home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: rec.audio
- Path: sparky!uunet!usc!howland.reston.ans.net!bogus.sura.net!udel!louie!pecan.cns.udel.edu!bower
- From: bower@pecan.cns.udel.edu (Ty Bower)
- Subject: Re: Speaker vent placement question
- Message-ID: <1993Jan26.054811.11559@udel.edu>
- Sender: usenet@udel.edu (USENET News Service)
- Nntp-Posting-Host: pecan.cns.udel.edu
- Organization: University of Delaware, Newark
- References: <C19v5p.IzJ@usenet.ucs.indiana.edu> <1993Jan25.181901.10010@uicc.com> <C1FIoI.L9F@ecf.toronto.edu>
- Date: Tue, 26 Jan 1993 05:48:11 GMT
- Lines: 12
-
- Najeeb writes:
-
- >I have a Paradigm 7SEII and it is ported on the rear with two small bass ports.
- >Both ports are vents from one enclosure.
-
- The Paradigm 11seMkII has three ports in the rear. Two are right next
- to each other, the third one is slightly farther away and towards
- the bottom. It almost appears that it ports into a seperate section
- of the cabinent (there are screws between the top two and the bottom
- one which indicate the presence of a separating piece of MDF.)
-
-
-