home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!cs.utexas.edu!zaphod.mps.ohio-state.edu!menudo.uh.edu!navier.math.uh.edu!mcbryde
- From: mcbryde@navier.math.uh.edu (Jack Mcbryde)
- Newsgroups: comp.unix.aix
- Subject: Re: Memory upgrade (Kingston) in RS/530
- Date: 22 Jan 1993 04:46:08 GMT
- Organization: UH Dept of Math
- Lines: 24
- Message-ID: <1jnu6gINNeum@menudo.uh.edu>
- References: <stritzi.727656222@Physik.TU-Muenchen.DE>
- NNTP-Posting-Host: navier.math.uh.edu
- Keywords: rs530 memory
-
- In article <stritzi.727656222@Physik.TU-Muenchen.DE> stritzi@Physik.TU-Muenchen.DE (Peer Stritzinger) writes:
- >In a 530 with 4 memory boards (each 16 MByte) I tried to install
- >Kingston SIMM's (32 MByte per board) to get 2 spare sd1 boards.
- >
- >530 should take pairs of memory board. It showed out, that the machine
- >did only but, if at least THREE memory boards were installed.
- >
- >Has anybody had similar problems?
-
- The only thing that occurs to me is that, not only do they have to be installed
- in pairs, but they also have to be (are supposed to be, anyway) in particular
- slots. I don't recall the order of the slots, but if you can't find it in the
- docs, e-mail me and I will dig them out. Ah. (I decided to dig them out.)
- Slots are numbers A-H beginning at the top. The first pair of memory boards
- should go in slots D and H. The second pair go in slots B and F. The third
- in slots C and G and the fourth in (surprise) A and E.
-
- good luck,
- jack
- --
- jack mcbryde@karazm.math.uh.edu * All I ask of Thee, Lord
- * Christ died for our sins. Dare we * Is to be a drinker and fornicator
- * make his martyrdom meaningless by * An unbeliever and a sodomite
- * not committing them? - Jules Feiffer * And then to die. - Claude de Chauvigny
-