home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.hp
- Path: sparky!uunet!ukma!hp750!justin
- From: justin@hp750.me.engr.uky.edu (Justin Sullivan)
- Subject: Re: can you hook up a LaseJet to a 9000/7xx?
- Message-ID: <justin.728185083@hp750>
- Sender: news@ms.uky.edu (USENET News System)
- Nntp-Posting-Host: hp750.me.engr.uky.edu
- Organization: University Of Kentucky, Dept. of Math Sciences
- References: <1k727qINNac0@usenet.INS.CWRU.Edu>
- Date: Thu, 28 Jan 1993 01:38:03 GMT
- Lines: 24
-
- cew6@po.CWRU.Edu (Carlin E. Wiegner) writes:
-
-
- >can you hook up any of the Laserjet series to a 9000/7xx
- >workstation?
- >(how can I get some drivers?) thanks for the emailed replies.....
- >CW
-
- <ahem..>
- Hewlett-Packard to Hewlett-Packard? Does IBM trash work well with other
- disposable IBM equipment? Of course! Just use SAM.. (SAM 9.0 is very, very
- nice, BTW) If you're using a LaserJet with a PostScript cartridge, specify
- a postscript printer, not a LaserJet. You just tell SAM what printer it is,
- where it is (what port it hangs from) and it does the rest for you.
-
- This machine has a LaserJet IIIP (PostScript) on the Parallel port, a
- PaintJet XL on Serial Port A, and a LaserJet IIP (PostScript) on the 700/RX
- xterminal.. All configured through SAM in about 30 seconds.
-
- --
- * Justin P. Sullivan * justin@engr.uky.edu (Internet) *
- * System Administrator * justin@mik.uky.edu (NeXTMail) *
- * Computational Fluid Dynamics * JUSTIN@UKCC (BITNET) *
- * (606) 257-2268 * ukma!engr.uky.edu!justin (UUCP) *
-