home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.cbm
- Path: sparky!uunet!usc!sol.ctr.columbia.edu!The-Star.honeywell.com!umn.edu!csus.edu!netcom.com!fuzzy
- From: fuzzy@netcom.com (Fuzzy Fox)
- Subject: Re: 1581 vs. Datasette, which pin?
- Message-ID: <1993Jan24.043742.19852@netcom.com>
- Organization: Foxes 'R' Us - Seven locations to serve you
- References: <1993Jan23.215047.10120@iscsvax.uni.edu>
- Date: Sun, 24 Jan 1993 04:37:42 GMT
- Lines: 19
-
- gobeski8618@iscsvax.uni.edu (Steve 'Gobes' Gobeski) writes:
-
- >A while back (like last summer) I posted a question about the incompatibility
- >problem between 1581 drives and the datasette. Someone mentioned that the
- >problem was due to some or other serial line (FAST, I think) and stated that
- >cutting this pin in the serial cable would prevent the interference. Anyway, I
- >now have an extra serial cable but no longer can find the information I put
- >about which line to cut.
-
- The pin is labeled SRQ on most pinouts. Your C64 or C128 Reference
- Guide should have the pinouts inside it. That would be easier than me
- telling you that SRQ is pin 1, because you don't know which pin is pin 1
- without looking at the pinout. :)
-
- --
- #ifdef TRUE | Fuzzy Fox fuzzy@netcom.com
- #define TRUE 0 | a.k.a. David DeSimone an207@cleveland.freenet.edu
- #define FALSE 1 |
- #endif | "911 Emergency Rescue Service - Can you hold, please?"
-