home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!paladin.american.edu!howland.reston.ans.net!usc!sdd.hp.com!spool.mu.edu!hri.com!noc.near.net!genrad.com!genrad.com!not-for-mail
- From: exd@cad15.genrad.com (Erik X. Duus)
- Newsgroups: comp.os.linux
- Subject: Ghostscript and Panasonic 24-pin printer
- Keywords: panasonic,ghostscript
- Message-ID: <1k1kk1INN10q@cad15.genrad.com>
- Date: 25 Jan 93 21:04:01 GMT
- Followup-To: comp.os.linux
- Distribution: usa
- Organization: GenRad, Inc.
- Lines: 20
- NNTP-Posting-Host: cad15.genrad.com
-
- I have managed to get the SLS distribution up and running on my 386 PC
- without much difficulty. However, I have tried to play around with the
- ghostscript executable that is part of the SLS distribution, and am
- having a little trouble with it.
-
- Ghostscript will print to the printer, and the output is almost correct,
- but bands of the text are shifted right by one or two pixels. The
- printer is a Panasonic KXP-2123 (24 pin dot matrix), and I was wondering
- if anyone else had experienced this same behavior.
-
- E-mail would be appreciated to cut down on the bandwidth.
-
- Thanks very much
-
- Erik
-
-
- --
- Erik Duus - exd@genrad.com | The above opinions are mine, not those
- 508-369-4400 x3207 | of my employer.
-