home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!charon.amdahl.com!pacbell.com!decwrl!hal.com!olivea!spool.mu.edu!agate!doc.ic.ac.uk!uknet!yorkohm!u2prh
- From: u2prh@ohm.york.ac.uk (Paul R Hedderly - H601/92)
- Newsgroups: comp.sys.acorn
- Subject: Re: Dongles affecting Printing
- Message-ID: <1993Jan26.192749.7532@ohm.york.ac.uk>
- Date: 26 Jan 93 19:27:49 GMT
- References: <ssudavss.727956414@reading>
- Organization: Electronics Department, University of York, UK
- Lines: 30
-
- From article <ssudavss.727956414@reading>, by ssudavss@csug.cs.reading.ac.uk (Captain_Kwok):
- > Has anybody out there noticed a little anomily that happens sometimes to
- > my system. I have an A5000, RO3.1, Canon BJ10EX and copies of Artworks and
- > Impression 2.
-
- > Now for the strange part.......
- >
- > It does this every time I try it until ... I run ArtWorks. This seems to
- > open up the parallel port and all printing is tickety boo. If I remove the
- > Artworks dongle I don't get this problem.
- >
- > Note. I don't have to have Artworks loaded all of the time, I just have to
- > have run it and quit.
- >
- > Any Ideas?
- >
- > Steve
- > ssudavss@uk.ac.reading
-
- Yes - Artworx has to load a module, which corrupts your printer signal,
- ready for the dongle to uncorrupt!
-
- Sorry! ;> (I *may* be wrong, and of course any views expressed, ......)
-
- Bungle!!
- --
- Alias ---- Paul Hedderly Anyone got a spare `Victoria'
- (or u2prh@ohm.york.ac.uk) that they wanna sell cheap?
- (or prhedder@nyx.cs.du.edu)
-
-