home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!elroy.jpl.nasa.gov!decwrl!waikato.ac.nz!comp.vuw.ac.nz!actrix!David.Empson
- Newsgroups: comp.sys.apple2
- Subject: Re: 65802 problem
- Message-ID: <1993Jan26.090243.29670@actrix.gen.nz>
- From: David.Empson@bbs.actrix.gen.nz
- Date: Tue, 26 Jan 1993 09:02:43 GMT
- Sender: David.Empson@actrix.gen.nz (David Empson)
- References: <22JAN199310075283@rigel.tamu.edu>
- Organization: Actrix Information Exchange
- Keywords: 65802
- Lines: 28
-
- In article <22JAN199310075283@rigel.tamu.edu> a0m2504@rigel.tamu.edu (AKITOMO MORITA) writes:
- > Is anybody out there having problems using a 65802 inside a //e inplace of the
- > 65C02? I'm having trouble using the 65802 and running an old (OLD) Rana Elite
- > 5 meg hard drive. I've tried using a 65816 (since there was talk of this
- > earlier) but I had the sam problem with it.
- >
- > The hard drive has a card with ROM and RAM on it. In $C800-CFFF, the banks
- > $CC00-CFFF are used for ROM, and the other 1k can select either another ROM or
- > up to 7 1k RAM by reading $c0f8-c0ff (when the card is in slot 7). The problem
- > is that the demultiplexer is getting the wrong lower three bits and is
- > selecting the wrong set of RAM or ROM.
-
- I can't think of any reason why the 65802 would have problems. It
- might make sense if the 65C02 didn't work either. Presumably the RANA
- drive works fine with a normal 6502?
-
- > On another note, I noticed that the //e board has four silver(?) contacts on
- > the lower left-hand corner. Can I use these to power a logic probe? In other
- > words, does anybody know the signals or purpose of these contact?
-
- They're called the 'burn-in power pads', and they contain the voltages
- from the power supply (I'm not sure which order, but it includes
- Ground, +5, +12, -5 and -12).
- --
- David Empson
-
- Internet: David.Empson@bbs.actrix.gen.nz EMPSON_D@kosmos.wcc.govt.nz
- Snail mail: P.O. Box 27-103, Wellington, New Zealand
-