home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!rocket!newshost!damour
- From: damour@hobbes.sanders.lockheed.com (Kevin Damour)
- Newsgroups: comp.soft-sys.matlab
- Subject: Re: Matlab4.0 versus Framemaker3.1.1
- Message-ID: <DAMOUR.93Jan25142122@hobbes.sanders.lockheed.com>
- Date: 25 Jan 93 19:21:22 GMT
- References: <1993Jan22.202455.18778@news.nd.edu>
- Sender: news@rocket.sanders.lockheed.com
- Organization: Lockheed Sanders, Inc.
- Lines: 52
- In-reply-to: jeff@control.nd.edu's message of 22 Jan 93 20:24:55 GMT
-
- In article <1993Jan22.202455.18778@news.nd.edu> jeff@control.nd.edu (Jeffrey C. Kantor) writes:
-
- Path: rocket!uunet!spool.mu.edu!news.nd.edu!control!jeff
- From: jeff@control.nd.edu (Jeffrey C. Kantor)
- Newsgroups: comp.soft-sys.matlab
- Date: 22 Jan 93 20:24:55 GMT
- Sender: news@news.nd.edu (USENET News System)
- Reply-To: jeff@control.nd.edu
- Organization: University of Notre Dame
- Lines: 15
-
- I find myself unable to import eps files generated by Matlab 4.0 into
- Framemaker. I get a frame, but no graphics either on the printer or
- the screen.
-
- The Mathworks says the postscript generation is improved in 4.0A, but
- that didn't directly answer my question of whether this particular problem
- will be fixed.
-
- Does anyone else know?
-
- ---
- Jeffrey C. Kantor Email: Jeffrey.Kantor@nd.edu
- Dept. of Chemical Engineering Voice: 219 631 5797
- University of Notre Dame Fax: 219 631 8366
- Notre Dame, IN 46556
-
- I just had to create some graphs to include in FrameMaker 3.1a (or x)
- with version 4.0a Matlab. The print command with -deps and -preview
- worked just fine. I could rezise and move the image around, but I
- could not see the actual graph just a gray box representation. See if
- you site can upgrade to 4.0a that may solve your problems. (I still
- wish I could see the graph though).
-
-
- - kevin
- -----------------------------------------------------
- Dr. Kevin T. Damour Lockheed Sanders Inc.
- Principal Electrical Engineer PO Box 868,MER24-1583C
- Signal Processing Center of Technology Nashua, NH 03061-0868
- (usenet) ...!uunet!rocket!damour voice (603)885-9122
- (internet) <damour@rocket.sanders.com> fax (603)885-0631
-
-
- --
- -----------------------------------------------------
- Dr. Kevin T. Damour Lockheed Sanders Inc.
- Principal Electrical Engineer PO Box 868, MER24-1583C
- Signal Processing Center of Technology Nashua, NH 03061-0868
-
- (usenet) ...!uunet!rocket!damour voice (603) 885-9122
- (internet) <damour@rocket.sanders.com> fax (603) 885-0631
-