NetNews Usenet Archive 1993 #3/NN_1993_3.iso/spool/comp/os/mswindo/programm/win32/3118

Text File | 1993-01-28 | 9.9 KB | 240 lines

Newsgroups: comp.os.ms-windows.programmer.win32
Path: sparky!uunet!news.univie.ac.at!scsing.switch.ch!univ-lyon1.fr!ghost.dsi.unimi.it!rpi!gatech!taco!jmbeesle
From: [e-mail] (JAMES MICHAEL BEESLEY)
Subject: Re:  Re: Transtor T128 NT driver
Message-ID: <[e-mail]>
Followup-To: Windows NT SCSI CD-ROM troubles
Originator: [e-mail]
Sender: [e-mail] (USENET News System)
Reply-To: [e-mail] (JAMES MICHAEL BEESLEY)
Organization: Big Ed's NT software, Inc.
References:  <[e-mail]>
Distribution: na
Date: Wed, 27 Jan 1993 14:16:37 GMT
Lines: 224


In article <[e-mail]>, [e-mail] (Jerome Schneider) writes:
>From: [e-mail] (Jerome Schneider)
>Reply-To: [e-mail]
>Date: Mon, 25 Jan 93 20:41:15 EST
>Message-ID: <[e-mail]>
>Path: taco!gatech!usenet.ins.cwru.edu!magnus.acs.ohio-state.edu!csn!atglab!jls
>Newsgroups: comp.os.ms-windows.programmer.win32
>Distribution: na
>Subject:  Re: Transtor T128 NT driver
>Followup-To: comp.os.ms-windows.programmer.win32
>Semder: [e-mail] (News system)
>Organization: Aspen Technology Group
>X-Mailer: UUPC/bsnews 2.1 modified
>Lines: 25
>
>
>
>> Its on ftp.cica.indiana.edu in the uploads directory, but
>> I have not been able to get it to work with my NEC74 CD-ROM...
>> If you have any luck (or anybody has any ideas...) let me know.
>> It hangs my 486/33 every time right before doing the check
>> disks on the hard disks...
>>                             -Jim.
>
>I have the T130B card rather than the T128, but trantor talks
>about both cards (see the NT readme file) in the section on setting
>interrupt jumpers for NT.  Under DOS, the T130 driver doesn't use
>interrupts, and the jumper default on my card was set to disable
>all interrupts (for use under DOS).  The NT driver documentation
>indicates the NT driver requires an interrupt (IRQ5 by default)
>set on the card.  If your T128 card has no IRQ selected, it could
>hang while booting, waiting for an interrupt from the card.
>
>Your mileage may vary.  Hope this helps.
>
>--
>Jerome (Jerry) Schneider             Domain: [e-mail]
>Aspen Technology Group               UUCP:   {uunet}!csn!atglab!jls
>PO Box 673, Ft. Collins, CO 80522    Voice:  [phone]
>
>
In article <[e-mail]>, [e-mail] (Jerome Schneider) writes:
>From: [e-mail] (Jerome Schneider)
>Reply-To: [e-mail]
>Date: Mon, 25 Jan 93 20:41:15 EST
>Message-ID: <[e-mail]>
>Path: taco!gatech!usenet.ins.cwru.edu!magnus.acs.ohio-state.edu!csn!atglab!jls
>Newsgroups: comp.os.ms-windows.programmer.win32
>Distribution: na
>Subject:  Re: Transtor T128 NT driver
>Followup-To: comp.os.ms-windows.programmer.win32
>Semder: [e-mail] (News system)
>Organization: Aspen Technology Group
>X-Mailer: UUPC/bsnews 2.1 modified
>Lines: 25
>
>
>
>> Its on ftp.cica.indiana.edu in the uploads directory, but
>> I have not been able to get it to work with my NEC74 CD-ROM...
>> If you have any luck (or anybody has any ideas...) let me know.
>> It hangs my 486/33 every time right before doing the check
>> disks on the hard disks...
>>                             -Jim.
>
>I have the T130B card rather than the T128, but trantor talks
>about both cards (see the NT readme file) in the section on setting
>interrupt jumpers for NT.  Under DOS, the T130 driver doesn't use
>interrupts, and the jumper default on my card was set to disable
>all interrupts (for use under DOS).  The NT driver documentation
>indicates the NT driver requires an interrupt (IRQ5 by default)
>set on the card.  If your T128 card has no IRQ selected, it could
>hang while booting, waiting for an interrupt from the card.
>
>Your mileage may vary.  Hope this helps.
>
>--
>Jerome (Jerry) Schneider             Domain: [e-mail]
>Aspen Technology Group               UUCP:   {uunet}!csn!atglab!jls
>PO Box 673, Ft. Collins, CO 80522    Voice:  [phone]
>
>
In article <[e-mail]>, [e-mail] (Jerome Schneider) writes:
>From: [e-mail] (Jerome Schneider)
>Reply-To: [e-mail]
>Date: Mon, 25 Jan 93 20:41:15 EST
>Message-ID: <[e-mail]>
>Path: taco!gatech!usenet.ins.cwru.edu!magnus.acs.ohio-state.edu!csn!atglab!jls
>Newsgroups: comp.os.ms-windows.programmer.win32
>Distribution: na
>Subject:  Re: Transtor T128 NT driver
>Followup-To: comp.os.ms-windows.programmer.win32
>Semder: [e-mail] (News system)
>Organization: Aspen Technology Group
>X-Mailer: UUPC/bsnews 2.1 modified
>Lines: 25
>
>
>
>> Its on ftp.cica.indiana.edu in the uploads directory, but
>> I have not been able to get it to work with my NEC74 CD-ROM...
>> If you have any luck (or anybody has any ideas...) let me know.
>> It hangs my 486/33 every time right before doing the check
>> disks on the hard disks...
>>                             -Jim.
>
>I have the T130B card rather than the T128, but trantor talks
>about both cards (see the NT readme file) in the section on setting
>interrupt jumpers for NT.  Under DOS, the T130 driver doesn't use
>interrupts, and the jumper default on my card was set to disable
>all interrupts (for use under DOS).  The NT driver documentation
>indicates the NT driver requires an interrupt (IRQ5 by default)
>set on the card.  If your T128 card has no IRQ selected, it could
>hang while booting, waiting for an interrupt from the card.
>
>Your mileage may vary.  Hope this helps.
>
>--
>Jerome (Jerry) Schneider             Domain: [e-mail]
>Aspen Technology Group               UUCP:   {uunet}!csn!atglab!jls
>PO Box 673, Ft. Collins, CO 80522    Voice:  [phone]
>
>
In article <[e-mail]>, [e-mail] (Jerome Schneider) writes:
>From: [e-mail] (Jerome Schneider)
>Reply-To: [e-mail]
>Date: Mon, 25 Jan 93 20:41:15 EST
>Message-ID: <[e-mail]>
>Path: taco!gatech!usenet.ins.cwru.edu!magnus.acs.ohio-state.edu!csn!atglab!jls
>Newsgroups: comp.os.ms-windows.programmer.win32
>Distribution: na
>Subject:  Re: Transtor T128 NT driver
>Followup-To: comp.os.ms-windows.programmer.win32
>Semder: [e-mail] (News system)
>Organization: Aspen Technology Group
>X-Mailer: UUPC/bsnews 2.1 modified
>Lines: 25
>
>
>
>> Its on ftp.cica.indiana.edu in the uploads directory, but
>> I have not been able to get it to work with my NEC74 CD-ROM...
>> If you have any luck (or anybody has any ideas...) let me know.
>> It hangs my 486/33 every time right before doing the check
>> disks on the hard disks...
>>                             -Jim.
>
>I have the T130B card rather than the T128, but trantor talks
>about both cards (see the NT readme file) in the section on setting
>interrupt jumpers for NT.  Under DOS, the T130 driver doesn't use
>interrupts, and the jumper default on my card was set to disable
>all interrupts (for use under DOS).  The NT driver documentation
>indicates the NT driver requires an interrupt (IRQ5 by default)
>set on the card.  If your T128 card has no IRQ selected, it could
>hang while booting, waiting for an interrupt from the card.
>
>Your mileage may vary.  Hope this helps.
>
>--
>Jerome (Jerry) Schneider             Domain: [e-mail]
>Aspen Technology Group               UUCP:   {uunet}!csn!atglab!jls
>PO Box 673, Ft. Collins, CO 80522    Voice:  [phone]
>
>
In article <[e-mail]>, [e-mail] (Jerome Schneider) writes:
>From: [e-mail] (Jerome Schneider)
>Reply-To: [e-mail]
>Date: Mon, 25 Jan 93 20:41:15 EST
>Message-ID: <[e-mail]>
>Path: taco!gatech!usenet.ins.cwru.edu!magnus.acs.ohio-state.edu!csn!atglab!jls
>Newsgroups: comp.os.ms-windows.programmer.win32
>Distribution: na
>Subject:  Re: Transtor T128 NT driver
>Followup-To: comp.os.ms-windows.programmer.win32
>Semder: [e-mail] (News system)
>Organization: Aspen Technology Group
>X-Mailer: UUPC/bsnews 2.1 modified
>Lines: 25
>
>
>
>> Its on ftp.cica.indiana.edu in the uploads directory, but
>> I have not been able to get it to work with my NEC74 CD-ROM...
>> If you have any luck (or anybody has any ideas...) let me know.
>> It hangs my 486/33 every time right before doing the check
>> disks on the hard disks...
>>                             -Jim.
>
>I have the T130B card rather than the T128, but trantor talks
>about both cards (see the NT readme file) in the section on setting
>interrupt jumpers for NT.  Under DOS, the T130 driver doesn't use
>interrupts, and the jumper default on my card was set to disable
>all interrupts (for use under DOS).  The NT driver documentation
>indicates the NT driver requires an interrupt (IRQ5 by default)
>set on the card.  If your T128 card has no IRQ selected, it could
>hang while booting, waiting for an interrupt from the card.
>
>Your mileage may vary.  Hope this helps.
>
>--
>Jerome (Jerry) Schneider             Domain: [e-mail]
>Aspen Technology Group               UUCP:   {uunet}!csn!atglab!jls
>PO Box 673, Ft. Collins, CO 80522    Voice:  [phone]
>
>
Thanks for the advice, that was the first half of the problem...
Now It does not hang, and if I look in the registry, it has
(under hardware/scsi) scsi bus 0, with the T128 card as id 7,
and an NEC 84 ver 1.0 as id 1 (finally!), but I don't get an
extra drive (E:) and it keeps saying that no scsi device is
present... Do I have to do anything else to get it to recognize
CD-ROM ? It would be nice if Trantor supplied the oemsetup.inf file
so that the automagic installation under setup would work...
Was your recognized automatically ? Should the id be different ?

Also, has anyone been using the XLIB for NT from ftp.uu.net ?
It worked after tuning out a few hundred warnings, but I can't
get the exit code to work, you have to reboot the machine to kill
the X-Windows program.  I'll have to look into it further, just
curious if anybody else has seen it...

                        -Have a nice day-
                               -Jim.