home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: alt.cd-rom
- Path: sparky!uunet!charon.amdahl.com!pacbell.com!decwrl!elroy.jpl.nasa.gov!swrinde!zaphod.mps.ohio-state.edu!darwin.sura.net!newsserver.jvnc.net!newsserver.technet.sg!ntuix!eoahmad
- From: eoahmad@ntuix.ntu.ac.sg (Othman Ahmad)
- Subject: Re: Matsushita + SB-PRO = HELP!!!
- Message-ID: <1993Jan27.025138.7932@ntuix.ntu.ac.sg>
- Organization: Nanyang Technological University - Singapore
- X-Newsreader: TIN [version 1.1 PL8]
- References: <1993Jan26.100912.10569@ac.dal.ca>
- Date: Wed, 27 Jan 1993 02:51:38 GMT
- Lines: 34
-
- 07pccl@ac.dal.ca wrote:
- : Good morning - the Lurker speaketh...HELP! I've read the FAQ, but I can't seem
- : to find a solution. I have a new Matsushita CR-521 (not a speed demon, but hey - -
-
- I believe we have the same drive.
- : like the K-car, it gets ya where ya wanna go) and a SB-PRO. I have the cables
- It is fast enough for me.
- : connected properly (light comes on at boot-up), but, I get an error message
- : saying that the drive and/or card aren't ready. I've figured that a jumper
- At what state is this? Is it after autoexec had been executed?
-
- : has to be set on the card, but which? how? I should point out that the drive
-
- Why don't you post your config.sys and autoexec.bat?
- When you install the disk, can you see the green light on?
-
- : is an OEM model I bought from a supplier (I work at a campus computer store),
- : and there was no FM to read. They have no experience with a SBPRO, so I'm on
- : my own. Does anyone out there know what I should do? I THINK I have the proper
- : lines set up in config.sys and autoexec.bat, but if anyone has a similar setup
- : I'd appreciate some feedback. E-mail or post here. If I get E-mail, I'll
- : summarize. Thanks!
-
-
- : Craig Levine clevine@ac.dal.ca
- : Dalhousie University or
- : Halifax, N.S. Canada 07pccl@ac.dal.ca
-
- --
- Othman bin Ahmad, School of EEE,
- Nanyang Technological University, Singapore 2263.
- Internet Email: eoahmad@ntuix.ntu.ac.sg
- Bitnet Email: eoahmad@ntuvax.bitnet
-
-