home *** CD-ROM | disk | FTP | other *** search
/ NetNews Usenet Archive 1993 #3 / NN_1993_3.iso / spool / comp / os / os2 / apps / 10613 < prev    next >
Encoding:
Internet Message Format  |  1993-01-23  |  2.0 KB

  1. Xref: sparky comp.os.os2.apps:10613 comp.os.os2.misc:43747
  2. Path: sparky!uunet!usc!news.cerf.net!proton!galaxy!duchow
  3. From: duchow@galaxy.ucr.edu (John Duchowski)
  4. Newsgroups: comp.os.os2.apps,comp.os.os2.misc
  5. Subject: SyTos 1.36 under OS/2 2.0
  6. Message-ID: <25373@galaxy.ucr.edu>
  7. Date: 23 Jan 93 03:07:44 GMT
  8. Sender: news@galaxy.ucr.edu
  9. Followup-To: comp.os.os2.apps
  10. Organization: University of California, Riverside
  11. Lines: 31
  12. Nntp-Posting-Host: galaxy
  13.  
  14. Hello,
  15.  
  16.    I have just purchased the Sytos Plus 1.36 for OS/2 2.0 to be used with the
  17. Jumbo 250 system.  The system has previously functioned flawlessly under DOS
  18. but I can't get it to work under OS/2 2.0 + Sytos combination. I had partial
  19. success using CP Backup 7.1 but the backups took a very long time and were
  20. frequently unreliable.
  21.  
  22.    I called both Sytos and Colorado earlier today but I wasn't really given
  23. any solutions other than "you have to figure out what your floppy address and
  24. interrupt levels are".  Well, I used a default installation procedure which
  25. installed the appropriate driver in the CONFIG.SYS of which I am informed
  26. during the boot up process.  The software has set itself up to function with
  27. DMA set to 2, IRQ to 6 and address of 3F0 h which are the specified default
  28. values listed in the manual.
  29.  
  30.    Using PC Tools System Info 7.1 utility, I obtained the following
  31. information about the floppy disk: IRQ of 6 and address of F000:EF57. Keeping
  32. the address set to 3F0 h I checked *all* of the other DMA channels and *all*
  33. of the other IRQs listed in the Set Up Backup Device window at which point I
  34. have ran out of ideas :(
  35.  
  36.    My system is Micronics i486 EISA, 33 MHz, OS/2 2.0 with Service Pak, Jumbo
  37. 250, and what looks like a cheap Taiwanese floppy/hard disk controller which
  38. however thus far gave me no problems whatsoever. I would really appreciate it,
  39. if someone could tell me how to get this up and running as I am really
  40. dependent on this device.
  41.  
  42.    Thank you for your time and assistance in this matter.
  43.  
  44. John Duchowski
  45.