home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!haven.umd.edu!darwin.sura.net!spool.mu.edu!agate!usenet.ins.cwru.edu!neoucom.edu!aldhfn!legend!kentcomm!jperkski
- From: jperkski@kentcomm.uucp (Jim Perkowski)
- Newsgroups: comp.sys.amiga.misc
- Subject: Re: Backup software needed for Exabyte 8200
- Distribution: world
- Message-ID: <jperkski.03km@kentcomm.uucp>
- X-NewsSoftware: GRn 1.16f (10.17.92) by Mike Schwartz & Michael B. Smith
- Date: 25 Jan 93 19:28:19 EST
- Organization: Privately owned and operated UUCP site.
- Lines: 19
-
- In article <1k1461INN4bf@digex.digex.com> jclark@access.digex.com (Jamie H. Clark) writes:
- > I tried Matt Dillion's TAPE handler and GNUtar to backup my Amiga 3000
- > hard disk to Exabyte 8200 (2.3GB 8mm) tape drive. The tape drive light will
- > turn to inform me that it is writing data to the tape, then the SCSI bus
- > hungs up (hard disk light stays on). Is there any updated version of TAPE
- > handler and backup software that will work fine with Exabyte 8200?
- >
- > Jamie
- >
-
- Have you tried Ami-Back 2.0 with your DAT drive? It's supposed to work. There
- are some demo versions of Ami-Back 2.0 that you could try with it.
-
- --
- ____________________________________
- (Jim Perkowski)
- kentcomm!jperkski@legend.akron.oh.us
- kentcomm!jperkski@aldhfn.akron.oh.us
-
-