home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!math.fu-berlin.de!ira.uka.de!news.belwue.de!news.uni-stuttgart.de!rz.uni-karlsruhe.de!rz.uni-karlsruhe.de!voeg
- From: voeg@rz.uni-karlsruhe.de (Tobias Voegele)
- Newsgroups: comp.dsp
- Subject: Tektronix 2212 a.IEEE488.2 ??
- Date: 27 Jan 1993 17:01:36 GMT
- Organization: University of Karlsruhe, Germany
- Lines: 40
- Distribution: world
- Message-ID: <1k6f5gINNq5d@nz12.rz.uni-karlsruhe.de>
- NNTP-Posting-Host: ifh-hp1.bau-verm.uni-karlsruhe.de
-
- Hi all!
-
- I have some problems with programming a Tektronix 2212
- Oszilloskope throu an IEEE-488.2 Interface.
- The controler card is from National Instruments (AT-GPIB).
-
- When i use this Oszilloskope with the fastest Samplingrate
- 20Megasamples/sec in the Triggermode SGLSweep it will
- take 0.5 Secounds to read the waveform after the received
- MAV Bit.
- Is there someone who has experince in the Tektronix 2212
- and programming the IEEE488.2 Interface of this Skope?
- Or is there somone from Tektronix reading this Newsgroup,
- who can say me something about the Performance of the
- IEEE488.2 Interface in the Tektronix 2212?
- thanks in advance
-
- --
- tobias voegele
- voeg@rz.uni-karlsruhe.de
- md15@rz.uni-karlsruhe.de
-
- You can respond either to me or to the following adress:
-
- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
- - -
- Dipl.-Ing. Gerhard Bosch M.Sc.-------voice:(0721) - 608 3118 -
- Institute for Hydromechanik FAX:(0721) - 608 4290 -
- University of Karlsruhe -
- Kaiserstrasse 12 -
- 7500-Karlsruhe -
- Germany -
- - -
- - Internet: bosch@ifh-hp2.bau-verm.uni-karlsruhe.de -
- - Bitnet: nd07@DKAUNI2.BITNET -
- - X.400: S=bosch;OU=ifh-hp2;OU=bau-verm;P=uni-karlsruhe -
- - A=dbp;C=de -
- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-
-
-