home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!cis.ohio-state.edu!bounce-bounce
- From: rubin@cis.ohio-state.edu (Daniel J Rubin)
- Newsgroups: sci.electronics
- Subject: Re: Need to find a source for small enclosures
- Date: 21 Jan 1993 11:42:52 -0500
- Organization: The Ohio State University Dept. of Computer and Info. Science
- Lines: 20
- Message-ID: <1jmjqcINNrjo@skiing.cis.ohio-state.edu>
- References: <C16nMF.B5H@acsu.buffalo.edu>
- NNTP-Posting-Host: skiing.cis.ohio-state.edu
-
- > Im manufacuring a small device in small numbers and I decided to use
- >a project case from Radio Shack. I belive 270-221. Its roughly 4.25*2.25
- >*1inch I believe. I dont have the catalog handy. Theyare not too expensive
- >and since I could not find a mail order replacement that was as inexpensive
- >and as customed to those dimensions I decided to stick with Radio shack
- >even they they cost $2.48 a piece with tax. My biggest problem is dealing with
- >them. Its alot of trouble to get the quantites I need and I only need 15.
-
- Did you try DigiKey? Their number is 1-800-DIGIKEY I think. If you need
- anything that Radio Shack has DigiKey almost always has it also at a much
- better price. Also try Mouser electronics, I do not have their number handy
- but you can call 800 directory service at 1-800-555-1212 and they shoud have
- it. Also try surplus dealers like All Electronics and Electronics Goldmine.
-
- - Dan
- --
-
- Daniel Joseph Rubin rubin@cis.ohio-state.edu
-
- GO BENGALS! GO BUCKS!
-