home *** CD-ROM | disk | FTP | other *** search
- From: jls@atglab.atg.com (Jerome Schneider)
- Reply-To: jls@atg.com
- Date: 26 Jan 93 01:41:15 GMT
- Message-ID: <1993Jan26.014115@atglab.atg.com>
- Path: sparky!uunet!gatech!usenet.ins.cwru.edu!magnus.acs.ohio-state.edu!csn!atglab!jls
- Newsgroups: comp.os.ms-windows.programmer.win32
- Distribution: na
- Subject: Re: Transtor T128 NT driver
- Followup-To: comp.os.ms-windows.programmer.win32
- Semder: news@atglab.atg.com (News system)
- Organization: Aspen Technology Group
- X-Mailer: UUPC/bsnews 2.1 modified
- Lines: 25
-
-
-
- > Its on ftp.cica.indiana.edu in the uploads directory, but
- > I have not been able to get it to work with my NEC74 CD-ROM...
- > If you have any luck (or anybody has any ideas...) let me know.
- > It hangs my 486/33 every time right before doing the check
- > disks on the hard disks...
- > -Jim.
-
- I have the T130B card rather than the T128, but trantor talks
- about both cards (see the NT readme file) in the section on setting
- interrupt jumpers for NT. Under DOS, the T130 driver doesn't use
- interrupts, and the jumper default on my card was set to disable
- all interrupts (for use under DOS). The NT driver documentation
- indicates the NT driver requires an interrupt (IRQ5 by default)
- set on the card. If your T128 card has no IRQ selected, it could
- hang while booting, waiting for an interrupt from the card.
-
- Your mileage may vary. Hope this helps.
-
- --
- Jerome (Jerry) Schneider Domain: jls@atg.COM
- Aspen Technology Group UUCP: {uunet}!csn!atglab!jls
- PO Box 673, Ft. Collins, CO 80522 Voice: (303) 484-1488
-
-