home *** CD-ROM | disk | FTP | other *** search
- Microsoft Money 97 README
- July 1996
-
- (c) Copyright Microsoft Corporation, 1996
-
- CONTENTS
- 1. Internet Quotes
- 2. High speed modems
- 3. Display color settings
- 4. Online Services with Windows NT
- 5. Online Services Call Summary
- 6. Online Services in Canada
- 7. Setup fails to register Schannel.dll
- 8. Display drivers
- 9. Printer drivers
- ___________________________________________________________________________
- 1: INTERNET QUOTES
- The Internet Quotes connection in Money works directly with the 32-bit
- WinSock included with Windows 95. Most full-service Internet providers
- (those not requiring custom software to access their service) will
- support the 32-bit WinSock. If you have questions about your Internet
- connection compatibility, ask your service if they support the Windows
- 95 32-bit WinSock. Money does not include an Internet service provider.
-
- You may also need 32-bit WinSock compatibility to use Online Banking --
- depending on your bank's type of Online Services.
-
- Money's Internet Quotes will automatically start the connection to the
- Internet if your service provider uses the standard connection method
- included with Windows 95. If your provider uses a different method,
- you may need to start your Internet connection before starting Money.
- ___________________________________________________________________________
- 2: HIGH SPEED MODEMS
- Using a high speed modem (faster than 9600 baud) with an older UART
- (the computer chip that controls the serial port) can result in
- transmission errors. Any 14.4 Kbps or faster modem requires the
- 16550AFN UART. Older UARTs might be labeled 8250 or 16450.
-
- To find out what kind of UART your computer has:
- 1. On the Windows 95 Start menu, point to Settings, then click Control
- Panel.
- 2. Double-click Modems.
- 3. Click the Diagnostics tab.
- 4. Highlight the port you want to check, then click the More Info button.
- 5. Windows will test your modem and report the results.
- 6. The type of UART you have will be listed in the Port Information section.
- 7. If you have an 8250 or 16450 UART, click OK, then follow steps 8-13. If
- you have a 16550 UART, your hardware is up to date.
- 8. Click the General tab.
- 9. Click Properties.
- 10. Click the Connection tab.
- 11. Click Port Settings.
- 12. Make sure the Use FIFO Buffers checkbox is NOT checked. Click OK.
- 13. Try your modem connection again. If you still have problems, you should
- upgrade your serial card to one with the 16550AFN UART.
- ____________________________________________________________________________
- 3: DISPLAY COLOR SETTINGS
- Money 97 is designed to work in 256-color mode. It will also run in 16-color
- mode, but the screens may be difficult to read.
-
- To check/change your color mode:
- 1. On the Windows 95 Start menu, point to Settings, then click Control Panel.
- 2. Double-click Display.
- 3. Click the Settings tab.
- 4. Check the Color Palette setting to see which mode your computer is
- running in. If your video card supports 256 colors, you'll see that option
- in the Color Palette drop-down menu.
- 5. Choose 256 Color from the list, then click OK. Windows will ask if you
- want to restart the computer so the change can take effect.
- ___________________________________________________________________________
- 4: ONLINE SERVICES WITH WINDOWS NT
- Money can not automatically establish an Internet connection in Windows NT,
- so NT users must start their Internet connection before starting Money to
- access Online Services.
- ___________________________________________________________________________
- 5: ONLINE SERVICES CALL SUMMARY
- The Call Summary contains information about what information was exchanged
- with your bank during your connection to Online Services. If an error occurs
- during a call, this Call Summary may not appear on subsequent calls in
- the same Money session. Should this happen, you can check the status of
- your transactions by going to the Home Banking area and clicking the
- Payments In Progress tab.
- ___________________________________________________________________________
- 6: ONLINE SERVICES IN CANADA
- After entering your bank's 8-digit routing number while setting up Online
- Services, you might get a dialog box saying there was a problem retrieving
- the online setup files and instructing you to try your call again or cancel
- setup. However, at release time, no Canadian banks offered Online Services.
- So, your call was probably completed successfully. Check with your bank for
- future Online Services capabilities.
- ___________________________________________________________________________
- 7: SETUP FAILS TO REGISTER SCHANNEL.DLL
- If you use Windows 95 and Money setup fails because it could not register
- Schannel.dll, try removing any networking applications from your Windows
- StartUp folder. Then reboot Windows and run Money Setup again.
-
- To remove applications from your StartUp folder:
- 1. On the Windows 95 Start menu, point to Settings, then click Taskbar.
- 2. Click the Start Menu Programs tab.
- 3. Under Customize Start Menu, click Remove.
- 4. Click the plus sign beside the folder Programs, then click the plus sign
- beside the folder StartUp.
- 5. Highlight any networking program you see.
- 6. Click Remove. This will not delete the program. It will only remove it
- from the menu.
- 7. Repeat steps 5 and 6 for all of your networking applications, then click
- Close.
- 8. Restart Windows and reinstall Money.
- 9. To put networking applications back in the StartUp folder, see Windows
- Help.
- ___________________________________________________________________________
- 8: DISPLAY DRIVERS
- If you're using an ATI display driver and you notice graphics problems in
- Money -- such as badly drawn graphs and charts, or black bars where your
- account balances should be -- please use the SVGA display driver that comes
- with Windows.
-
- To check/change your display driver:
- 1. On the Windows 95 Start menu, point to Settings, then click Control Panel.
- 2. Double-click Display.
- 3. Click the Settings tab.
- 4. Click Change Display Type.
- 5. If you see an ATI driver in the Adapter Type field, you may wish to
- change to the Windows driver.
- 6. To switch drivers, click the Change button next to the Adapter Type field.
- 7. Select Show All Devices, then on the Manufacturers menu, highlight
- (Standard Display Types) from the top of the list.
- 8. On the Models menu, highlight Super VGA, then click OK. Windows will ask
- if you want to restart the computer so the change can take effect.
- ___________________________________________________________________________
- 9: PRINTER DRIVERS
- If you have a Canon BJ-330, C-Itoh 8510, or IBM PPII 2381 printer, you might
- experience problems printing checks. You can get an updated driver from the
- manufacturer.
-
-