home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!comp.vuw.ac.nz!zephyr.grace.cri.nz!zephyr.grace.cri.nz!usenet
- From: mafk_s@chv.lincoln.cri.nz
- Newsgroups: comp.sys.mac.programmer
- Subject: RE: serial port Q
- Date: Thu, 28 Jan 93 02:19:37 GMT
- Organization: Canty Agriculture & Science Centre
- Lines: 21
- Message-ID: <1ka7lpINN38u@zephyr.grace.cri.nz>
- References: ,<mike.kopp-210193155731@kopp.gatech.edu>
- NNTP-Posting-Host: chv.lincoln.cri.nz
-
- >From: mike.kopp@gtri.gatech.edu (Mike Kopp)
- >Subj: serial port Q
- >Date: 21 Jan 93 20:56:32 GMT
- >
- >I am looking at writing a program that will do some simple serial
- >communications through the modem port. Can anyone recommend any sample
- >code?
- >
- >-----------
- >Mike Kopp
- >Electronic Support Measures Laboratory
- >Georgia Tech Research Institute mike.kopp@gtri.gatech.edu
-
-
- There is a very good article on serial ports in "The Best of MacTutor 4". I
- believe this is also available from the publishers on disk or CD-ROM.
-
- Kevin
- Ministry of Ag & Fish
- New Zealand
-
-