Invalid drive
19 File already exists
20 Invalid path specified
21 Unable to delete the configuration.\nIt is the default configuration of the Gateway
22 No more sessions available
23 Xfer setup error
24 Disk read error
25 Fatal Error
26 No 2nd connection (via gateway)
27 Entry not found:
28 Other side cancelled
29 Too many call nestings or return without gosub
30 Invalid script file
31 Error registering window class
32 Entry not found:
33 Unable to access file/device
34 Data out of bounds
35 Too many script levels
36 Not enough arguments
37 Invalid argument type
38 You must enter a user defined computer name.
39 Invalid arithmetic expression
40 Too many opened files
41 Error
42 Global variable redefinition
43 Btrieve error
44 Error finding string in list box
45 Packet synchronization error
46 Disk or Folder full
47 Unable to delete the configuration.\nIt is used by the Host PC entry:\n
48 Unable to delete the configuration.\nIt is used by the Online Service entry:\n
49 Unable to delete the configuration.\nIt is the default configuration of the Host
50 No data available
51 Error opening file
52 Prefix/Suffix deleted
53 Error on command line
54 Data compression error
55 Data uncompression error
56 Error adding string to combo box
57 Unable to send data
58 DOS error
59 Callback in progress
60 Too many retries
61 No carrier
62 Error adding string to list box
63 Bad file transfer block
64 String received
65 Invalid password
66 File not opened
67 Error compiling script
68 The file named WINAW.BIN cannot be found.\nPlease re-install pcANYWHERE.
69 Unable to create configuration files
70 Security violation
71 The name you have typed is already in use.
72 Bad data file: delete or use most recent backup.
73 Database manager not loaded
74 Database manager page size error
75 Unable to create the file:
76 Internal error
77 Unable to save changes because the entry was updated by another user
78 Unable to access data file
79 Not enough file handles.
80 You do not have read/write access rights for this data file
81 Internal Data File Error.
82 The description field cannot be blank
83 The password field cannot be blank
84 Folder cannot be deleted:
85 File cannot be deleted
86 Drive not ready
87 Password Entry Timeout must be between 1 and 99
88 Delay Before Callback must be between 5 and 9999
89 Break Length must be between 0 and 255
90 Max CPU Time must be between 1 and 10
91 Character Pacing must be between 0 and 255
92 Line Pacing must be between 0 and 255
93 Download Timeout must be between 0 and 255
94 Invalid Filename
95 Password already used
96 Password already used as Master Password
97 Seconds to Wait After Dial must be between 0 and 255
98 Number of redial attempts must be between 0 and 255
99 Seconds between redials must be between 0 and 255
100 Ring number to answer on must be between 1 and 10
101 Max Password attempts is invalid
102 Time Between Scans is invalid
103 Pace Character must be between 0 and 255
104 Folder already exists
105 Error running script editor
106 Error running host
107 Prefix/Suffix list full
108 Invalid Computer Name. Try Again?
109 Gateway designation incorrect
110 Port designation incorrect
111 Invalid command line arguments
112 Folder entry does not exist:\n
113 Incorrect Master Password
114 pcANYWHERE is not installed properly.\nPlease run INSTALL
115 You are not licensed for any more users.\nPlease see your network administrator.
116 Current video mode is not supported.
117 Error loading string resource
118 Unable to lock memory handle
119 Error getting window property
120 Error copying default config files
121 Error converting pcANYWHERE 4.5 files
122 This version of the program is not compatible in your country.\nPlease contact your Symantec dealer for information\nabout other available language versions.
123 NOT AUTHORIZED FOR USE ON SCANDINAVIAN MACHINES.\nPLEASE CONTACT THE PC SECURITY GROUP, PHONE +47.2.531153
124 Error reading LANPACK file
125 Path specified in 'AW' environment variable is invalid.\nFiles will be created in program folder\n
126 The 'select later' option, is not valid for host operation. \nPlease select another hardware setup or modify the current one:
127 Cannot Load Library:
128 Cannot Find Function:
129 Disk full: Recording turned off.
130 Cannot open record file: Recording turned off.
131 Not all of the drive mappings you have specified are available. Only unused host drives can be mapped to remote drives. You can check the actual drive mappings from the Online Settings selection on the Online Menu
132 Prompt Entry Timeout must be between 5 and 120
133 Login Name already used
134 You must specify a name for you custom modem.
135 The login name field cannot be blank
136 Unable to delete old file:
137 Error executing Cue-cards
138 Error executing Co-pilot
139 Unable to start the pcANYWHERE Host service.
140 Unable to start the pcANYWHERE Gateway service.
141 Unable to initialize the Norton Anti Virus Library.\nVirus scanning is disabled.
142 VIRUS DETECTED
143 AWIO: Invalid Parameter
144 AWIO: Invalid Path
145 AWIO: Invalid Client ID
146 AWIO: Invalid File Handle
147 AWIO: Insufficient Memory
148 AWIO: Error Writing File
149 AWIO: Error Reading File
150 AWIO: Sharing Violation
151 AWIO: Invalid Password
152 AWIO: File Already In Use
153 AWIO: File Not Found
154 AWIO: Access Denied
155 AWIO: Error Creating File
156 AWIO: Error Opening File
157 AWIO: Error Deleteing File
158 AWIO: Error Copying File
159 AWIO: Error Renaming File
160 AWIO: Error Reading/Writing File
161 AWIO: Error Setting Password Security
162 AWIO: Error Getting Password Security
163 AWIO: Error Cloning File
164 AWIO: Error Updating Record Block
165 AWIO: Error determining File System
166 AWIO: File is not a valid pcANYWHERE file.\n\n
167 You do not have rights to modify this file.
168 CONNPROC
169 CONNPROC
170 &About awras32...
171 pcANYWHERE [In Session]
172 AutoXfer does not contain any commands.\nTo add commands click the Add AutoXfer button on the pcAnywhere file manager.
173 Unable to initialize AutoXfer.
176 Some files that were Dropped/Pasted were not valid for the current mode and were ommitted from the operation.
177 Password do not match
178 Error opening Be a Host item
179 Error opening Remote Control item
180 Error opening Gateway item
181 Error opening Online Service item
182 There are no devices selected in the connection item
183 When running the pcANYWHERE Host as a Windows NT Service the Be A Host item must reside on a local drive.
184 When running the pcANYWHERE Host as a Windows NT Service the Callers directory must reside on a local drive.
185 LANA number must be between 0 and 255
207 AWLOG.$$$
256 remote.dll
257 online.dll
258 behost.dll
259 config.dll
260 quick.dll
261 gateway.dll
262 scripts.dll
263 utils.dll
264 AW
265 WINAW.BIN
267 winaw32.hlp
268 pcANYWHERE
269 pcANYWHERE32
270 RemoteAccessAPI
271 AWREMACC
272 Creating Default Files.
273 pcANYWHERE Starter Edition
274 Setting up default configuration files
275 Script Compiled Successfully
276 Translation Table ( %s )
277 winaw32t.hlp
304 COM1
305 COM2
306 COM3
307 COM4
308 Custom
309 Int 14
310 IPX
311 NetBIOS
312 Banyan VINES
313 Telebit ACS
314 NASI/NCSI
315 TCP/IP
316 Always connected
317 Carrier detect (DCD)
318 Data set ready (DSR)
319 Ring indicator (RI)
320 Clear to send (CTS)
321 Receive 2 <CR>'s
322 Modem response
323 75
324 110
325 300
326 600
327 1200
328 2400
329 4800
330 9600
331 19,200
332 38,400
333 57,600
334 115,200
335 <None>
336 Odd
337 Even
338 Mark
339 Space
340 RTS/CTS
341 XONXOFF
342 Both
343 Always OFF
344 Always ON
345 On While Connected
346 Yes-Coldboot Always
347 Yes-Warmboot Always
348 Yes-Coldboot if Connection Lost
349 Yes-Warmboot if Connection Lost
350 Host and Remote
351 Max
352 rcd
353 scr
354 scx
355 trn
356 Parallel Port
357 hi1
358 hw1
359 ci1
360 lc1
361 hc1
362 rc1
363 windows
364 load
365 scn
366 txt
367 mk7
368 sv6
369 pc6
370 ci6
371 hw6
372 cn6
373 awemulat.dat
374 awmodem.dat
375 awtrm.dat
376 Level 1
377 Level 2
378 Level 3
379 Type 1
380 Type 2
381 sv5
382 os6
383 @@@___
384 ini
385 bin
386 Converting pcANYWHERE v1.0 database files
387 Converting pcANYWHERE v4.5 database files
388 cn5
389 Level 3
390 Level 2
391 Level 1
392 Host and Remote
393 Script Name
394 Description
400 Change to full screen
401 End remote control session
402 Load file transfer
403 Start/stop session recording
404 Save the current screen
405 Restart Host computer
406 Execute a script
407 Transfer clipboard to or from Host
408 View/modify online options
409 Chat with Host operator
410 Screen scaling
411 Send Ctrl-Alt-Del to Host
412 Run AutoXfer
413 View performance information
416 Not allowed
417 Yes - Initially Off
418 Yes - Initially Level 1
419 Yes - Initially Level 2
420 Yes - Initially Level 3
421 Discard
422 Host
423 Remote
424 Both
425 Keystrokes only
426 Color
427 Resolution
428 No
429 Ctrl+C Only
430 Ctrl+C and Ctrl+Break
431 Remote
432 Disabled
433 2048K
434 3072K
435 4096K
436 5120K
437 6144K
438 7168K
439 8192K
440 9216K
441 10240K
442 11264K
443 12288K
444 13312K
445 14336K
446 15360K
447 16384K
448 Online Service
449 Be A Host PC
450 Call A Host PC
451 Connect
452 Call
453 Host
454 Discard
455 Yes - Initially Level 3
456 Yes - Initially Level 2
457 Yes - Initially Level 1
458 Yes - Initially Off
459 Not allowed
460 Disabled
464 R-Shift L-Shift
465 Ctrl R-Shift
466 Ctrl L-Shift
467 Ctrl R-Shift L-Shift
468 Alt R-Shift
469 Alt L-Shift
470 Alt R-Shift L-Shift
471 Alt Ctrl
472 Alt Ctrl R-Shift
473 Alt Ctrl L-Shift
474 Alt Ctrl R-Shift L-Shift
480 Alt+0
481 Alt+1
482 Alt+2
483 Alt+3
484 Alt+4
485 Alt+5
486 Alt+6
487 Alt+7
488 Alt+8
489 Alt+9
494 End Of Session
495 Lost Connection
496 Delete?
497 Exit pcANYWHERE
498 You must end your session before you can exit
499 The host is not responding. Do you want to end the session now?
500 Terminal
501 AutoFontSize
502 AutoScrollBars
503 ShowStatusBar
504 DOSFontName
505 DOSCharHeight
506 DOSCharWidth
507 BackspaceSendsDEL
508 UseGatewayDialog
525 Clipboard
526 TransferDirection
527 ClipboardItems
550 Printer
551 FlushTimeout
608 Host computer &name:
609 More >>
610 Less <<
611 List >>
612 List >>
613 &Window
614 &Terminal
615 Remote
616 Host
617 Hardware
618 General
619 Emulations
620 Transfer
621 Gateway
622 Call A Host PC
623 Call Online Service
624 Be A Host PC
625 pcaw.ini
626 \/:;,.<>=+|[]_?*
627 winsize
628 WinSizeleft
629 WinSizeTop
630 WinSizeWidth
631 WinSizeHeight
632 Host
633 Remote
634 New User ID entered. \nAre you sure you want to use it?
635 \/:;,.<>=+|[]_
636 InstallDir
640 XMODEM
641 XMODEM-CRC
642 XMODEM 1K
643 XMODEM 1KG
644 YMODEM
645 YMODEM G
646 ZMODEM
647 KERMIT
648 ASCII
649 pcANYWHERE
650 None
651 Strip
652 Add LF
653 Never overwrite duplicate files
654 Always overwrite duplicate files
655 Verify before overwriting
656 Always ask for destination
657 Overwrite older files only
658 Prompt when pressed
659 Always execute locally
660 Always take effect on host
661 <Default Caller>
662 Phone &number:
663 PC EMULATION
664 Register
665 Add CR
666 Always Take Affect on Host
667 Always Execute Locally
668 Prompt When Pressed
701 AutoXfer Interrupted
702 Not all files transfered successfully. ^m^j^m^j
704 AWEDIT32
705 WINHOST.EXE
706 Script File Errors have been detected.\nWould you like to edit the script file?
707 .err
708 AWEDIT32 /b %s
709 AWEDIT32 /b "%s" "%s"
710 Log (*.log)|*.log|
711 Select Destination File For Output
712 am
713 pm
714 ANSI
715 pcANYWHERE Terminal
716 PRINTER
717 File Transfer (*.*)|*.*|
719 .RL7
720 There are no Callers defined and you have\nspecified that Callers have individual\nprivileges. Would you like to use default\n parameters now? \n(otherwise Host operation will be cancelled)
721 OMNSIC
722 RH
723 DWVS
724 Cancel Session?
725 Select
726 Recording File (*.RCD)|*.RCD|
727 Select Recording File
728 Hayes compatible
729 <Any>
730 Translation File (*.TRN)|*.TRN|
731 Select Translation File
732 @@@
733 Server Gateway Port
734 Server Pools
735 Server
736 UserID
737 M
738 W
739 D
740 V
741 Session %d
742 RL7
743 HL7
744 Windows Version %d.%d
745 Enhanced Mode
746 Standard Mode
747 Free Space %ld K
748 pcANYWHERE Development Credits
749 The 'Lock PC' option requires a Master Password. \n Selection Ignored.
750 Select Files to Send Using
751 Select File to Receive Using
752 Licensed for %d user(s)
753 AWEDIT32 /b
754 ___
755 QW
756 QD
768 The specified folder does not exist
769 The specified folder is not a valid path
784 kbdno.dll
785 kbdsw.dll
786 kbdda.dll
787 kbdfi.dll
788 nor
789 sve
790 dan
791 fin
792 system.ini
793 awlp32.dll
794 awxferui.dll
795 awscr32.dll
796 awplybck.dll
797 awlog32.dll
800 pcANYWHERE Custom Modem
801 Init
802 DialPrefix
803 DialSuffix
804 Answer
805 Disconnect
806 ConnectResponse
807 ErrorResponse
808 NoCarrierResponse
809 NoAnswerResponse
810 BusyResponse
811 NoDialToneResponse
812 NoConnectResponse1
813 NoConnectResponse2
814 NoConnectResponse3
815 Name
816 modem.ini
817 Custom Modem
818 AT&FE0V1
819 ATDT
821 ATS0=1
822 ~+++~ATS0=0
824 ERROR
825 CONNECT *
826 NO CARRIER
827 NO ANSWER
828 BUSY
829 NO DIALTONE
840 TCPIPComputerName
841 TCPIPHostNames
842 Name
843 You have exceeded the maximum allowed number of TCP/IP host names. Please remove one or more names before proceeding.
844 Scripts
845 RawData
846 WaitStringSize
850 LPT1
851 LPT2
852 LPT3
853 LPT4
911 yes
912 o
913 ^M~N25~OK~P
914 %N
915 ^M~
916 ^M~
917 D10~o^M~o
918 ~W10~o
919 ^M~P
920 o^MATX1D^M~
921 o^MATA^M~
922 B
923 ~-99~
924 ~-2~
925 ~-4~
926 ~-6~
927 ~-5~
928 Macro Key File (*.MK7)|*.MK7|
929 Select Macro Key File
945 Host Drive [%c:] - not mapped
946 Host Drive [%c:] Mapped to your [%c:]
947 &Login Name:
948 &Password:
949 oldfiles
950 file
951 Delete old pcANYWHERE files?
952 Delete Old Files
953 By clearing this option, each existing caller entry will have their password automatically set to their current login name in order to avoid conflict of passwords.
954 By setting this option, each existing caller entry will have their login name automatically set to their current password.
955 It is recommended that you manually review the passwords and that you inform your remote users of this change. Note: Passwords will all be in uppercase.
956 It is recommended that you manually review and change the login names and that you inform your remote users of this change.
957 Require Login Names for Callers
958 Host
959 Device
960 ComputerName
961 Please confirm the new password.
962 The new and confirm passwords do not match.
963 Inactive timeout must be between 1 and 99.
964 Login attempts must be between 1 and 99.
965 Time allowed must be between 1 and 9999.
966 Dial-up networking
967 Callers
968 Inactivity timeout must be between 1 and 999.
969 SPX
970 &Incoming device:
971 De&vice list:
972 At least one device must be selected.
973 ASCII Protocol Settings
974 pcANYWHERE Protocol Settings
975 ZMODEM Protocol Settings
976 Application Options
977 An error condition has occured while scanning the current file for a virus.\nVirus scanning will be disabled for the remainder of this session.
978 Host Drive [%c:] Mapped to your [%c:]
979 Host Drive [%c:] - not mapped
980 awconn32.dll
1000 Loading File Transfer
1001 5
1002 0
1003 256 colors
1004 16 colors
1005 4 colors
1006 2 colors
1007 %s Properties
1008 Choose up to two devices for this connection item by checking the boxes to the left of the device names.\nTo customize a device, click the device name and then click Details.
1009 To choose an incoming and outgoing device, check the box to the left of the device name.\nTo customize an incoming or outgoing device, click the device name and then click Details.
1010 pcANYWHERE for Windows v2.x
1011 pcANYWHERE for Windows v1.x
1012 pcANYWHERE for DOS v5.0
1014 AWREM32 %s
1015 TAPI
1016 ANSI
1017 OK
1018 Remote user wants to cancel?
1019 Remote Cancel
1020 Cancel transfer in progress?
1021 Cancel File Transfer
1022 Overwrite Existing File?
1023 File Already Exists
1024 Host does not support directory transfers
1025 Files to Send:
1026 Files to Receive:
1027 Files Sent:
1028 Files Received:
1029 Bytes Synched:
1030 Files Synched:
1031 Cancel
1032 What is the Host PC's name? If you don't enter a name here, a list of available hosts will be displayed when you start your connection.
1033 What is the host's phone number? If you don't enter a phone number here, you'll be prompted for one when you start your connection.
1034 Please select a device for this connection item.\nTo customize the device click Details.
1035 Please choose an incoming and outgoing device for this connection item.\nTo customize the device click Details.
1036 Another Be A Host connection item has already been selected to launch at startup.\nDo you wish to use this instead?
1037 Unable to open %s.\nDo you still want to start this host with Windows?
1038 chf
1039 bhf
1040 osf
1041 gwf
1042 NAK
1043 Timeout
1044 Disk write error
1045 Disk full
1046 Disk read error
1047 Bad block
1048 Bad data
1049 Checksums don't match
1050 Cancelled
1051 Cancelled
1052 Create file error
1053 Open file error
1054 Transfer Complete
1055 Resuming transfer
1056 Setting position in file
1057 File skipped
1058 Sending
1059 Receiving
1060 Waiting for Sender
1061 Waiting for Receiver
1062 Transfer cancelled by other side.
1063 2 colors
1064 RL7
1065 HL7
1066 Start Date
1067 Start Time
1068 End Date
1069 End Time
1070 Duration
1071 Caller CPU
1072 Caller
1073 License
1074 Disconnect
1075 File Transfer\n
1076 Files Transferred: %-3.3d\n
1077 Number of Sessions: %-3.3d\n
1078 \n\nSUMMARY\n
1079 %s\n%s session start: %s\n
1080 HH7
1081 Dial Entry
1082 Host CPU
1083 Licensee
1084 Transfers
1085 \n%-20.20s Remote Log: %s -to- %s\n\n
1086 \n%-20.20s Host Log: %s -to- %s\n\n
1087 RH7
1088 Comments
1089 log
1090 .log
1091 %s\n
1092 pcANYWHERE
1093 XMODEM
1094 XMODEMC
1095 XMODEM 1K
1096 XMODEM 1KG
1097 YMODEM
1098 ZMODEM
1099 KERMIT
1100 ASCII
1101 Remote logged off
1102 Host ended session
1103 Connection lost
1104 Remote Cancelled
1105 Inactivity timed out
1106 Usage time out
1107 Host rebooted
1108 Remote rebooted
1109 Login Failed
1110 Invalid Password
1111 RSESSION
1112 HSESSION
1113 TRANSFER
1114 START
1115 CALLER
1116 PCNAME
1117 LICENSEE
1118 COMMENT
1119 STATUS
1120 END
1121 PROTOCOL
1122 DIRECTION
1123 FILE
1124 SIZE
1125 SEND
1126 RECEIVE
1127 CONNECT
1128 HOST
1129 XFER
1130 VIRUS SCAN
1131 4 colors
1132 16 colors
1133 256 colors
1134 Unable to start a session because there are no licenses available. Please see your network administrator.
1135 "
1136 *.
1137 Unable to start a session because the license database cannot be found. Please see your network administrator.
1138 R
1139 X
1140 .
1150 Disabled
1151 Clean
1152 Infected
1153 Error Condition
1230 RWSC
1231 WAIT_DLG
1232 RETRYDLG
1233 *.*
1234
1235 %02d%c%02d%c%02d
1236 .KEY
1237 .TRN
1238 .SCR
1239 .SCX
1240 intl
1241 iDate
1242 iTime
1243 sDate
1244 /
1245 sTime
1246 :
1247 $$SCRTMP.
1248 AWSCRIPT.DAT
1249 Error opening AWSCRIPT.DAT
1250 Are you sure you want to delete the script file?
1308 AWVGA.DRV, AWEGA.DRV, AWVGAMON.DRV.\nand can be copied to the host's Windows SYSTEMS directory.
1309 and fonts to be displayed. Compatible drivers were included with\nyour version and should be in your pcANYWHERE directory.\n\nThese driver files are named:\n
1310 The Windows video drivers on the host are not fully compatible\nwith your version of pcANYWHERE, which can cause incorrect colors\n
1311 header.scr
1312 ***** Error - there was a problem generating this line.
1313 Send String
1314 Wait String
1315 Description
1316 Script Generation
1317 but compiled with errors.
1318 and compiled properly.
1319 The script file has been generated
1320 Remote session log
1321 Host session log
1322 Remote history log
1323 Host history log
1324 Log (*.log)|*.log|All (*.*)|*.*|
1325 (recording script)
1326 Script Files (*.SCR)|*.SCR|
1327 Save Script File As
1328 OLE initialization failed. Make sure that the OLE libraries are the correct version.
1329 OLE initialization failed. Make sure that the OLE libraries are the correct version.
2065 You must select a network protocol to use for remote control.
2066 /e%s /w
2067 Could not create dial-up network remote control file.
2068 Could not find remote ctrl file <RAS.CHF>. Remote control will not be possible.
2069 %s /x
2070 Add Remote Networking Item
2071 awgate.exe
2072 Could not start the requested service.
2073 %s could not be started.
2074 Stop the %s?
2075 Stop the Service?
2076 Could not stop %s.
2077 Could not stop the service.
2078 Could not launch %s.
2079 Could not start program.
2080 %s /l
2081 %s /c
2101 pcANYWHERE 7.5 Host Wizard
2102 Fill in the following fields to enter the minimum information required to configure a host.
2103 Enter the name to appear below the host's icon.
2104 Enter the name of the host as seen by the remote
2105 What type of hardware configuration would you like?
2106 Select the privileges callers will have once they are connected.
2107 All Files(*.*)
2108 ANSI
2109 %s /d
2110 %s /c /d
2111 The host caller folder: '%s' does not contain any caller items.\n Would you like to allow full access to all callers ?
3000 Name
3001 Callback
3002 The current caller folder does not contain any caller items.\n\nPlease add a new caller, specify a new caller folder, or click\n"Allow full access to all callers" to remove caller security.
3050 Add Caller
4000 Name
4001 Phone Number
4002 Emulation
4003 Protocol
4050 Add Online Service Item
5000 Name
5001 Connections
5002 Class
5050 Add Be A Gateway Item
5051 Playback
5052 Begin Session Playback
5053 Playback Options
5054 Record Filename:
5055 Screen Filename:
5056 Session:
5057 Screen:
5058 of
5059 Last Recorded:
5060 Stop after each session
5061 Stop after each screen
5062 Repeat current session
5063 Repeat all sessions
5064 Continuous slide show
5065 Begin
5066 Select Playback File
5067 Record Files (*.RCD)|*.rcd|Screen Files (*.SCN)|*.scn|All Files (*.*)|*.*|
5068 Cannot open file
5069 The selected file is not compatible with this version
5070 Select Record File
5071 Record Files (*.RCD)|*.rcd|
5072 Select Raw Data File
5073 Raw Data Files (*.RAW)|*.raw|
5074 Select ASCII Data File
5075 ASCII Data Files (*.TXT)|*.txt|
5076 Stop Playback?
6000 Name
6001 Connection
6002 Caller Folder
6050 Add Be A Host PC Item
6132 << %s
6136 Establishing connection...Please hang up the phone.
6137 Dialing %s
6138 Waiting for a call...
6142 Initializing communications...
6143 Waiting for selection...
6144 Connecting to %s
6145 Initializing the modem...
6146 >> %s
6147 Waiting for connection...
6148 Hanging up the phone...
6149 Waiting for other user to acknowledge switch to voice...
6150 Pick up phone and press OK
6151 Waiting %d seconds before redial...
6152 Restarting the connection:\nHang up the phone.
6153 Enter the number to call
6154 Pick up the phone and press OK
6156 Hang up the phone
6157 Waiting %d seconds before redial
6158 Pick up the phone and press OK.
6159 Pick up the phone. When remote picks up, press OK.
6161 Direct Connection
6163 Voice mode requested
6164 Waiting for other user to acknowledge switch to voice.
6165 Hang up the phone.
6168 Telebit ACS
6169 %s
6171 Gateway %s
6172 Connecting...
6173 Need more information
6174 No Connection
6175 Connected
6177 Connecting to %s
6178 Connecting through a leased line
6179 Voice-First Connection
6181 The selected computer is busy. Connection cannot be made.
6182 %s at %s
6189 Waiting for Host PC to perform callback.
6192 Retrieving the list of TCP/IP hosts to search for...
6193 Scanning the network for TCP/IP hosts...
6220 %s
6221 %s
6224 Voice/Data switch
6225 %s Initializing...
6226 %s Waiting...
6227 %s Connecting...
6228 %s Disconnecting...
6229 %s Gateway Processing
6230 Modem Dialog
6231 [Host]
6232 [host]
6233 [Remote
6234 [Gateway]
6235 [NAS]
6236 Available
6237 Busy
6238 Unknown
6239 Gateway
6240 Dialing
6241 Connecting
6242 Ringing
6243 Busy
6244 Idle
6245 Incoming Call
6246 Connected
6247 Disconnected: Remote party disconnected
6248 Disconnected: Unknown Reason
6249 Disconnected: Remote party rejected call
6250 Disconnected: Local phone picked up
6251 Disconnected: Line Busy
6252 Disconnected: No Answer
6253 Disconnected: Unreachable
6254 Disconnected: No Dial Tone
6256 \nConfiguration information relating to Telephony services appears to be corrupt.\n Use the Control Panel to check the configuration for your telephone devices.
6257 \n Error initializing modem ! \n\n Please ensure that the modem is turned on and connected properly.
6258 \n Error initializing modem
6260 \n One of the components of the Telephony device driver is missing.\n Use the Control Panel to set up the driver properly.
6261 \n There are no devices configured for Telephony use. Would you like to run the Modem Control Panel to add a modem driver?
6262 \n You have two copies of the same Telephony driver installed.\n Use the Control Panel to remove one of the copies.
6263 \n TAPI Operation Failed for unknown reasons.
6264 \n A Telephony resource is temporarily unavailable. A non-TAPI application may be using the line Device.
6265 \n Unable to launch the Modem Control Panel
6266 \n A Telephony resource is temporarily unavailable. This could mean a short wait is necessary or that a non-TAPI application is using the line Device. Retry the last action?
6267 Cancelling
6268 Bidirectional
6269 %s Gateway : %s
6270 %s Host : %s
6271 %s Host Service: %s
6272 %s Remote : %s
6273 at %s
6274 Waiting %d seconds for network responses...
6275 %s Hosts
7000 Name
7001 Connection
7002 Network Host
7003 Phone Number
7050 Add Remote Control Item
7051 Add File Transfer Item
8000 The directory does not exist. \nMake sure the correct path is given.
8001 pcANYWHERE Data Conversion
8002 File Conversion Complete.
8003 The file does not exist. \nMake sure the correct path is given.
8004 pcANYWHERE File Import
8005 File Import Complete.
8006 pcANYWHERE File Export
8007 File Export Complete.
8008 Data Conversion Wizard
8009 Data Import Wizard
8010 Data Export Wizard
8011 Error exporting General Preferences.
8012 Could not locate configuration file:
8013 pcANYWHERE Data Export Error
8014 Error exporting files.
8015 Could not delete configuration file:
8016 Be A Host
8017 HW6
8018 New Gateway to Call
8019 pcANYWHERE Data Import Error
8020 \nAWCONVERT: No TAPI Modems Installed. \nModems will not be converted.
8021 Disk is full or write protected.
8023 .exp
8024 The hardware configuration "%s" could not be found. You will need to configure any items that reference it.
8025 Online Services
8026 Your Online Service records have been converted to use the modem "%s" configured for your system. You may need to reconfigure the modems in your Online Service items before you use them.
8326 "pcANYWHERE Online Services List Copyright (c) 1995-1996 Symantec Corporation"
8327 Callers
8328 pcANYWHERE
8329 pcANYWHERE Remote
8330 WinCache
8331 Script
8332 FontName
8333 CueCards
8334 Computer
8335 AttrTrans
8336 Graphics
8337 Print
8338 CharHeight
8339 CharWidth
8340 MouseDouble
8341 Error
8342 KeyHand
8343 SwapFileSize
8344 FullGraph
8345 Synch
8346 DownloadF
8347 FullScr
8348 UseServerList
8349 UseModemFactory
8350 PrintDevice
8351 Blink
8352 WinSystem
8353 LogicalFonts
8354 pcANYWHERE File Transfer
8355 Compress
8356 Crash
8357 Method
8358 Overwrite
8359 Virus
8360 DeleteDirectories
8361 TransferDir
8362 pcANYWHERE ZModem
8363 Crc32
8364 Data
8365 Auto
8366 pcANYWHERE Text Protocol
8367 RxTime
8368 CharP
8369 LineP
8370 Pace
8371 CrLf
8372 pcANYWHERE Colors
8373 pcANYWHERE Custom Modem
8374 pcANYWHERE Online Service
8377 NasiSelectLater
8380 CI
8386 CI:
8389 XInfo2
8391 XInfo4
8395 Nancy
8396 EmulName
8397 VScroll
8398 HScroll
8399 StatusLine
8400 AutoFontSize
8401 MacroKeyDisplayType
8402 MacroKeyLocation
8403 UseProgFKey
8404 UseXlate
8405 LocalEcho
8406 IgnoreColors
8407 StripBit8
8408 ScrollBackLines
8409 TerminalHeight
8410 TerminalWidth
8411 ForegroundColor
8412 BackgroundColor
8413 MacroFileName
8414 TranslationFileName
8415 EmulationName
8416 EmulationID
8417 DisplayItem
8418 LineWrap
8419 ScreenWrap
8420 BSWrap
8421 BsKey
8422 8Bit
8423 RecCR
8424 XmtCR
8425 CLRWCURRATTR
8426 CursorWrap
8427 CursorOffset
8428 ColumnFirst
8429 CommonEmulationName
8430 BreakLength
8431 PCAWDATA.TMP
8432 <Default Caller>
8433 DefaultCaller
8434 TCPIPHostNames
8435 Prefix/Suffix
8436 1
8437 yes
8438 true
8439 on
8440 0
8441 no
8442 false
8443 off
8444 LogProject
8445 LogComment
8446 FGColor
8447 BGColor
8448 AutoFontSize
8449 AutoScrollBars
8450 CRxlateUp
8451 CRxlateDown
8452 LFxlateUp
8453 LFxlateDown
9000 Could not load resource library!
9001 A name for this session must be entered.
9002 User name must be entered.
9003 The device previously selected for this connection item no longer exists.\nDefaulting to first available device.
9004 This host is configured to run at startup. The caller folder for this host must reside on a local drive to use this feature.
9005 No devices found.\n Please re-install pcANYWHERE.
9500 awrem32\n\nAwrem3\nCall Host Files (*.chf)\n.CHF\nRemoteCtrlFile\npcANYWHERE Remote Control File
9600 awonl32\n\nawonl3\nOnline Service Files (*.osf)\n.OSF\nOnlineServiceFile\npcANYWHERE Online Service File
10474 Invalid Login. Enter your login name:
10475 trailer.scr
10476 End Session?
10477 Record Files (*.RCD)|*.RCD|
10478 Select Recording File
10479 Selected printer does not support remote printing\nPrint data will be discarded.
10480 Select Save Screen File
10481 Screen Files (*.SCN)|*.SCN|
10482 &Online Menu...
10483 Cha&t
10484 Recordin&g OFF
10485 Recording O&N
10535 Available NASI/NCSI Devices
10536 Available Telebit ACS Devices
10537 Network Hosts
10538 \n\nThe currently installed SPX client does not support this function. Consult the README file for more information.
10539 \n\nUnable to open an SPX channel. Please check your network configuration.
10540 WSOCK32.DLL
10541 Gateway Error
10542 System Error
10543 Session %d
10544 %s No Connection
10545 To begin data mode, press OK and hang up the phone.
10546 \n\nUnable to open a TCP/IP channel. Make sure that TCP/IP and WINSOCK have been properly installed for your system.
10547 \n\n\nThe gateway was unable to attach to the specified host.
10548 \n\nUnable to open a Banyan channel. Make sure that the Banyan driver has been installed.
10549 \n\nUnable to open a Telebit ACS channel. Make sure that the Telebit driver, WSINF.DLL has been installed into the Windows SYSTEM directory.
10550 \n\nUnable to open an INT 14 channel. Make sure that the interupt 14 software has been activated before starting Windows.
10551 \n\nUnable to open a NetBIOS channel. Make sure that a NetBIOS driver has been installed.
10552 \n\nUnable to open an IPX channel. Only one active IPX connection is available at any time. Check your network configuration if this is your only session.
10553 \n\nUnable to open a NASI/NCSI channel. Make sure that a NASI or NCSI driver has been installed.
10554 \n\nUnable to open a communication channel. This can occur if there is not enough available memory.
10555 \n\nUnable to attach to specified device.
10556 \n\nThe selected port is not available. Either it does not exist or it may be in use by another application.
10557 \n\nMake certain that any device drivers needed for this device type have been loaded as appropriate either before starting Windows or in the SYSTEM.INI file.
10558 \n\nFind the process that is using this port and terminate its' session before attempting to connect through this device.
10559 \n\nAn internal program error has occurred.
10560 No response from the modem.
10561 Couldn't adjust to the connect speed.
10562 No answer dialing the other computer.
10563 Didn't receive the expected response from the modem.
10564 Error processing the modem script.
10565 Couldn't find the requested host.
10566 The polled computer is busy and can't be attached to.
10567 Timeout looking for connection.
10568 Communications error
10569 Communications error
10570 Error accessing memory.
10571 The requested communications device is already in use.
10572 Nasi: Dialing
10573 Nasi: Connecting
10574 Nasi: Connecting
10575 Nasi: Connected
10576 A Host with Execute protection can not be started with Windows.
10577 The selected modem for this connection item is no longer installed.\nPlease update this item's properties.
10578 There are no modems installed.\nPlease install a modem through control panel,\nor modify this item's properties.
10579 This connection item is configured to use a TAPI modem.\nTAPI is not currently supported on this operating system.
10580 This option will not take affect if the host's video driver does not support the feature in its current video mode. If it does not appear to work properly, try a different video mode on the host machine.
10581 Execute protection can not be placed upon a host object that is started with Windows.
10582 ISDNTB32.DLL
10583 \n\nUnable to open a CAPI/ISDN channel. Make sure that the CAPI driver has been installed.
10584 \n\nThe other computer has rejected your call.
10585 \n\nThis computer is not connected to an ISDN line.
10586 \n\nThe ISDN line is out of order.
10587 \n\nThe destination phone number is invalid or disconnected.
10588 \n\nThe destination phone number has been changed. Please obtain the new number and reconfigure the connection object.
10589 \n\nThis ISDN station is not authorized to place this call. Please contact your phone administrator.
10590 \n\nThe destination ISDN station is not authorized to receive calls. Please contact the phone administrator at the destination.
10660 \n\nUnable to open an Infrared channel. The Infrared communications drivers must be installed properly.
10670 \n\nSPX Host supported under Windows NT only if Microsoft Client is installed!
12513 pcANYWHERE [Logon - Delay Before Calling Remote]
12514 pcANYWHERE does not support Micosoft Windows 3.0. Please upgrade to Microsoft Windows 3.1 or above.
12515 pcANYWHERE - Driver Load Error
12516 An out of memory error has occurred. Please close some applications and try this operation again.
12517 pcANYWHERE does not support the video driver that is currently loaded.
12518 Bad parameters passed to driver loader.
12519 Not enough memory to hold the name of driver.
12520 An error has occurred trying to determine which video driver to load.
12521 An unknown error has occurred while trying to load pcANYWHERE drivers.
12522 An older version of pcANYWHERE has been installed. Please re-install this version or use the older version's main program to start host operation.
12523 pcANYWHERE Offline
24465 Backspace
24466 Tab
24467 Num keypad 5 w/o NumLock
24468 Enter
24469 Pause
24470 Caps Lock
24471 Esc
24472 SpaceBar
24473 Page Up
24474 Page Down
24475 End
24476 Home
24477 Left Arrow
24478 Up Arrow
24479 Right Arrow
24480 Down Arrow
24481 Print Screen
24482 Insert
24483 Delete
24484 0
24485 1
24486 2
24487 3
24488 4
24489 5
24490 6
24491 7
24492 8
24493 9
24494 A
24495 B
24496 C
24497 D
24498 E
24499 F
24500 G
24501 H
24502 I
24503 J
24504 K
24505 L
24506 M
24507 N
24508 O
24509 P
24510 Q
24511 R
24512 S
24513 T
24514 U
24515 V
24516 W
24517 X
24518 Y
24519 Z
24520 Numeric keypad 0
24521 Numeric keypad 1
24522 Numeric keypad 2
24523 Numeric keypad 3
24524 Numeric keypad 4
24525 Numeric keypad 5
24526 Numeric keypad 6
24527 Numeric keypad 7
24528 Numeric keypad 8
24529 Numeric keypad 9
24530 Numeric keypad *
24531 Numeric keypad +
24532 Numeric keypad -
24533 Numeric keypad .
24534 Numeric keypad /
24535 F1
24536 F2
24537 F3
24538 F4
24539 F5
24540 F6
24541 F7
24542 F8
24543 F9
24544 F10
24545 F11
24546 F12
24547 Num Lock
24548 Scroll Lock
24549 ; (semicolon)
24550 = (equal)
24551 , (comma)
24552 - (dash)
24553 . (period)
24554 / (forward slash)
24555 ` (apostophe)
24556 [ (left bracket)
24557 \ (backslash)
24558 ] (right bracket)
24559 ' (quote key)
32771 Display the properties of the selected item
32772 Connect to an Online Service\nCall Online Service
32773 Allow this computer to be remote controlled\nBe A Host PC
32774 Be a Gateway for other pcANYWHERE remote computers\nBe A Gateway
32775 Set pcANYWHERE configuration options\npcANYWHERE Configuration
32776 Exit pcANYWHERE\nExit
32777 Attach to a network as a remote node\nRemote Networking
32778 Connect to the selected computer or service\nConnect to a Computer
32779 Wait for a connection from the selected computer or service\nWait For Connection.
32780 Remote control a pcANYWHERE Host computer\nRemote Control
32781 Go to another folder\nSelect folder
32782 Display the properties of the selected item
32790 Display items using large icons\nLarge Icons
32791 Display items using small icons\nSmall Icons
32792 Display items in a list\nList
32793 Display information about each item in the window\nDetails
32796 Sort items alphabetically by name
32797 Sort item alphabetically by connection
32798 Sort items alphabetically by caller folder
32799 Arrange the icons automatically
32800 Arrange the icons automatically
32805 Rename the selected item
32806 Display the properties of the selected item\nProperties
32807 Display a brief description of the item
32808 Delete the selected items\nDelete selected items
32809 Allow this computer to be remote controlled\nLaunch Host
32810 Allow this computer to be remote controlled\nLaunch Host
32811 Sort items alphabetically by host name
32812 Sort items by phone number
32814 Temporary home for the caller container
32816 Sort items alphabetically by emulation type
32817 Sort items alphabetically by fix transfer protocol
32818 Sort items alphabetically by class
32819 Start a pcANYWHERE Gateway\nLaunch Gateway
32822 Playback recording files from past pcANYWHERE sessions
32823 Generate reports from pcANYWHERE log files
32824 Create, edit, and execute script programs
32825 Import configuration data from a text configuration file
32826 Export configuration data to a text configuration file
32827 Refresh the contents of the container\nRefresh contents
32828 Change application settings and options
32829 Change application settings and options
40001 Transfer files between this computer and another\nFile Transfer
40002 Connect to a remote computer in file transfer mode\nFile Transfer
